Faxes received and print, will not save

i had my computer set up to save faxes and print them. now, they are only printing. i tried reassigning the fax save folder, but still no result. they print fine, they just won't save.
help!

I purchased Numbers after my free trial.
If you didn't delete the free trial before installing Numbers from the App Store, you need to do that.
The best way to uninstall an app and all the associated files is to use a utiility such as AppCleaner for Mac - Uninstall your apps easily
Check your Applications folder. Delete both the Numbers app you downloaded from the App Store and the trial version.
Then re download Numbers from the App Store using the same Apple ID used for the original purchase. You will not be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed  then click Install.

Similar Messages

  • MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

    I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

    Very weird day in Firefoxland
    First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
    Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
    Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
    WOW!! Are the wheels off the wagon here or what!?!

  • Installed Maverick on new IMac and printer will not print

    I purchased a new IMac in December after always having PCs so there has been a learning curve for me.  A few days ago I installed the Maverick update.  So far, so good except my printer no longer will print.  I have a new Canon MC7120 printer/scanner.  I am still able to scan, but not print.  When trying to print, I have received a popup telling me to install software.
    Would you be able to walk me through what I am suppose to do?  I am assuming I am to install software again that I installed when I purchased the printer.  Being new to Macs, I don't want to do something I shouldn't.  Your help would be appreciated.  Thank you

    The printer is not listed as supported on this page:
    OS X: Printer and scanner software available for download
    You may be able to get it to work with the software from here:
    Canon U.S.A. : Consumer & Home Office : PIXMA MG7120

  • Elements not always opening and sometimes will not save a file

    I am fairly new to Photoshop having only previously owned PSE 10.  When i upgraded to 11, i was seriously impressed but now i have the most annoying problem.  Usually i can open a raw file sucessfully the first time and edit/process it with no problems but if i then try to open a second one, nothing happens.  If i open elements first and then open the file it will work but then, when it comes time to save the file, nothing happens.  there are no error messages, nothing  freezes, nothingn happens at all!
    The only thing that i  can think of is that i did a silly thing!  When i was looking in the folder with all my files, i saw the new .xmp file that is added after processing a raw file.  For some unknown reason, i thought that it would be a good idea to change the "opens with" setting for it.  I now do not know how to remove this setting or what to change it back to.  At the moment it is set to notepad.  I am not sure if this is relevant as i can usually open the first photo successfully and everything works.  It does, however, require a complete restart if i want to work on another picture.

    You can't do that with any email app. It's an email, not a document in a text editor or word processor.
    To save it as a separate document, click anywhere in the body of the email and press Command+C to copy it. Paste it into a blank Word document and save it.

  • Photoshop AND Illustrator will not save- no error message

    I am on a mac and I have CS5. There is no error message, but when I go to save the 'save' button is not clickable, only the cancel one. I have space on my computer so that is not it, I have gone through all the settings and I have seen nothing that seems out of place.
    Thanks!

    Often if I update iTunes, i need to reaccept the terms etc when i reopen it.
    If you have other programs open, you often cant get this "terms acceptance" screen to come up.
    I suggest closing all open open programs and then trying.

  • Scan will not save

    Windows 8.1 - HP MFP1536 will not save the scan. You can see that the document has been scanned but it will not save it. I tried saving the scan to different file types such as .pdf or .jpg. No go. When I run HP Scan doctor jit just sits there and churns away.
    This is a follow-up to a situation about a month ago where the scanning control panel would not even open after a forced windows 8.1 upgrade. At that it was recommended (on this forum) that the HP print software be uninstalled and reinstalled. I did that and it resolved the one issue - getting a scanning control panel. I never checked the functionality of the scanner at the time as this is my wife's machine. Today she neede to scan an item and it will not save.
    What should I do?

    I am sorry that you are still seeing nothing. I would like to find out if scanning is successful on your machine. During a scan the HP Scan software saves scanned images to the user's temp folder prior to finalizing and saving the scanned document. Please try another scan, but before clicking 'Save' or 'Done' in the scan preview dialog, check the current user's temp folder location for scanned images.
    Location of current user's temp folder: C:\Users\<current user>\AppData\Local\Temp\hpscanNNNN\
    where <current user> is the name of the current user on the system and NNNN is a random 4-digit number (you will have to choose the hpscannNNNN folder that was most recently created).
    (Hint: you can enter %temp% in Windows Explorer as a shortcut to the above folder path)
    (NOTE: you will need to allowing viewing of hidden files and folders to see the 'AppData' folder)
    In this folder should be the scanned files that are "ready to be saved". If files exist, then the scan was successful and there is something (a bug in the software?) that is preventing you from saving the files. If no files exist, then the scan was not successful (a different type of bug in the software or drivers) - and you shouldn't see any scanned images in the scan preview screen.
    If you see scanned files in the temp folder, then you can use them (cut & paste to your folder location). But, this doesn't solve the larger problem of saving to your chosen local folder location.
    Another thing to try: save a file using a different application to the same folder location you are trying to save scanned documents. For example, try saving a BMP from Paint or a TXT from Notepad. Does this work?
    Uninstalling and reinstalling the HP software probably will not help, but you can try this again if you'd like. (You mentioned in your original post that you already performed a uninstall/reinstall.)
    Regarding the HP Scan and Capture application, most of the 'not-so-good' reviews had to do with connectivity of the scanning application to various HP All-in-One printers. Many of these connectivity issues have been corrected; and, if HP Scan and Capture application can successfully connect to your device, then is a good, albeit simplistic, scanning application that will allow you to save your scan to a file. It might be worth a try. (If you don't like it, then you can always uninstall it.)

