Fam starts on boot but fails to stop on shutdown
I have kdebase, kdelibs, kdeutils, kdenetwork, kdeartwork, kdepim and kdegames installed.
I'm new to arch.
I modified /etc/rc.conf to:
DAEMONS=(syslog-ng !hotplug !pcmcia netfs crond dbus hal portmap fam network alsa cups adsl clamav postfix kdm)
fam starts properly but fails to stop at shutdown or reboot. Why is that and how do I solve it?
I'm afraid to say the problem is back even if the timeout value is set to 0, after I rebooted twice today the problem happens again. Any idea why?
Similar Messages
-
Is it possible to lose a portion of an application,my i photo starts to boot but never completesn
is it possible to lose a portion of an application,my i photo starts to boot but never completely opens??
Check the logs.
-
[SOLVED - partly] Minidlna won't start on boot, but OK otherwise
I am using an up-to-date system as of 2012-11-13. The problem is that minidlna fails to start on boot:
minidlna.service - minidlna server
Loaded: loaded (/usr/lib/systemd/system/minidlna.service; enabled)
Active: failed (Result: exit-code) since Tue, 2012-11-13 07:53:55 CET; 1h 33min ago
Process: 401 ExecStart=/usr/sbin/minidlna -P /var/run/minidlna/minidlna.pid (code=exited, status=255)
CGroup: name=systemd:/system/minidlna.service
Nov 13 07:53:59 earth minidlna[401]: [2012/11/13 07:53:54] minidlna.c:754: fatal: No IP address automatically detected!
So I guess it has to do something with the network, I am using DHCP, with systemd + net-auto-wired.service.
I have found this: https://ask.fedoraproject.org/question/ … r-dhcp-has
They have solved the problem by changing the after part in the unit by adding: dbus-org.freedesktop.NetworkManager.target
Since I do not use networkmanager, this is not an option for me. The current, unmanipulated state of the minidlna unit is:
[Unit]
Description=minidlna server
After=network.target
[Service]
Type=forking
User=nobody
ExecStart=/usr/sbin/minidlna -P /var/run/minidlna/minidlna.pid
PIDFile=/var/run/minidlna/minidlna.pid
[Install]
WantedBy=multi-user.target
What I have noticed is that it refers to a network.target in the after section, but it seems to me that I don't have one.
I only have:
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
12 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Edit: having run the command again with the --all prefix:
Notice: network.target loaded inactive dead Network
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded inactive dead Network
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs.target loaded active active Remote File Systems
rescue.target loaded inactive dead Rescue Mode
shutdown.target loaded inactive dead Shutdown
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded inactive dead Syslog
umount.target loaded inactive dead Unmount All Filesystems
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
21 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.
My question is what should I add to the after part to make minidlna work upon booting? Wouldn't a graphical.target be an overkill?
Thanks in advance.
Last edited by szebenyib (2012-12-02 16:45:26)szebenyib wrote:(However I cannot access the internet that way, maybe because of a bad network file. Honestly I have some space to improve my network knowledge.)
In the case of the possible bad network file. here is what it expects. First, you need to know the router's IP address. In the following I will assume 192.168.0.1 for the router's IP address.
192.168.0.1 is common for D-Link routers, but it does vary by router manufacturer and model. I believe 192.168.1.1 is common for Linksys.
/etc/conf.d/network
interface=eth0 # ethernet port to activate, usually eth0
address=192.168.0.110 # IP address you want the minidlna computer to have. the first 3 triads must be the same as the router's IP addr in this case 192.168.0 the fourth triad can be from 5 to 250
netmask=24
broadcast=192.168.0.255 # the first 3 triads must be the same as the router's IP address and the fourth triad should be 255
gateway=192.168.0.1 # the IP address of your router
In a terminal window, enter:
systemctl restart network.service
ping -c5 127.0.0.1
which is localhost. The -c5 means ping 5 times then quit. If you get: 5 packets transmitted, 5 received, 0% packet loss then the ping was successful, which means
that the ethernet port (usually eth0) is active. If this ping is not successful, go back and check the syntax and spelling in both /etc/conf.d/network and /etc/systemd/system/network.service
If the ping is successful:
ping -c5 192.168.0.1
and ping the router.
