Figure out which CPU has been applied...

Hello all, I am on 10.2.0.4. I wanted to know if there is a way to by looking at below info that i have cpu JAN 2010 applied ??? As I was asked today about it and All i could do it...down the cpujan2010 patch and unziped that and found the patch number in it(for instance Patch 9173253 ).
I tried searching metalink with Patch 9173253, but no hits....so is there a way in opatch utility to figure out what patchs are applied, in terms of quaterly CPU...Thank
[oracle@linux01 admin]$ opatch lsinventory
Invoking OPatch 10.2.0.4.2
Oracle Interim Patch Installer version 10.2.0.4.2
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /u01/app/oracle/10g
Central Inventory : /u01/app/oracle/oraInventory
   from           : /etc/oraInst.loc
OPatch version    : 10.2.0.4.2
OUI version       : 10.2.0.4.0
OUI location      : /u01/app/oracle/10g/oui
Log file location : /u01/app/oracle/10g/cfgtoollogs/opatch/opatch2010-02-25_18-30-33PM.log
Lsinventory Output file location : /u01/app/oracle/10g/cfgtoollogs/opatch/lsinv/lsinventory2010-02-25_18-30-33PM.txt
Installed Top-level Products (2):
Oracle Database 10g                                                  10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 3                            10.2.0.4.0
There are 2 products installed in this Oracle Home.
Interim patches (35) :
Patch 9173253      : applied on Thu Feb 25 18:22:27 CST 2010
   Created on 2 Dec 2009, 02:21:37 hrs PST8PDT
   Bugs fixed:
     9173253
Patch 9173248      : applied on Thu Feb 25 18:22:21 CST 2010
   Created on 2 Dec 2009, 02:21:15 hrs PST8PDT
   Bugs fixed:
     9173248
Patch 9173244      : applied on Thu Feb 25 18:22:16 CST 2010
   Created on 2 Dec 2009, 02:20:05 hrs PST8PDT
   Bugs fixed:
     9173244
Patch 9119226      : applied on Thu Feb 25 18:22:03 CST 2010
   Created on 5 Jan 2010, 22:40:51 hrs PST8PDT
   Bugs fixed:
     8534387, 8290506, 9119226, 7375644, 8836308, 7150470, 7592346
Patch 8836686      : applied on Wed Feb 24 19:12:30 CST 2010
   Created on 31 Aug 2009, 13:24:31 hrs PST8PDT
   Bugs fixed:
     8836686Edited by: user097815 on Feb 25, 2010 7:24 PM

Another way to find what you are looking for is to possibly try the following:
SELECT * FROM registry$history
You will find details of whats been applied. This obviously will be from an instance perspective.

Similar Messages

How to find out which GR has been invoiced?

Hello,
I am working on one scenario in which I am making a sales order through which automatic Purchase order is getting generated. I am doing a MIGO(GR) for lesser quantity on this PO. lets say I am creating 4 GRs of 10 quantity for a PO of 50. Now, I am making direct invoice for this through VF01 with reference to sales order. An invoice of 40 will be created.
Now, I am doing creating one more GR of 10 for the rest of the amount. I have 5 GR's now.
How can I get to know which GR has been invoiced (table relation) and which is yet to be invoiced?

Amrish,
RSEG is the "Document Item: Incoming Invoice" table. In this table, Look for the field LFBNR , LFGJA, LFPOS.
LFBNR - Refernced GR Number
LFGJA - Year
LFPOS - Ref Doc Item
Hope this helps
Vinodh Balakrishnan

What information can I use to find out which software has been downloaded for my company?

