File Adapter dynamic configuration

Hi,
I would like to know how to configure location,polling frequency, file name dynamically at runtime.?
Is there any possibility to read configuration/property file at time?
Regards,
Govind

Which SOA Suite Version you are using ? You can change the directory and file details. Pls refer Re: Get File name using File Adapter Hope that will help you.

Similar Messages

  • File adapter dynamic configuration - Multiple filenames

    Hi
    Can anyone explaing the following.
    We are using the sender file adaper to pick up files from an ftp location. The dynamic config is used to store the filename.
    We are getting 1 PI message per file, but the dynamic config in SXMB_MONI is sometimes showing multiple filenames for one message.
    This makes it impossible to get the correct filename and do something usefull with it:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">xxxxxxxx1.PDF</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">xxxxxxxx2.PDF</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">xxxxxxxx3.PDF</SAP:Record>
      </SAP:DynamicConfiguration>
    Kind regards
    Thierry Boeve

    Hi.
    Pls. Check the following SAP Note.
    https://websmp230.sap-ag.de/sap%28bD1lcyZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1078455
    It will be help you.
    Regards

  • Configure Sender File adapter dynamically

    Hi,
    I need to configure the sender file adapter dynamically. Ex: I will be providing the src dir , file name etc dynamically. I think this is not possible using module because module gets executed after file is picked (in my case file dir and file names need to be determined dynamically). I even don't won't to use directory API for craeting my file sender comm channel. Is there any other way to achive this.
    Regards,
    Rakesh

    Hi Rakesh,
         what is the Operating system of the PI server? Could you please kindly explain what conditions determine filename and source directory? I do not think there is anyway you can determine src file and dir names dynamically in PI.
    Here is what you can try.
    PI server is on windows system u need batch file. If its on unix or Linux you need scripts. Now what you have to do is place all files in a directory. Here the script/batch file will run continuously in background. Once it gets files it will rename files based on file content or file name then move them in different directories as per your conditions. your interface must have multiple communication channels and sender agreement (with diffrent parties) which will pick up those files from these directories.
    The name of directories will be fixed in each channel.
    regards
    Anupam

  • File Adapter: Dynamic file name

    Hello,
    I would like to use a filename like this:
    Name.<DOCNUM>.Direction.<Timestamp>
    For DOCNUM I use variable substitution. Works fine.
    For <Timestamp> I need a different format as the timestamp function
    in file adapter create. So I try to set up my timestamp in mapping like
    dynamic file name:
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Timestamp");
    conf.put(key1, a);
    Input a is date function which creates my desired timestamp format. In file adapter I try this:
    Name.%DOCNUM%.Direction.%Timestamp%
    or
    Name.%DOCNUM%.Direction.Timestamp
    or
    Timestamp
    all doesn't work for Timestamp.
    So is there a possibility to configure a dynamic filename like this???
    Is there a possibility to access dynamic configuration variables in dynamic filename except
    the known for filename and directory??
    thanks
    chris
    Edited by: Christian Riekenberg on Mar 10, 2009 4:02 PM
    Edited by: Christian Riekenberg on Mar 10, 2009 4:05 PM

    your file name needs to be
    Name.<DOCNUM>.Direction.<Timestamp>
    dont use variable substitution. use only dynamic configuration and set the file name
    introduce a logic that will create the string
    Name.<DOCNUM>.Direction.<Timestamp>
    eg. String filename = "Name" + var_docnum + "Direction" + var_timestamp;
    then use the dynamic conf code to set the file name and use adapter specific properties in you adapter to retrieve it.
    Ref:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

  • Proxy to file using dynamic configuration

    Hi Frnds,
    I  have a scenario ABAP_Proxy-XI-File, here in the proxy I am getting a pdf file with xml as attachment now I need to save the pdf file to the target folder with the name availble in one of the fields of attached xml file.
    I have used Adapter specific attributes option for filename substitution but getting the follwoing error:
    Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header
    Please anyone can help me in overcoming this issue.
    Regards
    shiva

    U have a limitation here. At XI u can read only 1 file (pdf or xml). Bcoz receiver file adapter will not support attachment. pdf is required bcoz u need to transfer it to receiver. Xml is also required bcoz the directory name is inside that xml
    The workaround could be creating an adpater module that passes the directory name as well. U should send pdf file with xml as attachment.
    If u have the dir name, then the dynamic configuration code should be like this
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
    conf.put(key,MappedDirectoryName);
    This MappedDirectoryName should be the name passed through payload. The receiver file communiation channel must have dummy dir name
    Regards,
    Prateek

