File Analyzer

Design and implement a class called FileAnalyzer that analyzes the file C:\allswell.txt and creates an output.dat file containing the results of the analysis.
The output.dat file should contain:
The number of lines in C:\allswell.txt
Total number of sentences in C:\allswell.txt
total number of words in C:\allswell.txt � In this assignment, a word is any contiguous collection of letters, numbers and other non-space symbols bounded by one or more spaces or punctuation.
A frequency count of character usage C:\allswell.txt� Characters are the letters a � z
total number of number characters in C:\allswell.txt � Numbers are the characters 0 � 9
total number of punctuation characters used in C:\allswell.txt
� Specifically a count of the number of:
periods ( . )
commas ( , )
semicolons ( ; )
colons ( : )
dashs ( - )
single quotes(�)
double quotes(�)
exclamation marks(!)

Where is the problem? What is your question? You cannot really expect sb. to do you work.

Similar Messages

Options missing on iMovie under File Analyze Video

Hi. I just got the new iLife 11 and was looking through the video about the people finder on this page. http://www.apple.com/ilife/imovie/
However, when I look at iMovie on my computer I don't see the mark camera pans option under file-analyze video and the button that shows the keyword editor is not there. How do I get these options to appear?

Wow! Didn't even know that was there! Thanks for the speedy reply. Has that always been there? And would you mind just giving me a brief description of the other things it enables and how to access them? Because I didn't know what most of the other stuff was on the list. Thanks so much for your help!

Streaming log file analyzer?

Hi there,
We host several flv files with Akamai and recently enabled
the log file delivery service. So, we now have Akamai-generated log
files in W3C format. I was assuming I could use WebTrends to
analyze these, but after looking at them briefly, it shows
different events like play, stop, seek, etc., and I don't know that
WebTrends would be able to process all of that.
Our most basic requirement is to see how many times each
video was viewed. If we could get more detailed analysis, like
video X gets viewed on average for 2:00, but video Y only gets
viewed for 20 seconds, that would be great as well.
Does anyone have any suggestions for the best software to
analyze these files?
Thanks,
Matt

Immediate AI:
0. Check the log file auto growth setup too and check is this a practically a good one and disk has still space or not.
1. If disk is full where you are keeping log file, then add a log file in database property page on another disk where you have planned to keep log files, in case you can't afford to get db down. Once you are done then you can plan to truncate data out of
log file and remove that if it has come just first time issues. If this happens now and then check for capacity part.
2. You can consider shrinking the log files after no any other backup are going on or any maintenance job like rebuild\reorg indexes \update stats jobs are executing as this will be blocking it.
If db size is small and copy files from prod to dr is not that latency prone, and shrink is not happening, then you can try changing recovery model and then do shrinking and reconfigure log-shipping after reverting recovery model.
3. Even you can check if anyone mistakenly places some old files and forgot to remove them which is causing disk full issues. Also
4. For permanent solution, do monitor the environment for capacity and allocate good space for log file disks. Also consider tweaking frequencies of the log backup from default that suits your environment.
Santosh Singh

Missing imovie options in File Analyze Video

How do I enable the "People Finder" option in iMovie '11? When I select "File" the only option for analysis is "Analyze for Stabilization". I don't know if I am missing other options, too.
Checking this thread (https://discussions.apple.com/message/12472264#12472264), I verified I DO have the "Show Advanced Tools" enabled.

That indicates where the problem reside.
A. reg downloading iMovie - Have no idea - my are on a iLife DVD
B. BUT - try this first
• Start a new User account
• Log into this
• Now try iMovie
If the tools are OK here - then the problem to 99.5% resides in a bad pref file
If so - You need to trash MORE
• Delete iMovie pref. file
iMovie pref. file resides.
Mac Hard Disk (start-up HD)/Users/ "Your account" /Library/Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iMovie.
If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
( It can be done like this: Open Terminal, then enter: chflags nohidden ~/Library
Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
or - do like this.
On the Finder window at the top left of the screen,
Hold down the Option key and clicked on Go.
This allowed You to see the Library folder and select it.
Then keep the Option button pressed down in order to see and select the Library folder.
Once found it, You are able to navigate to the iMovie preferences file and move it to the trash. iMovie then start’s up fine!
Yours Bengt W

Cap file analyzer program?

Hello all,
Is there any program to analyze the cap file?
the program read the cap file and print out or make a file with cap file information by components user kindly format. like Header Component.tag = 0x01 size=0x0A .....
Thanks,
Julie.

hi:
i write a program that can parse CAP file, hope that is helpful to you.
http://www.akaembed.org/Inetpub/uploads/AKA_Mail/JavaCard/CAPParser/CAPParser.exe
Good Lucky!

