Faxes are not sent automaticly in Tx SOST

Good day,
System Info:
SAP ECC6 7.0 Sup Pkg 133
Oracle 10.2.0.2
HP-UX 11.11
We have an ABAP programs that creates a report that is to be faxed to customers.
The program runs and puts the faxes in SOST. They are however marked with "Still no entry in queue" code "672"
I have to manually select them and then "repeat sent"
I am running RSCONN01 as a scheduled background job, every 10 minutes. I have 2 of them, one with variant SAP&CONNECTINT for sending my emails. The emails are sending after the job has run. There is no problem.
The fax variant is SAP&CONNECTFAX. After I have added the faxes to the "repeat sent" this job is sending them out.
I have searched for SAP Notes but didn't find any relevant ones.
My question is, can I automate the process of putting the jobs in the queue.
Regards
Vaughn

Juan,
I will find out from our programmers if we can implement the suggestions. I have came across the Paid solution earlier today, but will have to investigate further.
I will let you know what option was taken and what the outcome was.

Similar Messages

Out of Office Messages are Not Sent Out

Hi there,
I have an issue with Outlook's Out of Office feature. The Out of Office messages are not sent out (to both internal and external contacts) although it has been already turned on. Only one user is having this particular issue.
I've attempted these steps but the issue still persists.
a) Turning on OOO via OWA
b) Deleting the current profile and creating a new profile
Could anybody help me in this?
Regards,
Vinod

Hi Vinod,
You issue might be related to this:
"By default, the out-of-office reply to Internet recipients (external senders) is turned off. Many administrators do not allow out-of-office replies to be sent outside the Exchange Server organization, so that unauthorized people do not
know when users are out of the office. "
You might want to follow the steps in below KB article to turn on out-of-office replies to the Internet or contact your administrator to check so:
http://support.microsoft.com/kb/323665/en-us
Hope it helps and feel free to post back.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

IOS 5: regular messages are not sent if one recepient is registered with iMessage

There is a bug in iOS 5: SMS messages are not sent if one receipients mobile number is registered with iMessages.
This is confirmed by the developer of the team sms app: if you send a message to a number of receipients and one of the recepients mobile numbers, the message is sent do, is registered with iMessage, then none of the recipients will receive the message.
Does anyone know a work around until Apple comes up with a bugfix?
Regards, Til

I am not sure about the details of your case, but I can confirm that a message does send to multiple recipients even if one of this has iMessage. I recently sent a message to two people, one with a BB and one with an iPhone 4 (iOS 5 and iMessage working). Because of the difference, it resorted to the least common denominator and sent the message as a standard text to both people. I was replied to by both parties. Based on your description I can confirm that your detail is not the case.
Have you checked through the settings in Messages? Do you have a texting plan associated with your account? I am sorry if these questions seem stupid, but they are worth asking to verify.
I hope this helps!

Wf mails are not sent

Hi
Workflow mails are not sent.
The global preference was set as Do not send emails, we changed the same to mail with attachments. After that we ran resend failed or undelivered messages request. Even then the messages are not sent.
mail_status is null in wf_notifications table for all of these messages.
None of the activities are errored.
I appreciate if any body faced similar situation and can point me where things are going wrong.
Thanks
Prasad

The notifications that were sent when the preference was set to "Do not send mail" are not considered failed or undelivered. Those notifications at the time they were sent were not supposed to be sent as e-mail.. so not sent. If you want them to sent as e-mail, you will have to manually update the MAIL_STATUS to MAIL, run $FND_TOP/sql/wfntfqup.sql to rebuild the mailer queue. This will take care of sending all those e-mails.

I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent.

I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent. When sending an email, Mail apparently works for a while but does'nt sent anything. I repeated sending the mail with the same result and 2 or more mails in the draft folder. Yesterday I discovered that the mail had been sent 4 times!. Now I have the same problem: the mail has not been sent, it appears in the draft folder, I try to delete it but the mail remains in the draft folder. This happens after updating to Mac OS X 10.7.2 and migrating to iCloud.
I have MacBook 2 Ghz Intel Core 2 Duo, 4 Mb ram memory, Mac OS X Lion (10.7.2).

