FCP Export to finalize Bluray on Sony DVD architect (PC)

Hello all. I have my first BluRay challenge and I have read all about the steps to achieve a bluray burn on the MAC by exporting from FCP and finalizing in Toast. Now I do not have a Bluray burner and looked at getting an external but still too expensive. I do have a buddy that does his Bluray burning on the PC using DVD Architect so my question is how would I export from FCP to burn on the PC? I know for this program the export has to be in .m2v format so can I just convert via compressor as I normally do to burn onto DVD or go via Toast to convert and then transfer over to pc to finalize. Any help or suggestions greatly appreciated. Thanks

You can just use Compressor but you want to know precisely what the PC's expectations are for bit rate, frame size, and all of the other subtle variables that can be set for .m2v. You also need to be certain you understand the PC's drive format requirements for delivering your files. That's not as easy as it seems because some formatting limits individiual files to 2 or 4 gigs, maybe the drive from your Mac will not open at all on the PC. It's needlessly tricky.
bogiesan

Similar Messages

Premiere CC 2014.1 Blu-ray MPEG 2 export causing error in Sony DVD Architect Pro

I've filed a Bug Report for this but wanted to post here in case it helps anyone else or on the off chance someone can give me a solution / better work around.
Something has changed in the results of a Blu-ray MPEG2 export from Premiere 2014.1 vs those of the previous CC version. The result is that my authoring software of choice, Sony DVD Architect Pro, fails to prepare a disc image giving an error in the final stage of preparation. This workflow has been working fine for 2-3 years.
My work around is to export to original format (mxf / XDCAM EX HQ) and then go back to Media Encoder CC rather than 2014 to produce the Blu-ray MPEG2 file, which works without problem.
Here's a copy paste of my bug report in case anyone with a similar setup has an opportunity to replicate (I'd be very grateful to anyone able to confirm whether its a bug or something specific to me that I might be able to fix).
******BUG******
Export from Premiere 2014.1 directly or via Media Encoder of MPEG 2 1080 50i Blu-ray files causes error in preparation of Blu-ray disc in Sony DVD Architect 5.2.
This error does not occur when using the same Media Encode export preset in the previous version of Premiere Pro CC / Media Encoder.
Steps to reproduce bug:
1. Export Sequence from Premiere
Export, in my case XDCAMEX 1080i HQ, using a media encoder MPEG 2 Blu-ray preset:
Preset Name: HD 1080i 25
Format: MPEG2 Blu-ray
Bitrate Settings: Medium (Target 25Mbps)
2. Create DVD Architect 5.2 project
Set up as single movie Blu-ray project in DVD Architect:
Disc format: Blu-ray Disc
Resolution: 1920*1080
Framerate: 35 interlaced
Choose the file exported from Premiere
3 Prepare Disc
- Select Make Blu-ray Disc
- Click Prepare
- Choose Location of iso
- click next then finish
Result
Around 50% - 60% through the process the following error is displayed:
An error occurred while preparing compilation
Details:
File name: STREAM/00000.m2ts
Status: TSWrapper.dll::CTSWrapper::ProcThreadMain::Failed to read ES file. - The ES file may be shorter than the size described in the MUI file.
Expected results:
A shiny ISO ready to be burnt to disc and sent sent to eager customers.
Its taken me a full day and a half to isolate problem - someone remind me why I fall for the software updates every time?!
Cheers
Iain
Other details:
Windows 7 pro 64 SP1
Intel Core i7 950 @ 3.07GHz
RAM 24.0GB
ASUSTeK P6T DELUXE V2
1279MB NVIDIA GeForce GTX 470

There is a known bug in the H.264-Bluray export. I assume it has nothing to do with your issue, but perhaps it will give you something to consider.
https://forums.adobe.com/message/6848505#6848505
It appears due to a malformed xmpses file. It creates a problem on import into Encore, and I think it should do the same upon import into Architect or it would be ignored entirely. The test is to delete the xmpses file and see if that avoids the issue.

Clarification using Elements 7 and Sony DVD architect please ..

Hello all,
I am close to finishing my 2nd set of "How To" instructional DVD's.
I have been reviewing the required steps in order to create a menu with "Sony DVD Architect."
I see in a past discussion that it was mentioned to:
“ .. Export [your Elements project] as an MPEG2 file without DVD markers, then adding the DVD markers and menu in either NERO or Sony DVD Architect Studio .. Note if you export MPEG2 you need to use the smart-rendering in the applications to ensure your video isn't re-rendered ... resulting in a slight quality hit.”
Is this still a good way to do this? Would it be better/worse to export the Premiere Elements
project as an ".avi" file and pull that ".avi" file into Sony DVD Architect? Then, render with Sony DVD Architect?
Thanks!
--Tom Nickel

