Field Exits in ECC5.0

Hi,
In the new system ECC 5.0, the Field Exits implemented in the older system customer are discontinued.
Does any one know if there is a migration strategy for the Field Exits? Or how these should be re-implemented in the new system

Hi Rohit,
Ypu may need to start looking into <b>BADI</b> instead.
I think this is new SAP direction. Having said that field list still work for ECC 5.0.
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

Warning message in field exit

Hi All,
I'd the requirement of giving a warning message for transaction VA01 if user enters some specific order type.
So I'd created a field exit for AUART for this screen. But i am able to give error message only and found out that warning & info messages can't be given in a field exit.
Please help me out. Is there any way I can give a warning message in field exit or suggest some other sol. for it.
Thanks,
Manu

Hi,
Thanks f or your answers, but the issue is that i need to give this message as User enters the details on VA01 screen & presses enters.SO i can't use user exit like move_field_to_Vbak & others.
Also, using a FM to give pop up message will ultimately make use of statement CALL SCREEN which is not allowed in field exit, i also tried FMs which displays messages normally means not in pop up screen, but again through it also i can only give error messages.
Please suggets if there is any other option.
Thanks,
Manu Parihar

Error Message in Field Exit

Hi All,
We have a FM which throws an error message. When that is executed in report, it works fine and the error message is displayed.
We have implemented this FM in FIELD EXIT for PRCTR. But it is not throwing any message. We checked the data, it is fine.
Can any one know how to solve this??
Thanks,
Sreedhar

Also you need to check whether this is assigned to any program/screen. As you know it will only trigger in the attached program.
See the documentation of RSMODPRF program.
Regds
Manohar

Query on Field exits in ECC 6.0

Hi All,
We have implemented field exits in SAP R/3 4.6c and now we have upgraded to ECC 6.0.
I need to know the following information:
Are field exits obsolete in ECC6.0?
Can we create new field exits in ECC 6.0 ?
Going forward, what is the alternative technology/concept to be used - enhancement sports, BADIs etc for field validations(or instead of field exits)?
Regards
Shiva

Hi,
Though it is obsolete, SAP does not say dont you field exit. You can still use field exit. You can still create field exits.
Whatever is already existing will definitely work. Creating a field exit is much more simpler and easy than the BADIs or Enhancement points.
Yes you are right, going forward, you will have to use BADIs or Enhancement points.
Regards,
Subramanian

How to call an include in a field Exit?

Hi Guys,
              i am having a doubt ,How to call an Include in a field Exit function module.
            i wrote as "include zxx_incl." but if i wrote like this in my Field Exit i am getting a Suntax error
"Recursive INCLUDE nesting in program "ZFLDEXIT_INCL". It contains an
INCLUDE statement which calls itself or a previously read program
("ZFLDEXIT_INCL                           ").
'                 i am having other doubt while creating an include program does we need to write a 1st statement as include zxx-incl within the same include ZXX_incl? if not i am getting a syntaxt error.
thanks,
Gopi.

Yes, thats the problem.
Your include is named ZFLDEXIT_INCL and in the first line of that include you probbaly wrote
include ZFLDEXIT_INCL.
Delete that, includes don't need a reserved word like programs and reports

Field Exit with DYNP_VALUES_UPDATE

Hello, I am trying to develop a validation in a SAP transaction (XD01) to check some field values and if them are right then fill automatically the rest of the field in the screen, using a Function Modulo and the FM DYNP_VALUES_READ I am able to retrieve the field values correctly, my problem is when a try to fill the rest of the screen's fields with FM DYNP_VALUES_UPDATE it doesn't work. Does anybody have used this FM? is possible what I am trying to do?
Thanks in advice for your help.

Hi Fernando,
Using Field exit we can't populate multiple fileds, One filed exit is applicable for only one input filed.If you want to implement the
filed exit for multiple fileds you have to implement the one exit for one filed.
Regards,
Mahender Reddy

Error while activating field exit

hi all
while activating field exit iam getting error
like system is not configuted for field exit
solution is Set the abap/fieldexit parameter to YES in the system profile and restart your SAP system
then in which tcode i can set the parameter
thanks in advance

1)Login to R/3
2)Tcode RZ10
3)Select instance profile
4)click extended maintenance
5)change
6)Add parameter
7)Abap/fieldexit -> save and activate the changes.
Then restart you r/3 system.

Not getting field value in Input field of field exit

Hi all
I am using field exit for data element GWLDT in transaction code IE02. But in this field exit I am not getting the value entered in the field "Begin guarantee date(GWLDT)" in the INPUT field of field exit.How I can get the value in the INPUT field of field exit?
Regards
Deepak

Use this statement in source code.
output = input.

