File Adapter and Determining File Size
I have added a Header Variable to my Receive activity so that I can capture the size of the file coming in. I've also added a "size" element to the InboundFileHeader.wsdl.
I can't figure out how to populate that header variable! I was hoping it would just be populated automatically since I've added the element to the wsdl but no such luck, just null variables.
Thanks.
865094 wrote:
... if we have File protocol available inside proxy, where do we need File adapter then?The FileAdapter (JCA Resource) can be also used by BPEL/Mediator... I would always first consider using File protocol for OSB, unless there's some feature in the JCA adatper that may be interesting for a particular use case (like native format builder for example)...
Cheers,
Vlad
Similar Messages
-
hi experts, i have a problem:
i have configured sender file adapter to send 4mb file from FTP server, so when i upload file to FTP, file adapter don't upload it, file just stay in folder.
I have tried to upload small file, is about 16kb, so it works fine, without any errors
I checked communication channel log in RWB, there are not any errors, all leds are green.
So i don't know how to upload 4mb file, also i checked all rights and permissions for file and user, they all have admin rights - "777".
Can anybody give me some suggestion or solution?
Thanks all for reply.Hi,
Try to increase your server parameters as below and try ....then you would be able to process large data
u2022 UME Parameters : May be we need to look into the pool size and poolmax wait parameters - UME recommended parameters (like: poolmaxsize=50, poolmaxwait=60000)
u2022 Tuning Parameters: May be we need to look/define the Message Size Limit u201Clike: EO_MSG_SIZE_LIMIT = 0000100u201D under tuning category
u2022 ICM Parameters: May be we need to consider ICM parameters (ex: icm/conn_timeout = 900000. icm/HTTP/max_request_size_KB = 2097152)
Regards,
Naveen -
Sender File adapter and duplicate file processing
If I set the sender file adapter to delete or archive and when a file gets picked up and processed, this file will not get deleted/archived unless it was successfully processed. However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine. Since there's automatic retry, we have the potential for duplicate processing as in addition to the retry, the file is still continously polling for this file. In other words, how do we stop this duplicate file processing?
Thanks.Hi Bevan,
However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine.
your file wont get deleted unless adapter engine sucesfull pickups. if does not picked up at adapter engine then is not stored in adapter engine . if it reached Intergation Server and failed their then file would be deleted.
please let me know if you haveany questions
please reward points
Regards
Sreeram.G.Reddy -
File Adapter and Third party system
Hi,
I am new to XI and implementing a simple scenario.
In SLD- I have 3rd paty software component and product.
3rd party technical system: using my pc - For host name I am using my machine name.
Scenario: Using file adapter transform csv file to xml.
File resides on my machine. I have configured file adapter inbound and outbound. Integration Dir & Rep objects are all activated.
But nothing happens, cannot see any message in Messgae monitoring..
Any help would be great.. Is my technical system setup wrong?
thankschk whether the folder in your m/c where the CSV file resides is shared and has appropriate access. Also you need to specify your m/c IP with fwd slashes, e.g) //<Ipaddress>/foldername
configuring your m/c as a Third Party system in SLD is fine.
If you think ur SLD settings are not correct, you can define your file adapter commn. channel in a Business Service(which does not require an SLD entry) and check whether it works.
Thanks
Saravana -
I am having a sender file adapter and is using NFS as the Transport Protocol. This channel is throwing an error that " directory does not exist". What can be the possible solutions for this problem?
When I had previously checked this , it was working fine but now its throwing this errorr.Hi Neelansha,
If you select the transport protocol for NFS, Mention the Directory name for where we can get data.
and check the communication channel monitor for file sender, it will shows the clear error.
Regards,
Sateesh -
File Adapter-handling erroneous files and let channel continue to poll file
Hello,
Even tough there is not an out-of-the-box solution in PI, I'd like to hear your suggestions. When having a file sender communication channel to pick and send files, there are cases where we get errors at the adapter level. These errors are generally due to errors in the file, which will, for example, lead to conversion errors. When this happens, this communication channel will present us an error and will continuously try to pick the erroneous file till we fix the error in that file. Now imagine the situation where in the same folder you have another 1000 files to be picked up and these are all right. Despite this fact, the communication channel will continue to be in an error state till it can process the first file. My question is, what's your generic and standard solution to automatically place this erroneous file in an erroneous folder directory enabling the communication channel to process the other 1000 files?
Thank you for your suggestions.
Goncalo Mouro VazHi,
As said above...that option need to be utilised in case of error files....
search SDN if need more details...and coming to the second u mentioned that if 1000 files are there for processing and waiting...
if file adapter criteria for processing the file matches and if file is correct then those files will get processed inspite of one error file also...