If you cannot ping the router's IP address, then there is still something wrong in one of the two involved files. or the router's settings need to be changed.
If you can ping the router's IP address successfully and still cannot get to the internet, you probably have DNS server issues.
ping -c5 google.com
ping -c5 8.8.8.8
If you cannot ping google.com but can ping 8.8.8.8 then you have DNS problems, see Arch WIKI resolv.conf
My network is a mixture of DHCP and STATIC IP addresses. In my router, I have the DHCP server enabled to give IP addresses between 192.168.0.10 and 192.168.0.60
this gives the router 50 DHCP addresses to work with which is more that enough for my home network. The rest of the addresses between 192.168.0.61 and 192.168.0.250
can be used as static addresses. Just an example, this can be changed as necessary.
HTH
Pudge -
I downloaded an audiobook and it started working but then it stopped. Is there anyway I can redownload my audiobook so that it starts working completely?
This is a ridiculous policy and it interferes with how most people would listen to an audio book since they are quite lengthy. I'm traveling, so I throw the audio book on using my iPad and I get 60% of the way through the book on my trip. I come home, I want to listen to the rest of it via iTunes on my stereo through AirPlay. And this can't be done?
This is the last audiobook I buy from iTunes until they *fix* this... and it IS something that requires fixing whether that means negotiating more aggressively with the audiobook providers or changing something at the software layer. It completely ruins many peoples' experience!
It's funny because a friend of mine suggested buying it, then downloading it from a torrent just so I could use the book the way I wanted to use the book. Is it not sad that to create a positive overall user experience you have to resort to downloading something off a torrent?
iTunes is supposed to make things easy and accessible. I agree with jamusick's posting -- this isn't the vision Steven Jobs had for the future. This is a road block on the way there. -
[SOLVED] apache daemon fails to start on boot, but rc.d restart works?
I installed apache from the official repos and followed the instructions in the wiki for configuring it. I checked to make sure the http user exists, and I /etc/hosts looks good (to me). Upon boot, the daemon fails to start and I can't load local web pages, but running "rc.d restart httpd" works just fine. Since I'd rather not start it manually every time I boot, is there a way to fix this? Also, httpd is the last daemon in my DAEMONS array.
/etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 127.0.0.1:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#php
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#PHP
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
/etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost laptop
::1 localhost.localdomain localhost
# End of file
Per the wiki, I also tried commenting out the line that reads
LoadModule unique_id_module modules/mod_unique_id.so
Either way, it still fails on boot.
Last edited by pythonscript (2012-06-10 21:14:44)The SIGTERM are from reboots, yes. I'm not absolutely sure that the process isn't running; I just know that I can't access http://localhost immediately upon reboot. I have to restart the httpd daemon, which works fine. How would I be able to tell if it's just hung?
I checked everything.log, and I don't see anything that leaps off the page to me.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1930 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 2 threads of 1 processes of 1 users.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1931 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 3 threads of 1 processes of 1 users.
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: RegisterClient 106d33cade29b1ba713392593689729000000018320001
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689729000000018320001 to session
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): uid = 120
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): pid = 1842
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): App gnome-settings-daemon.desktop registered
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase INITIALIZATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=106d33cade29b1ba713392593689681600000018320000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: started pid:1936
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase RUNNING
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmPresence: adding idle watch
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost kernel: [ 29.003352] wlan0: no IPv6 routers present
Jun 9 17:29:31 localhost NetworkManager[765]: <warn> could not commit DNS changes: (0) Could not replace /etc/resolv.conf: Operation not permitted
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) successful, device activated.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Setting up new connection
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: New client '0x7f9ff0004e60 []'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Initializing client 0x7f9ff0004e60 []
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 []' received RegisterClient(106d33cade29b1ba713392593689681600000018320000)
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689681600000018320000 to session
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Set properties from client '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: ProcessID = '1936'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: sending IPv6 Router Solicitation
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: no IPv6 Routers available
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: sending IPv6 Router Solicitation
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: no IPv6 Routers available
Jun 9 17:29:33 localhost NetworkManager[765]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:40 localhost NetworkManager[765]: <info> (eth0): IP6 addrconf timed out or failed.
