Failure on picture import LR4
I am trying to import raw images (.CR2) with option to convert to DNG. I can see the images in the preview panel in the middle, but when I click the Import button, the progress bar zooms across in just 1 or 2 seconds and presents me with a window that says 'The following files were not imported because they could not be read (202)' The 202 was the number of pictures that I had in the camera. And then the numeric groups of pictures were listed. I did format the SD card in this camera, a Canon S100, before I began taking pictures.
I am trying to import raw images (.CR2) with option to convert to DNG. I can see the images in the preview panel in the middle, but when I click the Import button, the progress bar zooms across in just 1 or 2 seconds and presents me with a window that says 'The following files were not imported because they could not be read (202)' The 202 was the number of pictures that I had in the camera. And then the numeric groups of pictures were listed. I did format the SD card in this camera, a Canon S100, before I began taking pictures.
Similar Messages
-
New LR5 did not import LR4 pictures
I've read several other threads regarding this and none seem to answer a very basic question:
I have thousands upon thousands of pictures in LR4 that did not automatically go into LR5 just now (no import window opened up when I first started the program).
Is there some way I can just get it all done at once?Okay, found it. There were so many .lrcat files to pick from, but apparently the rest were all backups. It's working now. Thank you for your help, but I had one more question:
Once this is done in a few minutes and I make sure it's all within LR5, is it reasonably safe to get rid of the .lrcat backups and the main one as well? -
I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.
I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still -
Dear All,
We have completed the fresh installation of Soman7.1.
Now , We are doing the "Configuration of the Solman" and we are in the Step "Basic configuration ".
SID: SMI
Hostname: Solmantrg
Solman version: 7.1
The SSO Setup is failing with below error.
Message :
A failure occured while connecting to ABAP stack on solmantrg.thetimes.co.in sys=01 client=001 user=null. Details : 'user' missing
Details of the Log
Found SID for SSO ACL entry : SMI
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tc~webadministrator~solmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
ABAP SSO ticket certificate of SMI was imported in ABAP PSE of solmantrg.thetimes.co.in (client 001)
The ABAP SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=SMI LoginTicketClient=001)
A failure occured while importing Java SSO ticket certificate in ABAP stack
!! Exception : FOREIGN_ENQUEUE_LOCK(Abap cause=SOLMAN_ADMINE_TABLEE)
The ABAP instance profile contains the parameter : login/accept_sso2_ticket=1
The SSO ticket Certificate <CN=SMI> has been successfully imported into Java Keystore
The com.sap.security.core.server.jaas.EvaluateTicketLoginModule already contained the entry : trustedsys=SMI, 001 trustediss=CN=SMI trusteddn=CN=SMI
The Authentication template for component sap.com/SQLTrace*OpenSQLMonitors was already set to ticket
The Authentication template for component sap.com/SQLTrace*SQLTrace was already set to ticket
The Authentication template for component sap.com/tc~monitoring~systeminfo*monitoring was already set to ticket
The Authentication template for component sap.com/tc~monitoring~systeminfo*sap_monitoring was already set to ticket
The Authentication template for component sap.com/com.sap.security.core.admin*useradmin was already set to ticket
The Authentication template for component sap.com/tc~webadministrator~solmandiag*smd was already set to ticket
The Authentication template for component sap.com/tc~smd~e2etraceupload*E2EClientTraceUploadW was already set to ticket
The com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule already contained the entry : trustedsys=SMI, 001 trustediss=CN=SMI trusteddn=CN=SMI
The Authentication template for component sap.com/tc~smd~EemAdminGateway*EemAdmin_Config1 has been set to evaluate_assertion_ticket
The Login Module BasicPasswordLoginModule was added to the security component sap.com/tc~smd~EemAdminGateway*EemAdmin_Config1
A failure occured while connecting to ABAP stack on solmantrg.thetimes.co.in sys=01 client=001 user=null
!! Exception : 'user' missing
The ABAP instance profile contains the parameter : login/create_sso2_ticket=2
Exception
com.sap.mw.jco.JCO$AbapException: (126) FOREIGN_ENQUEUE_LOCK: FOREIGN_ENQUEUE_LOCK
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1512)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3937)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3570)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.addTrustedIssuer(AbapSysRfcAdapter.java:276)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.addTrustedIssuer(AbapSysRfcAdapter.java:249)
at com.sap.sup.admin.setup.ManagingServices.setupDualStackSSO(ManagingServices.java:752)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:564)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:445)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:674)