CAP file analyzer - easy method size acquisition

Hi all,
I want to calculate how many bytes each method I have in my JavaCard applet takes. Right now, I am deleting the body of my methods (effectively turning that into a stub) and compile, and subtract the new size from the size of my CAP before removing the method. Can there be an easier way to do this? (A tool to analyze CAP itself, maybe?)
Any directions greatly appreciated..
Regards,
Burak

hi:
i write a program that can parse CAP file, hope that is helpful to you.
http://www.akaembed.org/Inetpub/uploads/AKA_Mail/JavaCard/CAPParser/CAPParser.exe
Good Lucky!

Avinaptic,a powerful video file (and DRF) analyzer for testing

AVInaptic is a program with a simple GUI that analyzes file type AVI, ASF / WMV, MP4/MOV, Matroska (MKV), OGG, GMOs and FLV, and shows a lot of information on the technical characteristics (useful in predicting whether the movie will be read by their player stand-alone). It also allows you to make simple changes on the fly, set delays (or advance) on all audio tracks and edit the FourCC allows you to remove any trace in the files (video, audio, subtitles, attachments);. Italian author site but you can choose english in the program. Site translated here.
http://fsinapsi.altervista.org/ (italian)
http://forum.doom9.org/showthread.php?s … c&t=123076
# Contributor:Xemertix <arch88(at)katamail(dot)com>
pkgname=avinaptic
pkgver=20071118
pkgrel=1
pkgdesc="a powerful video files analyzer"
arch=('i686' 'x86_64')
license=('GPL')
depends=('sqlite3' 'gmp' 'gtk' 'libjpeg' 'libpng' 'file')
[ "$CARCH" = "x86_64" ] && depends=('lib32-sqlite3' 'lib32-gmp' 'lib32-gtk' 'lib32-libjpeg' 'lib32-libpng' 'lib32-file')
url="http://fsinapsi.altervista.org/"
source=(http://fsinapsi.altervista.org/code/${pkgname}/${pkgname}-fixed.tar.gz
avinaptic.desktop)
md5sums=('d5f3ba28fe0e005ebb38bd8725f89932'
'64e5d6855e5957e7cd266198abcd5324')
build() {
cd $srcdir
# Program
install -D -m 755 ${pkgname}/avinaptic $pkgdir/usr/bin/avinaptic
# Freedesktop compatibility
install -D -m 664 ${pkgname}/icone/avinaptic.png ${pkgdir}/usr/share/icons/avinaptic.png
install -D -m 664 avinaptic.desktop ${pkgdir}/usr/share/applications/avinaptic.desktop
# Documentation
install -d -m 775 ${pkgdir}/usr/share/doc/avinaptic/
install -D -m 664 ${pkgname}/testi/* ${pkgdir}/usr/share/doc/avinaptic/
Screenshot
Note:Avinaptic is a 32-bit program.For 64bit installations i've included lib32-file in the archive.The program is available in both english and italian.
Current Issues:
Only the analysis of .mkv files is not working properly on my 64 bit installation..avinaptic shows garbaged hex output data.Maybe an incompatibility with something..other video files are analyzed correctly.
http://www.datafilehost.com/download-3a701c57.html
Last edited by Xemertix (2009-05-22 19:44:15)

s3kt0r wrote:Question: Since I don't actually use any icons (ratpoison user), I can just comment out the line which calls for avinaptic.desktop, right?
Yes.
edit: Installed ok, no problems with matroska, no problems with output, im on 32b though.
thanks
The output with mkv files looks like that for me:
[ About file ]
Name: trailer2.mkv
Date: 16/05/2009 12:39:32
Size: 6,337,145 bytes (6.044 MB)
[ Generic infos ]
File type: data
[ Hex dump ]
00000000: 1a 45 df a3 01 00 00 00 00 00 00 23 42 86 81 01 |.Eß£.......#B...|
00000010: 42 f7 81 01 42 f2 81 04 42 f3 81 08 42 82 88 6d |B÷..Bò..Bó..B..m|
00000020: 61 74 72 6f 73 6b 61 42 87 81 02 42 85 81 02 18 |atroskaB...B....|
00000030: 53 80 67 01 00 00 00 00 60 b2 3e 11 4d 9b 74 40 |S.g.....`²>.M.t@|
00000040: 3d 4d bb 8b 53 ab 84 15 49 a9 66 53 ac 81 df 4d |=M».S«..I©fS¬.ßM|
00000050: bb 8c 53 ab 84 16 54 ae 6b 53 ac 82 01 37 4d bb |».S«..T®kS¬..7M»|
00000060: 8d 53 ab 84 1c 53 bb 6b 53 ac 83 60 af 41 4d bb |.S«..S»kS¬.`¯AM»|
00000070: 8d 53 ab 84 11 4d 9b 74 53 ac 83 60 b0 f3 ec 01 |.S«..M.tS¬.`°óì.|
00000080: 00 00 00 00 00 00 93 00 00 00 00 00 00 00 00 00 |................|
00000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
This report was created by AVInaptic (18-11-2007) on 21 mag 2009, h 09:41:13
I need some arch64 tester

Program to analyze quicktime files?

