Faces behaving strangely

When editing the faces of, say Allan, and going into the "Confirm faces" mode, all faces have a "click to confirm" text and all is fine. But then when I click someone who is not Allan, say I click Anne, the text reads "not Anne". Why? It should say "not Allan" because I'm editing Allans faces
Anyway if I click one more time on the face of Anne it reads "Ann", and I think all is fine. I exit out of Allan and back to all faces then back to editing Allan again and behold Anne has been added to the faces of Allan!?
I switched from iPhoto to Aperture because I felt that after the last iPhoto upgrade, Faces started to function very poorly. But it seems like Aperture has gotten the same "downgrade" of the Faces function.
Is anyone else experiencing this kind of trouble with faces?

Actually I had exactly the same problem the other day. In the end, I fixed it by deleting the Faces.db inside the Aperture Library, essentially removing all the faces forcing me to start al over naming faces. Absolutely not an elegant solution, so I wouldn't recommend it.
Personally I feel it's a bug. Did you sent feedback top Apple already?

Similar Messages

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Has anyone ever encountered layer blend modes behaving strangely?

I use photoshop quite a bit for retouching and photo compositing. Tonight I encountered a strange problem. I was trying to create a vintage look on a photo and had a number of adjustment layers including a curves, levels, color fill and there were also a few texture/noise layers all set to varying opacities. Near the top of all this I had a vignette layer that was black around the edges and white in the center set to blend mode of multiply. Well, when I was clicking on and off I realize that that vignette layer was definitely lightening the center part of the overall image quite a bit (the part that is white on the vignette layer), almost like a screen. So I flipped the vignette layer through different opacity modes and saw that there was no change in its behavior, every mode was screening the white, even darker color and multiply. I thought maybe it was interacting in a weird way with one of the other layers so I turned all the others off except the back ground-- still no change. Then I dropped the layer down one at time until it was below the background. When I started to move it up again, it was behaving normally for a moment until I moved it up a couple levels in the stacking order and then it went back to the screen behavior. Anyway I shuffled it around a bit but there was no consitency to when it would display the correct opacity and when it wouldn't, so it did not seem to be an interaction with any specific layer. I don't know, but I can't really think of any case where white set to multiply should produce a lighter result even if it were interacting with another opacity. In any case it does seem to me that there is something going on with the overall computation of opacities. I tried creating a new black and white layer and it was also doing the same thing, behaving strange and not displaying the correct opacity.
I'm tired, so I'm going to bed. I'm going to shut off the computer and hope this goes away when I reboot, but if it does not, does this sound familiar to anyone? I'm not a regular visitor to this forum, but I thought I'd put it out there in case anyone else has experienced anything like this. I've only got 5 gigs of ram on this computer and I've been working away for a while... maybe photoshop just couldn't keep up(?) I'm using Photoshop CS5, RGB Adobe 1998 colorspace. I've never had anything like this happen in the last 11 years I've been using photoshop. Hmmm.... hope I don't have to reinstall or call support or worse. fingers crossed.

Nevermind. It is still having the problem. I have to think that this file is just corrupt somehow because I just opened another file and can't seem to cause the same problem. Basically, I can fill a layer with white, put it to a blend mode of multiply or darker color and it will block out everything of the image below, ie totally opaque. The opaqueness varies depending on the if there are other layers also on blend modes, but it does not seem to correspond to normal blend mode interaction. If I put it right on top of a regular layer with an image on it, it totally blocks it out on a blend mode of multiply... weird. I am going to scrap this file and see if the problem recurs in other files. My 2006 Mac Pro is getting some years on it and has been running pretty slow. I'm not a hardware expert but I've done everything I know how to do to maintain it. Was thinking of upping the ram to see if I can hold out a bit longer before I upgrade the computer. Wouldn't surprise me if this problem is related to the computer.