at com.sap.sup.admin.setup.ws.SetupWrapper._diagSetup(SetupWrapper.java:279)
at com.sap.sup.admin.setup.ws.SetupWrapper.diagSetup(SetupWrapper.java:21)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.JavaClassImplementationContainer.invokeMethod(JavaClassImplementationContainer.java:76)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
========================
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1087)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3310)
at com.sap.sup.admin.setup.CommonServices.getJcoClient(CommonServices.java:773)
at com.sap.sup.admin.setup.CommonServices.getJcoClient(CommonServices.java:722)
at com.sap.sup.admin.setup.SolManRfcAdapter.getJ2eeSsoSettings(SolManRfcAdapter.java:649)
at com.sap.sup.admin.setup.ManagingServices.updateSSOfromURLrepository(ManagingServices.java:790)
at com.sap.sup.admin.setup.ManagingServices.setupDualStackSSO(ManagingServices.java:773)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:564)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:445)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:674)
at com.sap.sup.admin.setup.ws.SetupWrapper._diagSetup(SetupWrapper.java:279)
at com.sap.sup.admin.setup.ws.SetupWrapper.diagSetup(SetupWrapper.java:21)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.JavaClassImplementationContainer.invokeMethod(JavaClassImplementationContainer.java:76)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
In strustsso2, cerficate date is valid only.
kindly help us to fix this SSO_Setup issue
Thanks and Regards,
Gayathri.KHi ,
Thanks for the above reply.
I have executed the Step 2.3 AND 2.4 and i started the SSO Setup again. Still i am getting below error
Message
A failure occured while importing Java SSO ticket certificate in ABAP stack
Details Of the Log
Found SID for SSO ACL entry : SMI
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tc~webadministrator~solmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
ABAP SSO ticket certificate of SMI was imported in ABAP PSE of solmantrg (client 001)
The ABAP SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=SMI LoginTicketClient=001)
A failure occured while importing Java SSO ticket certificate in ABAP stack
!! Exception : FOREIGN_ENQUEUE_LOCK(Abap cause=SOLMAN_ADMINE_TABLEE)
The ABAP instance profile contains the parameter : login/accept_sso2_ticket=1
The SSO ticket Certificate <CN=SMI> has been successfully imported into Java Keystore
The com.sap.security.core.server.jaas.EvaluateTicketLoginModule already contained the entry : trustedsys=SMI, 001 trustediss=CN=SMI trusteddn=CN=SMI
The Authentication template for component sap.com/SQLTrace*OpenSQLMonitors was already set to ticket
The Authentication template for component sap.com/SQLTrace*SQLTrace was already set to ticket
The Authentication template for component sap.com/tc~monitoring~systeminfo*monitoring was already set to ticket
The Authentication template for component sap.com/tc~monitoring~systeminfo*sap_monitoring was already set to ticket
The Authentication template for component sap.com/com.sap.security.core.admin*useradmin was already set to ticket
The Authentication template for component sap.com/tc~webadministrator~solmandiag*smd was already set to ticket
The Authentication template for component sap.com/tc~smd~e2etraceupload*E2EClientTraceUploadW was already set to ticket
The com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule already contained the entry : trustedsys=SMI, 001 trustediss=CN=SMI trusteddn=CN=SMI
The Authentication template for component sap.com/tc~smd~EemAdminGateway*EemAdmin_Config1 has been set to evaluate_assertion_ticket
The Login Module BasicPasswordLoginModule was added to the security component sap.com/tc~smd~EemAdminGateway*EemAdmin_Config1
The ABAP instance profile contains the parameter : login/create_sso2_ticket=2
Exception
com.sap.mw.jco.JCO$AbapException: (126) FOREIGN_ENQUEUE_LOCK: FOREIGN_ENQUEUE_LOCK
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1512)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3937)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3570)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.addTrustedIssuer(AbapSysRfcAdapter.java:276)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.addTrustedIssuer(AbapSysRfcAdapter.java:249)
at com.sap.sup.admin.setup.ManagingServices.setupDualStackSSO(ManagingServices.java:752)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:564)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:445)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:674)
at com.sap.sup.admin.setup.ws.SetupWrapper._diagSetup(SetupWrapper.java:279)
at com.sap.sup.admin.setup.ws.SetupWrapper.diagSetup(SetupWrapper.java:21)
at sun.reflect.GeneratedMethodAccessor2202.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.JavaClassImplementationContainer.invokeMethod(JavaClassImplementationContainer.java:76)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Also , i have checked the note # 1008474 Diagnostics Setup Wizard uses wrong ABAP client.
