File occasionally stuck in staging on File Poller Proxy Service

Hi All,
I'm having some problems with a File Poller Proxy Service. The Proxy reads xml files in a polling shared directory and puts the message in a queue. The files are small (<1kbytes).
The problem is that occasionally the file gets stuck in the staging directory and never gets to the jms queue. If I cut the file and paste it again in the polling directory, it gets processed fine.
Any ideas?
Thanks.

I have one cluster on the web logic server with 4 managed servers in it.
The proxy runs on ms1, and the staging directory is on a different physical server shared folder.

Similar Messages

  • Increases number of JMS consumers in an OSB jms-polling proxy service

    Hi All,
    I'm looking for an option of increasing the number of JMS consumers in a JMS OSB proxy service. I know that this is possible by modifying the ejb, but I'm looking for any other option by using weblogic/proxy configuration. When I monitor the queue I have a number of 16 message consumers, but I would need to increse it to a higher number in order to improve the performance.
    Please send me any suggestion o advice to solve it.
    Thanks in advance
    Luis

    Sorry I sent it to the wrong place. I have moved it to Weblogic

  • Mapping Stuck Threads to Proxy Services

    Hello OSB Experts:
    Is there a way I can map the information of a thread dump showing stuck threads to the proxy service that those threads are executing?
    I am facing a situation that seems to be usual: one of several backends is performing poorly, producing stuck threads in the OSB app. servers. After a while, the performance of the whole OSB is affected because of the number of threads in stuck state.
    I would like to be able to pinpoint the backend with problems in order to solve the problem before the health of the whole OSB is affected.
    Can this be done without 3rd party tools?
    Thanks
    Sebastián

    No, it is not possible to get the the proxy service name from the thread dump. The OSB stuff is handled under a weblogic wrapper thread.
    One of the main reason for stuck threads is some of the proxy service calls taking a lot of time through the business services and there is no appropriate timeout set for the calls on the business service.
    You have couple of options to find out the culprit. You can enable tracing on the proxy services and the business services and capture the metrics that should help you find a pattern for the performance. The numbers will help you find which backend is taking more time.
    You can get nmore details on OSB Monitoring @ http://docs.oracle.com/cd/E23943_01/admin.1111/e15867/monitoring_ops.htm#OSBAG472
    Secondly, always set some realistic timeout value (like 30 seconds/60 seconds depending on the sla of the back-end) on the business service. Leaving it to default (that is 0) is like configuring a indefinite timeout (in which case it uses the default weblogic connection timeout setting of 10/15 minutes).
    This way the threads are not stuck waiting for the response and dont cause issues.
    Additionally you use OSB alerts to notify you for service behavior discrepancies w.r.t response times, number of errors etc .. Refer http://docs.oracle.com/cd/E23943_01/admin.1111/e15867/monitoring_console.htm#CACDCDAH for more details.
    Hope this information helps.
    Thanks,
    Patrick
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).+
    https://forums.oracle.com/forums/ann.jspa?annID=893

  • How to control File read Proxy Service when it is polling from folder?

    Hello all,
    In my current requirement we are receiving  xml's through one folder(LOCAL) from source side.we are picking those xml's  by proxy service PS1  as file transport for every 10 sec and configured that folder path.In PS1 message flow we put on routing action to one bussiness service,that business service sending those xml's to one MQ.
    We already created this interface but the issue is source side they plan to change that folder and also they want to stop this service(folder to MQ) sometimes based on synarios.That folder will be delete or if exist proxy wont read messages from that folder.
    But proxy is still looking for that folder in Test ENV on Unix system then it gives error beacuse of unix folder structure is different,proxy unable to create that folder in unix system.it is creating in windows.
    Now we want to control that service when the folder is ready that time only  proxy will activate otherwise not..i.e like if condition "if cndtion is satisfied PS1 starts the polling from that folder else condition should be work.
    How can i control PS1 service?
    Is there any chance to control by using another proxy?
    Experts please guide me..
    regards
    venu

    Hi Terry,
    According to your description, my understanding is that you don’t want the yollow bar notification to display when you open Access documents.
    This issue seems to be about the client application. Please compare the followings with the things that you did:
     1.Open the documents
     2.Click File->Options->Trust Center->Trust Center Settings
     3.Click Protected View, unselect ‘Enable Protected View for originating from the Internet’
     4.Click Message Bar, select ‘Never show information about blocked content’
     5.Click Macro Settings, select ‘Disable all macros without notification’
    In addition, as this issue is about Office, I commend you create a new thread in Office forum, more experts will assist you with this issue.
    Office forum:
    http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Unable to poll for files in FTP server using Proxy Service (in OSB Project)

