Fiel to RFC sync Scenario

Hi Experts,
My Scenario: EDI to RFC Synchronous scenario.(Order Status Inquiry interface-- 869/870)
Guys could you suggest whether do i need to use BPM to achieve the output file.
1. we have EDI struture imported from stylus studio and used two mappings as follows
Mesage Mappings:
EDI input request xml file (869 EDI xml File) -
RFC request structure
RFC response Structure -
EDI output xml file (870 EDI XML file)
Interface Mappings:
one interface mapping
My doubt was i have seen some scenarios in SDN that we can achieve sync scenarios without using BPM with the help of module configurations in the file
adapter.
Else do we need to go for the BPM to achieve such scenarios.
Thanks,
--Sai.

Such scenarios can be easily achieved using standard SAP module Request Response bean (without using BPM)
Chk this:
http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29
http://wiki.sdn.sap.com/wiki/display/XI/UsingRequestResponseBeanModuleinFILE+Adapter
Thanks
Amit

Similar Messages

Xml validation in File to RFC Sync Scenario with Validation fails message

Hi All,
We are using PI 7.4 (Dual Stack) the Requirement is File to RFC Sync Scenario(File <---> RFC).and need to do XML validation against XSD Schema. if any Validations fails Response message should send back to sender.RequestResponseBean standard module is using for File to RFC Sync scenario but how to send the response message to sender if any validation fails. adapter level XML validation is not helpful for this requirement. please help out me how to achieve the requirement with graphical mapping.
Thanks in advance.

to validate schema you cannot solve it with graphical mapping but validating the schema in the AAE or the integration engine.
y recomend you to use the AAE validation at sender side, coz the sender system will be notified in case of schema errors.
The response will be validated at Integration Server level.
you can search in the forum, you will get many document about how to configure it.
take a look to my blog: PI 7.3 - XML Validation

SOAP to RFC - Sync Scenario. How to find where the response is going to?

Hello All
I have a SOAP to RFC sync scenario.
In SXMB_MONI, i see that both the initial message and the response message are successfully processed.
But, the SOAP sender is not receiving the response message.
How can i trouble shoot this scenario? How can i findout what is going wrong?
Most importantly, How can i find out the web address of the SOAP sender? I do not see it anywhere.
Thanks

Hi Chandra,
Please check this blog.
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
You can by pass your message through a TCPIP gateway , this will help you to see the message contnet and the SOAP header information.
TCPIPGW application is availabel in one of the SAP notes for Monitoring SOAP adapter. and 2 SAP SDN PI blogs are also there on how to use this application...
Regards
Sunil.

SOAP to RFC sync scenario

Hello members:
we have a business scenario: SOAP to RFC sync
an external system (ABC) sends documentrequest thru XI SOAP adapter and makes an RFC call to a BAPI and gets back the resposne to the ABC system.we are handling 4 mappings. 1. request msg to a common msg 2. common msg to BAPI request3.bapi response to common msg 4. common msg to response msg(which is same as the req msg)
i have the request msg and common msg as external definitions. I did the following steps and wanted to
know if i am right.
1. there are no data type & msg type needed for this
2. 4 msg interfaces
i) document o/b sysnc
ii) document i/b sync
iii)common o/b sync
iiii) common i/b sync
3) 4 mappings
i) document to common
ii) common to bapi req
iii) bapi resp to common
iiii) common to req/response
4) 3 intf mappings
source intf**********               target intf
i)document o/b               common o/b uses mapping #1
ii)request :common i/b         bapi i/b uses mapping #2
   resposne:bapi i/b           common i/b uses mapping #3
iii) common i/b             document i/b uses mapping # 4
pls provide your inputs if my approach is rite? do i need to have 4 msg intefaces?has any made mappings where 4 mappings are involved ( without BPM)
Thanks in advance

Hi,
I think you will have only 2 interfaces.
1. Sync Outbound interface (SOAP Structure)
    Two message types Req and Res
2. Sync Inbound interface (RFC Structure)
    Two message types Req and Res
Then two message mapping
1. SOAP Request to RFC Request
2. RFC Response to SOAP Response
and finally one Interface mapping.
Thanks,
Prakash

File RFC sync scenario error: MsgId alredy exists in the system

Hi,
I am working on File RFC sysnc scenario.
The first message that I tried to processed gave a error
com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date ' ' has a wrong format at field REQ_DATE_H: Unparseable date: " "
When I retried correcting the data, it started giving strange error
Message ID 62D07CA0D3EE11DCCD36DA01C52F0606 for pipeline CENTRAL, version already exists in system.
How to rectify this?
XI version is PI 7.0 SP10

