File System Listener

Hi all, I want to work on my MsWindows file system but dont know which class to start looking. More specifically, is it possible to have a listener responding to file system events like file delete, move, create?
Many thanks for your time...Peter

Look into the api http://java.sun.com/j2se/1.4/docs/api/ and check out the File class it has stuff in there like file delete and so on also look into FileReader,FileWriter etc.To move files like drage n drop you need to look into the java.awt.dnd and datatranfer. good luck

Similar Messages

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Not able to run adadmin adfter installing R12 Upgrade file system

Sawwan,
Now we are doing 11i apps to R12 upgrade single node, before we did database upgrade 9i to 10.2.0.4,
I successfully installed R12 upgrade file system with out any errors, i have chagned the
new Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
i moved the new environment file into .bash_profile
mv .bash_profile .bash_profile_11.5.10
Iset the R12 environment , When ever i tried to run adadmin system manager password is not taking its giving error
[applupg@peabody appl]$ adadmin
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications AD Administration
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Your default directory is '/u01/R12/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AD Administration records your AD Administration session in a text file
you specify. Enter your AD Administration log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adadmin.log] :
************* Start of AD Administration session *************
AD Administration version: 12.0.0
AD Administration started at: Sat Apr 18 2009 06:12:52
APPL_TOP is set to /u01/R12/apps/apps_st/appl
Backing up restart files, if any......Done.
Your previous AD Administration session did not run to completion.
Do you wish to continue with your previous AD Administration session [Yes] ?
You are about to use or modify Oracle Applications product tables
in your ORACLE database 'upg'
using ORACLE executables in '/u01/R12/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema: manager
...Unable to connect.
AD Administration error:
The following ORACLE error:
ORA-12541: TNS:no listener
occurred while executing the SQL statement:
CONNECT SYSTEM/*****
AD Administration error:
Unable to connect to 'SYSTEM'; password may be invalid.
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
Enter the password for your 'SYSTEM' ORACLE schema:
Before running R12 adadmin is there nessary 11i apps servicess should up or down..
Edited by: HumanDBA on May 5, 2009 12:26 PM

Sawwan,
As a oracle user i am able to see the tns_admin home dir
[oraupg@peabody upg_peabody]$ echo $TNS_ADMIN
/stage/10gsoftware/network/admin/upg_peabody
[oraupg@peabody upg_peabody]$
After installing R12 uprade file system i am able do the tnsping
[applupg@peabody appl]$ tnsping upg
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 18-APR-2009 06:26:49
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=peabody)(PORT=1526)) (CONNECT_DATA=(SID=upg)))
TNS-12541: TNS:no listener
[applupg@peabody appl]$
[applupg@peabody appl]$ sqlplus apps/xxxx@upg
SQL*Plus: Release 10.1.0.5.0 - Production on Sat Apr 18 06:29:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name:
========================================
Sawwan
after installing i am trying to apply R12.AD.B patch, do we need to apply this patch in 11i fiile system or New R12 file system, for 11i file system i am not getting any issue, but when ever i set the R12 new file system enviroment file then only i am not able to connect the database,i have changed new port numbers in R12 file system, is that causing any issues..?
Edited by: HumanDBA on May 5, 2009 12:37 PM

Intermedia text search error for file system

I would like to search a text from a file. store in the file system. I have done the following procedures but when i create i get error.
BEGIN
CTX_DDL.CREATE_PREFERENCE('search_docroot_pref','FILE_DATASTORE');
CTX_DDL.SET_ATTRIBUTE('search_docroot_pref','path','c:/temp/abc');
END;
Now when i create INDEX with following syntex
CREATE INDEX mysearch_ind ON mytable(mycolumn) INDEXTYPE IS
CTXSYS.context parameters('datastore search_docroot_pref');
I get the following errors.
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: interMedia Text error:
DRG-50704: Net8 listener is not running or cannot start external procedures
ORA-28575: unable to open RPC connection to external procedure agent
ORA-06512: at "CTXSYS.DRUE", line 126
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 54
ORA-06512: at line 1
Can any body tell me where i am wrong.
Thanks,

Hi
I was aslo facing same problem.My net8 connection and listner is aslo ok. but getting same errors.
Raju