Metronome behaving strangely

When I press the record button in GB 3.0.4 The level meter displays a pulsing level, but I hear no sound for the metronome until I depress a key on my MIDI keyboard. This remains true whether I have it set to "Count In" or not. Another curious problem is that if I set the metronome to play during both Playback and Recording, I don't hear it during playback, until it reaches a region. For example, if I start playing from m. 1 but no instruments enter until m. 2, I don't hear the click start until after the instruments enter.
Anyone else having this problem? Any ideas what might be causing it?
Thanks,
Michael

Hangtime, thanks for your help, but the issue isn't the volume of the metronome. Normal GB functionality is that if you have Metronome selected to be "on," then when you click on the Record button you immediately hear the metronome, as well as see the click registering on the meter. I don't hear it, even though it is registering on the meter, until I depress a key on my MIDI keyboard. Then I hear it just fine. I've been working with this software since version 1 came out, and I've never had this problem before. I also have Sibelius, Logic, and Reason, so I am wondering if I may have unknowingly tweaked some setting that is making MIDI in GB behave strangely.

Why is my MacBook display behaving strangely?

I am using an alumin(i)um MacBook (13", late 2008 model with multi-function glass trackpad). In the past couple of weeks, the display has started to behave strangely. The screen seems to freeze (meaning any mouse movements or keystrokes do not display), and then the screen begins to fade to grey. It seems to be resolved by tilting the display until the MacBook "wakes". There has also been some occasional flickering of the display, although far less frequent. Could someone help me with this? Is it something like a loose connection, and, if so, how should I deal with it? (The MacBook is now out of warranty, so my next step would be my local Apple store). Thanks in advance!

Same thing happening to me - began about four weeks ago, two weeks after warranty expired. Has gotten to the point where it's difficult to use the computer - don't get through composing an e-mail before it starts to fade - now know that even though computer display is frozen, the keystrokes are still getting through, so be careful what keys you press trying to get it to pay attention!
I believe it's going to turn out to be a connection problem between the computer and the display in the hinge area. I found out yesterday that as it freezes, and I start to pick it up off my lap and put it aside, if I pick it up with my left hand near the lower left of the keyboard and my right hand behind the display, down low near then hinge, and pulling slightly towards me, this fixes it (for a while), and this is (for me) the most reliable way to wake it back up. I've seen references elsewhere to this being a simple problem where a connection is maintained with a black foam pad to provide pressure to the connection. I think the foam must degrade or lose resiliency (apparently at 12.5 months from purchase!) and there may be a simple solution available. When I figure it out for this particular model, I'll post my conclusions.

My Macbook Air behaves strangely with my USB devices.

Hello! My Macbook Air behaves strangely with my USB devices. They appear in the Finder but the icon then quickly disappears, as if the device has never been connected. Sometimes the devices work fine, however. Could you please help me identify the problem?

USB draws power from the MBA, and MBA will shut them down if too much is taken. Try a self-powered (not USB-powered) hub, to see if the AIr acts better. Costs about $25 at BestBuy.
May not tbe the final solution, but no a bad idea anyway.

Finder behaving strange

Hi everybody,
After upgrading to Mac OS X 10.10 Yosemite, my Finder is behaving strange. Every time I open op a new Finder window, it appears like below image. The icons look very strange and they are not clickable, well you can click something and notice a change in the window name in the top.
I really don't know what is happening, nor don't I know what to search for, to find a solution, as I even can describe i properly.
My Mac specs is as below:
I hope some of you guys might be able to help!
Love and cheers!
Kenn Nielsen,
Denmark

Is Dropbox the only application you are seeing this in? Try the list and column view to see if you get the same thing.
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About

After waking from sleep bluetooth mouse behaves strangely

Hello
I have this issue . First of all i have Allow bluetooth to wake from sleep but it doesn't happen but i don't really care about that.
Most important thing is that after waking up from sleep my mouse has lag when moving , the mouse behaves strangely and movement of mouse is not natural .Restarting or shutting down doesn't fix it .
Anyone knows why this happens?

Try resetting the PRAM and SMC.
Barry

Add-On behaves strange on different clients !