Hello Adobe forums! I hope this is the right spot to put these questions.
This is the situation:
I work for a very small printing outfit in a very small town in the middle of nowhere, Canada.
Everybody that worked for the company that was involved with adobe in the past has now moved on, except people that can't help with this issue.
I have managed to slueth some information from some people here but nothing concrete.
Anyways, so far that I know that this company subscribed to some sort of Adobe subscription service that enabled them to upgrade as need be for an annual fee. At least this is what i've been told.
We have both a PC and a Mac version of Adobe Design Premium CS3, working on their respective computers. The reason I need to know whats going on is that the PC with CS3 is about to go kaput - So I've got a new PC. Now I need to transfer the design suite from one computer to another. I know I can have active two installations of the design suite per purchase, but I also know I can deactivate one activation and reactive it again elsewhere. Thats the option I want to pursue.
I have no idea what usernames were used to download these products, no idea which people in the company's history were responsible for acquiring these suites. I have a list of names and emails, and also I do beleive the company credit card has remained the same for many years, and so I have that as well.
I also still have the working and legitimate copies of Design Premium CS3. I do not have serial numbers for these programs because I dont have access to the emails that purchased them. I did however yesterday register the photoshop CS3 to the current email address I use now for adobe.com (although I haven't seen anything reflected in my account just yet - I understand it takes 24-48 hours for that to show up) So that I believe should at least be one step towards proving to adobe I exist and that my design suite is genuine.
So basically I'm looking for two things. One, I need to find out which account we used to acquire the software (With email addresses and a CC# should will I be able to find this?) and two, I need the serial number and a link to download CS3 Design Premium, which I'd imagine is dependant on the first objective.
(An interesting side note: in the Adobe folder on the dying PC there is an unistalled zip file containing CS4 Design Premium. I know the PC wont support CS4, so maybe thats why its not installed. Interesting that it is on there - is there any way i can tell if it was downloaded from a subscription service by jsut looking at the .7s zip file?)
Thanks for any help anyone can provide! Any further info I can give I will glady hand out, cheers!

Two thoughts:
(1)     It is possible that your Adobe software was the result of belonging to a now-discontinued Adobe Print Service Provider program where for a certain annual membership fee, print service providers were provided with (a) both a Windows and Macintosh license to the Adobe print-oriented software products (such as InDesign, Illustrator, Photoshop, and Acrobat) and (b) special direct product support as well as the ability to put your name on Adobe's website as a member of this program. The program ended over a year ago if I remember correctly.
(2)     You may wish to contact Adobe Customer Support (not Technical Support) and see if they can track down any and all licenses associated with your company. If you have the names of the former employees who worked with this software, it would be helpful. Likewise, if you were a member of the discontinued Adobe Print Service Provider program, you may have some options for upgrading/updating the software you have.
Unfortunately, you cannot get any more definitive information about your situation on these forums.
Good luck.
          - Dov

How to find out what brush has been applied to a path...

Reading the scripting documentation I didn't find the way to access the information about a possible brush applied to a pathItem. Is there a way to get the information using JavaScript - surely it has been store somewhere? I'd like to access the information because I need to apply the original brush to a new path the script generates. Cheers!
I don't feel like cracking open the SDK just yet. ;)
Best regards,
Antti Myöhänen

Hi Jayesh,
As a starting point, you could use FM BBP_PD_PO_GETDETAIL and BBP_PD_CONF_GETDETAIL.
All data are stored in tables displayed in transaction bbp_pd.
Kind regards,
Yann

Need to find all clips to which a certain filter has been applied

Other than going through the entire timeline and opening each of my clips in the viewer, is there a way to determine all the clips on the timeline to which a certain filter has been applied?
Thanks,
John Link

Not really John, at least not that I can think of off the top of my head ... but you can make the task easier by changing your Playhead Sync mode to Open (View menu > Playhead Sync > Open) that way you can zip through the timeline and as the playhead moves from clip to clip it will automatically open the clip under the playhead into the Viewer window. If you set the Viewer window so that it is showing the Filters tab then you can pretty easily see at a glance whether a specific filter is applied on a specific clip.
Or, if there are no other filters applied, then you can turn on the timeline's Clip Keyframe overlays (toggle on/off with Option T) ... wherever you see a green line displayed then you know that a filter is applied.

Determine which security patch or Critical patch update has been applied

Hi,
Anyone know how to determine which security patch or Critical patch update has been applied to the database? For Unix and also Win 2000k database server..
Thank You

Use the lsinventory command of opatch (Oracle's patch
installation tool) to list the patches installed.
If you have Perl and opatch installed, this is simply
a matter of typing:
opatch lsinventory
from the command line.
For further information on opatch, see metalink note
293369.1
Hope this helps.
Kailash.