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> (wlan0): IP6 addrconf timed out or failed.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: handling signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Got callback for signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Logout called
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: requesting logout
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase RUNNING
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Caught signal 15, shutting down normally.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Done handling signals
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, 9, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: query end session complete
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, c, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: unable to find application for client - not restarting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428a40
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Using ConsoleKit for session tracking
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]')
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received CloseConnection
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x7f9ff0004e60
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000])
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428ac0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: last client disconnected - exiting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Unreffing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disposing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473070
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473150
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gdm-simple-slave[1728]: WARNING: Child process 1832 was already dead.
Jun 9 17:29:43 localhost gnome-session[1970]: EggSMClient-WARNING: Desktop file '/home/ak5791/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2022 of process 2022 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 4 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2023 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 5 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2024 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 6 threads of 2 processes of 2 users.
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Jun 9 17:29:44 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.colord-sane' (using servicehelper)
Jun 9 17:29:45 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Successfully made thread 2079 of process 2079 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Supervising 7 threads of 3 processes of 2 users.
Jun 9 17:29:46 localhost pulseaudio[2079]: [pulseaudio] pid.c: Daemon already running.
Jun 9 17:29:48 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jun 9 17:29:48 localhost udisksd[2110]: udisks daemon version 1.94.0 starting
Jun 9 17:29:48 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 9 17:29:48 localhost udisksd[2110]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 9 17:29:48 localhost kernel: [ 46.319778] gnome-shell-cal[2103] trap int3 ip:7ff3f55b85e1 sp:7fff94941890 error:0
Jun 9 17:30:19 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:40:53 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:47:15 localhost kernel: [ 1092.983585] usb 8-1.4.1: new high-speed USB device number 8 using ehci_hcd
Jun 9 22:47:15 localhost mtp-probe: checking bus 8, device 8: "/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4.1"
Jun 9 22:47:15 localhost mtp-probe: bus: 8, device: 8 was not an MTP device
Jun 9 22:47:15 localhost kernel: [ 1093.132002] usbcore: registered new interface driver uas
Jun 9 22:47:15 localhost kernel: [ 1093.135601] Initializing USB Mass Storage driver...
Jun 9 22:47:15 localhost kernel: [ 1093.135785] scsi6 : usb-storage 8-1.4.1:1.0
Jun 9 22:47:15 localhost kernel: [ 1093.135905] usbcore: registered new interface driver usb-storage
Jun 9 22:47:15 localhost kernel: [ 1093.135913] USB Mass Storage support registered.
Jun 9 22:47:16 localhost kernel: [ 1094.137579] scsi 6:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 2
Jun 9 22:47:16 localhost kernel: [ 1094.140133] sd 6:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB)
Jun 9 22:47:16 localhost kernel: [ 1094.140631] sd 6:0:0:0: [sdb] Write Protect is off
Jun 9 22:47:16 localhost kernel: [ 1094.140634] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Jun 9 22:47:16 localhost kernel: [ 1094.141128] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.141132] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.144916] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.144921] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.146680] sdb: sdb1
Jun 9 22:47:16 localhost kernel: [ 1094.151407] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.151411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.151414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Jun 9 22:47:17 localhost ntfs-3g[2636]: Version 2012.1.15 external FUSE 29
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mounted /dev/sdb1 (Read-Write, label "kingstonGB", NTFS 3.1)
Jun 9 22:47:17 localhost ntfs-3g[2636]: Cmdline options: rw,nodev,nosuid,uid=1000,gid=100,dmask=0077,fmask=0177,uhelper=udisks2
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mount options: rw,nodev,nosuid,uhelper=udisks2,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
Jun 9 22:47:17 localhost ntfs-3g[2636]: Global ownership and permissions enforced, configuration type 7
Jun 9 22:47:17 localhost udisksd[2110]: Mounted /dev/sdb1 at /run/media/ak5791/kingstonGB on behalf of uid 1000
Jun 9 22:47:28 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jun 9 22:47:28 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jun 9 22:47:46 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:57:59 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 23:01:02 localhost /USR/SBIN/CROND[5529]: (root) CMD (run-parts /etc/cron.hourly)
Jun 9 23:21:02 localhost -- MARK --
All I notice is that my system's time is having a few problems, since you'll notice that events occur at 22:00 and change, then 17:00 and change, then back to 22:00 and change afterwards. Could this be the problem? I've had the CMOS batteries peg out on me suddenly in the last few weeks. I would hope this sytem is not also suffering a similar fate. Nothing else was happening on my system except for the standard processes from /etc/rc.conf and other standard ones, since I've just been rebooting, checking the logs, then posting here. -
When I "share: to DVD the file is transcoded. When the sharing process gets to 66%, it changes to "finishing" "CreateDVD:waiting fro create disk to finish. The sharing process does no go beyond 66%, and when I stop the sharing process, I receive the message "the share DVD operation has failed."