Nisar,
Which program to re-run? Are you talking about activating the channel again? If so, then I have done it many times changing the file name.
I got below error in Communication Channel Monitoring:
2008-02-06 02:27:39 Error Received XI System Error. ErrorCode: MSGGUID_EXISTING ErrorText: ErrorStack: Message ID 83F8B0B0D48311DCA544DA01C52F0606 for pipeline CENTRAL, version already exists in system
2008-02-06 02:27:39 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error Transmitting the message using connection http://xibox:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:.
2008-02-06 02:27:39 Error The message status set to FAIL.
2008-02-06 02:27:39 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MSGGUID_EXISTING:
2008-02-06 02:27:39 Error Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException

Soap(sync) to RFC(Sync Scenario ,error in response

Dear all,
For Sender,I created 2 message types
request
record
getdetail                        1..1
Response
Details
Records                       0..1
items                             1-- unbounded
1                                    0-1
2                                     0--1
3                                     0--1
4                                     0--1
The Rfc is imported in to Imported objects which has similar structure as source i.e same occurrences and higher levels.
I took 2 message mappings
1)MT request to RFC Request
2)MT Response tp RFC Response
Operation mapping
req_out(MT req,MT_res)---- RFC(MT)
The problem is while testing in operation mapping ,I am getting error in Response.
in Message mapping as an individual mapping it is working fine(tested in mm test tab).
I did not configure the ID,Is it required to get the response.
if not pls provide me pointers on the same.
We are using PI7.3,are there any changes in generating and publishing the WSDL.
Can I use Integrated configaration for this scenario.
If I use it where to pudlish wsdl as there will be no sender agreement to publish in SR.
Thanks
Pi

Hi,
>>>The problem is while testing in operation mapping ,I am getting error in Response.
COnfiguration objects need to be created & test as full scenario.
B'cos, it need to hit RFC of ECC & provide back the response.
>>>in Message mapping as an individual mapping it is working fine(tested in mm test tab).
so, the mapping part is working fine.
>>>I did not configure the ID,Is it required to get the response.
if not pls provide me pointers on the same.
Yes. configure the ID objects.
>>>We are using PI7.3,are there any changes in generating and publishing the WSDL.
Not sure, but, it should be same. Create all the objects & generate the WSDL.
>>>Can I use Integrated configaration for this scenario.
Yes. it can be used.
>>>If I use it where to pudlish wsdl as there will be no sender agreement to publish in SR.
why NO SA. it should be created in this scenario.
-santosh.

JDBC Sync - RFC Sync Scenario without BPM

Hi Experts,
I am using JDBC - RFC - JDBC Scnario. The concept is
JDBC is reading data from tables and send data to RFC, after updating RFC is giving response to JDBC to update its tables.
JDBC - RFC - JDBC.
Is it possible to do this scnario without using BPM?
Experts pls advise me.
Regards
Bala

Hello Bala,
These links are useful to you..
JDBC Sender/Receiver adapter
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/jdbcTOJDBC&
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Thanks,
Satya

RFC to JDBC to RFC sync

Hi all,
Anyone have any link for RFC to JDBC to RFC sync scenario step by step?
(For reverse one means JDBC to RFC to JDBC used RRBEANS configuration in sender jdbc channel and created one receiver JDBC channel.)
What should I do for the same?
Any suggestion?
Thanks,
Arthita

Hi Inaki Vila,
2. Where I need to configure the RRBEANS ? In which channel?
In the RFC sender channel, the first channel to be used. You can check it in the wiki that i mentioned above.
Could you please provide the wiki link for the same?it ll be very helpful.
3. Is it applicable for reverse scenario?
Suppose JDBC is sender and I'm using one RFC. For that also no need to use any bridge (RequestResponseBean) ?
If you want to take the data from DB source and to pass to an ECC system via RFC you wont need any bridge, you can do a normal async scenario JDBC - RFC.
I'm asking for JDBC - RFC sync scenario where I'm using one RFC.
Thanks,
Arthita

JDBC to RFC Sync Error

Dear All,
I'm creating JDBC to RFC Sync scenario.
Configured according to below link,
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/12/04/jdbc-to-jdbc-synchronous-scenario-with-rr-beans-and-without-bpm-and-rfc-lookup
Sender JDBC structure is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_JDBC_To_RFC_Source xmlns:ns0="http://FiletoFile.com">
   <row>
      <A>12</A>
      <B>34</B>
   </row>
</ns0:MT_JDBC_To_RFC_Source>
But in Test tab of MM_REQ is showing Red.
Why its showing red?
PFA the attached Screenshot.
Thanks,
Arthita

Hi Arthitha
You cannot create structure of some kind and use completely different kind of input payload.
If your expected payload is of format
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_JDBC_To_RFC_Source xmlns:ns0="http://FiletoFile.com">
   <row>
      <A>12</A>
      <B>34</B>
   </row>
</ns0:MT_JDBC_To_RFC_Source>
Then your Data type should be created as below
Regards
Osman

Receiver RFC synchronouse scenario question:

Dear All,
I have a doubt in Receiver RFC sync scenario. for example file to XI to RFC.
Question: when ever Response RFC is triggered in R/3 Side. How the data reaches XI.
By just creating Synch Communication channel for the RFC in XI, will the data to come to XI for RFC respose.
How when a Respose RFC is Triggered in R/3 Server, how the data points or reaches XI port?
How the Auto Triggered RFC Respose data points to XI and Comes to XI in a Synchronous RFC Receiver scenario.
PS: I am not from ABAP background. if any code has to be written in R/3 side for making the response RFC point to XI, please provide a generalized code also if possible.
Please Advice,
Prakash.