How to find original document for which settlement has been carried out.

Hello Friends,
As a process of period end, we have executed the automatic settlement for assets under construction for an internal order through KO8G.
After completing the run system has posted a document successfully.
When I want to check the original document for posted document through FB03, through Environment  Document Environment  Original document. System is showing the same settlement document rather than the original document.
Can any one explain me how to check the original document for which settlement has been carried out.
Regards,
RS

"Original document" means from where the document originated. Means for eg MM invoice will be original document for FI invoice. Hoever for settlement document, Settlement process it self is the origin for posting. This way, You cannt trace back the Fi postings which got settled. You need to run line item report for the object and analyse the Fi postings and corresponding Settlement postings

How do I tell what version (update / release level) of version 6 has been applied to my system?

Question
How do I tell what version (update / release level) of version 6 has been applied to my system? I have applied several different release levels to version 6 of FF but all the about feature tells me is Version 6.0. no version! This seems to be a change in the way updates are handled. Is that a bending because of the speed of which you're pushing out updates and new releases?
contact me if you need something more
''deleted email address''

@cchur <br />
Nope, I never used Chrome, but I did try Chromium on my Windows desktop PC for a few months last year. I got tired of the Google updater. exe running all the time and Google's method of doing updates, so it's gone. I do have Chromium on my Linux EeePC since last summer, but Ubuntu handles all updates and gives the user the capability to accept or deny, any or all updates - much more to my liking, similar to the way Mozilla does it. I don't like software developers forcing to update until I am ready to proceed.
There's a lot more about this new Fast Release system, than just the lack of visible version numbers, that I don't like. The Nightly, Aurora, Beta, & Release sequence is dumb with the way it changes the version numbers. I prefer installing (for instance) what will become version 7 and have that installation progress thru the 4 stages, instead. Now it's like Nightly going from 7 to 8, Aurora going from 6 to 7, and Beta doing - hell, I won't know if it becomes a Release or if it just dies and I will have to install the Release version myself. ''Quite honestly I don't care, because I don't think this new "system" is going to last too long without major modifications. Too damn many users are so pissed off, that when Firefox starts losing large numbers of users, Chrome keeps growing and eventually passes Firefox in number of users and market share of usage - Mozilla will wake up and see the "light" and change back to the way things used to be done, to a certain extent.''
I also dislike the UI changes in 4/5/6/7 enough that I am still using Firefox 3.6 for almost everything and Firefox 2.0.0.20 for the rest. I have been setting my toolbars up almost like Mozilla did for Firefox 4, since Firefox '''0.7''' in 2003 and I haven't come up with a workable combination of mods and extensions to configure Firefox to look and work the way I have been doing for almost 8 years now.

How can if figure out which contacts are in both iCloud and on my Mac?

I keep contacts on my Mac and on iCloud. I want to see which ones are in both databases. Some of them automatically "linked" and others did not. The search for showing contacts that are both a member of "my Mac" and a member of "iCloud" does not seem to work. I also want to figure out which contacts are not in a group and this has been difficult as well.

If you change your preferences so that the defaul is not iCloud then you get two sections like this:
When I don't have it set to On My Mac then I only get one section because all of my cards are in the cloud.

HT4943 Newsstand shows a 1 but I can't figure out which magazine needs updating...help!

Newsstand shows a "1" but I can't figure out which magazine needs updating. Help?

I have no idea why you are doing what you are doing so I will make a couple of related points.
1. Put your table partition, and its indexes, into a single tablespace and leave them there. If you do not understand why there has been volumes written on the subject by everyone from Tom Kyte, Jonathan Lewis, Richard Foote, etc. Essentially the entire membership of the Oak Table Network has weighed in on this one.
2. If you are going to create partitioned indexes leverage the built-in capabilities in DBMS_PCLXUTIL.
http://www.morganslibrary.org/reference/dbms_pclxutil.html

Request timed out because there has been no reply from the server in 600000

Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> 
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winform