Is this a problem with FCPX or Create DVD? How can this problem be resolved?The handshake between FCP and a hidden app called Create Disk wasn't completed.
Try this. Select a short range and Share>DVD. In Output Settings. set it to Hard Drive to save as a disk image. (Save to your Desktop so you can find it.) For menu Background, click the Add button, then cancel. That is often enough to wake up the disk burning part of this process. If it makes a disk image, try a physical disk.
Russ -
LaunchDaemon does not start at boot, but manually
Hi all
I have a LaunchDaemon entry for apache that does not start at system boot.
It contains the following keys that might affect the behaviour.
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
I can manually load the script using
sudo launchctl load /LibraryLaunchDaemomns/org.macports.svn.plist
Maybe I did not fully understand the LaunchDaemon concept. My program is
a wrapper that will start svnserve as a standalone server.
As I mentioned earlier it works fine manually, both "load" and "unload" successfully start and stop the service.
I'd appreciate any comments
Thanks a lotGood evening
I want to startup my SVN service on a local RAID volume, but need to wait
until it is mounted. To do so I added the following to my daemons plist:
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<string>/Volumes/RAID</string>
</dict>
Maybe this is useful to someone in this forum.
Cheers -
I recently upgraded my MacMini Itel Duo HD to a SSD and it has worked fine for a month or so. Now I can't get it to boot without it powers down within seconds. Is there a keyboard solution?
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I do not know which version I am using - I am truly computer illiterate. You will need to tell me what information you need, and how to find it. Sorry.
At about the same time as this developed, I lost the ability to continually see the tool bars at the top and bottom of the screen- as if the page was too big for my screen. Don't know if they are connected problems.virginiafromphoenix wrote:
.......How do you close a non-responsive application?.......
Try ( alt + cmd + esc ). Gives you a menu of running applications, and a chance to "Force Quit". -
Trying to create a service that starts at boot
People,
I'm trying to create a service that will start at boot (in single-user mode, actually). I am up and running but I do NOT want to run the service now. I only want to run the service when the machine reboots.
I've been rummaging around all day trying to figure this out but I'm stuck. I can create a service that runs. I can create an XML file in /var/svc/manifest/site/patch-install.xml that will be read when I boot- because after I boot, I can list the service:
svcs -a | grep patch
disabled 18:23:23 svc:/site/patch-install:defaultI have inserted the following in my xml:
<create_default_instance enabled='true' />and also
<create_default_instance enabled='false' />but it makes no difference. Anyone have any idea? What is the purpose of create_default_instance? I don't understand; item 9 on http://www.sun.com/bigadmin/content/selfheal/sdev_intro.html seems rather opaque to me.
Also, what exactly is the purpose of /var/svc/profile/ ? I tried putting some code to enable my xml but it didn't do anything. Just wondering if this might fit into the picture.
BTW, I do not want the login prompt to appear until my method is complete.
Thanks.