    Here are the stepd followed for creating proxy service that should poll ftp server to retrieve files but polling is not happening and unable to see any errors in logs.
    1. Created service account by selecting resource type as static and providing the ftp user and password details.
    2. Created a New Proxy Service in eclipse
         Tab General - service type as Messaging Service
         Tab Messaging - Request Message Type as Text, Response message type as None
         Tab Transport - Protocol selected as "ftp"
              - Endpoint uri entered in the format - ftp://hostname:port/directory
    FTP Transport -Selected "external user" as User Authentication
              - Selected the Service Account thats created in step1/
                   - File mMask - *.*
                   - Polling Interval 60
                   - Read Limit 10
                   - Post Read Action - Delete
                   - Transfer mode - binary
                   - Download Directory - "some local directoy"
                   - Error Directory - "some local error directory"
    Could any one please help here to trouble shoot the polling issue and correct me if this is wrong approach.
    Thanks

    Did you configure the FTP adapter which is present in Weblogic server?I think he's using FTP transport in OSB and not the JCA adapter, if that's the case FtpAdapter configuration wouldn't help...
    unable to see any errors in logsThat's odd, try to mess up the hostname and see if you get a connection refused on the logs...
    It may be a permissions issue, the user you're connecting may not even "see" the files you place there... Try using the same user to create and to poll files...
    Cheers,
    Vlad

  • My tv show and movies are getting stuck in the processing file stage

    I purchased some TV show episodes and movies on itunes. They are stuck in the processing file stage, and wont let me pause them and restart. When I close itunes it wont open again. I have to restart my computer. Please help, they have been stuck for over a week now.

    please contact me on [email protected]

  • OSB - how to handle poll file error in FTP Proxy Service

    I configed a proxy service to poll file from a FTP server.
    How can I capture the error when the proxy service cannnot poll? (FTP server is down, folder not found, username invalid, etc )
    I want to make it show in the Operations >Message Reports table.

    It is not possible. Those errors will only be logged to logfile.
    Manoj

  • File icon stuck in Mavericks Finder toolbar

    I just upgraded to Mavericks and now I have an InDesign file icon stuck in the a Finder window toolbar. The file and InDesign are both closed. If I click on the icon InDesign will launch and open the file. The file is in a Dropbox folder and not on the Desktop. Anyone know how to remove it from the toolbar? I'll insert a screen shot. Thanks

    Just found the solution. Holding down the command key and dragging it off the toobar.

  • XML file getting stucked in queue in ECC preventing material status in MDM.

    XML file getting stuck in queue in ECC preventing material status in MDM to be changed.
    Hi SAP Experts,
    We have an issue regarding XML messages getting stuck in queue in ECC preventing the material status in SAP MDM to be changed from "Approved" to "Updated/Posted".
    Checking in transaction SXI_MONITOR the status of the XML Messages are Scheduled or Green Flagged, looking at the time started it has been an hour and it is not yet processed successfully; and also checking the queues XBTR* (XBTR0001, XBTR0002 and ETC.) via transaction SMQ2 have stopped.
    We need to manual process the XML messages for it to be processed successfully.
    I'm unable to understand why these files are getting stuck in Queue's.
    Many thanks in advance and have an awesome day ahead.
    Regards,
    Aeron Merc

    Hi Aeron,
    Check whether the Queue XBTR* (XBTR0001, XBTR0002 and ETC.) is Unregistered in SMQR.
    If it is so you can see as U in the Queue type.
    Try to register by selecting the queue and click on Registration button and activate.
    Then check your message in MONI,  hope this should solve your problem.
    Thanks
    Sai.

  • TS4272 erase free space stuck on creating temporary file

    I upgraded to 10.7.4 and followed instructions in http://support.apple.com/kb/TS4272
    At step 9 Disk Utility is stuck on 'creating temporary file' for the last 24 hours. I have canceled and tried more than once.

    This may be a problem with Disk Utility on your boot drive. Try rebooting to the Recovery HD and using Disk Utility on that partition (it should appear in the OS X Tools menu). You might also try running a disk verification and repair to ensure the filesystem and partition structure are intact.
    Alternatively you can also bypass the disk utility application by using the Terminal to erase free space, which can be done with the following command:
    sudo diskutil secureErase freespace 0 disk0s2
    Note that while the device "disk0s2" is commonly the boot drive for systems with a single hard drive, this may be different for you system. Check the device by opening Disk Utility and getting information on your boot volume, and you should see the proper device name listed as "device identifier."

