LaunchDaemon does not start at boot, but manually

Hi all
I have a LaunchDaemon entry for apache that does not start at system boot.
It contains the following keys that might affect the behaviour.
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
I can manually load the script using
sudo launchctl load /LibraryLaunchDaemomns/org.macports.svn.plist
Maybe I did not fully understand the LaunchDaemon concept. My program is
a wrapper that will start svnserve as a standalone server.
As I mentioned earlier it works fine manually, both "load" and "unload" successfully start and stop the service.
I'd appreciate any comments
Thanks a lot

Good evening
I want to startup my SVN service on a local RAID volume, but need to wait
until it is mounted. To do so I added the following to my daemons plist:
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<string>/Volumes/RAID</string>
</dict>
Maybe this is useful to someone in this forum.
Cheers

Similar Messages

Windows does not start at boot

Hello,
Windows does not start at boot, how? 'Safe Mode either )

If your system is not properly booting then you must press F8 when start the system then there are two option
Repair Window,start window normally if not properly work then you will install again operating system.

Ssh does not start at boot

Hi All
As my title explains, ssh does not start when I reboot.
I can start it like: ./usr/lib/ssh/sshd
So my question is: how can I change this behaviour and let ssh start at boot ?
Thanks a lot in advance
Luca

thnx a lot!!!!
Luca

Ipad does not start. logo appears but goes off after some time.

I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.

I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.

[SOLVED]dhcpcd does not start on boot anymore

Hello,
I reinstalled Arch last night to try and be as to the letter as possible because I had three bad installs( or so I thought https://bbs.archlinux.org/viewtopic.php?id=195192 ) and it was going well. I tweaked some SSD Optimization configs and went to bed.
Today I wanted to install OpenBox so first I tried to update my system with pacman -Syu (without reading the change log or anything of course) and I couldn't download anything. A quick ping to google.com gave an unknown host error. Nothing has changed over night and I rebooted the machine last night a couple of times and I always had internet connection. The guide said that dhcpcd runs automatically on boot and I looked through the change logs at the places I understood and couldn't find anything about this being disabled on boot now. I do see that it was updated in the last 24 hours but again, nothing about auto run on boot being disabled.
Little things like this bug me, I can enable the service using systemctl and call it a day but I was wondering if I was the only one experiencing this. If I'm the only one then it probably isn't a good thing.
SOLVED: Did not read the Beginner's Guide within context of the installation medium.
Last edited by SirMyztiq (2015-03-29 01:20:49)

nullified wrote:
SirMyztiq wrote:I updated the packages and just went to bed.
What packages were upgraded? If I am understanding you correctly, dhcpcd was enabled and working fine before the upgrade, but after the upgrade dhcpcd appears to be disabled. Is that correct? Two bits of informaiton you should post here are the complete list of updated packages and the output of
systemctl status dhcpcd
SirMyztiq wrote:Nothing has changed over night and I rebooted the machine last night a couple of times and I always had internet connection.
You previously say you upgraded then went to bed, so that would be the change. I'm a little confused by these seemingly contradictory assertions.
I apologize for the confusion.
I'll give you the current list of packages as soon as I install a browser on my machine(I'm on my laptop) but I can tell you that all I had last night was the "base" and "base-devel" packages installed. I mainly did tweaking like setting the scheduler dynamically on my ssd to "deadline" following the SSD Optimization wiki and read a bit about OpenBox to make sure I get it right. I also rebooted the computer a couple of times to check for that "time out" bug I mentioned. It all checked out, so I went to bed.
I power her up today, try to do a system update and I wasn't able to. A ping to google.com gave me an "unknown host" error. I checked both the "status" and whether it was "enabled" with their respective systemctl commands and both gave me the feedback that it was not active nor was it enabled.
I'll edit the original post to be more clear and look like I have some grasp of English.

My iBook G4 does not start or boot. The screen does not light and the start up chime does not sound. What should I do? Please help.

But I think it still works since I hear noises inside the machine and the caps lock still lights up. It just won't start.

Hi, Toby. Welcome to Apple Support Communities.
Have you tried resetting the PMU?
http://support.apple.com/kb/HT1431?viewlocale=en_US
This is the first troubleshooting measure an Apple Authorized Service Provider would try.