-mschwage
Here fyi is my /var/svc/manifest/site/patch-install.xml file:
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<service_bundle type='manifest' name='Patches:patch-install'>
<service
name='site/patch-install'
type='service'
version='1'>
<create_default_instance enabled='false' />
<single_instance />
<dependent
name='patch-install_single-user'
grouping='require_all'
restart_on='none'>
<service_fmri value='svc:/milestone/single-user' />
</dependent>
<exec_method
type='method'
name='start'
exec='/var/tmp/S92delay'
timeout_seconds='86400' />
<exec_method
type='method'
name='stop'
exec=':true'
timeout_seconds='0' />
<property_group name='startd' type='framework'>
<propval name='duration' type='astring' value='transient' />
</property_group>
<stability value='External' />
<template>
<common_name>
<loctext xml:lang='C'>
Install patchset upon boot.
</loctext>
</common_name>
</template>
</service>
</service_bundle>Hushpuppy wrote:
People,
I'm trying to create a service that will start at boot (in single-user mode, actually). I am up and running but I do NOT want to run the service now. I only want to run the service when the machine reboots.I'd probably create the service now (by importing the manifest manually rather than waiting for the reboot), then set general/enabled in the default instance to be be true with svcprop. That should tell it to start at boot, but not enable it immediately.
I've been rummaging around all day trying to figure this out but I'm stuck. I can create a service that runs. I can create an XML file in /var/svc/manifest/site/patch-install.xml that will be read when I boot- because after I boot, I can list the service:Yes, that's the default. Or you can load it immediately to create the service now.
# svccfg import patch-install.xml
I have inserted the following in my xml:
<create_default_instance enabled='true' />and also
<create_default_instance enabled='false' />but it makes no difference. Anyone have any idea? What is the purpose of create_default_instance? I don't understand; item 9 on http://www.sun.com/bigadmin/content/selfheal/sdev_intro.html seems rather opaque to me.There's a difference between a "service" like network/smtp or console-login and an "instance" like network/smtp:sendmail or console-login:default. In most cases, you just want a single "default" instance of your service. The above line sets the default instance 'enabled' property to true or false. When I import your manifest as is, the service comes in as 'disabled'. If I set it to true, it comes in as 'maintenance' (almost certainly because it was enabled, tried to start, and couldn't find the start method on my machine).
Also, what exactly is the purpose of /var/svc/profile/ ? I tried putting some code to enable my xml but it didn't do anything. Just wondering if this might fit into the picture.'profiles' are loaded exactly once, and they are mainly used to set certain services to enabled or disabled.
3 of them are loaded if present, platform.xml, generic.xml, and site.xml. The last is not generated by the OS, but left for you to use. But it's usually only useful as a "first boot" type thing. Because if you make changes to it, it will not be reread. This isn't usually a problem because after first boot you're in control of the services. The usual thing is that at first boot the manifests load to create services, then the profiles are loaded to set then enabled or disabled. This isn't possible before that point because there's no service to modify yet.
BTW, I do not want the login prompt to appear until my method is complete.Any login prompt like a network login, or only the console login prompt? If the latter, then you'll want a dependency so that system-console-login depends on your service. But if your service has a problem at boot time, you'd make it difficult to log in.
Darren -
(MacBook 2014 model) most of keybord stopped working can't login. Restarted, screen started flashing bootup was slow and but no success. Tried safe boot but still no effect. Any suggestions please!! Urgentw
Try SMC and NVRAM resets:
https://support.apple.com/en-us/HT201295
https://support.apple.com/en-us/HT204063
Then try the safe boot again:
https://support.apple.com/en-us/HT201262
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao. -
Hp pavilion notebook n5190 fails to boot-up and fan stops spining but power light remains on,why?
HP Pavilion Notebook N5190 fails to boot-up and fan stops spining after five seconds but power LED light remains on,Why?
Hey Sunny,
I would recommend following this document: http://goo.gl/PNlnm It should help you resolve the issue. Let me know how it works and if it resolve the issue.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
I was having a problem down loading photos, so I force quite all programs. Then there was problem launching finder. Relaunched and turned computer off to reboot. Now computer starts, but does not boot up I am stopped at a white blank screen
Welcome to Apple Discussions Dathanb
You have posted in the Feedback About New Discussions forum.