RFC destination,port at XI would help to get response data
No need to write any code,because RFC provide sync communication.
use links RFC Scenario using BPM --Starter Kit
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Exposing BAPI as Web Services through SAP XI
RFC Scenario using BPM --Starter Kit
The specified item was not found.
The specified item was not found.
HTTP to RFC - A Starter Kit

Need Clarification on JDBC--RFC Sync

Hi All,
in JDBC----RFC Sync scenario, do we use BPM to get the response from the RFC??
Why because JDBC is not having the Sync nature.
Regards
Vamsi

Hi,
its not necessary to use BPM to get response with out BPM also we can get the response. Better try to avoid BPM because of the performance issue.
Please refer this link
http://help.sap.com/saphelp_nw70/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Thanks
Vikranth
Edited by: Khimavath Vikranth on Jun 4, 2008 11:31 AM
Edited by: Khimavath Vikranth on Jun 4, 2008 11:39 AM

Jdbc-rfc synchronous scenario

Hi...All,
we r plaing to do JDBC-RFC Synchronous Scenario with out BPM,please tell me any settings are required for this scenario.any body is having any links regarding this type of scenario pls share with me...that is helpfull for me...
thanks in advance,
Pasi.

Hello Pasi,
JDBC-RFC Synchronous Scenario with out BPM,
Go through this links...
JDBC Sync - RFC Sync Scenario without BPM
File - RFC - File without a BPM - Possible from SP 19.
JDBC-RFC-File
Re: jdbc-rfc synchronous
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
/people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
JDBC-RFC Scnario mapping problem
Thanks,
Satya Kumar
JDBC---RFC will Support Sync?????????

For File -- RFC-- File scenario want to remove sync/async bridge

For File -- RFC-- File scenario want to remove sync/async bridge
Can I work with File -- RFC-- File scenario without BPM
Regards

Hi-
Check this threads
RFC -> File without BPM
File - RFC - File without a BPM - Possible from SP 19.
File-To-RFC without using BPM

RFC Sender and RFC Receiver Sync Scenario . Help required.

Hi,
I need to make RFC Sender and RFC Receiver Sync Scenario.
Any docs/links for it.
Regards

Hi,
I have CRM (r/3) and DM (r/3)system.
Data from differnent tables of CRM system needs to go to
DM system different tables , data will be saved there and then return response back to CRM system.
For this I have given one RFC for CRM system
For this I have given one RFC for DM system
So I have to make Sync Outbound Interface
and Sync Inbound Interface.
So I think so no BPM is required.I am correct?
Adapter -- RFC Sender and RFC Receiver Adapter.
Regards
Edited by: Henry H on Jan 29, 2008 11:20 AM

(SOAP sender) --- XI ---- R/3 (RFC receiver) this sync scenario

Hi Experts,
Webservice(SOAP sender) < - > XI <--> R/3 (RFC receiver) this sync scenario tested with Infopath successfully.
I have given partner number,student object id are the two input fields(request) and i am getting student number as response. This scenario is working when i use MS infopath.
I have generated WSDL file embedded with below URL
http://xxxx.yyytec.passh.ed:7271/XISOAPAdapter/MessageServlet?channel=:Webservice_Sender_BS:GET_NUMBERS_Sender_CC&version=3.0;amp;Sender.Service=Webservice_Sender_BS;amp;Interface=urn%Apache
Sender business system: Webservice_Sender_BS
Sender CC: GET_NUMBERS_Sender_CC
Msg Interface: STU_GET_NUMBERS_Synch_MI
now we want to test from third party website, what are the things to be provided to the website developer to test the scenario.
the way i generated URL, is it correct?
if i provide above URL and generated WSDL in XI , is it enough for web developer to enter the input fields to RFC(r/3) via XI as webservice request and getting back response from RFC(r/3) to webservice via XI.
can you please advice if any body worked on this kind of scenario.
Thanks
Dhanush.

For the developer you have to provide WSDL file so that they know the input/output fields and write the code.
URL is correct.
Other informatino they required is Username and password of you PI system.
Gaurav Jain
Points if answer is helpful

Fiel to RFC sync Scenario

Similar Messages

Maybe you are looking for