  • Outbound File Adaper : Dynamic configuration of FileSize and number of msg

    I want to configure dynamically following parameters of Outbound file adapter
    1) Number of Message equals
    2)Elapsed time exceeds
    3)File size exceeds
    If we set all those parameter at designtime then automatically it stored at adapter.wsdl file but how can I change those parameter at runtime.
    Let me know regarding this.
    Thanks in Advance

    Noway.
    Only statically. Stop adapter, change in manually and restart adapter.
    Or write your own adapter in java.
    Or create several adapters with different configuration and pick appropriate adapter dynamically.

  • MDM Adapter dynamic configuration

    Hi All,
    The scenario is, PI picks up a file from ECC using sender File adapter and sends it to different MDM ports using the Receiver MDM adapter.
    The only difference in the different receiver MDM communication channels sending the data to different ports is the
    MDM Access Parameters-->Port Code.
    So we have decided to use Dynamic Configuration of the MDM communication Channel to avoid using many communication channels.
    Please help with the steps/ blogs that I can follow to do the above
    Thanks,
    NehaSingh

    Hi,
    but there is no dynamic config in MDM adapter - at least in 7.1 
    Regards,
    Michal Krawczyk

  • Sender File Adapter - Dynamic Filename?

    Dear All,
    I have a simple requirement to retrieve a file named "XXX_ddmmyy" from an FTP site. The FTP site administrator will place a new file everyday. The date is part of the filename.
    I can find a lot of information on how to set the Filename for a "Receiver File Adapter", but none about dynamically setting of the filename for a "Sender File Adapter".
    Can you help please?
    Kind Regards
    Farshad

    Hi,
    You have mentioned over here that the requirement is to get the file "XXX_ddmmyy" from an FTP site.
    Is that site strictly for keeping files related to your requirement only or lot of other files are also being placed???
    If its strictly related to your requirement then you can use the filename "*.extension" and set the processing mode as "delete" so that once the File Adapter picks the file it will be automatically deleted.
    But here disadvantage is that the file wont be no longer present in FTP site once it is picked by File adapter.
    Thanks,
    Lekshmi.

  • Receiver File Adapter - Dynamic FTP Server Address

    Hi,  I would like to pass the FTP Server address to the Receiver File Adapter as an parameter.  Is this possible and if so what Name Space / Parametr Names add to the Product to define these values.
    Thanks
    Andre

    Hi Andre,
    If you have your server as a part of your payload, thendynamic file server generation concept can be done is as follows. 
    In your server name field. just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    If you have any clarifications, do get back,
    Regards,
    Bhavesh

  • File Adapter-Module configuration

    Hi All,
    I have the following requiremnt.
    "Duplicate files should not process"
    Following are the File Access Parameters.
    Source Directory: ABC (ex: contains aa1,aa2,aa3,aa4 files)
    Filename: *
    File name mask: aa*
    My doubt is if they place aa1 file again in ftp , i should not process.
    For this I'm thinking to write module configuration.
    Can any one suggests , whether this is the correct approach? If it is could u explain how to write this module and where to write this module and how to import in xI, do i need to pass any parameter name in module configuration.
    Regards,
    venu.

    Hi Venu,
    You can go with Module in the Sender File Adapter.
    First you need to check the file name and you need to store this file name in the Database.( you can use Java Database).
    If there is an entry in the database for that file, then reject the whole file as per the business requirement. So that you can avoid , overhead of Mapping. Because if there is an error set the flag in the message and check this flag in your Receiver Determination, if it is an error send into error directory.
    Another way is outside the XI, i.e using shell scripts.
    Regards,
    Moorthy

  • Error: File adapter dynamic directory not safe with subdirectories

    Hi,
    I'm using variable substitution to determine the destination directory for my RFC->File scenario
    In my RFC I have a tag called <PATH> that contains the full target path. If that path doesn't have subdirectories the variable substitution works perfect, for example:
    <PATH>directory1</PATH>
    Then in File adapter I have %var1% with the value of PATH and it works.
    But if I want to add subdirectories on the path, for example <PATH>directory1/subd2/subd5</PATH> the solution doesn't work.
    That's the error that I get:
    Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: java.text.ParseException: Security violation encountered during variable substitution: Content of variable var1 is not safe: directory1/subd2/subd5
    How can I access to that directory?

