Family Base Notification to Account User

When using family base, why does Verizon notify the account user that one of their contacts has been put on the watchlist or blocked from sending messages or calling?  Is there anyway to prevent this notification from happening?

Dear Jojo,
Can you please provide the details and procedure to create custom notifications. I need to create for oracle self service HR. i need to send the notifications of certain actions like termination, absence etc for particular persons
Thnak you,.

Similar Messages

  • Family Base set up

    I ordered family base when buying my daughter a phone. The dashboard shows my daughter's line as the parent and doesn't let me change it. I don't think I can even get started using the service until I can tell it I am the parent, and she is the child. Can anyone tell me how to fix it?

    I think I found a solution, at least it worked for me....
    Remove Family Base from your account, then re-add it after you have selected your own phone as the one to add services to.  I can only figure that since I added this service while purchasing a new phone, some bug in the software made the new phone the "account owner," even though it was not an account owner in any other regard.
    Hope this helps....

  • Question about family base and 911 notification of both parents

    recently,we,had,someone,call,911,on,one,of,our,phones.,,I,am,a,parent,and,was,not,notified,,but,my,wife,who,i,think,is,shown,as,account,owner,on,our,bill,was,notified,on,her,phone.,,We,want,to,be,sure,we,are,both,notified,immediately,on,our,phones.,,How,to,I,change,family,base,to,make,both,parents,get,the,notifications,for,a,911,call,by,someone,in,the,family,base?,I,look,everywhere,I,could,find,but,have,not,figured,it,out.,thanks

    There used to be more flexibility for notifications.  I called Verizon and they confirmed we lost some functionality.  I used to have notifications sent to my wife, but now they only go to the primary account holder.  This was changed in the past week.  I used to get the phone number in data usage alerts (phone number ##### reached it's limit), but now it doesn't tell me who reached the limit.  You have to login to the website to find out.  Even more frustrating was the notification that said one of my lines dialed 911.  It didn't tell me who, and I just pictured one of my family members in a terrible accident and the notification wouldn't tell me who it was.  When I called Verizon and said I needed to know, they wanted to teach me how to find it on the website instead if helping me in my emergency.  The bottom line is everyone needs to call Verizon to get this functionality back.  I agree you have at least the option of notifying any/all account owners.

  • Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.Can someone answer it?

    Unable to Sync emails to car's HU over bluetooth. I am using iphone 5 and have set up a gmail account on it. Also, the basis notification settings mentioned on some site have been done.I tried doing the following still the email sync is not working.?
    Here's the step by step:
    1. Go to Settings --> Notifications --> Mail --> Select any of your email accounts
    2. Notification Center: ON
    3. Alert Style: Banners or Alerts (I've only tested it to work with Banners...)
    4. Show Preview: ON
    5. View in Lock Screen: ON

    Hi uneleashurself and thanks for your answer.
    Forgive my language but getting to talk to the Safaricom customer service is a real pain in the **bleep** - if you ever get to talk to them, that is.
    I've never got an answer to my phone calls in three years and their customer assistans in the shops usually have no clue about whatever it is you're asking them.
    I talked to a few of them in a couple of different Safaricom shops and they didn't know what I was talking about.
    Still, I believe Safaricom is not the problem as other people I know who have a BlackBerry on Safaricom haven't experienced this problem.

  • How can a family with multiple existing accounts use Home Sharing?

    I'd like to use the new Home Sharing feature, but it appears to be restricted to families in which all of the family members share a single user account.
    We already have separate accounts for each family member. Is there some way for us to use Home Sharing without abandoning most of our existing accounts, along with all of the purchases made by those accounts? I don't think anyone in this situation would be willing to do that.

    Eh. I am not too sure since I have not messed with it much but I do have a great deal of experience with multiple accounts. Each computer can be authorized for multiple accounts. As can iPods. iPods can sync songs/videos/apps from multiple accounts as long as the computer is authorized with them. What I have set up here, is I buy my stuff I want, my parents buy what they want and so do my brothers. When my bro gets something I want I just move it to my computer. That way all our accounts are separate, but if there is something I want I can get it. Also, since the music no longer has DRM, it won't matter. It will play on any computer. What you should see is if you can just do the shared library with multiple accounts. Then if you don't have videos or such, you can get apps or music. Hope this helps!

  • IOS 8 Family Sharing Notification Issues

    I receive "request to buy" notifications, from my daughter, on my iPad, but not on my iPhone.  If I approve, she receives the notification, but if I decline, she does not receive the denied notification.
    Anyone else having these kind of issues?
    Until iOS 8, my entire family shared an iTunes account for purchases.  I have set up Family Sharing, as the Organizer, and under my iCloud account, but it is not the shared iTunes account. I did pick the shared iTunes account under the Family Purchases section of the Family Sharing setup.  I then invited my daughter and set her iPad up to do the family sharing. She is required to ask to make purchases and it seems to work.
    Like I said at the beginning of this post, I receive a request notification on my iPad, but not my iPhone.  I checked the settings between my iPad and my iPhone and they match exactly.  I don't want to tinker around so much because I have the other posts about Family Sharing limitations and lockouts.
    I'm afraid to "convert" my son and wife to the new family sharing plan until I know for sure the rest of this system is going to work as advertised.