Steve,
Thank you very much for your prompt reply!
Yes, I wasn't concered about markers, I figured that I'd create all of that in DVD Architect.
But, you've raised an issue that I had not thought about!
My DVD will be about 1 hour, 25 minutes.
Of course, I did expect a small loss in quality as some compression will be required in order for the material to fit on a standard DVD.
So, where sould the compression be done? I know that Elements will compress down to whatever length is necessary
(To render, a selection something to the order of: "fit contents to disk").
Even if I "pre-compress" in Elements to fit on a standard DVD will DVD Architect re-compress the program material?
Thanks again,
--Tom Nickel

How do I transfer a Pre8 Project in to Sony DVD Architect

Pre8 is just dissapointing. I have not had any luck with this product especially regarding menu creation. In order to creat a better menu I would like to transfer my project in to Sony DVD Architect. Can anyone give me some advice on how to do this?
Thanks,
Nick

I do agree. They have one of the best authoring programs, that I have ever used. I do not know what their sales numbers were, when it was a stand-alone, up through EncoreDVD 2.0, but even if they had to do two, slightly different versions, I'd love to see them put it for sale alone.
Going back to EncoreDVD 2.0 (my version), there were basically two versions, or at least variations on it. If one bought is separate, there was no Adobe Dynamic Link. If one bought it as part of the Production Studio (as I did), one got Dynamic Link between it and PrPro. Now, with CS3, Adobe Dynamic Link has been improved, and with CS4, there's more improvement and strengthening. Maybe trying to separate out a version with Dynamic Link and one without, would be too much coding now. Or, it could just be a lack of sales. IIRC, it was about US$300 for the stand-alone. Maybe there was just no market for it, regardless of how good it was. I'm just glad that Adobe did not kill it off, and continues to keep it in the suites for PrPro. However, I love my EncoreDVD 2.0 so much, that I would never give it up. Now, when I move to BD production, I will either need to upgrade to CS4, or CS5, and get the newer version of Encore for that.
Hunt

How do I export a 98 min video edited in FCP 7 to IDVD for single disc DVD burning?

How do I export a 98 min video edited in FCP 7 to IDVD for single disc DVD burning?

Your current settings should match the source material in your timeline. Though, it probably doens't matter what it is as long as your settings are not for a highly compressed format like h.264 or mpeg2.
iDVD should take any all "I" frame format and encode it. (All I frame formats include DV, DVCProHD, ProRes).
x

Is there is a way to export the themes from iDVD to DVD Studio Pro?

OK...so here's what I'm trying to find out: is there is a way to export the themes from iDVD to DVD Studio Pro? Or can I build the project in DVDSTPRO and import it to iDVD to build and burn?
I've read several threads here and haven't come across my specific question. If I missed it, please copy me a link. Otherwise, I'd like to use the templates/themes in iDVD with my FCP project.
I was thinking about importing the project from FCP to iDVD. Then, I thought about the markers etc....
So, if anyone had an idea, tip or link, I'm all for it!
Thanks!
ron

Importing iDVD Projects and Themes
DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5. In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
To import an iDVD project or archived project into DVD Studio Pro:
1 Do one of the following:
• Choose File > Open.
• Press Command-O.
2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
DVD Studio Pro imports the iDVD project.
About the iDVD Project Import
When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
The standard locations that DVD Studio Pro uses are (in this order):
• iDVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically
configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
• iDVD application bundle: This is the iDVD application file that contains the default theme elements.
Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations.
If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
Issues With Importing iDVD Projects
There are some issues to be aware of when you import iDVD projects:
• If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
• When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
• The button highlights used in iDVD may look different when imported into DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
• When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
• If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
Source: +DVD Studio Pro User Manual+

FCP export settings for import in iMovie '08

Q: What QT/ Compressor export settings do I need to use in FCP in order to be able to import the MOV file in iLife '08?
The reason for using iLife '08 is solely for sharing the movie to dotMac.
(if you know alternatives bypassing iMovie '08 ... be my guest).
Background:
I create my footage with a Sony HDR-HC7.
I capture the footage on my Macs (G5 and MBP) via FCP.
I edit my sequence in FCP using the HDV sequence presets
I output using FCP export to Quicktime. MOV file has HDV properties.
Funny: the captured MOV file with HDV properties can be read by iMovie '08 , the edited sequence with exactly the same HDV properties can not be read by iMovie '08 .
I tried a Compressor conversion to:
- Apple preset iTV --> no import
- Apple preset iPod video --> no import
- Apple preset m2v and m4v --> both no import
- Apple preset mp4 --> no import
iLife help mentiones that it accepts DV, mp4 and some MOV formats.
Q: what is the list of "some"
Please help.
Coen