PR creation for 'F" in ME51N, ME52n, the cost center field exit getactivate

Dear Gurus,
We have a Cost center Field exit activation, meaning when a PR is generated, the system will validate only for his department cost center. Its working fine
The issue, when we create PR through ME51n or me52n for Acct Assign "F" here we are going to enter only Work order number and GL number, not cost center. Still this field exit has activation, here the same error message popup, which suppose not to be.
So in MM configuration, i have disabled Cost center field for acct assignment "F".
Now when i create a PR for F, for single account assignment, the system will alllow, but if i want to distribute the qty to different work order, the system goes for validation for cost center field exit.
How to resolve for multiple assignment, how to deactivate the Cost center field exit for this case, its woking fine of Single account assignment (after disable the cost center field for Account Assignment "F")
Please help me out or any way to do this?
Regards
RS
Edited by: RS on Sep 14, 2009 7:40 AM

Hi,
Cross check you have Cost Center field is Hidden for Account Assignment Category A (Asset) in t.code:OME9. Now change Cost Center field as Display for Account Assignment Category A and save.
Now create a new PO with Account Assignment Category A and find the difference how Cost Center appearing in your PO in “Account Assignment” TAB.
Regards,
Biju K

Creation of field exit in ECC

hi friends,
i am facing a problem while creating a field exit in ECC. I need to create the field exit on field vkorg and i have created using the program RSMODPERF and the system itself proposing the function module name as 'FIELD_EXIT_VKORG' and i have created the function as well. but when i try to assign program and screen to that field exit then one pop up is coming with three options one is field exit, second one is program, third one is screen. But in first option in f4 help only two options are there one is 0-9, and A-Z. If i select one of that and if i press save then error is coming saying ki FIELD_EXIT_VKORG_1 not exist like that. How to assign program and screen number for the same. Any help will be highly appreciated.
Thanks a lot.

check whether u have done the following stepd after coding the Function module..
After coding, activate the function. And back again to the transaction CMOD.
The Field Exit will be assigned but still in u2018Inactiveu2019 status and u2018Globalu2019 program
To make it useful for the specified transaction (program name and the screen number of the destination field), we have to assign the function by giving the u2018Checku2019 , and click u2018Assign prog./.screenu2019 , assign the u2018Program Nameu2019 and the u2018Screen numberu2019 and press u2018ENTERu2019. Then activate.

How to fetch values at runtime in field exit function module

Hi all,
I am creating a field exit for delivery date in Purchase requisition.
For that I need to capture Delivery Date and Sale Order entered in purchase requisition and pass this to Function module and validate this data.
I am using import and export parameters but it is giving runtime error.
please tell me how to solve it.
Regards,
Sunny

Hi,
There are other ways to access the purchase requisition related values..that is using field symbols..
pls check the below mentioned link:
Re: Pricing Routine : Can we get the VBAP Data in this pricing routine.(VOFM)
Identify the similar data fields for requisition.
Hope this wil help..
Sumit

Field Exit for Z Program

Hi Gurus,
I have created a Z program with a MARA-EAN11 data element field which is necessary to read MARA table and return its material code (MATNR) in a text field after ENTER key pressed.
It was created also a Field Exit called FIELD_EXIT_EAN11 and it is working fine in test mode (SE37), but when I try to trigger by ENTER key in my Z program, it is not being executed.
What Am I doing wrong?
Thanks,
Michel Khouri

Hi Max,
This programs already exits and now it is being implemented Bar Code functionality. The program will read the bar code and then call a routine to fill some fields automatically, as example: Material Code, Materia description, EAN and so on...
The idea is create a new screen (CALL Screen FM) to put those data.
That's the reason to use Field Exit after EAN field/ENTER Key actions.
Thanks again,
Michel Khouri

Error in activating Field exits

Hi...
At the time of activating field exits data element , I am getting the message as " System is not configured for
field exits " . In a default profile I also set the parameter abap/fieldexit = YES & restarts sap logon too.
Plz.. give me the solution ASAP
Thanks in advance
Deepa

Hi Deepa,
refer to this link
Field Exits
re: field exits
hope it helps..
Regareds!

Use of field exit for validation of KNTTP in ME51N

Hi All,
I've a client who is still running on SAP 4.6C. There is a requirement to validate the Account Assignment Field KNTTP based on the document type, and if the validation fails, to raise an error message. As there is no standard user exit that I've been able to find for this field, and we don't want to modify standard screens, I've created a field exit against the KNTTP field and generated the FM FIELD_EXIT_KNTTP, and activated it, but it doesn't work.
As this is the first Field Exit I've coded could someone please assist me with understanding the following: in the parameters list is the value of INPUT the value of, in this instance, the KNTTP field and also is it possible to read other screen data within this FM, for example, if the KNTTP value eq 9, can I read the BSART field of the current transaction, and if so, how do I reference it (BSART, EKKO-BSART, MEREQ_TOPLINE-BSART, parameter id BSA, etc)?
Any suggestions on how to debug the process would be greatly appreciated as well.
Any help would be greatly appreciated.
Regards,
Steve

Due to lack of assistance, we were unable to pursue this requirement - the users were not happy, but what can you do, huh!

How to write the code for IMPORT and export in Field exit

Hi,
Using the FB01 tcode with condition as document type (ZF) and company code
i want to substitute values should come in the next screen.
i am passin the document type and the company code in the FB01 initial screen (100) and added field exit for Cost centre.
if the Doc type ZF and company code is 0245 then the field exit shoul trigger and give the defaul cost centre value if it contain any cost centre valu it over write the existing if it is empty i will write the defauls cost centre value.
Thanks & Regards,
Nelsons......

Hi,
As i have understood, if ur doc type is ZF and company code is 0245, then you want to pass the value to cost centre field in next screen.
You can use program RSMODPRF. here enter the data element of cost centre field and assign the screen no and program name (for FI docs prg name would be SAPMF05A).
After assigning program and screen no , Create the function module where u have to write an 'if' statement for assigning value to cost centre (i.e export field in FM)
the values for company code and document type can be fetched from their respective parameter ids i.e. BUK and BAR.
Regards,
Seema Jaisinghani

Field Exits in ECC5.0

Similar Messages

Maybe you are looking for