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

Service reads data but Bpel process does not start

i have a very simple project. I have db2(as400) adapter and it reads data, i will receive data, transfom and send to oracle database. I deployed the project successfuly but when instance start i see the service reads the data but bpel process does not start and and there is no error. At the flow chart there is only readAS400 partnerlink, there is no bpelprocess. In the partnerlink i am usin polling, i read the data's with 1 and update to 2. It reads but dont update to 2.
In deploy step and when instance starts there is no errors. But when i am deploying i get a warning but i dont know it's related with this situation.
(Warning: property "activationAgent.readAs400.className" may not be understood by BPEL component BPELProcessEqpType - it will likely be ignored.)
Do you have any suggestion ? Thanks in advance.

check the recovery console, the bpel process possibly is going into manual recovery,
Another thing you might wanna try is using checkpoints in your process..
also, instead of getting the db adapter to instantiate the process, try a simpler process just to see if the db adapter is working or not..
A normal process, which you manually instantiate from em console, with the db adapter in it after the recevie activity
Edited by: AshishSharma on Jun 24, 2010 5:48 PM

When I switch on, the Apple and progress icons appear but it does not start.

When I switch on, the Apple and progress icons appear but it does not start. I tried resetting PRAM, Utilities, everything. It says the system is OK. I even reinstalled Tiger, but nothing has changed.

Given that you were able to reinstall the OS, you must be able to boot from the install disc.
Have you run Apple Hardware Test?
Tried running on just one RAM module, then switch it to other slot, then repeat with other module?
Safe Boot?
Checked SMART status?
Run Repair Disk:Boot from install disc (insert disc > restart > immediately hold down ckey and keep holding it until you see “Preparing Installation”) > at firstscreen select the language and click Continue > click on the Utilities Menuin the menu bar > open Disk Utility > select your HD in the panel on theleft side> click Repair Disk at bottom of main window. Run this at leasttwice, and keep running it until it says “appears ok” twice in a row. If thatdoesn’t happen, you may need a stronger utility such as DiskWarrior or if thedirectory is damaged beyond repair, you may need to reinstall the OS, or youmay have a damaged HD (repair utilities can only repair the directorystructure, not the HD itself). When this is finished, quit Disk Utility, quitthe installer, and restart. Once booted normally, go to Applications >Utilities > Disk Utility and run Repair Permissions.

ITunes does not start automatically when I plug in my iPHONE. When I start it manually it does not recognize my phone although the phone is visible in My Computer.

Itunes does not start automatically when I plug in my iPhone. When I start it manually, it never recognizes the phone although it does ask if I want to download pictures etc. Many albums have no art work that use to. iTunes completely unresponsive to the mouse.

Hi billm1013,
I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

There is no problem in Outlook but Lync does not start. → "Microsoft Lync cannot be started"

hi,
There is no problem in Outlook but Lync does not start.
→
“Microsoft Lync cannot be started”
Addtional Info:Office2007（natural
but 32bit）is in use.
External devices except phone are not connected.
Not able to understand the issue. vene tried unistalled and re-install same issue.
Is there any add-in kind of issue?

What happens if you have no outlook.exe and any office software such as word excel or powerpoint running and then you try to launch Lync Does it still fails Can you give more detail about the error in that scenario?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer". Regards Edwin Anthony Joseph

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Xfce4-power-manager does not start, but after relogin - works

Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.

Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32)

HT201412 my phone restore but does not starts it shows only apple logo please help me

HI
My i phone restore but does not start it shows only apple logo & charging it was not connect to i tune please help me

See your other post on this Topic...
https://discussions.apple.com/message/22315227#22315227

T400 does not start up with a battery and AC, but starts up with only AC.

I bought T400, 7417-CTO in Jan 2010. My T400 does not start up with a battery and AC power. I tried to start with only AC power after pulling out the battery, it worked fine. Even when I inserted the battery in T400, which was running perfectly with AC only, T400 seems to lose the power - more strictly speaking, it kept stoping and re-running several times, and finally it dead.
a few possibilities
1) a battery is dead - but it does not explain the failure with both AC and battery
2) some hibernation issue - I plugged in and out the DIMM, and clock battery. I tried to keep pushing the power button trick, but it didn't work
3) Mother board failure??
I really appreciate if you give me some advice on it.
Wanyong

Thanks for all your kind and helpful comments.
Unfortunately, I don't have any friends who have Lenovo - or I don't have many friends here since I moved in the last summer. ;-)
After purchasing a new battery, I will update it. Hope that this thread helps someone who had/will have same prob. as mine.
-WS

LaunchDaemon does not start at boot, but manually

Similar Messages

Maybe you are looking for