Q: What QT/ Compressor export settings do I need to use in FCP in order to be able to import the MOV file in iLife '08?
Don't have FCP v5/6 but with older FCP/FCE usually use AIC for crossover in MOV file container.
iLife help mentiones that it accepts DV, mp4 and some MOV formats.
Q: what is the list of "some"
I have personally used DV, AIC, MJPEG, MPEG4, H.264 and i believe Photo-JPEG with which another individual indicated he was having problems. As to audio for these files, usually use DV, Linear PCM ("Big Endian" Integer), AAC, or even uncompressed. Avoid Apple Animation and Apple Video compression formats which will import/edit but will not correctly export. However, be advised that there are some caveats. E.g., a "Large or Full" slideshow export from iPhoto places the MPEG4/AAC data in an MOV file container which iMovie '08 will not import. However, if you use the MPEG Streamclip "Save As..." File menu option to save the same data in an MP4 file container. Therefore, would say that some problems here may be associated with iMovie '08 "pre-scanning" of files and possible minor bugs in proper error trapping on compression formats vs file containers.

Sony DVD Camcorder to iMac

I've been trying to figure out a way to import video from my Sony DVD camcorder. I've searched these forums and so far much of the advice is not to buy Sony DVD camcorders. While I understand the good intentions of this advice, I like all the other advantages which the Sony DVD camcorders offer.
That being said, I have two questions which will help me decide whether I really should return the Sony DCR-DVD 205 and/or use a Sony DCR-DVD 305 instead:
1) Some others have suggested exporting the A/V out from the DVD camcorder and feeding it into the analog port of a DV camcorder. I happen to have a DV camcorder (broken lens but fine for this purpose) which can record the analog input onto a DV tape. This allows me to use the firewire out from the DV camcorder to the iMac just fine. I have tried this technique and while it is a hassle it appears to work well. Here's my question: Am I losing a significant amount of quality or resolution by converting DVD to analog to DV to iMac? The picture quality seems OK so far but I'm wondering if I am missing something.
2) So my next question is thiis: Is it worth getting the 305 model instead? Unlike the 205, the 305 has a USB 2.0 port. But from everything I have seen, USB 2.0 ports are far from ideal when it comes to transferring digital quality video.
Thanks in advance. I am going a bit crazy trying to figure out what to do about this.
iMac g5

welcome TeamIguana to the  board ...
you've done your research on this board about DVDcorders, so you do know, the iApps don't support such devices ... you miss the convenience of simply plug-in/hit import/done... and some others...
you have two options:
convert from dvd (please use the forum search for that popular issue), or, as you wrote, a playback-analoge-digital conversion...
the loss in pic quality happens while playback a dvd...- you record in a codec called mpeg2, which is a very, very effective compressor...- a standard iM project of 2h=~26GB gets compressed with mpeg2 to fit onto a 4.7Gb single-layer dvd-r...
to be so effective, mpeg uses different "tricks", e.g. it doesn't store every frame of the 30fps a video contains... dv (as on miniDV, or iM's native internal codec) does so... as you probably know: mpeg2 is a delivery format, no edit format...
so answer to 1): due to mpeg standards, you have a loss of pic quality. any miniDV would be ... better.- but it has to fullfill your tastes and standards, if it is ok to you.. just do it
ad 2) iMovie doesn't support the import via usb2.- when you're lucky, you get some Sony-made app with that device which allows to remotely control the corder via usb2 to force it to playback/stream the video to the Mac.. HardDrivecorders behave like some ordinary harddrive, easy to drag'n drop file from them to the Mac.. but a DVDcorder? even, when you hit manually "play"... how should your Mac know what to do with that stream of data coming via usb??
you guess it allready; I'm not convinced by DVDcorders
so, just to feed my personal curiosity:
I like all the other advantages which the Sony DVD camcorders offer.
... which one?

FCP export to Vegas for color correction

I work in FCP, I don't have the best eye for color, so I'm having a friend do the color correction with a PC, using Magic Bullet and some other software. Rather than exporting the entire film, or entire scenes, which he'd have to go back and cut into individual shots in order to edit them all individually with their own color treatment, he has me exporting every shot from the film and exporting them to his harddrive or DVDs for him to work on. I've been doing it a scene at a time. It's incredibly tedious, very easy to screw up (if a shot goes a few frames long and under another shot, for example, it's out of sync, and if I forget a shot, mislabel a shot, get out of order when labeling them, etc, it's out of sync, etc), and I'm sure, at some point, I'm going to screw it up and it's going to be very annoying. Is there any more practical way to do this so that he has the markers, the shots are cut already, etc, but he doesn't have to reconstruct it from a thousand shots I've exported one at a time? I don't want to make him go back and make all the cuts himself, either, though that actually seems slightly easier to me.