Hi,
I'm having a bit of trouble with our capture setup at work, the short version is that we get huge green pixel glitches in our captures from our DigiBeta to Final Cut Pro.
We're working on a solution, but in the meantime I was wondering if anyone knew of a program, that can analyze a self-contained quicktime file?
It should be able to analyze each frame and report if there's any oddities in the file. For example to be able to find a green glitch in one frame of the capture.
It would probably report a lot of cuts and flashes if these are apparent in the file, but it would take a lot shorter time to catch these errors, than to watch the whole capture through.
Any help is appreciated!

Usually the big green glitches are clogged heads on the digi deck. That's pretty much a signature.
Never heard of such a file analyzer. could be useful, but there really is no substitute for watching your material through for errors. Then you can say you did it and rest easy knowing it left your facility in pristine condition.

Analyzer 6.5.1.2.01063 Gifs problem

i have a problem when i put an animated gif in a report, when i want to open the report, show me the following error" An unknown exception ocurred while communicating with the server.; nested exception is:java.lang.NullPointerException"how can i solve this problem?thanks

6.5.1 runs on JRE 1.3.1.04, 6.2.1 runs JRE 1.3.0.02. The application looks for the JRE in different folders. It will be a onetime download for the user. You can change the runtime on the 6.5.1 release (Hyperion won't support it but your user field would not have to "re-download".To change your classID do the following:Browse to the <drive:>\hyperion\analyzer\appserver\webapps\Analyzer6_server directory. Open Administrator.jsp in notepad (hold down the shift key and right click on the file. You should see a menu option call ?Open With??, select that and select Notepad from the drop down menu.~ Do a find on ?classid=? (ignoring the ??)~ Change the classid= from "clsid:<%= com.hyperion.analyzer.utils.general.HYAURLParamHandler.getJREClassID(request) %>" to match the classID in the Administrator.html (6.2.1)~ Next look for codebase="<%= com.hyperion.analyzer.utils.general.HYAURLParamHandler.getJRECodeBaseValue(request) %>"> (this should be 4 lines below the ?classid=? line.~ Change the codebase to match the code base listed in Administrator.html~ Save file changes~ Perform the above steps on the file Analyzer.jsp. This will allow you to control the JRE codebase. One word of caution... Hyperion tested and built on a particualr version of JRE for a reason. Unless it is a pain to change the JRE on clients (several hundred users), I would advise upgrading to the JRE 1.3.1.04

How to read all files from a folder Diadem

Hello,
Can somebody tell me how to load automatic some .csv file form a folder to Data Portal in Diadem.
I do some tests and during this tests I record data ( .csv files), files that I load manual now (*FileNameGet command), but I want when the tests are done and I load the script, then atomatic to load the csv files, analyze and build the report.
Please advice me how can I do that.
Thank you
(Attached you have my program)
Solved!
Go to Solution.
Attachments:
scripts.zip ‏10 KB

Duplicate Post here:
http://forums.ni.com/ni/board/message?board.id=60&message.id=10467#M10467
David_L | Certified LabVIEW Architect
LabVIEW Tools Network | LabVIEW Tools Network Developer Center