Hi all,
I created an add-on and tested it on a "Windows 2000 server" installed client and works perfect. It also works on a client with XP Pro Turkish SP2, .Net 1.1
BUT it behaves strange on different clients e.g
Client 1 (XP Pro Turkish, .Net 1.1)
+*Add-on setup screen appears, installation ends succesfully
*Files are copied in Sap Manage/Sap Business One/AddOns folder.+
But
1- The green status bar confirmation doesn't appear .
2- Add-on isn't listed under Add-On Manager menu point.
So I can't run the add-on anyhow, even it's configured as automatic.
Client 2 (XP Pro English SP2, .Net 1.1)
+*Add-on setup screen appears, installation ends succesfully
*Files are copied in Sap Manage/Sap Business One/AddOns folder.
*The green confirmation appears in status bar.
*Add-on is listed under Add-On Manager menu point and I can start the add-on.+
BUT the add-on doesn't work , I mean it doesn't do what it should normally do, e.g. add 2 submenus in main menu, etc.
For all these add-on installations I use the same Add-On setup ard and exe files.
Any help/tip would be greatly appreciated,
Gü

Hello there
We have finally succeeded in solving the Menu creation problem.
I hope you have the same issue as we, so I will be able to help you.
Just to make sure...
We have developed an add-on composed of some menues and after installing it, we noticed that in some stations, the menu was not creaed, though the add-on showed that It was connected.
Actually the problem is that the application doesnt succeed in connecting to the DI.
our "add menu" method was called after calling to "company.connect()"
whice was stuck during the try to connect to the company.
thus- it never arrived to the "add menu"
What you should do is, go to a working client:
1. start --> ran
2. %temp%
you will find there a directory called: SM_OBS_DLL
copy it, and replace it with stations that dont work.
3. It should solve the problem.
rgds
Hagai

Sometimes it behaves strangely

In the last few days, my shuffle started behaving strangely. I bought two albums from iTMS, Madonna and System Of A Down.
They both play well on my powerbook, but on shuffle not so well (and since I paid, "not so well" is not good).
Pausing a song, does not pause, but simply stops; when I press play, it skips to the next song, either in shuffle mode or in play mode.
And, most important of all, one song (Madonna, Get Together), locks the iPod: it plays well, but at the end (I suppose when it updates play count) I hear a click, like a static electric wave, green light is on and the only thing I can do is turn off (another click) and wait for few seconds.
Yesterday I reset my shuffle, re-installed last version software, but nothing happened.
Has anyone had a similar behaviour?

It actually sounds like the problem is with those particular files, not with the shuffle (if other purchased songs work fine on the shuffle. You can contact the iTMS customer service and tell them about the problem. They may offer you a refund or let you download new fixed verions of theose songs.
You can contact them through the form at the bottom of this page:
http://www.apple.com/support/itunes/musicstore/ipod/

Session mechanism behaves strangely

hi;
i am developing a site for a foundatiion, there exists some services which is based on log-in, when the user logs in i create a session object and assign a string attribute named "memberId"
when i request a page by GET method my session is checked and a form is returned if successfull else it is forwarded to a warning page, however after i got the form and submit it (form is handled by same servlet's doPost method) the code below
HttpSession session = request.getSession(false);
String memberIdStr = (String) session.getAttribute("memberId");
causes the session to be null ! and raises nullpointerexception,
as a conclusion the session works well for GET requests, but behaves strangely if the request method is POST
can anyone help me...
thanx in advance...

no i am ussign cookies for transferring sessionid, let me send the servlet class
public class PlantGiftController
extends HttpServlet {
public void doGet(HttpServletRequest request, HttpServletResponse response) throws
ServletException, IOException {
//the user has already registered
//get his id from session
RequestDispatcher dispatcher;
HttpSession session = request.getSession(false); //a session really exists
String memberIdStr = (String) session.getAttribute("memberId");
if (memberIdStr == null) { //the user has not registered
String warningMsg = "not loged in";
request.setAttribute("warningMsg", warningMsg);
dispatcher = application.getRequestDispatcher(
"/common/warning.jsp");
dispatcher.forward(request, response);
else {
int id = Integer.parseInt( (String) session.getAttribute("memberId"));
try {
MemberBean member = db.getMemberById(id);
request.setAttribute("member", member);
catch (Exception ex) {
throw new ServletException(ex);
dispatcher = application.getRequestDispatcher(
"/plantGift/plantGiftForm.jsp");
dispatcher.forward(request, response);
//Process the HTTP Post request
public void doPost(HttpServletRequest request, HttpServletResponse response) throws
ServletException, IOException {
RequestDispatcher dispatcher;
HttpSession session = request.getSession(false); //session is set to null
MemberBean member = null;
if (session == null) { //the user has not registered
String warningMsg = "please log in
request.setAttribute("warningMsg", warningMsg);
dispatcher = application.getRequestDispatcher(
"/common/warning.jsp");
dispatcher.forward(request, response);
else {
int id = Integer.parseInt( (String) session.getAttribute("memberId"));
try {
member = db.getMemberById(id);
request.setAttribute("member", member);
catch (Exception ex) {
throw new ServletException(ex);