Hope this clears your queries...
HTH
Rajesh -
File Adapter : read XML file with data validation and file rejection ?
Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens -
How to generate .pdx file using File Adapter and FTP Adapter
Hi,
is it possible to genearate .pdx file using oracle ESB Adapters(File Adapter and FTP adapter).
Can you anyone guide me.
Thanks,
Raj.hi,
regarding report, there is a dedicated report forum. you should post there.
but answer for your question is form is nothing to do with the pdf generation. you can call the report from the as usual.
In the report you should set the properties like
destype to 'file'
desname to 'path with file name'
desformat to 'pdf' -
Difference between File adapter and FTP adapter
hi,
I would like to know what is the difference between File adapter and FTP adapter
thanks
YatanBoth file and ftp adapters are non-concurrent jca adaps, however we go for file adapters mostly when you have files on your local environment and do not need to wait for someone to FTP the files on a timely basis. In case of FTP Adapter, we would need an FTP Server, a remote location with access where in files pitch in for polling.
Also, File adapter is dependent on the local folder and OS, however FTP adapter is dependent on the local as well as the remote file system/OS/folder permissions/user access. -
File adapter and clustered application
Hi !
I have a question about how to use correctly file adpter at sca application in clustered server. My application very simple. Folder with xml files. Composite application - file adapter read folder with mask *.xml. Some times file adapter read one file twice. How I can set lock file when read one server from folder ?
Edited by: user5427713 on Nov 26, 2012 5:38 AMYou need to setup the File Adapter for high availability to ensure proper functioning in a clustered environment. Check out the details here in section 5.9.2.2
http://docs.oracle.com/cd/E12839_01/core.1111/e10106/ha_soa.htm#CHDJFDAI
In summary you will need following:
1. A shared filesystem for the managed servers
2. Same value for control directory in connection factories
3. Use eis/HAFileAdapter instead of eis/FileAdapter as connection factory in JCA file. -
How can I download music files (MP3) and video files (AVI) to iPod Nano?
I just want to download music files (MP3) and video files (AVI) to my son's iPod Nano and iTunes has all menus grayed out, can't get on Apple support site to upload diagnostics file. Driving me mad - should be simple... Please help!!! Dump of diagnostics below:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
INTEL_ DG41RQ__
iTunes 11.1.3.8
QuickTime 7.2
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B9B00CB27BC0
Current user is an administrator.
The current local date and time is 2013-12-22 23:15:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Core Media is not supported. (16002)
Video Display Information
ATI RADEON XPRESS 200 Series
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {E4F794BB-151F-490C-8AC0-1EDB6DA3718A}
Description: D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2) - Packet Scheduler Miniport
IP Address: 192.168.5.104
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.5.1
DHCP Enabled: Yes
DHCP Server: 192.168.5.1
Lease Obtained: Sun Dec 22 21:35:11 2013
Lease Expires: Mon Dec 23 21:35:11 2013
DNS Servers: 91.216.105.75
216.93.191.228
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: LITE-ON DVDRW SHW-160P6S, Rev PRS2
Drive is empty.
**** Device Connectivity Tests ****
iPodService 11.1.3.8 is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller
Connected Device Information:
IPOD (K:\), iPod nano (7th Generation) running firmware version 1.0.2
Serial Number: DCYK27TGF0GT
Bus Speed: 61440
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Hi fkerrin!
In case you haven’t already tried this process before, here is an article for you about syncing media to the iPod:
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
File adapter with empty files!
Hi guys,
My scenario is: File -> XI (BPM) -> JDBC
Under BPM I have a fork with two parallel receivers correlated and two sender file adapters for that. Those senders also have file conversion (.seq file to XML).
My problem is: in case of files coming empty, is it possible that senders file adapter generates error during file conversion? And/or generates errors during correlations?
If so, "I wouldnt like", because after receive these two files I have a switch to check if the file(s) coming empty and a control step to terminate the process in case of true. But this only works if no errors have occurred on the earlier steps!
At this moment I cant test it, so Im asking If anyone has faced an issue like this one?
Thanks in advance,
Ricardo.Hi,
Which SP are you on?
Before Sp19 on XI 3.0 and SP10 on Pi, Empty Files are ignored by XI. The file adapter picks the file and if it is a empty file ( a zero byets file ) the file does not create a message at all for the file.
From Sp19, the file adapter has options that allow you to decide how to process the empty file. You can create an error message etc.
Regards
Bhavesh -
File Adapter not processing Files which has COMMA in it
Hi Experts,
I am working on Project in SOA 11.1.1.6.