Display error messages in spool file

I am running the below code (ssn_run.sql) using sqlplus 10.2.0.1.0 on my windows XP professional client PC.
The database is a Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit running on Solaris
There are 3 insert statements and 3 update statements. I have mentioned 'show sqlcode' after each of these
dml statements. Hence currently, I look at the spool file, analyze before I confirm that every sqlcode is a 0.
Now, is there a way to alter this code so that it can show if any of the sqlcode is not 0(if there is a problem) somewhere
at the end of the spool file ? Or even if I am able to just indicate if there is any ORA- error anywhere in the code and can indicate this somewhere at the end of the spool file, that is fine as well.
--The code
accept input_ssn prompt 'Enter SSN :'
set feedback on
set echo on
set term on
set heading on
set pagesize 0
set linesize 10000
set verify on
undefne sdate input_ssn
col sdate new_value sdate
col input_ssn new_value input_ssn
select to_char(sysdate,'YYYYMMDD') sdate from dual;
spool C:\PERSON_DATA_&&sdate._&&input_ssn..TXT
select 'REPORT GENERATED ON : '||SYSDATE FROM DUAL;
INSERT INTO ADDRESS_OLD SELECT * FROM ADDRESS WHERE ADDRESSID IN(SELECT ADDRESSID FROM PERSON_ADDRESS
WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn'));
show sqlcode;
commit;
INSERT INTO PERSON_OLD
(PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME, AKANAME, DCFM,
IROWID, SUFFIX, PTYPE, OLD_SSN)
SELECT PERSONID, TITLE, FNAME, MNAME, LNAME, ACFM, SIN, UNAME,
AKANAME, SIN FROM PERSON WHERE SIN = '&&input_ssn';
show sqlcode;
commit;
INSERT INTO MEMBER_OLD
(CLNT, MKEY, PERSONID, MEMNO, OLD_MEMNO)
SELECT CLNT, MKEY, PERSONID, MEMNO,MEMNO
FROM MEMBER WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
show sqlcode;
commit;
UPDATE ADDRESS SET STREET1 = 'ROCKY RD',STREET2=NULL,CITY = 'ALABASTER',PROVINCE = 'AL',POSTAL='34216',
PHONE1='1111111111' WHERE ADDRESSID IN(SELECT ADDRESSID FROM PERSON_ADDRESS WHERE PERSONID
IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn'));
show sqlcode;
commit;
UPDATE PERSON SET FNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS'),
LNAME = TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
UNAME = TRANSLATE(SIN,'0123456789','ACEGIKMOQS')||' '||TRANSLATE(SIN,'0123456789','SQOMKIGECA'),
AKANAME=NULL WHERE SIN = '&&input_ssn';
show sqlcode;
commit;
UPDATE MEMBER SET MEMNO = MKEY WHERE PERSONID IN(SELECT PERSONID FROM PERSON WHERE SIN = '&&input_ssn');
show sqlcode;
commit;
spool off;
set term on
set feedback on
set HEADING on
set verify on
--End of code
Thanks

QUESTION:
As in the code above, I am inputting a value while running the script. And I am spooling all of it to a spool file. I also get the old and new values , like
old 7: client_54.PERSON_OLD WHERE OLD_SSN = '&&input_ssn'))
new 7: client_54.PERSON_OLD WHERE OLD_SSN = '123456774'))
old 11: WHERE PERSONID IN(SELECT PERSONID FROM PERSON_OLD WHERE OLD_SSN = '&&input_ss
new 11: WHERE PERSONID IN(SELECT PERSONID FROM PERSON_OLD WHERE OLD_SSN = '123456774'
Is there a way I can get rid of these in the spool file?

TDMS error -2503. Is seemingly corrupted file able to be recovered?

We performed a rather expensive test with multiple instruments and gauges on a specimen and recorded the data to a TDMS file. Before we performed the test, we recorded to a "dummy" tdms file for a few minutes and then reviewed the file to confirm that we were recording all the gauges properly. Everything was fine and we knew we were ready to test.
We then recorded during the test and the TDMS file ended up being about 400 Mb. After recording we attempted to open the file and recieved the following error:
"Error -2503
Possible reason(s):
LabVIEW: Specified file does not comply with TDMS file format standards."
There is no record of this error on the forums or anywhere on the website. The data is there, the file is huge. We just need to figure out how to recover it. This data is very important to us. Is there any way to analyze the tdms file and recover the data?
Any time we attempt to open the file in any way we receive the same error. We have tried opening it with the TDMS Excel Importer, Open TDMS file.vi, TDMS Defragment. No luck. The error seems to be occurring in the open tdms file.vi.
The file is very large or I would post it here. Please help
[will work for kudos]
Solved!
Go to Solution.

I solved the problem.
I was trying to figure out which part of the tdms file was corrupt. I was preparing for a long day of altering bits/bytes to fix the corruption, which I have done in the past and is never fun, but it wasn't necessary. Using a file analyzer (http://www.safer-networking.org/en/filealyzer/index.html) I could see that the data was there and the headers were correct throughout the data in the tdms file. There didn't appear to be any wierdness in the beginning or end of the file. This told me that the problem was probably in the index file. I had been reviewing the new advanced tdms VIs in LabView 2010 and was looking for something that could help me. The Advanced TDMS Open.vi mentioned that it deleted the index file and opened the tdms file. I thought perhaps it would recreate the index file. It didn't. The tdms index file was automatically recreated when I opened the the TDMS file and it recreated it properly. The data is there. The file opens properly this time. All is well. It definately leaves me wondering what created the corruption in the first place and how to prevent it in the future.
Solution:
Delete the tdms index file. The TDMS Excel Importer will recreate the index file properly when you open the file. The file opened with no errors for me.
[will work for kudos]