As mentioned in above note, i have checked in visual admin all settings are maintained correctly.
RFC destination WEBADMIN & SOLMANDIAG is also working fine.
please tel why i am getting Foreign Enquelock
Regards,
Gayathri.K -
Picture import not working in PSE 7/8 and windows 7
Hello
I just updated to win 7 (64 bit) and now I can't get the picture import from my camera working correctly with PSE7. When I plug it in windows ask me how I like to import them and I chose elements but nothing happens. I had no problem with this in Vista before. I have tried the trial version of PSE 8 but I have the same problem with that. The only way I can import my pictures is by starting organizer and select import from there.
Thanks for any help!On 64-bit Vista and XP, you can't use the Adobe Photo Downloader with Windows Autoplay:
http://kb2.adobe.com/cps/402/kb402507.html
It's likely that 64-bit Windows 7 has the same restrictions. A workaround is to download Windows Live Photo Gallery and use its downloader, which is pretty good. Then in PSE, use File > Watch Folders to automatically import photos from the folder hierarchy where you're downloading the photos. -
Pictures importing out of numerical sequence
Anyone experiencing pictures importing out of numerical sequence in Aperture 3.0.1..??
Solutions...?? Bug..??
Gerry....Thanks for your reply DLS,
I had tried that, I have 'date' and 'ascending' selected. Its only happened on one project and its not really any bother to re-arrange them, but I was curious why...?
It's a project I imported from my MBP, it's in the correct sequence on my MBP...
Any idea's...
Regards
Gerry..... -
Why does get-attachment 1aspx appear on pictures imported from Iphoto
Pictures imported from Iphoto into Imovie not as clear as originals. There is a note with each picture ...get-attachment 1aspx. Could this be the reason? What does this message mean?
iPhoto shows you the image at full resolution. If the image is tiny then it's tiny.
You can magnify an image by 300%. In edit mode hold the option key and tap the 2 or 3 button. -
Every geotagged pictures imported labelled as Unknown Place
Hi have lately installed iPhoto 8.0 (from iLife '09) and I like it a lot. I already had some of my pictures that were geotagged (the pictures took from my iPhone) but iPhoto does not name the place for them. They all appears as "Lieu sans nom" (or Unknown place in English...I am operating in French).
I did verified in the iPhoto preferences and the "search for place" is set to "automatically". I also tried to export, rename and reimport without success. The pins are correctly positioned but since the place is not named, I cannot use the browse feature (by country, states, etc.).
What I am doing wrong?I tried to see if there were strange location properties using EXIF Viewer and everything seems fine. There is noting defined in the location. Just plain good latitude & longitudes. Just FYI, you do not need EXIF viewer to verify this. You just have to show the image properties from iPhoto.
One development. The same pictures on another computer gives perfect results. The location are identified correctly and there is no more Unknown location.
I tried to rebuilt my whole library from scratch using iPhoto Library Manager and it gives the same exact result. Again, the same original pictures imported into another computer works perfectly so I don't think that this issue comes from the pictures. Furthermore, to rebuild the library from scratch do not help.
Can you help me? -
How can I delete pictures imported on my ipad from my camera with usb jack ?, How can I delete pictures imported on my ipad from my camera with usb jack ?
I have hundreds of pictures and I want to delete completely the imported files.