Safari behaves strangely after upgrading to Lion

After upgrading to Lion, Safari is behaving strangely. When re-opening Safari after quitting, all windows from previous session re-opens. It didn't used to happen and also quite annoying. How can that be fixed? I only want my homepage to open, if I individually quit the windows by the red x-button, and then quite Safari normally, it opens up as priviously. Any ideas?
thanks

It is one of the over 250 new features of the World's Most Advanced Operating System called Resume.
If this is all that's bothering you just close all windows before quitting Safari or hold Shift when you launch Safari
If the whole resume thing is overbearing then...
Also in System Preferences > General there is a hard-to-find checkbox under "Number of recent items" you can turn off.
Also, you can hold the shift key to disable resume on a one time basis.
If you want to turn it off on a per app basis, (TextEdit is by example, replace TextEdit with the name of the app)
Launch Terminal and copy/paste this at the prompt...
defaults write com.apple.TextEdit NSQuitAlwaysKeepsWindows -bool false
Press return.
YOu can aslo accomplish this thriugh the GUI by going to ~/Library/Saved Application State/TextEdit and delete that file/
To turn off Resume globally...
chflags uchg ~/Library/"Saved Application State"
Press return
The reverse of the first one is to replace false with true.
The reverse of the second one is
chflags nouchg ~/Library/"Saved Application State"
Again, you can accomplish this through Finder by going to ~/Library/Saved Application State and deleting the folder.

Extractor 1_co_pa_* behaving strangely

Hi,
I am facing a very strange problem
Extractor 1_CO_PA_* has been enhanced in CMOD, and a query is written which is now behaving strangely.
CLEAR : w_tabix1.
t_copa[] = c_t_data[].
SELECT vbeln matnr pstyv vertn posnr kvgr2 kvgr1 fbuda abrbg netwr fkimg
              INTO TABLE it_vbrp
              FROM vbrp
              FOR ALL ENTRIES IN t_copa
              WHERE vbeln = t_copa-rbeln
                AND matnr = t_copa-artnr.
*                AND pstyv IN ('ZB2S','ZB23','ZB2M','ZB2Y','ZD2S','ZD23'
*'ZD2M','ZD2Y','ZI2S','ZI23','ZI2M','ZI2Y').
we have not moved any changes to production. yet out of blue, only for 48000 records in t_copa table its fetching 17million entries, thus giving memory dump.
thanks.

Hi,
Please give more details, so we can help.

Hi I have recently bought I pad 4 ... It is behaving strange... It's damaging power. I to not charging and even tried other iPad charges becoming hot and not charging. Pls help

Hi I have recently bought I pad 4 ... It is behaving strange... It's damaging power adapters, I is not charging and even tried other iPad charges they are alao behaving the same way. becoming hot and not charging. Pls suggest what should I do.?

Take it back to where you bought it for replacement or refund.

Adobe air installer problem. app behaving strange

Hi all
i developed a desktop app in flex..In this i set the alpha of a text input /text area to alpha=0
.the app is behaving different..on different pc's..i executed to debug the app on my pc on setting the alpha=0 for text input the background becomes transparent and i was able to write text with alpha not effecting the text in the text input...then i copy the code to another pc install the adobe air installer and debug the code again ..now what i see was lil strange that the alpha property also effects the text contained in the text input...
chk the link below too
http://forums.adobe.com/thread/526301?tstart=0
can any body tell me whats happening or it depends upon the adobe air installer .
I installed the adobe air installer on my pc 1 and a half month back..on the other pc i installed 2 weeks back..
where is the problem?
thanks

If you need it for the usage meter, instructions here > http://usagemeterapp.comcast.net/air.html
Repair permissions prior to installing Adobe Air.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Repair Disk Permissions
This process can take a few minutes.
Quit Disk Utility when it's finished then try installing Adobe Air.
FAQ's for > Xfinity Usage Meter Application

Faces behaving strangely

Similar Messages

Maybe you are looking for