    Hi Marshal,
    From help.sap:
    To disable the check the adapter performs for the element data, set the Disable Security Checks indicator.
    Otherwise, the adapter checks whether the element data contains characters that could lead to security risks in the file system environment. The check includes the characters u201C/u201C, u201C\u201C, and u201C..u201C.
    Carlos

  • How to create a write operation in file adapter dynamically in to a folder.

    Hi all
    i want to explain my scenario...
    i am giving input to file adpter which is having read operation,and i am giving that input to an human work flow.i had two operations reject and resubmit in my task flow...i am editing the task with some changes...and resubmiting the task from the oracle bpm worklist.......now how can i give that task to again my input folder.....
    and another question is,
    if i am using three file adpters with 3 differnt folder structure having read operations.and i am giving only one file to one file adapter.and i am giving it to human work flow and i am editing it and i have to resubmit the file to the input folder.....so i i have to give back to input folder dynamically(with out hard coding the folder structure).....How can i give ?????
    so any one can help me....please...
    Thanks in advance...
    varma.

    ya...its gd....but i had a problem in my scenariou....
    i used this concept as a error handling frame work....that means
    i had so many composites which take purchase order as its input from a file adapter........if the input order differs from my xsd,i populated that input as a error file in another folder using some fault handlers... and i am giving that folder to human work flow and i a m editing that task and i am resubmiting it...so that it should go to the input folder of my composites as a input again...so how to differ ,for which composite i have to give as this task as input again.....dynamically it should vary in ...........
    please help me....
    thanks in advance....
    varma

  • File Adapter : Dynamic Target Directory

    Hi EveryBody,
    I have an IDOC to File Scenario in which based on some field value X in IDOC i need to send the file to Different locations under the same FTP Server.
    For Example : if X = 01 then Target folder T1
                            X = 02 then Target folder T2.
    Can somebody help me out on the same.Possibly this can be done by Dynamic Configuration.Can somebody send me some links.
    Regards,
    Zabiulla

    Hi,
    First of all I would suggest to avoid the mail communications for the query.
    Its against the SDN rules.
    please read [Rules of Engagement|/thread/117188 [original link is broken];.
    About Solution, you need not have to go for Dynamic Target Directory
    You can use the Variable substitution concept here.
    In the Target directory pass the %Var1%
    and use Var1 ---> payload:<fieldName>
    Refer to the last part of this link to understand this better,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    For dynamic configuration you can also refer below link
    Dynamic configuration of Receiver FTP File channel
    Thanks
    Swarup

  • HTTP receiver adapter: dynamic configuration

    I was told that if I have a URL and some parameters, I can use a sync HTTP receiver adapter to call a site.
    I know this can be done using some kind of dynamic configuration, but I am not familiar with this adapter.
    The most important question here is that I need to know if this can be done throw PI, so my question is:
    Is there a parameter limit in the HTTP adapter? If so, what is the quantity of parameters that I can give to the adapter?

    for the ASMA parameters you can use for the HTTP receiver adapter check
    Configuring the Receiver Plain HTTP Adapter - http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm

  • Receiver File adapter: dynamic folder name based on file name

    Hi there,
    is it possible to set up one communication channel that will use different target folders based on file name?
    E.g.
    File abcdef will be saved to /root/abcdef/abcdef or /root/abcdef/abcdef.txt
    File xyz will go to /root/xyz/xyz or /root/xyz/xyz.txt
    I know I could use Sender/Receiver Service, Interface/namespace or data from message for variable substitution but could not find an easier solution for this scenario than to create multiple communication channels.
    Thanks.

    If you haven't a message mapping, then you can create only an interface mapping with an abap mapping.
    In your abap mapping:
      DATA l_record type mpp_dynamic.
      l_record-namespace = 'http://sap.com/xi/XI/System/File'.
      l_record-name = 'FileName'.
      l_record-value = "your filename"
      dynamic_configuration->add_record( l_record ).
      l_record-namespace = 'http://sap.com/xi/XI/System/File'.
      l_record-name = 'Directory'.
      l_record-value = "your directory ".
      dynamic_configuration->add_record( l_record ).
    Afther that, you must activate Adapter Specific Message Attributes (directory and/or filename) in your target communication channel .
    Regards,
    Carme.

Maybe you are looking for