Failure while attempting to install coldfusion 11 on win 2012.

On my windows server 2012, I have installed IIS (8.0), then; I attempted to install coldfusion 11. I am getting the following error:
Cannot configure IIS Connector. Enable the required options ASP.NET, CGI, ISAPI Extensions and ISAPI Filters in IIS under Windows Features and try again.
Has anyone gotten through this yet and can step me through.
I have been through server manager IIS and added ASP.NET 4.5 but I cannot find where to make the CGI, ISAPID changes at.
Everything I google is finding win 2008 and coldfusion 10, I attempt to follow those steps but they don't necessarily match 2012.
Any help would be appreciated as I am new to installing this software.

Hi,
Open Server Manager>Select Web Server>Application Development.Check the necessary component.
Hope this helps.
Thanks,
Priyank

Similar Messages

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Errors while attempting to install Spatial to Oracle Enterprise 11.2.0.3.0 - 64bit

I am attempting to manually install Oracle Spatial with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64 bit. It is my understanding that in order to install Oracle Spatial, that the following components are required:
1) Java
2) XML database
3) Oracle Multimedia (In Pre-11g versions, its called interMedia)
I was able to successful install the Java component running the following scripts when connected as sysdba:
alter system set "_system_trig_enabled" = false scope=memory;
>@C:\oracle\ora11\javavm\install\initjvm.sql
>@C:\oracle\ora11\xdk\admin\initxml.sql
>@C:\oracle\ora11\xdk\admin\xmlja.sql
>@C:\oracle\ora11\RDBMS\ADMIN\catjava.sql
>@C:\oracle\ora11\RDBMS\ADMIN\catexf.sql
After running all of these scripts, I run the following query:
select count(*), object_type from all_objects
where object_type like '%JAVA%' group by object_type;
I get the following results:
COUNT(*) OBJECT_TYPE
       332 JAVA DATA
       837 JAVA RESOURCE
     22958 JAVA CLASS
         2 JAVA SOURCE
I then run the following query:
select comp_id,version,status from dba_registry
     where comp_id in ('JAVAVM');
I get the following results which appears that Java component is now correctly installed:
COMP_ID
VERSION
STATUS
JAVAVM
11.2.0.3.0
VALID
After successful installing the Java component, I next attempt to install the XML component. I do this running the following scripts:
create tablespace XDB
datafile 'C:\ORACLE\ORADATA\ORA11\XDB1.DBF' size 50m autoextend on next 1m maxsize 4096m
extent management local
uniform size 1m
segment space management auto;
> @C:\oracle\ora11\RDBMS\ADMIN\catqm.sql XDB XDB TEMP
I get the following errors when running this script:
drop type xdb.xdbpi_im
ERROR at line 1:
ORA-04043: object XDBPI_IM does not exist
drop table xdb.xdb$path_index_params
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> drop view xdb.xdb$resource_view;
drop view xdb.xdb$resource_view
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> drop view xdb.xdb$rv;
drop view xdb.xdb$rv
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> drop indextype xdb.xdbhi_idxtyp force;
drop indextype xdb.xdbhi_idxtyp force
ERROR at line 1:
ORA-29833: indextype does not exist
SQL> drop operator xdb.path force;
drop operator xdb.path force
ERROR at line 1:
ORA-29807: specified operator does not exist
SQL> drop operator xdb.depth force;
drop operator xdb.depth force
ERROR at line 1:
ORA-29807: specified operator does not exist
SQL> drop operator xdb.abspath force;
drop operator xdb.abspath force
ERROR at line 1:
ORA-29807: specified operator does not exist
SQL> drop operator xdb.under_path force;
drop operator xdb.under_path force
ERROR at line 1:
ORA-29807: specified operator does not exist
SQL> drop operator xdb.equals_path force;
drop operator xdb.equals_path force