  • File icon stuck behind recycle bin

    Somehow a photo file got "stuck" BEHIND the recycle bin icon in my toolbar. No matter what I do, I can't seem to click and drag the file out from behind the recycle bin icon to then throw it INTO the recycle bin. Any ideas on how to fix this? It's been just sitting behind it for months now and I am too dumb to figure out how to deal with it (former PC user and soon to be exclusively PC user)

    Hi morrisgal and welcome to Apple Discussions.
    Either go to the Apple menu>Dock>Turn Hiding On or just hit the cmdaltD keys. Once the Dock is out of the way drag your file further onto the desktop, hit cmdaltD again and you Dock will reappear.
    Another way would be to open a Finder window, navigate to Desktop within Finder, identify the file and drag it to the Trash from there or ctrl click>Move to Trash.
    Don't be too hasty in becoming an exclusive PC user, I ditched PCs many years ago after staying up all night trying to disinfect my PC laptop from a virus, and yes, I did have AV software. It got infected before a fix had been released.
    I've never regretted the move and leaving aside the virus issue I much prefer the Mac interface as well as the hardware. 'Here' is a wonderful community of fellow Mac users most of whom will go out of their way to help, just for the satisfaction.
    Whatever you decide, good luck!
    Adrian

  • Trashed single TM 'IN PROGRESS package file' now stuck in trash. Error8003

    First Time Machine backup on 7.4.2010 after upgrading from 10.5 to 10.6.x went well. The attempt to backup starting on 8/23 gave red 'Failed' icon with "the backup was not performed because an error occurred while copying files to the backup disk" message after each of several attempts to backup after dish utility drive fixes per Mr. Pondini and reboots.
    TM Buddy kept locking and freezing Dashboard and attempts to use consul to ferret out the errant file(s)left me a bit frustrated.
    Upon opening the backup drive I noticed the 'IN PROGRESS' package file listed in the subdirectory and figured as it was not a Dated backup folder and it did not appear in Time Machine display, I could right click and trash this 'package file' generated by the failed backup and move on to a new backup attempt... WRONG!! File is 'still' in the trash! Can it be moved out of the trash and re-established back where it belongs or is this a major recovery process
    Subsequent backup ran for 7 hours all night and never was completed and now that In Progress file is stuck in the trash. Does the Pondini/Cglusman7/7/10 thread apply here as well??
    What is strange is that the backup drive is showing the dated folders for my backup attempt but they don't show up in the Time Machine display window...!!!?????
    Message was edited by: S. Sagan

    S. Sagan wrote:
    If I understand how TM works, each successive backup performed without any changes occurring only contain a link back to the original backup. So even though they're not taking up much disk space, it displays 10 relatively useless hourly backup windows on the TM screen. I found your instruction for deleting these 'useless' extras.
    Why bother? Time Machine will delete all but the first of the day after 24 hours.
    And while they may not be critically important, they may not be useless, either -- if you've been on the internet, for example, your browser history, bookmarks, website icons, and cookies may have been updated, and the new versions backed-up. If you're interested, see #A2 for a way to see exactly what's getting backed-up.
    Does the #A4 process only reset the 'Select Disk' & 'Options' preferences?
    Those are the main ones, but TM keeps some other things in its preferences file, too, mostly so it doesn't have to look them up every hour when it does a backup.
    With that I will thank you for your help and consider my question answered and the original problem solved
    Yay! Glad it's sorted out.
    not to mention a huge gap filled in my understanding of Time Machine. Your website is a very valuable resource and should be well read by any Mac owner using Time Machine.
    Thanks very much for the kind words.

  • Trying to export RAW originals from Aperature 3 to LightRoom 4: I choose File Export Originals. I think then Pictures LR. But then I can't find files in LR library.Files seem stuck in Pictures as NEF

    Trying to export RAW originals from Aperature 3 to LightRoom 4: I choose File>Export>Originals. Then Pictures>LR. But then I can't find files in LR library.Files seem stuck in Pictures as NEF and or DNG files. I know Im stuck on something dumb but I am stuck. Help?

    You now need to import those files into Lightroom.
    BTW, Lightroom uses a "referenced" system so your images will always be in the folders you download/copy them to. Lightroom is a database first and foremost, albeit with non-destructive editing capabilities (effectively Adobe Camera Raw).

  • File is stuck at 30% when opening

    Hi,
    I have created a Captivate 5 project on one PC and have tried to transfer this to another PC to work from their. However when I try to open the CPTX file it gets stuck at 30% and then gives me an error message asking me to chekc if the file has corrupted or the PC has enough resources.
    Can anyone help me to try and fix this.
    I have tried to transfer it using a memory stick, CD and via the network.

    OK. If you are able to open the original CPTX project file on the original PC, your issue may be due to the lock file that Captivate normally creates when opening projects.
    Make sure you successfully close down the CPTX file and then browse to it's file location in Windows Explorer.  See if there are any files at that location with the same name as the project file but with a slightly different ending to indicate they are a locking file.  If so, delete the locking file, then try copying the CPTX file using Windows Explorer to your chip, and then from there to the other PC where you need to work on it.  Don't work off the chip.  Copy the project file to the hard drive of the computer where you need to work on it.

  • In downloading a TV show from iTunes to my PC the file is stuck in processing and never completes the download

    When downloading a purchased TV show from the Itunes store to my PC (Windows 7) the file is stuck in processing and never completes the download.

    The EXACT same thing happened to me last night!  Rented a movie; it had barely started and then froze.  When I touch the video app icon, all I get is a blank, dimly lit screen.  None of the other videos I own will display either.  Was your problem ever resolved?

Maybe you are looking for