Extracting Windows Vista Files

Hi,
I'm that dork that installed Solaris 10 OS w/o partitioning the drive and I will agree with all of you that I torqued my system. I'm going to admit now that I'm a newly minted Electrical Engineer (graduated this winter) and my GPA wasn't shabby at all, so I should have had the common sense to take the installation a little more slowly and read more up on installation before doing it. I guess it was a last minute meltdown after all the stress of completing the degree (that may be an excuse, but maybe EE != CS skills).
So here goes...
I'm trying to extract files where a Vista partition should be to back before reinstalling Vista and maybe Solaris 10 the RIGHT way.
Vista doesn't show up on the GRUB and I DIDN'T back up my files (ouch). None of the personal files I had were really crucial to anything except graduating (and I already did ), but I had some files that would be nice to keep (Soundgarden songs, maybe some project files from school that I was proud of). I've been trying to get Vista to show up but the only things on the GRUB are Solaris 10 and the Solaris safe OS. I didn't partition my hardrive before the install, but there was an automatic partition that seemed to take place when I was installing the Solaris 10 OS from DVD. At present Solaris 10 is only registering 1GB of free hard disk space (which confuses the crap out of me. If that were the result of the install, then perhaps Vista still exists, but when I pop the Vista DVD in my drive, it tells me the 140 GB space needs to be reformatted, but failed to do so when I gritted my teeth and told it to reformat that space.)
So far as I can tell there are no help files associated with Solaris at the present moment so I'm not getting to far in analyzing what's going on in the system. There is a file analyzer which seems to get good results until it gets 60% into the file structure, then seems to produce an endless tree of repeating folders.
So any advice that would get me to those files before I commence with the washing of my hard drive would be really sweet.
Thanks in advance!
Matt

If memory serves me correctly, there was a question asked in the installation process that asked me how much disk space I wanted to allocate for the Solaris 10 install. This might have had to do with some optional programs offered from the DVD though. But even though they offered some of the optional programs (and I tried to opt for some of those) the DVD told me that I didn't have enough disk space to install any of them, so I went for just the basic install.
Sorry my memory is so sketchy, I must have been halfway delusional right after the semester ended.
Matt

Corrupt Files: Softw

Hey i just got my zen and uppon putting music onto it it started freezing anf then theier was a hrdware problem..... anyway i sent it back but somoen told me its becuase of corrupt song fiels i have on my computer that go inot the player and screw it up. Well my new one is arrving soon from creative and in order not to screw it up again and send it basck again and pay for shipping AGAIN! i was owndering if this would actually happen... if you had corrupt song files on thier... and does anyone know a good way to determien whihc songs are corrupt?
!!! or a software program that clears corrupt files or restores them..... or even if it matters lol... i know i can record the sonfgs onto another computer and it wont be corrupt since im just recording the sound not the actaul file but that would take forever since i have 800+ songs on this computer thanks and looking forward to replies.

If you are downloading songs from p2p networks then there is a chance the rip/encode is not very good and the track could be corrupted. You get what you pay for really applies in this case!! However, if you run a file analyzer and better a file fixer over the suspect tracks, you may be able to remove the corrupt frames.
MP3Library (get it at http://www.jumpingcholla.com/jce_nomad.htm) is an excellent tag editor and file analyzer/fixer. You can also google for other software to fix corrupt tracks. If you have to delete a frame or worse quite a few, from any track, there will be a HUGE artefact in the song ... may not be worth fixing it.
jake

Does Oracle provide public Symbol Files (PDB) for OCCI/OCI ?

When debugging an application under Windows (with Visual Studio or WinDBG) that makes use of OCCI it would often be convenient if there be symbol files (PDB files) for the Oracle OCI/OCCI libraries. ( [public symbol files|http://msdn.microsoft.com/en-us/library/ff553493%28VS.85%29.aspx] , just as Microsoft makes available for all system libraries)
Does Oracle provide these?
thanks,
Martin

Hi,
I have this bug opened http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=7191593 and http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=7175004.
I also opened Jetty bug https://bugs.eclipse.org/bugs/show_bug.cgi?id=335813 and It sounds like it is a JVM on windows 2008 problem..
In order to investigate it further I also need these .pdb files which I am trying to get with no success (http://stackoverflow.com/questions/12265573/looking-for-java-pdb-files-analyze-a-crash-hdmp-file)
Thanks.

File Analyzer

Similar Messages

Maybe you are looking for