ERROR at line 1:
ORA-29807: specified operator does not exist
SQL> drop package xdb.xdb_ancop;
drop package xdb.xdb_ancop
ERROR at line 1:
ORA-04043: object XDB_ANCOP does not exist
SQL> drop package xdb.xdb_funcimpl;
drop package xdb.xdb_funcimpl
ERROR at line 1:
ORA-04043: object XDB_FUNCIMPL does not exist
SQL> drop type xdb.xdbhi_im force;
drop type xdb.xdbhi_im force
ERROR at line 1:
ORA-04043: object XDBHI_IM does not exist
SQL> drop type xdb.path_array force;
drop type xdb.path_array force
ERROR at line 1:
ORA-04043: object PATH_ARRAY does not exist
SQL> drop type xdb.path_linkinfo force;
drop type xdb.path_linkinfo force
ERROR at line 1:
ORA-04043: object PATH_LINKINFO does not exist
SQL> drop table xdb.xdb$workspace;
drop table xdb.xdb$workspace
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> drop table xdb.xdb$checkouts;
drop table xdb.xdb$checkouts
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> drop operator xdb.all_path force;
drop operator xdb.all_path force
ERROR at line 1:
ORA-29807: specified operator does not exist
SQL> drop function XDB.XMLIndexInsFunc;
drop function XDB.XMLIndexInsFunc
ERROR at line 1:
ORA-04043: object XMLINDEXINSFUNC does not exist
SQL> drop function XDB.XMLIndexLoadFunc;
drop function XDB.XMLIndexLoadFunc
ERROR at line 1:
ORA-04043: object XMLINDEXLOADFUNC does not exist
SQL> drop type XDB.XMLIndexLoad_Imp_t force;
drop type XDB.XMLIndexLoad_Imp_t force
ERROR at line 1:
ORA-04043: object XMLINDEXLOAD_IMP_T does not exist
SQL> drop type XDB.XMLIndexTab_t;
drop type XDB.XMLIndexTab_t
ERROR at line 1:
ORA-04043: object XMLINDEXTAB_T does not exist
SQL> drop type XDB.XMLIndexLoad_t force;
drop type XDB.XMLIndexLoad_t force
ERROR at line 1:
ORA-04043: object XMLINDEXLOAD_T does not exist
SQL> /* disassociate statistics type */
SQL> disassociate statistics from indextypes xdb.xdbhi_idxtyp;
disassociate statistics from indextypes xdb.xdbhi_idxtyp
ERROR at line 1:
ORA-29931: specified association does not exist
SQL> disassociate statistics from packages xdb.xdb_funcimpl;
disassociate statistics from packages xdb.xdb_funcimpl
ERROR at line 1:
ORA-29931: specified association does not exist
SQL>
SQL> /* drop statistics type */
SQL> drop type xdb.funcstats;
drop type xdb.funcstats
ERROR at line 1:
ORA-04043: object FUNCSTATS does not exist
create table NET$_ACL
ERROR at line 1:
ORA-00955: name is already used by an existing object
create table WALLET$_ACL
ERROR at line 1:
ORA-00955: name is already used by an existing object
Does anyone have any idea on what might be causing these errors to occur? After the script finishes, it appears that the XML component is installed correctly. I ran the following query to check:
select comp_id,version,status from dba_registry
     where comp_id in ('XML');
COMP_ID
VERSION
STATUS
XML
11.2.0.3.0
VALID
Should I be concerned about any of these errors?
Cheers,
Jeremy

I think those errors are ok as they are really warnings about stuff that does not exist. As long as the status is VALID in the end, the component
should be valid.
siva

While attempting to install Acrobat XI Pro (11.0.10) update, it stalls

Acrobat XI Pro (11.0.00) said there was an update.
So I clicked on it, downloaded it and have been attempting to install it.
It goes through all the steps installing the update, until it gets to the "Status: Copying new files" and just stalls with "Time remaining: 37 seconds".
I've also downloaded the update from the ftp site and tried with the same results.
Any help would be great!
Thanks

Hi IT Admin ,
Please have a look at the following links and see if this helps.
https://helpx.adobe.com/acrobat/kb/update-errors-acrobat-reader-windows.html
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Regards
Sukrit Dhingra

Problem while attempting to install After Effect CS6 Trial.

