FAQ: If I make a feature suggestion, will I see it in the shipping product?

Adobe is always eager to hear what users think and feedback will be considered for future versions of Photoshop.

If you have an Apple router now providing your wireless network, you could add another....like an AirPort Express, for example....to "extend" the signal wirelessly and provide more coverage.
This is always a bit tricky, because the AirPort Express would need to be located where it can receive a strong signal from the main AirPort wireless router.
For example, if you need more wireless signal in a bedroom at the end of the house, you would locate the AirPort Express about half way between the main AirPort router and the bedroom.
On a side note......only the print function will work when you connect an All-in-One device to the USB port on an AirPort, so connect the All-in-One using wireless for full functionality.

Similar Messages

  • How to make a program that will ask for a name the first time the program is used and if is not the first time will not ask the name?

    I want to make a program that will ask for the ID of the testing machine the first time the program is running, then will never ask for it. I'm using Labview 6.0

    Hi
    There are a Couple of methods you can use for this.
    Method 1 -
    You can create an ini file and save a boolean Key "First Instance" as True. Now In your Program you read this Key, If it is True then you can show your ID Dialog VI.If False do not run the VI. At the Conclusion of Id Dialog you can update this registry enrty to False. So In effect you have created One time Event. In fact you can save ID as another Config entry.
    The Drawback and advantage is that such an INI file can be edited by someone moderately knowledgeable about the Program
    Method 2
    Use Unitialized Shift Register in A while Loop. Please see LV2 style Globals entry under this forum. You can read and write to this Variable and it retains the Value it last had within it.
    You can read
    this Global the Very first time and say if it true you display your ID Vi. If False you dont. When you display your ID Vi you can Update your Global Like Before.
    If you need Example Let me Know.
    Good Luck
    Mache!!
    Good Luck!
    Mache

  • HT201382 Our family all bought each other gift cards for Christmas and set up our iPads to family sharing.  When any family member makes a purchase, it will only be charged to the credit card and NEVER the gift card amount! WHY? Is there a way to fix this

    We just set up family sharing on our iPads and we all have$50 of iTunes cards that have been placed on our accounts.  Why can no one in the family redeem the money from their itunes cards... Instead being charge ONLY to the "organizers" credit card? This is driving us crazy? Now all our Christmas present have gone to waste? Can anyone help?

    Hello there ssyer,
    Family Sharing purchases do all go to the Organizers credit card by default, that is unless there is an existing credit or balance on the account requesting the purchase according to this article:
    Family purchases and payments
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
    Balances can be verified with this article if you need:
    iTunes Gift balances
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I have a ipod mini, i upgraded my battery, and drive to 32 GB, my itunes will not see it, and the mini only shows file pic error. I have a 10.4.11 powerbook 667 so i can't upgrade to a newer itunes, which is 4.7.1, all i want is a better battery-more song

    Hi,
    I have a older ipod mini which needed a battery, so i also upgraded the drive to a 32 GB flash drive. When i did the upgrade, it saw the itunes fine, but it never loaded anything. When i unplug it it shows the folder with "!" icon, and i can't get my itunes to see it. I have a powerbook 667 mhz g4 with itunes 10.4.11, so i can't upgrade to leopard. All i wanted was a better battery and a bit more song volume. This older 4 GB will fit back in and works fine, but i'm upset i spent $37 to only fail. What am i doing wrong? itunes is 4.7.1 How can i over come this?

    In Disk Utility, select the iPod (the device) in the sidebar.  So, if you see the iPod in the sidbar with a "volume" indented below the iPod, select the "device" (not the volume).
    Go to the Erase tab to the right.  The choice for Format is Mac OS Extended (Journaled).  Name does not matter, because iTunes will rename it during the Restore.  Click Erase.
    it "flashed" out of itunes.
    That may be an issue with the USB connection.  As a test, shut down (power off) the Mac.  Disconnect other USB devices including USB hub, except for standard USB keyboard and mouse (if normally used).  SInce this is a laptop, connect it to its power adapter, so that it's not running on battery power.
    Connect the iPod to a direct USB port on the Mac.  Note if there is any difference regarding the iPod not maintaining a connection.

  • When will we see details about the iphone 4?