As you are a first time poster, you seem to have missed the text at the top of this forum that says:
Please Read This Before Posting Here
If your question concerns a hardware or software technical issue, please do not post in this forum
Go to the main Apple Discussions page, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the POST NEW TOPIC link. Because your post doesn't indicate was OS you are using on your iMac, I can't give you a link to the most appropriate forum.
Basically, though, the version of TechTool on the AppleCare disks is not compatible with newer versions of OS X and/or Macs (I can't remember which). If you don't get a satisfactory response by posting in the appropriate iMac or OS X forum, I suggest you take your iMac to the geniuses at the Apple Store. You can set up an appointment time for the same day online before you leave home.
Peggy -
Getting p2pp burn boot check failed.Windows 7 not getting started Recovery restpration completion
PLEASE HELP
Hi,I am trying to do factory recovery of my HP DV6 laptop using original HP recovery disc.My laptop has Windows 7 (64Bit) OS. I am doing below steps
By pressing F10,entering BIOS mode, changed the BOOT ORDER to take from CD ROM and saved the setting with F10 option and then forced shutdown the laptop and inserted the 1st recovery disc
Restarted the laptop and it started to boot and it asked for all 3 recovery disc + Supplement driver disc. All were successfully copied and installed. Laptop was restared multple times as it was being displayed on screen. I could see there were Softwares being installed, Service setting,registry setting being applied to computer and after around 1 to 1.5 hours laptop gets shut down, so i beleive all installations have been [performed.
Now when i start my laptop, it says
Windows was not shut down properly choose an option and when i seelct either of the 4 options like Satrt normally or Start with command prompt or Start with Networking...everytime it takes me to screen giving belwow message:
SAVE LOGS DETAILS RETRY
In Details logs, i see below as the message
P2PP BURNBOOT Check failed
Possible causes:
1. Yellow-Bang occured at device manager
2. Some silent-install failure of applications
3. Found failed at PININST_BBV
4. Found failed at PININST_BBV2
5. Found memory Dump file
Suggestion:
1. Checking REGDEV_BB.log for drivers
2. Checking BBApps.log for applications
3. Checking MEMDUMP_BBV.log for memory dump file
1. After reading forums queries, I tried to set BIOS default by pressing F9 andf then pressing F10 ,saving and exit and then tried to reinstall everything but i get the same error.
2.I tried changing the system date from March 18th 2015 to March 18th 2012 and then do recovery , but still getting same error
3. I pressed F2 and did all Memory and Hard disk test and it all passed.
So Can anyone please help me whats the issue. ThanksHi there @VKD1
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your notebook is not starting after a system recovery, with a "Windows was not shutdown properly" error message.
See if you can run the startup repair:
How to Run a Startup Repair in Windows 7 - sevenforums.com
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!
Maybe you are looking for
-
My computer crashed and I lost my iTunes library and music. The music is however on my iPod 5th Generation. How do I move my music to my husbands computer, where he has his own music....or how do I transfer or add my music from my iPod to my iPad? I
-
Question: Inadvertently a visiting toddler gained access to my computer during a visit. He's obviously fiddled with something as I can no longer use my arrow keys to navigate through my albums or events on iPhoto. Only one pic shows up in the album v
-
Problems with Wifi on iphone 4 after updating ot iOS 5.1
After I update to iOS 5.1 is started having problems with my home wifi. After the update every thing seems to be running alright after after a day my connection was lost. When I tried to reconnect I got the message "unable to join the network". I tri
-
Windows Store in the Enterprise
I'm trying to figure out how to deploy Modern UI apps to our Windows 8.x devices while leaving the Windows Store disabled. I'm familiar with sideloading, but that only applies to LOB apps, since you explicitly cannot sideload apps that exist in the
-
At what percentage should I to charge my macbook pro and prolong the life of my battery?
I want to prolong the life of my laptop battery. I just got a new macbook pro and want to know the proper way to charge the battery.