ThanksThe links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom -
IMovie picture import or render failure
Hy
My goal: To import some pictures into iMovie. Maby add ken burns efects to them, add a bit of narration and some music, edit everything and export.
The problem: Let say I use the following method: i click Media tab, then i click photos, then i select the photo, and in the Photo Settings click apply. iMovie then imports the photo, puts it in the timeline and then the dark red bar bellow apears (the one that would means rendering). The problem is, there is no light red getting over it (that would indicate rendering in progress). It's the same if i click and drag a photo into the clip browser (only the dark red is displayed on the bottom of the thumbnail). If i try to quit iMovie it warns me that rendering is in progress.
It doesn't matter how big a photo is (i tried 300x200px, 800x500px, 1500x1000px, 3000x2000px) or what format (jpg, tiff, png).
I tried restarting the application and the sistem. I created another user to try if anything changes. I erased the preferences. I even tried copying the whole application from frend's computer (the same version and all). The dark red bar doesn't start to fill red (i checked in the terminal how much processor does it eat and it's on 7%, so it probablly means it's doing nothing)
I have a 2Ghz, 2GB of ram Macbook 13" Intel core duo. I have 67 GB of space left (format: Mac-os extended - journaled), running OS-X 10.4.8 and updated to the latest updates. iMovie version is 6.0.3 (267.2).
What else is there to do? Would reinstalling the whole sistem help and is there a way to keep all of my preferences and mail accounts and contacts, … in case i have to do that?
thx in advance
Peter
Macbook 13" Mac OS X (10.4.8)I am having the identical problem and its driving me crazy. This started happening to me after I installed new hard drives and reinstalled the OS. I then transfered all the old settings from the old drive. Everything else seems to work perfectly. If you get anywhere with this let me know.
Hy
My goal: To import some pictures into iMovie. Maby
add ken burns efects to them, add a bit of narration
and some music, edit everything and export.
The problem: Let say I use the following method: i
click Media tab, then i click photos, then i select
the photo, and in the Photo Settings click apply.
iMovie then imports the photo, puts it in the
timeline and then the dark red bar bellow apears (the
one that would means rendering). The problem is,
there is no light red getting over it (that would
indicate rendering in progress). It's the same if i
click and drag a photo into the clip browser (only
the dark red is displayed on the bottom of the
thumbnail). If i try to quit iMovie it warns me that
rendering is in progress.
It doesn't matter how big a photo is (i tried
300x200px, 800x500px, 1500x1000px, 3000x2000px) or
what format (jpg, tiff, png).
I tried restarting the application and the sistem. I
created another user to try if anything changes. I
erased the preferences. I even tried copying the
whole application from frend's computer (the same
version and all). The dark red bar doesn't start to
fill red (i checked in the terminal how much
processor does it eat and it's on 7%, so it probablly
means it's doing nothing)
I have a 2Ghz, 2GB of ram Macbook 13" Intel core duo.
I have 67 GB of space left (format: Mac-os extended -
journaled), running OS-X 10.4.8 and updated to the
latest updates. iMovie version is 6.0.3 (267.2).
What else is there to do? Would reinstalling the
whole sistem help and is there a way to keep all of
my preferences and mail accounts and contacts, … in
case i have to do that?
thx in advance
Peter
Macbook 13"
Mac OS X (10.4.8) -
Convert picture imported to Word document with VBA
I've Word documents that contain acronyms and a macro that searches the document for them so that they can be identified for an acronym table. So far, I can search a document's text and tables but not the pictures with the macro. I've found that if
I manually select the picture, right click and select group->ungroup, I get a MsgBox with the message "This is an imported picture, not a group. Do you want to convert it to a Microsoft Office drawing object?" Selecting the yes button converts
it into many Shapes objects that are then searchable.
I've determined that the picture (object) type prior to conversion is msoPicture and that it gets converted to an msoCanvas object with many Shape objects on it.
I've built a macro that can loop through various Canvas objects and then the Shape objects to find the acronyms. Unfortunately, I haven't been able to find a way to convert the image/object from msoPicture to msoCanvas in VBA. Does anyone know how to do
this? Thanks.Hi,
As far as I know, we can’t convert a picture to canvas through VBA.