    Anyone hear about when they are releasing more information about the iphone 4? Plans, pre-orders etc.

    "iPhone 4 will be available for pre-order to Verizon Wireless customers only, on a “first come, first serve” basis via VerizonWireless.com, on or around February 3rd 2011 – details to be confirmed a week prior by Verizon Wireless. New and existing customers can purchase in select channels on February 10th 2011."
    Funny they say ON OR AROUND wonder if it will be before

  • PS CS5.1 [was: 5.5] will not see my Canon 550d cr 2 files

    I am running a mac on os x and Photoshop 5.1 . I just purchased a canon rebel 550d (T5i I think) It will not see any of the images. This must be an Adobe issue as the MAc finder and preview sees the images.
    SO I have downloaded and tried to install various camera raw updates. 5.1 5.7 6.1 6.4 7.1 7,3 nothing seems to work indeed one of them failed to open. ver 6.1 will not open as an error code comes up. this error code relates to not being elligable for the version, yet it says cs 5. cs 5.5 and 6 are worthy.
    CAn someone help please.
    regards Paul
    Message was edited by: Paul the Artist

    Paul the Artist wrote:
    I am running a mac on os x and Photoshop 5.5 .
    Do you mean Photoshop 5.5 (shipped in 1999) or Photoshop CS5 (shipped in 2010)?
    If 5.5 (1999), then it's unlikely to ever read Raw files.
    If you mean CS5 then try Help > Updates to update your Camera Raw to version 6.7.
    Direct link for Camera Raw 6.7 for Mac
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5370
    The 550D has been fully supported since Raw 6.1
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • How do you make an itunes feature suggestion to Apple?

    I'm trying to find a place to make an itunes feature suuggestion to Apple, but all I seem to be able to find is a "request music" link...
    If this is the only place, then here is my suggestion...
    I am a video editor and I use itunes to play my music, but also to audition sound effects and production music tracks. But when I do a shuffle play of my entire library, I don't really want to hear these sfx and songs (or the audiobooks I've taken from an audiobook CDs).
    Therefore, I think it would be useful if there was some kind of "flag" that said "this is not a song" or "don't include in shuffle".
    Alternatively, what would be great for me, is if itunes could have multiple libraries, then I could have a normal music library, a sfx and production music library and an audiobook library.
    Anyway, I guess I can dream.
    Chris.

    The iTunes feedback is confusing indeed. I use the general Feedback page to report bugs and to do suggestions.
    They assure that the messages will be read, but you won't get a reply.
    As this is a user-to-user forum, it is highly unlikely your suggestions will be read by Apple employees (except moderators).
    You can exclude songs from shuffling by checking 'Skip when Shuffling' in the 'Options' tab of the Info window (Get Info of a song; shortcut: command-I)
    Unfortunately, you can only do this song by song.
    Using this script, you can enable/disable 'Skip when Shuffling' of all selected songs.
    You could put the songs/sfx in a playlist, select them all (command-A) and run the script.
    To run multiple libraries, you can choose between these two applications:
    iTunes Library Manager and Libra.
    Although not real instant switchable libraries, both apps. can create multiple 'iTunes Library' files, which enables you to have separate libraries for all kinds of files.
    Hope this helps.
    M
    17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.4.7)   Several ext. HD (backup and data)