    Already written this entry in another post, but since many people, including me, I post it here, too, but unfortunately no solution:
    Same here. What's really strange it the following. I just recently set up family sharing, and have only received 3 requests. First time the notification of the request only turned up on my computer at work, next time only on my phone. The third time only on  my computer at home. Whenever I try to approve on any of  the computers I get stuck in a sort of loop where I enter my Apple ID. What I do is, the following. I find the notification, and click on it, get to the "info screen" where I get some info on the app and the two buttons deny and approve in the upper right corner.. I decide to approve and is prompted to enter my password, which I do. Then only thing that happens is that the dialog box disappears, taking me back to the "info screen" where I can approve but before I'm able to do anything, the dialog box prompting me  for my Apple ID comes up again. I enter the password, and so it goes until I choose "cancel" in the dialog box. I then get back to the "info screen". I've never tried to press the deny button there. The second notification that I got, the one on my phone, worked without any trouble at all. Would be nice if I could get the notification for requests number 1 and 2 (the ones I got on computer work and computer home), but I haven't found any notification on the phone for those two apps.

  • I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

    I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

    More everything. I have one line coming up on the 19th of this month and I'd like to transfer to another user with a later upgrade date. Just not seeing the option anywhere.

  • Sending Notification to a User (common box) without attaching an employee..

    Dear all,
    I expect all of yours help on this doubt.
    I have created custom notification using wf_notification.send based on my logic, now I want to send these notification to common inbox in the Oracle. For this purpose i have created a user and attached the responsibility which includes notification inbox. I don’t want to attach an employee to this common user id because more than 5 people will be accessing this account. Because not attaching an employee, notification are not going to this common box, is there any way to solve this problem. When I am sending this notification to a user where employee already attached, it is working fine.
    Regards,
    Jojo George

    Dear Jojo,
    Can you please provide the details and procedure to create custom notifications. I need to create for oracle self service HR. i need to send the notifications of certain actions like termination, absence etc for particular persons
    Thnak you,.

  • Problem with Notifications on Create User/ Change User Password

    Hello,
    I'm having a problem sending emails to users when an account is created in OIM.
    I added a notification to the user and user's manager on the Create User task in the Xellerate User process definition but the emails are not being sent.
    I know that if I create another task with the purpose of sending emails and invoke it through the response in the Create User task, it will work.
    My aim is to avoid adding tasks for something OIM should be able to do OOTB.
    I'm also unable to send an email when a password is updated.. I did the same thing as for the Create User and I know the task (Change User Password) is being invoked by looking at the logs but the emails aren't being sent.
    Has anyone ran into such problems?
    I'm having these problems in the Xellerate User process task.. i've added notifications in other process tasks (mainly approval tasks) and they are working fine.
    Thanks in advance

    Hi,
    I am just confuse with your response.Have you added the "Password Updated" task in xellerate user provisioning process?
    Now if you changing password in OIM profile it will trigger "Change User Password" task not the "Password Updated" task and even if you add "Password Updated" task on Xellerate User provisioning task you can't see this task in Resource Details.
    Now assume if you added your notification on "Password Updated" task of any resource which user is provisioned to even then when you change oim password it only trigger "Change User Password" task.So try to have your notification on "Change User Password" task.
    Please clarify so that I can response correctly.
    Regards
    Nitesh

  • Error Account user="demonw7\SAPServiceP71" does not exist. PI 7.1 EHP1

    Hi,
    I had error message during installation of PI 7.1 EHP 1, The error is
    RACE      2009-08-25 16:29:11.656 [synxcuser.cpp:2121]
               CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
    existence check for user demonw7\SAPServiceP71 returned false.
    INFO[E]    2009-08-25 16:29:11.656 [synxcuser.cpp:147]
               CSyUserImpl::CSyUserImpl(const CUserData&, bool)
               lib=syslib module=syslib
    FSL-01027  Account user="demonw7\SAPServiceP71" does not exist.
    TRACE      2009-08-25 16:29:11.671 [synxcuser.cpp:302]
               CSyUserImpl::CSyUserImpl(const CUserData&, bool)
               lib=syslib module=syslib
    Exception thrown near line 149 in file synxcuser.cpp
    Stack trace:
    iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
    d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
    iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
    synxcaccmg.cpp: 114: bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
    synxcaccmg.cpp: 88: PSyAccount CSyAccountMgtImpl::getAccount(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
    synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
    syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false)
    syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false, ISyProgressObserver* )
    synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
    Please Advise ? do i need to create the user manually ?
    Best Regards
    Fernand Lesmana