If those music are greyed out in iTunes on your laptop, are you able to play the music? If you cannot, it means that you probably deleted the mp3 file or moved it to another location where iTunes can no longer find. If they are greyed out on iTunes and cannot play them, I would just right click and delete it. Then re-sync with your iPad.

Some POs are not sent to supplier via email

Hello all,
During the PO ordering to supplier via email, some POs are not sent to the supplier.
the document output status is in incorrectly processed in the table PPFTTRIGG.
Pls help me with any standard job is available to execute this incorrectly processed PO outputs.
Regards
Madhan

Hello Maddan,
If some of your action status have errors occured during processing, you cannot re-process PO edition: you have first to identify what was the error.
So, get the application keys (PO number) from table PPFTTRIGG for which status is "2". Then, check in transactional what is exactly the error for each PO concerned.
Regards.
Laurent.

The prices are not coming automatically

Hi gurus,
In batch determination. When i am creating a sales order the batch number is coming automatically. But the thing is the prices are not coming automatically. what could be the reason. Even though i maintained the prices conditon records in vch1 but the system not picking up automatically. Please give the solution. It is urgent
Thanks & Regards
cheers

Hi,
Batch valuation is possible with the std functionality.
It will allow to valuate each batch saperately.
More information,
http://help.sap.com/saphelp_46c/helpdata/en/61/969838e914a20de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
Valuation for a Single Batch
Use
You use valuation for a single batch if you want to separate costs for externally processed batches from costs for internally processed batches, and if you want to keep the price and value of each individual batch in inventory management on a value basis.
Integration
Valuation for a single batch is carried out using separate values, just as partial stocks for a material are distinguished according to origin, for example. In valuation for a single batch, a separate characteristic category is created for each batch (batch number = characteristic category).
Valuation for a single batch is a special kind of valuation type for batches.
Prerequisites :To work with valuation for a single batch, you must choose valuation for a single batch (indicator X in the standard system) as substance characteristic type in the material master record.
regards,
Siddharth.

Images in javascript are not uploaded automatically

Hi,
My webpage has a javascript using images.
When I do "Put Site", dreamweaver do not understand that these images also should be uploaded.
How do I tell Dreamweaver that my Webpage also is depending on these images so that they also
are uploaded automatically?

OK, but is there a work-around? Can I manually tell Dreamweaver to include additional files upon "Put"?
Date: Mon, 18 Mar 2013 13:11:39 -0700
From: [email protected]
To: [email protected]
Subject: images in javascript are not uploaded automatically
    Re: images in javascript are not uploaded automatically
    created by MurraySummers in Dreamweaver - View the full discussion
You cannot. DW does not parse javascript for such references.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5158157#5158157
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5158157#5158157
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5158157#5158157. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT5181 iPhoto for iOS: Photos in iphoto's Camera Roll folder are not updated automatically with edits from other programs

How can I solve the problem în the subject?

How can I solve the problem în the subject?
What exactly are you trying to do?
Have you been editing photos in iPhoto and want to add them to your camera rool or photo stream?
Then do exactly as the article describes, that you lonked to:
iPhoto for iOS: Photos in Camera Roll are not updated automatically with edits from iPhoto
Use iPhoto's Sharing to save a copy of the edited photo to the Caera Roll, or explain on mor e detail, what you want to do.
Regards
Léonie

Few POs are not sent to supplier via email

Hello all,
During the PO ordering to supplier via email, some POs are not sent to the supplier may be due to object lock (temporary isue).
The document output status (2) is in incorrectly processed in the table PPFTTRIGG.
Pls help me with the parameter to be filled in the report "RSPPFPROCESS" so that i can create a variant and schedule daily.
Regards
Madhan

Hello Maddan,
If some of your action status have errors occured during processing, you cannot re-process PO edition: you have first to identify what was the error.
So, get the application keys (PO number) from table PPFTTRIGG for which status is "2". Then, check in transactional what is exactly the error for each PO concerned.
Regards.
Laurent.