I am trying to process a file which has comma in it. for eg - XXXXXXX-XX_XX_XXX11,99.pdf
I am picking the file using file adapter from SOURCE directory and using another file adapter to WRITE to destination directory. Polling processing is working fine.
I am picking the file from SOURCE directory as ATTACHMENT and WRITING to DESTINATION folder through File Adapter
While doing file WRITE its failing. While reading the file the values of Content Type, Character Set and Encoding are NULL for the ATTACHMENT as they are optional properties.
The error I am getting while File WRITE is
<remoteFault>
<part name="summary">
<summary>java.lang.RuntimeException: Failed to decode properties string att.encoding=null,att.charset=null,att.contentId=AReadFile/XXXXXXXX_XX_XXX11,99.pdf_1352184009640,att.contentType=null,att.partName=attach</summary>
</part>
<part name="detail">
<detail>1</detail>
</part>
</remoteFault>Comma is usually treated as a separator/delimiter and hence it is not really common to have comma in filename. I think because of this reason File adapter does not support it (have to cross-verify). If you really have a requirement to read/write files with comma in filename then better log a SR with Oracle support.
Regards,
Anuj -
FILE ADAPTER NOT READING FILE.
HI, GUYS.
I'M USING A FILE ADAPTER TO READ A FILE THAT HAVE 4 REGISTERS AND EACH REGISTER ONLY HAS ONE FIELD THAT IS NUMBER TYPE.
I CREATE THE FILE ADAPTER, AND I LET BPEL TO CREATE THE SCHEMA. THE IDE CALLS THES FIELD "C1". I ALSO CONFIGURE THAT THE FILE THAT MUST RAD IS THE PATTERN "*.TXT" AND EVERY 5 SECONDS.
THEN A CREATE A RECEIVE ACTIVITY THAT RECEIVES WHAT WAS READ FROM THE FILE ADAPTER IN A VARIABLE.
THEN I CREATE AN ASSIGN ACTIVITY AND I ASSIGN THE VALUE FROM THE RECEIVE ACTIVITY VARIABLE TO A NUMBER VARIABLE THAT IS THE INPUT OF A WEB SERVICE.
THEN I DEPLOY THE BPEL, AND I INITIATE IT, BUT I GOT AN ERROR THAT SAYS THAT THE FIELD "C1" IS EMPTY. SO LOOKS LIKE THE FILE ADAPTER IS NOT READING THE FILE. I WOULD THANK ANY HELP THAT YOU CAN BRING ME.caps off
You're sure the interface of the fileadapter (client partnerlink) is the same as your data-file which needs to be picked up?
can you paste the content of the file and the content of the xsd of the process. -
File adapter picking up files with wrong content
Hello, We configured a file adapter to read *.xml files. We also defined the xsd for the files. We expected that the adapter would only pick up files that conform to the xsd. However we found that all *.xml files (even renamed jpeg's) are read. Is this intended behaviour? Or did we miss some configuration setting?
RichardA short follow-up:
To make matters worse. If I take a completely different file (like the jpeg) and rename it .xml it gets picked up by the file adpater but there is no audit trail of the BPEL process instance. The file is not archived either, so it's completely gone! If I just change one of the elements the file is read and archived. I can also have the file adapter write the file with the wrong content.
I found a reference to a bug. (bug 5926809 or SR 6327165.994) is this related, is it solved?
Richard
Maybe you are looking for
-
When previewing images by clicking on the thumbnail in an Event for example, I've been finding that many images preview in a 'zoomed in' way so only a small part of the photos is previewed in a highly magnified view. Initially I could find no cause.
-
Data acquisition and waveform graph plot
Dear All My signal is out put of current transformer which is 2v dc. I succesfully configure usb 1208fs with labview8.2. Now I want to plot my input signal on the waveform graph in frequency vs amplitude(db). Can any one guide me how can i plot my da
-
Trying to scan a photo into iPhoto
I have iPhoto 6.0.6. I cannot import a photo from my HP scanner directly into iPhoto. I must open Photoshop first, then import into Photoshop and then put on desktop, and then drag into iPhoto. I have looked into Applications -> Image Capture, and it
-
Numbers functions lost...
Please, do anyone know if it is possible in Numbers 3.01 that when I have to type similar texts in cells of the same column, numbers could repeat the text after typing the first letters or suggest similar words, like It used to be on Numbers 9, Excel
-
The phone cannot be synced. the required file can not be found
I suddenly can not sync my iPhone 5 "The phone "..." cannot be synced. the required file can not be found." What do I do about this?