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

Request timed out because there has been no reply from the server

Hi,
I am using "Embedded report application server 11.5".
When i am going to launch report with the help of above mentioned server i am getting "Request timed out because there has been no reply from the server for more than 600,000 milliseconds" error.I have already huge data for passed parameter
Steps that i followed:
1)I have set unlimited jobs in server.
2)In registry entry i have set 10,00,000 miliseconds insted of 6,00,000 miliseconds.
Can anybudy please provide me some solution for this.
Regards
Vishal

See here if it's still an issue
Re: which registry setting to change for long running reports

Sale orders for which invoice has been created

is there any table in sd module from which we can find out the list of all sales order for which invoice has been created.

Hi
Kindly Table VBFA.It is sales document flow table containing data from the begining of sales order till the invoice.
VBTYP_N = 'M' invoice
Thanks
Subha

I'm trying to install OEM SR 2.1: Windows 95B in Qemu... How do I figure out which brand of CD-ROM drive Qemu emulates since I have three different drive specific boot disks...?

I'm trying to install OEM SR 2.1: Windows 95B in Qemu... How do I figure out which brand of CD-ROM drive Qemu emulates since I have three different drive specific boot disks...?

Not exactly...; all MS produced Win9X/ME install CDs are ISO-9660 & maybe even Joliet too... The really confusing part is that not all Windows 98 SE full install CDs are even bootable in the first place (they tend to only ship one if the PC is capable of booting directly from its optical drive...; the vast majority of PCs have to use the chain loading method due to buggy, poorly written, outdated BIOSes...; etc.). OEM SR 2.1/Windows 95B is really quite special & innovative for its time in that it was the first Service Release of Windows 95 to support larger HDs via FAT32 which back then was still brand new: i.e.: exciting technology & it still has proven to be quite useful & versatile since most flash memory storage devices come pre-formatted FAT32.
There's also a hidden X:\Usbsupp folder on the CD that contains the MS USB 1.1 supplement patches/upgrader: a common mis-nomer is that you don't need to install it unless your PC has USB 1.1 ports. Even without USB 1.1 ports the upgrades to C:\Windows\system make it a lot less buggy, more secure & stable. For anyone else that enjoys emulating OEM SR 2.1 there's also a great unofficial SP 1 for it which has so many useful patches in it I'm considering integrating it into all of my install CDs...
Unfortunately I've found that getting it to run decently requires tracking down a bevy of essential but according to MS's not releasing them in patch form optional DLL upgrades... I guess not all machines are that unreliable but better to have them...; just in case you encounter a PC with a buggy BIOS that has hardware coniptions and/or ACPI/APM bugs.

Detecting if Auto Tone has been applied?

An Any Filter user would like to find images for which Auto Tone has been applied.
Is there any way for a plugin using the SDK APIs to detect this? Looking closely at photo:getDevelopSettings(), it appears that Auto Tone adjusts all the individual develop settings but doesn't leave any indication that it was invoked, as opposed to the user changing those settings individually. The develop history records this, but there isn't any API for accessing the history, and I don't think accessing the catalog via SQL is viable for my use case.

Hi John,
I can't think of a single thing that would be reasonable enough to actually do - sorry.
I mean, I've done plugins which rely on a shadow-copy of the catalog created upon startup, but it's admittedly tacky.
e.g. User instructions:
* Make a copy of the catalog before starting up
* then don't auto-tone anything before doing the search (or restart Lightroom..).
(then you can rely on edit-history for the auto-tone setting).
Obviously you could automate that somewhat - if user selects "Auto Tone" in their filter, then you write a startup batch file and have user startup using it before searching, etc..
(or I suppose you could just find the most recent catalog in the catalog backup folder...)
PS - SQLiteroom has an option to make the shadow copy upon startup, which I use in the DevHistoryEditor plugin.
I mean #2, you could auto-tone a virtual copy then compare settings to the original - odds are very low user would come up with exact same settings as auto-toner (I know, yuck..). then there's the vcopies to dispose of..
Will let you know if I think of anything slicker.
Cheers,
Rob

Figure out which CPU has been applied...

Similar Messages

Maybe you are looking for