  • Keyword Bugs and Some Keywording Improvement / Feature Suggestions

    Tagging Bugs and Some Improvement / Feature Suggestions
    Please excuse where I should use the word Tag or Keyword or vice versa!
    1.       BUG?    If a tag synonym is added or changed then all affected photos should be marked for re-publish.  I do not think this currently happens.   Should this possibly be considered a bug?
    2.       BUG?    When viewing a smart collection in a Flickr publish service and a new tag is added to a photo it is correctly moved to the “requires re-publish” section.   However … the thumb selection in the grid moves to the next photo, the loop view remains on the photo just tagged and the key wording still reflects the just tagged photo.    The selection shown in the grid appears to be wrong.      When working quickly this can result in tagging errors as the user looking on the grid believes he is working on the next highlighted photo in the grid.      This is surely a bug?
    3.       BUG?      A minor point and I realise this is probably not the correct way to do things … but a double word synonym entered with quotes for example “Ice Climbing” will create two tags “Ice” and “Climbing” at the flicker end of things.    Removal of this synonym and forcing a re-publish does not delete these two tags at the flicker end of things.    I may have miss-understood, but perhaps it is best for LR not to allow quoted tags? 
    4.       SUGGESTION      An easier and more powerful way to review tagging of current photos should be provided whereby it is possible to clearly see the current tagging of a photo and have immediate access to the keyword list at the same time to make corrections.    Having both the Keywording and Keyword List panels open in Library mode results in a lot of up and down scrolling for me and is a slightly inelegant UI in my opinion.   I would suggest it should at very least be possible to have the tags viewable in Loop info as an option - so long as no truncation is made and all tags visible.    Ideally a better way should be sought.
    5.       SUGGESTION      It would be very useful when reviewing tagging to select to show all photos in the currently selected folder or set which do not contain the selected tag.    Note, I don’t think this can be easily achieved by using a keyword filter and selecting all keywords and unselecting the tag of interest as the pictures may have many tags.    The same might be performed by textual based searches but this is inelegant and its slowness precludes a browsing approach.     For example – for me it would be useful to look at all my mountain shots in a trip which have not been tagged with “Glacier” and it will be immediately visually apparent where I need to make tagging corrections.    I would suggest a “Not” checkbox is made available on the top of each column in the library filter – this may also provide a great deal of power for other situations.
    6.       SUGGESTION      It would be useful to allow a means of showing all pictures with a certain tag but which have not been tagged yet with any children of said tag.   For example all pictures tagged with Glacier which I have not yet named the glacier by introducing a relevant child tag or selecting an existing child tag.    A similar situation occurs for wildlife and potentially many other scenarios … I would like to use a tag “Butterfly” which I can quickly use on my first pass… and then do the identification and child tagging on a second pass using appropriate filtering.   This allows for a step wise or “top down” approach to tag classifying things in a workflow.    I appreciate this can be achieved (as I do now) by using a child tag called “Unnamed butterfly” or “Unnamed Glacier” but it seems more powerful, elegant and generically applicable to be able to filter on a “not tagged with a child” basis.
    I apologise if I have missed the point on some existing functionality on any of these points and welcome any suggestions.

    This is a great post.
    I couldn't have written it myself better.
    I'm also in dying need of Korean input as I can't communicate with my Korean friends.
    But I second every point.
    I hope the tech teams are reading this.

  • Attach 64TB disk(s) to Azure VMs - please vote up this feature suggestion if you need it too

    http://feedback.azure.com/forums/34192--general-feedback/suggestions/6555737-attach-64tb-disk-s-to-azure-vms
    Each Azure storage account comes with 500 TB of block blob storage capacity. However, this vast storage
    is not available to be used via an Azure VM. 
    The best we can do right now is attach 16x 1TB disks (page blobs) to an A4 or bigger VM. This poses few
    problems: 
    1. 16TB is way too small for many use cases such as using Azure as backup/DR target 
    2. This coupling of storage to RAM/CPU is undesirable and drives enterprise clients to other cloud providers. 
    When will Microsoft provide us the ability to make VHDX 64TB+ files in Azure block blob storage and
    attach them to Azure VMs? 
    Dozens of cloud providers make such functionality available. When will be able to have the same in Azure??
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

    This is a useful feature. I have voted it. Thanks Sam~~
    Regards,
    Tough_v

  • How do I permanently STOP the Bing Suggested Sites icon from being in the IE 9 toolbar for everyone and make it the default for all new users