Attempting to install After Effect CS6 Trial.
Receiving this error after 2% of the installation is complete....
Exit Code: 34
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s), 0 warning(s)
FATAL: Payload '{A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.0.98.0' information not found in Media_db.
Do I need to re-download? Is there a funky setting on my system?
Looked in the forum and used the Adobe Support Advisor. It sent me to log files to look around and all I see is the same info.
Any help would be appreciated!
Thanks!

Unistall any ACR Betas on your system you may have used. Also simply run the Creative Suite Cleaner Tool and reinstall everything Adobe.
Mylenium

Fatal Error Message While attempting to Install :/

Hi,
I just purchased a new laptop and was hoping to wipe out Windows and install Arch. When I attempted to repartition my disk using the custom option - I got the following message:
Fatal Error: Bad primary partition 2: Partition ends in the final partial cylind.
I'm not sure what the second part of the message is trying to tell me.
If it helps this was the output from fdisk -l
Device Boot Start End Blocks Id System
/dev/sda/ 1 1036 8313856 27 unknown
/dev/sda2 * 1036 1048 102400 7 HPFS/NTFS
/dev/sda3 1048 30402 235780280 7 HPFS/NTFS
Any help would be greatly appreciated - what it means and what I might be able to do to fix it and move on
I have heard a lot of good things about Arch and I'm bound and determined to find a way to get Arch installed.

ppss,
I burned an image from another distribution and then used their installation program to create new partitions for Linux. I'm sure you could use gparted and other programs as well. I would goggle "Linux & partitioning" or Linux & partitioning tools" I'm sure you will find multiple ways to solve the issue. I'm not sure what the message was about but I was able to install a Linux distro (not Arch sadly, but that is due to another unrelated problem, I'm trying to work through) on my laptop without issues - so it wasn't a hardware issue.
fbr

Why did I get an "authors whom you trust" (Author Not Verified in dialog box) warning while attempting to install Lightbeam?

while downloading the Lightbeam plugin, firefox generated an "install add-ons only from authors you trust" dialog box. i'm assuming there's a good reason the browser issues this warning, when issued, and i'm not inclined to ignore it. i have a screenshot if necessary.
i'd like to know: should i ignore this warning?
thanks!!

hello mrclaude, this is the default dialog which will show up during each installation of any extension. there is of course a good reason to show this message, though addons can be very powerful and handy, they could potentially also do great harm. please note however that all extensions hosted at addons.mozilla.org get reviewed and approved before they become publicly available, so they can be generally considered as safe, especially the ones developed by mozilla itself of course.

An error occurred while attempting to install the BizTalk application: Failed extracting CAB files.

Ok I have a BizTalk Application that's called :
FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200
I know that is a long name but why should I be punisched when I create an installer for that. I also have a WebService that exposes this schema. And this webservice is stored inside the MSI cab files. So far so good.
But now when I try to install this MSI alongside all my other MSI's I get the following message :
Failed to extract file "C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd".
(Length=306)
The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters., (NULL), (NULL), (NULL).
If i could install in C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200 but the extraction would take place in d:\temp or whatever, I would not have a problem. But unfortunately it extracts in a subdir of an already
very long path......
Is there anybody who knows how to solve this... (can I tell the MSI to use D:\TEMP\ as an extract folder).
And using shorter names is not an option.
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

You can control the destination path of resources in your MSI by modifying them in the Resources folder of a BizTalk application.
%BTAD_InstallDir% defaults to C:\Program Files\Generated by BizTalk\... etc etc. You can put in whatever you like here.
You can get more granular control over the resources by using the
BTSTask.exe tool.
If you can tell me how to make the extract process of he cabs point to c:\temp i will be happy to use BTSTASK (wich i am already doing). But the problem is with the extraction oft he web service. It will extract to :
C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd
Wich is just to long. I want the cabs to extract to c:\temp or something like that.....
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Every time I try to install the usb driver for my iPhone 4s to my computer, it says "windows found driver software for your device but encountered an error while attempting to install". anyone know how to fix this???