FF Logs are not sent to the controllers

Hello SAP Gurus,
We have implemented GRC 10 on SP10, have configured EAM, and the Firefighter logs are populating afte running GRAC_EAM_LOG_SYNC_UPDATE, the notification is sent immediately to the FF owner after the FF ID login, but to trigger the workflow to populate Log reports after executing GRAC_EAM_WORKFLOW_SYNC, the email are not going to the controller, have checked the workflow notiifcation settings, its configured, and the parameters are set to "YES".
The sync job executes only for a second and gives the message as workflow sync is completed, but the email are not sent out.
It was working fine few days ago, but now the job runs only for a sec.
Any help or suggestion would be helpful regarding this?

Hi Alessandro,
Thanks for replying.
The concern is the Workflow ysn was working fine few days ago,where the emails was sent out to the controlers and now seems to be broken, am i missing something on the configuration?
The MSMP for the Firefighter log report is active and generated.
Will apply the below notes , as it seems the notes are not available in the system,
http://service.sap.com/sap/support/notes/1804320
Will keep you posted with the results.
Thanks again.
Regards,
Sindhu

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

Work Flow EVENT - SM58 Entries are not executing automatically

Hi Experts,
I have used the standard BOR2034 for creating PO after saving the contract.
I have developed an RFC enabled FM refering to the Standard FM SWW_WI_CREATE_VIA_EVENT.
Inside the custom FM I am calling the BAPI_PO_CREATE1 for creating PO.
After creating a contract using VA41 I am able to see in Event trace that my Event with corresponding custom FM is triggering.
and the two entries are created in SM58 - Transactional RFC one is my Custom FM name and another is SWF_EVT_HANDLER_START_INTERNAL.
When I execute the LUW by selecting execution, PO is getting created. Where as this entries are not picking automatically.
I want to know, whether I have missed any step in process or do we need to schedule any job for automatically clearing the SM58 queue entries.
Please help me in resolving the issue.
Responses are highly appreciated..
Warm Regards...

Hi Natasha,
As you say that you see the below entries in TRFC monitor, you need have a commit work after the below FMs are called(just one will do),
the two entries are created in SM58 - Transactional RFC one is my Custom FM name and another is SWF_EVT_HANDLER_START_INTERNAL.
How and from where are the above FMs called?
Regards,
Chen

Upgrade packages(mups) are not sent to ALL mobile clients

Upgrade packages are not sent to all mobile clients even though there are
subscriptions assigned. There are 3 sites(A,B,C) with these
subscriptions. Only one site(A) receives the package. The other two
sites(B and C) doesnt receive the package and their outbound queue doesnt
show the messages.
The subscriptions were earlier removed for these sites (B and C) and then
added back.
Generated all the bdocs in smoggen, gnrwb and sent the package again but in vain.

the generation did the trick. the queue has been stopped in between and that is the reason why the packages were not sent after the bdocs were generated.

I get an error message where my IM's in AIM are not sent

When I send IM's in my AIM profile some are not sent I get the following error message "The message “XXXXX…” could not be delivered. Your message could not be sent." I notice that it happens when I send a long message but it will send if I break up the message I'm trying to send. Is there any fix for this? Thanks a bunch!

Hi,
There does appear to be a Character limit to IMs.
Copying an pasting crash logs can lead to this issue.
It can be better if you start the chat as Direct IM (See Buddies Menu) or convert it to Direct IM by including a pic or file in the chat.
This only works one-to-one and not in Group Chats.
8:12 PM Monday; March 15, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Faxes are not sent automaticly in Tx SOST

Similar Messages

Maybe you are looking for