    Non of the other post on this subject were correctly answered and they are now old so here is a new thread for a question that a Microsoft Engineer should have answered a long time ago in one of the other threads.
     I have IE 9 installed.
    I am setting up my default profile which will be used for ALL users to configure their profile when they log on. All profiles are destroyed on system reboot. All PCs are frozen.
    Every time I log in as a new user and open IE 9, the favorites bar shows up as I want it with NO BING Suggested Site crapware in site. Then about .5 secs after IE starts and the Favorites bar is shown, the EVIL "Bing Suggested Sites" button appears.
     I can delete it and it seems to stay away until I delete the users profile folder etc and have them log in again. When the profile is recreated the Favorites folder does not have a "Suggested Sites" option in the c:\users\username\favorites\links"
    folder. (I have deleted the hidden .ini files in the default folder) Nor does one exist in the "c:\users\default\favorites\links" folder from which the newly created user profile folder comes. But as soon as I start IE 9, one is created and placed
    in the users favorites links folder. This MUST STOP!!!!!!!!!!!!! This is UNACCEPTABLE. AND IT MUST BE STOPPED!!!!! Where in the Windows 7 x64 Enterprise OS is the location of this evil action and how do I PERMANENTLY delete it.
    I don't EVER want to see the EVIL BING Suggested Sites button anywhere on the PC especially in the Favorites Tool bar on IE 9. An I expect/demand that Microsoft tell us how to 100% cannot fail get rid of it for ALL USERS FOREVER NO MATTER WHAT!!!!!!!!!!!! I
    have spent a lot of time perfecting my default profile making sur that ALL options are decide by me NOT MICROSOFT. I NEVER USE SYSPREP as that will destroy ALL custom defaults every time.
    When a user logs in in to one of my PCs and they start IE 9 they get REAL Google for the default search engine, not the version Microsoft will give you which first sends all search requests to Microsoft so they can spy on what you searched in Google for etc.,
    but real Google, not sent to Microsoft 1st. (I'll bet more than 90% of the readers of this site did not notice how if you let Microsoft set your default search provider to Google, they fix it so that all search requests go to Microsoft 1st, before it gets
    sent to Google. Look at the search string under manage your search providers, in IE 7 & 8. In IE 9 it is hidden, but still there. HOW EVIL OF MICROSOFT)
    With my default profile IE does not ask how you want to set it up, I have already made those decisions. I have made all those decisions for my users. But as of recently I have started installing IE 9 and now this unacceptable BING Suggested Sites junk ware
    keeps showing up. HOW DO I STOP IT. Do I have to put a line in my HOSTS file to send all request for Bing.com to 127.0.0.1 just to make sure that it can't be used. There by removing all possibility of my users ever being able to use Bing FOREVER.
    I would rather not do that but unless a Microsoft representative will tell me how to keep that useless Bing Suggested Sites button from appearing on the Favorites tool bar I will have to. I would love to let my user decide if they want to use Bing and waist
    their time trying to find good search results, but I will not have it forced on them and I will not allow it to be on the Favorites tool Bar ever. So will a Microsoft Engineer please tell us how to put a permanent end to the "Bing Suggested Sites"
    button for ALL users ALWAYS FOREVER.
    Thanks,
    Ralph

    Hi,
    I suggest you try the steps in this thread for test:
    Disable Suggested Sites does not work.
    http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
    Regards,
    Vincent Wang
    TechNet Community Support

  • How do I get iCal to sync to my iphone 4. It used to work and now it won't. Any suggestions will be most appreciated.

    How do I get iCal on my Mac to sync with my iphone 4.
    It used to work and now it doesn't.
    I am not on MobileMe or the Cloud.
    Any suggestions will be most appreciated.

    Hi Arezzo
    I'm asuming you are using iTunes then to sync? this can be done over WiFi or the USB cable.
    Review your setting for the calendar sync once iTunes is open and your iPhone is connected. Make sure your Calendars are selected to sync that you need. By default all calendars will.
    So the option i have for you is to reset the sync service and this will reset those settings in iTunes. Meaning that you will have to switch them on again in iTunes to sync. But this mostly clears unresolved sync issues.
    Please do yourself a favour and hit backup in iTunes before doing any testing. iTunes will then keep a local backup of your iPhone in case of any data loss.
    {added}
    open Terminal from your Utilities folder and paste this command in to reset. OS X 10.6 - 10.8
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full [press Enter]
    if it prompts for a password, just type your password and hit [Enter] again.
    Open iTunes then set your syncs up and it should then carry on again.
    Message was edited by: WaldoWTM

  • ITunes User Feature Suggestions

    I think it would be beneficial for Apple and the users to have a dedicated thread
    for User based feature suggestions ,So with this in mind I hope you add this as a sticky or ad this as a category all it's own .