I have tried countless things throughout the forum, but none of them worked. Anyone know a real solve for this?

thanks for your reply. i followed everything exactly. when I connected my iPhone after all that, it started "installing the driver" automatically. After a couple of minutes, it failed, just like before. Stuck again. thoughts?

While attempting to install firefox 6, I received a message saying that the computer needed to be restarted to complete an earlier uninstall of firefox. After rebooting I continued to receive the same message.

I had uninstalled Firefox to fix an earlier installation and received the message above.

C:\Users\<user>\AppData\Local\Mozilla\Firefox\Profiles\xuab2q88.default is the location of the cache folder for your default profile. If the updates folder isn't there then it looks that Firefox hasn't downloaded an update.
You can download the full version from http://www.mozilla.com/firefox/all.html
Delete the Firefox program folder: C:\Program Files\Mozilla Firefox
That will remove all Firefox program files in case some are locked or protected by security software.<br />
That should allow you to install a full version of Firefox 3.6.10
Your Firefox profile data is stored elsewhere and won't be affected.

Apple Mobile Device USB Driver: Windows found driver software for your device but encountered an error while attempting to install it.

Hello,
My iPhone 4 and iPad 3 are no longer detected by my computer, do not sync, and no drivers. I have tried every possible solution from Apple Support and about 5 others forums for the past 5 hours, including:
-Multiple uninstalls and reinstalls of driver and iTunes
-Stopping & running the service
-chaning ports and wires
PLEASE HELP!. screen shot attached.

thanks for your reply. i followed everything exactly. when I connected my iPhone after all that, it started "installing the driver" automatically. After a couple of minutes, it failed, just like before. Stuck again. thoughts?

Error while attempting to install i-tunes

I have been trying to install my sons Nano for an hour now. I got yhe nano software installed but I cannot get the Itunes to install I am getting this error: 1402. Could not open key: HKEYLOCALMACHINE\Software\classes\.cdda\Openwithprogids. Verify that you have sufficient access to that key, or contact your support personnel.
please help!!!!

hiya!
here's the best place to start with a 1402:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
love, b

"The product distribution file could not be verified" while attempting to install iPhoto

Hello,
I have accidentally deleted my iPhoto '11 application, because the iPhoto icon was showing up twice in the Applications (F4 key) and I wanted to clear the space up.
I have disks that came with my MacBook but they are somewhere that are inaccessible at the moment and I urgently need to reinstall iPhoto.
I have tried going to the App Store and installing iPhoto through Purchases, but "The product distribution file could not be verified" error shows up.
I have tried the method of using Console + deleting my 9n /var/folders and the Keychain Access OCSP and CRL methods to no avail. I even tried the Mac OS X Recovery.
Bottom line is, I don't know where the root of the problem lies and if I'm working on an atrociously wrong tangent. I am going to bring my MacBook to an Apple Store ASAP but am hoping to get some help here even sooner.
Thanks.

Hot dang, I found something that worked for me!
http://reviews.cnet.com/8301-13727_7-57530446-263/fix-corrupt-mac-app-store-down loads/
Basically you execute a command in the Terminal Utility, delete your Appstore cache and relaunch App Store which now allows me to download iPhoto '11!

Falied to register error message while attempting to install flash

I keep getting the same error message when I try to install flash. I've installed flash on this computer many times before. I've troubleshooted the problem to no avail. Does anyone have any ideas of how I might have a successful install. I am the administrator on my computer so I don't know what the problem is.
Thank you

Hi,
Can you please try the solutions listed in the following page: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html?
Hope that your issue is sorted fast with the above solution.
With regards,
Prabhu

Failure while attempting to install coldfusion 11 on win 2012.

Similar Messages

Maybe you are looking for