  • Firefox will not save my Connections settings, so opens on manual proxy every time, rather than No Proxy?

    I'm using Firefox 4.01 and it will not save my connections settings when I set them to "No Proxy" keeps defaulting to manual therefore it wont load any pages until I change it to "No Proxy" which I have to do every time I open firefox.

    See:
    * http://kb.mozillazine.org/Preferences_not_saved

  • Will not save swf- "the parameter is wrong"

    I created a very simple file in Flash CS4, a plain background and two layers, each with some text which is hyperlinked.  I decided to test it before proceeding further, and it will not save as a swf at all!  I continually get an error message that "The parameter is wrong".  That's all.  I had the publish settings set to Flash Player 9 and AS 2.  I tried various combinations of Flash Player 8, 9, and 10, and As 2 and 3.  Same error message....
    This file has almost nothing in it!  What am I doing wrong?

    Weird weird weird- my Flash 10 was very twitchy for awhile today, then seemed to calm down, and I was also able to create a swf from a new fla file, in which I accepted the default publish settings of Player 10 and AS 3.  Later, I was able to do a SaveAs and change parameters to Player 9, but left AS at 3. Seemed to work fine......
    Some of the issues I have had with Flash, Photoshop, and also Fireworks, is possibly due to the fact that I bought CS4 and installed it in parallel to CS3.  Didn't want to lose work previously created in CS3 programs, but, oddly enough, Adobe has me registered properly as the owner of the CS3 suite, but when I try to register the CS4 suite, it claims the serial number is already registered (but not to me!).  Very odd, since I got that serial number via student verification through Adobe.  Oh well, I'll just cope, since I don't feel like sitting on hold for 1-2 hours waiting to talk to an Adobe CSR, who will likely suggest an (OH NO!!!!) re-installation....
    Thanks for checking that file.  The gremlins appear to have retreated for the time being.

  • OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility  and Repair permissions for a temporary fix. How can I get a permanent fix?

    After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
    bettyfroomneedham

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

  • Aperture 3.0.2 will not save Print Presets

    I am extremely frustrated right now as I burn through very expensive paper. Aperture 3.0.2 will not save any of my Print Presets. I have two Epson Printers a Epson Photo 900 and and Epson R2400. I want to print to the Epson R2400 and when I do, the photo comes out all screwed up it keeps putting in Adobe PDF 9 as the printer. I had my printer completely dialed in and could print orders with no problem in Aperture 2.0 lost all those settings upgrading to 3.0. Attempted to duplicate them, but it will not save my Printer or Paper Size. I have an order to fill and it's looking like it's going to cost me money because of all the paper I am wasting trying to get this to print. Tried numerous posted tricks and nothing is working.

    I discovered the image quality was a more basic duh thing. Had to clean my print heads. However, the Presets will STILL not save my printer or paper size.
    -Kirk

  • My printer receives and prints my e mail but not the attachments how do I rectify this?

    My printer receives and prints my e mail but not the attachments. How do I rectify this?

    Hi robgpearce,
    Your issue could be related to the file type or a setting with the file. In the help section of ePrintCenter.com, it goes into details on how the HP ePrint service does not support printing webpages via email at this time, HP is currently developing dedicated solutions to support webpage printing from mobile devices. Image files (like jpeg, bmp, tiff, etc) need to be at least 100DPI in order to print via ePrint. PGP encryption, digitally signed documents, macro-enabled spreadsheets and password-protected documents are not supported by ePrint at this time and will not print.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • My gmail account receives mail, but will not send, forward, or reply...it gets stuck in the spin and then I have to force quick firefox.

    My gmail accounts receives mail, but will not send, reply or forward. Also cannot open settings. It gets stuck in spin mode.
    I worked with an apple tech, tried several things, and then she suggested I contact Mozilla support.

    Hey Butterworth,
    You may need to use the information in this article to help you troubleshoot the issue with your outgoing server:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Asking for iCloud account name and password to play iTunes radio when I have done it in the past many times without this question.  Will not accept my apple id and password.  Will not save my changed password.  Where do I start?

    I have a MAC with OS X Yosemite, version 10.10.2, 8GB, 2.7 GHz, intel core i5.  Until 2 days ago, I could click on iTunes radio, pick my station and listen.  Then 2 days ago, I do this and system asks for my iCloud account id and password.  Does not recognize apple id or password.  I change the password, does not save it.   Screen that lists 2 step verification asks for added security questions, I do those and still will not allow me access.  What do I do and where do I start?  I thought I should download the update to OS X.  I did that, still no change.  Please help direct me to where I need to go to fix this problem.
    Yogiowl

    Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
    Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password.

  • HT5622 I have just received a new iphone 5s and need to set the Apple ID with my work email.  I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use my work email as the Apple ID on my new iphone. What do I do

    I have just received a new iphone 5s and need to set the Apple ID with my work email.  I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone.  As it is a work phone I need to use this email address as my Apple ID.  How do I do this?

    when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

Maybe you are looking for