    A built in album art/pdf. viewer : As Music makes it's change more and more over to digital distribution artists are making the art/packaging available in.pdf and ,or embed in the mp3's themselves however the user "experience" in this is laking .
    A built in viewer for the "digital booklets " and embedded art would add that missing streamlined sexy appeal we mac users are missing and accustomed to .

  • New feature suggestion:  Graphic Pitch Adjustment

    Hey all -- Digital Performer user here, but soon to make the move to Logic (as soon as the new desktops come out in 2008). There is just one major time-saving feature I am missing in Logic, and I thought I'd post it here. I've also sent this suggestion to Apple .
    That feature is the ability to graphically adjust audio pitch. Digital Performer has, for a couple of years, had the ability to analyze pitch on any audio as soon as it's recorded, and then allow users to graphically adjust it +*right in the audio track*+. I'm an owner of Antares' Auto Tune plugin, which has graphical adjustment ability, but it's a real pain. Also, it's a plug-in, and not inherent right in the audio track. Here's a link to the page for that feature at MOTU's site:
    http://www.motu.com/products/software/dp/features46/pitch-automation.html
    Again, this feature is a huge time saver, and something I really can't do without.

    So that's basically Melodyne Plugin but built right in the track view. Would be handy I suppose - I've just come from SONAR which has it's own version of this (called V-Vocal) but it's not quite so integrated as the DP example you linked to.

  • ITunes Plus FAQs doesn't make sense: Needs a tutorial and clear instruction

    Hi,
    My wife and I have spent over an hour trying to "simply" purchase anything in iTunes plus and the FAQ's don't help. I haven't a clue how to do it, or would I really want to given the the Question (if I'm reading it right) "Can I still buy music encoded at 128kbps with DRM?" Answer: No.
    If I won't be able to buy the usual iTunes music available at 128kbps that makes up the majority of iTunes music purchases (hardly anything i want is available in itunes plus) why would I want to cut myself from buying the larger available music source? I must have misunderstood this, but as we can't seem to find a way to upgrade yet, prices still reflect the itunes music, (no link to a plus version or a plus price) iTunes haven't exactly made upgrading songs transparent. I think they need to post a tutorial to show the process.
    When I click on the itunes plus I'm presented with an album and 3 songs from my own library (not my wife's even though we were in that when we clicked on the upgrade) I guess I can upgrade those if I take up the special offer. But no information beyond that. No info on what that will do to her library, my library, future purchases not available in iTunes plus, etc.
    Concerns about upgrading a library of a few hundred songs and being billed for all that is putting me off taking up the offer at the moment.

    I'm not sure I understand your question. Tracks are available only in two formats: the "normal" format of 128 Kbps AAC with copy protection which makes up the bulk of the content on the iTunes Store, and iTunes Plus tracks (currently offered only on music from EMI and from a few independent labels) which are 256 Kbps AAC without copy protection. As of several months ago, the price for Plus and non-Plus tracks is identical and you don't have a choice of which you select; if a track is iTunes Plus, it will not be offered in the lower-rate copy-protected format (there's no reason why anyone with sense would not want their tracks as iTunes Plus).
    So when you go to buy a track, if it's iTunes Plus, that's the way you'll purchase it and the only format in which that track will be available. You'll be able to tell by the "+" symbol next to the price.
    As to upgrading, when you click on the iTunes Plus link and then Upgrade, the iTunes Store will then show any tracks you have purchased - and it's by the iTunes Store account you are logged into (it's based on the account's Purchase History), not the library currently in use that governs what upgrade options are shown - that are eligible for upgrade to Plus. Depending on what label released the tracks you bought, there might be many eligible for upgrade or only a few (or none). When you upgrade (and you have to upgrade all the tracks at once; you can't pick and choose), iTunes will give you the option of just replacing and deleting the old tracks, or replacing them and keeping them. If you choose the latter, iTunes will move the old versions to a separate folder.

  • When using Firefox and Bing, auto search suggestions will not populate even though all options for it are enabled.

    If I try to perform a search using Firefox as my browser, and Bing as my search engine, auto suggestions will not populate. I can use other search engines with Firefox and they work, and I can use Bing in other browsers and it works.

    If you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
    [http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]
    If security software issues can be ruled out, you can also reset Firefox and check.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

Maybe you are looking for