For that process through the UI, I think it add the canvas first, then add the picture to that canvas.
For your requirement, you could add the canvas first, then add the picture to tat canvas.
Sub NewCanvasPicture()
Dim shpCanvas As Shape
'Add a drawing canvas to the active document
Set shpCanvas = ActiveDocument.Shapes _
.AddCanvas(Left:=100, Top:=75, _
Width:=200, Height:=300)
'Add a graphic to the drawing canvas
shpCanvas.CanvasItems.AddPicture _
FileName:="C:\Program Files\Microsoft Office\" & _
"Office\Bitmaps\Styles\stone.bmp", _
LinkToFile:=False, SaveWithDocument:=True
End Sub
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to resolve failures in picture transfers?
When saving scanned pictures into iPhoto library, occasionally the picture will not transfer after I click Save. How can I resolve this occasional failure to transfer?
Message was edited by: ModeratorProbably post to the iPhoto forum area may be a faster solution:
http://discussions.apple.com/category.jspa?categoryID=143 -
Problem with iPhoto pictures imported into Aperture 3
I recently put together few thousand pictures I had in iPhoto with several other thousands I had on Aperture 3.
I just realized the pictures I imported from iPhoto have all a litle exclamation mark with an arrow just like this:
When I try to export any of these images, or create a book, or email them it gives me an error message just like this:
When I imported the pictures, I drag them into Aperture. Not sure what happened and why the original files were not imported as well.
Can anyone help? Thx!This looks like your iPhoto Library may have been a referenced library - check, if the iPhoto preferences "Advanced" settings are set to "Importing: Copy items into the iPhoto Library". If this option has been unchecked, when you imported to iPhoto, your iPhoto Library references the images and does not include them. And if you import a referenced library to Aperture these images also will be referenced in Aperture.
How exactly did you import from iPhoto to aperture, and what are your iPhoto and Aperture versions? Where are the libraries located that you importet? On an external volume?
Try, if the links become active, when you connect the external volume again.
Regards
Lèonie -
Pictures importing in Muse very bad!
Hi everyone,
when i import a picture in Muse, jpg png etc, the quality is pretty poor and not acceptable for me. Can anyone please help me? I searched for tips, but nobody can help me.
Thank you very much!Your images should always be made the correct size and at the right resolution before inserting.
A mistake that some make coming from print is having the images at 300 DPI. This does not make the image any better on a screen and only increases file size which of course Muse tries to optimize for you. If your images are the size you need and 72 DPI before adding them you will have no problem.
If you are still having the problem post a link so that we can see the problem. -
I have tried many times to import a jpg picture that I want to use as a background for a audiotrack so I can export it as a movie.
How do I do it properly? I have drag and drop'ed but it wont work. Is it a known bug?I have tried with about 50 different photoes from iPhoto and I have also tried som various settings in Photoshop CS4... Its really strange!
Message was edited by: Morten Hjort
Maybe you are looking for
-
Can't open fcp file-HELP!!!
after working on a tracksheet with no problems for a month it suddenly won't open - at about 27% open, it stops loading and i get general error (41) - any ideas? HELP!!!!!!! - I've GOT to get in this thing! thx!
-
Special Characters in SAP R/3 System
Hi All, I need some help to handle the below situation. I need some help in XI. Below is the message from SXMB_MONI This is FILE to BAPI UPLOAD Scenario. The bolded characters above have special characters (First letter of the Bolded part). The value
-
hallo, after upload iPad air and iPhone 5 to iOS 8 (and few days ago Mac to Yosemite, version 10.10), I don't find in my iPad air and in my iPhone 5 photos I can see in iPhoto (version 9.6) on my Mac's Cloud. I tried to add manually from library to
-
Hi Experts, Pls advise. As per standard, while posting LC in F-57 (Vendor noted item) either there is no screen field for Profit center or it will not update the profit center value in the table after the item get posted. My requirment is, I have to
-
Why does my ipad2 flip pages without touching screen?
My ipad2 has issues with turning pages without touching the screen. Sometimes it happens in iBooks. It does not do it all the time. I did a reset and sold it to a friend. The iPad started crashing and acting crazy shortly after he did his transfer. W