"I don't have the best eye for color" means I'm color blind. I don't appreciate the "learn the 3 way" comments. You can learn to drive a manual all you want, but if something in your brain tells you train tracks are highways, you're bound to run into trouble. And a train.
The other editor lives an hour away, and he hates working on a Mac. He came here once and tried to edit using my system, but he couldn't get the hang of it. Add to that he came an hour each way to do that, and I had to pay for his gas, that made it very expensive, timely venture. It also means he'd have to have, say, at least 4 hours set aside each time he wanted to edit, to travel here and make it worth his time to do so. At home, he can do it anytime.

Is Compressor as good as FCP export?

If I select Best Quality 4:3 90 Minutes
how do I tweak it further
and/or is this akin to
Final Cut's ability to export MPEG-2
with 2-Pass VBR, 7.5 + Mbps, Best Motion Quality
option that seems to have been discontinued?
thanks

Hey Evan,
from my calulations, you would need to encode your 90 min. movie at an average rate of 6.3 Mbps to fit on a dvd-5 (and thats assuming you are using .ac3 for audio @ 192 [stereo]).
but to answer your question, i would much rather use compressor than the export option in FCP, although technically it does use the compressor engine because of the control you have in compressor over FCP export.
think of it like using iMovies for editing vs. FCP.
Mikey

Using Sony DVD model camcorder with Mac

Does anyone have any idea how to use the Sony DVD Handycam with a Mac? I can watch the DVDs on the IMAC but I can not download the DVDs to imovie to edit my own home videos. The Sony people told me to buy a PC, some help.

This DVD camera records using MPEG-2. That is the same as most all of the new Hard drive cameras.
This format is for playback and is not intended to be used as an editing format.
You will need to convert that format into a DV format that imovie can use.
MPEG Streamclip http://www.alfanet.it/squared5/mpegstreamclip.html is free and Apple's QuickTime MPEG-2 Playback Component http://www.apple.com/quicktime/mpeg2/
is about $20.00. They are the tools that you need to download to convert these files.
Once you have done that, export to DV Stream (.dv) and import it into iMovie.
Sue

SONY DVD RW DW-U10A Won't read Double Layer DVDs since 10.4.9

Folks
Been browsing for an answer to this problem, and it seems these SONY DVD RW DW-U10A — for a start — are not very reliable, but I also notice quite a few stating they have had problems since upgrading to 10.4.9.
I am trying to re-install my FCP Studio after a crash on my G5, now it SEEMS my SONY DVD RW DW-U10A won't recognize the disks that are double-layer.
I don't want to go off buying a new drive if the problem is in 10.4.9 — and if Apple are going to remedy the 10.4.9 problem.
Any help from anyone?
Regards
Roy

Folks
Further to this — tried to install (as an experiment) on my iMac, which has a Pioneer Drive, and it reads the disks okay — with 10.4.9!
So.......?????
Roy

Error message when burning to Sony DVD-r discs

Just bought 200 Sony DVD-R printable discs from Costco, and I am trying to burn a 15 minute short film in DVD studio pro. The DVD just spins in Formatting and I get this message:The recording device reported the media error: Unknown device error.
I have burned this same film many times with my Nexxtech DVD's and it works fine, but the Sony discs don't seem to work. Any suggestions?
Thanks,
D-

Try burning at the lowest possible speed (probably DVDx2) and see if they work.

Sony DVD Burner and 350 mhz AGP not being recognised by iTunes

I managed to get a Sony DVD Burner for my friends Powermac g4 AGP, the sales assistant sais it would be comatible for macs....it installed fine and wa sable to read dvd's perfectly, when my friend went to burn a CD from iTunes it would not work as it seems the drive is not supported. I have tried finidng some drivers all over the sony website for it but to no avail. I don't suppose anyone has any experience with this brand of burner? Any help would be appreciated thanks.

As I recall, Sony's internal DVD burners are made by Lite-On, but as far as the G4 is concerned - the drive's firmware indicates a Sony product. A compatibilty problem for burning a disk occurs, when the CD/DVD drive is newer than the supporting profiles for Apple's Disk Burner software. Have you checked into "PatchBurn?" Other than that, your friend could purchase Roxio's "Toast," which has more user settings than Apple's software.

Imovie keeps quitting during import of movies from Sony DVD Handycam

While importing movies with my sony dvd handycam, imovie imports 7 clips and stops...I have successfully imported many movies before and can't figure out why it continues to quit? PLEASE HELP

I am having the same problem with imports from my Canon vixia. I've imported many movies and clips successfully before this, but now, all of a sudden it won't import squat and I haven't changed any settings.....HELP!!!!!!

FCP Export to finalize Bluray on Sony DVD architect (PC)

Similar Messages

Maybe you are looking for