    Hi Juan,
    I have checked and re-tried to install from beginning but now got another problem :
    ERROR      2009-08-26 10:21:10.437 [sixxcstepexecute.cpp:984]
    FCO-00011  The step doConfiguration with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|1|0|NW_MSS_DB|ind|ind|ind|ind|3|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0|doConfiguration was executed with status ERROR .
    TRACE      2009-08-26 10:21:10.468
    Instantiating new NWUsageTypeBasic
    Please advise
    Best Regards
    Edited by: Fernand Lesmana on Aug 26, 2009 4:59 AM

  • Account user

    I will keep it short.
    - Just a beginner on PHP, but understand it a little.
    - Here is the issue: I am trying to create when a user logs
    in, it goes to another page with there account info(including there
    username and password)
    That’s it!
    I hope you can help me.
    Thank you

    You sent me a private message, BUT you don't have private
    message reception enabled so I could not reply! Luckly, I saw your
    post here. Here is my response to you private message:
    There is a bit more to it than just logging in and being
    redirected to another page.
    You need to create a database to hold your users details,
    such as first and family name, an email address, user priviliges,
    password and username.
    You then need to create a secure registration page, which
    takes the users details and writes them to the database and creates
    their account. That page would need some validation checks in it to
    check for things like an existing password or username and redirect
    the user if the registration fails. If they are successful you need
    to redirect them to a page of their choice (possibly one that they
    tried to enter before they were registered). You need to secure
    their password and that needs encryption.
    You also need to be able to administer your users and that
    means deleting and updating as well as creating records in the
    database.
    The whole thing is rather involved and you will need some
    help in this area. The best book that I can recommend is David
    Powers' The Essential Guide to Dreamweaver CS3 with CSS, AJAX and
    PHP. There are several section in the book that will help you
    create what I have described here. The book is published by Friends
    of Ed. Try Amazon.com for a good deal.
    Regards

  • Family Base in Alaska

    I have 3 lines that I use Verizon Family Base for.  2 lines are here in Alaska. I've only added data restriction. The 2 lines here in Alaska are able to recieve/send text and recieve calls except make outgoing calls which they get an error message that says "Please re enter the 10 digit number you are dialing, do not press send"  Once I take off the data restriction, the lines work. So I need to know what is going on. I need the data restriction turned on or my data overages will be out of control. Please help!

        islandgirlinAK,
    Thanks for the info! While the users are located in an extended coverage area, the functionality of Family Base will vary. If removing the data restrictions helps with the outbound calls, I would recommend removing the feature. Do you run into this same issue with the device not located in Alaska?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Family Base - Alert messages

    Please explain to me what the "red alert symbol" means within the Family Base Alert Messages. 
    Also, is there a way to see the text message details posted to my child's phone through my Family Base account?  Or is that only possible by physically taking my child's phone?
    Thank you for your help!

    Keewaydin, we want managing your family's usage with the Family Base feature to be easy breezy! The red alert symbol advises you that that the line has exceeded or is approaching the allowance limit. For more details regarding Family Base, click http://vz.to/1dJRZEC  For your convenience, you may view the text messaging details online at My Verizon. These details will include the mobile number, date and time.  However, I apologize that for security purposes, the actual detailed verbiage is not available. Click http://vz.to/1nvKlnG to sign into My Verizon to view that usage detail.   LasinaH_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Family Base restrictions not working

    We setup a family base account per the instructions and video. The time restrictions seem to be working fine but the list of trusted numbers is not working. Our son is still able to send and receive text messages through his iPhone 4 to anybody unless we specifically block their number on the Verizon account.
    We found that even with Family Base restrictions setup, imessage bypasses those restrictions so we turned off imessage on his phone and setup restrictions on his iPhone itself. This stopped him from being able to use the imessage feature of the iPhone but people who are not setup in his trusted numbers are still able to get text messages through. We're frustrated because the family base is not working the way it's supposed to and we're being charge for this "feature." 

    Hi Billiam!
    I'm sorry for any inconvenience with your son's iPhone 4 and the Family Base feature. Upon review of this feature, I see that the child companion app is not compatible with the iPhone device. Some features will work, and some will not, but this is due to the design of the iPhone. Here is some additional information for you: http://vz.to/15gGAxd
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Family base set up wrong

    I added family base to my new account but the system shows my sons line as being a parent line and I am not able to change that in the system, so basically family base is useless to me. Not sure how to get this changed as I have tried everything in the system for this. Any ideas? I have tried to select it and change him from parent to child several times but the box is checked and not changable.

    Call and have them switch it. 800-922-0204

Maybe you are looking for