Every boot requires fsck. Makes file system read-only

Suddenly when I booted my Arch I got a message saying that there was a corruption in my /home and /var directories. The same message suggested to pass fsck as solution. The booting process hanged there without entering to the emergency login. I took a live cd an executed a fsck in all my ext4 file system and “repaired” the problem.
When I could log into the system if, for example, I want to write a file o do any operation (sudo for example) I get the message:
sudo: unable to open /var/db/sudo/lola/0: Read-only file system
If I reboot the PC again, the cycle begins again, this is: errors, asking for fsck, then, read-only FS.
Some info that you may find useful:
fstab
/dev/sda3 / ext4 defaults 0 1
/dev/sda5 /var ext4 defaults 0 1
/dev/sda6 swap swap defaults 0 0
/dev/sda7 /home ext4 defaults,user_xattr 0 1
df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 15G 7.2G 6.6G 52% /
dev 1.9G 0 1.9G 0% /dev
run 1.9G 740K 1.9G 1% /run
/dev/sda3 15G 7.2G 6.6G 52% /
tmpfs 1.9G 536K 1.9G 1% /dev/shm
tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
tmpfs 1.9G 80K 1.9G 1% /tmp
/dev/sda7 80G 39G 37G 52% /home
/dev/sda5 6.8G 3.7G 2.8G 58% /var
/dev/sda2 358G 334G 25G 94% /media/windows
systemctl
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Au
sys-devices-pci...000:00:1b.0-sound-card0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1b.0/sound/card0
sys-devices-pci...0-0000:02:00.0-net-eth0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.
sys-devices-pci...-0000:03:00.0-net-wlan0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.
sys-devices-pci...-1:0:0:0-block-sda-sda1.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...-1:0:0:0-block-sda-sda2.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...-1:0:0:0-block-sda-sda3.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...-1:0:0:0-block-sda-sda4.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...-1:0:0:0-block-sda-sda5.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...-1:0:0:0-block-sda-sda6.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...-1:0:0:0-block-sda-sda7.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...1:0:0-1:0:0:0-block-sda.device loaded active plugged TOSHIBA_MK5055GSX
sys-devices-pci...5:0:0-5:0:0:0-block-sr0.device loaded active plugged TSSTcorp_CDDVDW_TS-L633C
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
tail -100 /var/log/errors.log
Jan 23 14:43:52 localhost kernel: [ 283.449542] ata2.00: error: { UNC }
Jan 23 14:43:52 localhost kernel: [ 283.451224] end_request: I/O error, dev sda, sector 513442820
Jan 23 14:43:52 localhost kernel: [ 283.451228] Buffer I/O error on device sda2, logical block 63796096
Jan 23 14:43:56 localhost kernel: [ 287.394421] ata2.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
Jan 23 14:43:56 localhost kernel: [ 287.394426] ata2.00: irq_stat 0x40000001
Jan 23 14:43:56 localhost kernel: [ 287.394430] ata2.00: failed command: READ FPDMA QUEUED
Jan 23 14:43:56 localhost kernel: [ 287.394435] ata2.00: cmd 60/08:00:00:84:9a/00:00:1e:00:00/40 tag 0 ncq 4096 in
Jan 23 14:43:56 localhost kernel: [ 287.394435] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
Jan 23 14:43:56 localhost kernel: [ 287.394438] ata2.00: status: { DRDY ERR }
Jan 23 14:43:56 localhost kernel: [ 287.394440] ata2.00: error: { UNC }
Jan 23 14:43:56 localhost kernel: [ 287.394442] ata2.00: failed command: READ FPDMA QUEUED
Jan 23 14:43:56 localhost kernel: [ 287.394447] ata2.00: cmd 60/00:08:1f:53:4d/01:00:2d:00:00/40 tag 1 ncq 131072 in
Jan 23 14:43:56 localhost kernel: [ 287.394447] res 41/40:02:04:84:9a/00:00:1e:00:00/4e Emask 0x9 (media error)
Jan 23 14:43:56 localhost kernel: [ 287.394449] ata2.00: status: { DRDY ERR }
Jan 23 14:43:56 localhost kernel: [ 287.394451] ata2.00: error: { UNC }
Jan 23 14:43:56 localhost kernel: [ 287.394453] ata2.00: failed command: WRITE FPDMA QUEUED
Jan 23 14:43:56 localhost kernel: [ 287.394458] ata2.00: cmd 61/08:10:7f:6e:b7/00:00:30:00:00/40 tag 2 ncq 4096 out
Jan 23 14:43:56 localhost kernel: [ 287.394458] res 41/40:02:04:84:9a/00:00:1e:00:00/4e Emask 0x9 (media error)
Jan 23 14:43:56 localhost kernel: [ 287.394460] ata2.00: status: { DRDY ERR }
Jan 23 14:43:56 localhost kernel: [ 287.394462] ata2.00: error: { UNC }
Jan 23 14:43:56 localhost kernel: [ 287.394464] ata2.00: failed command: WRITE FPDMA QUEUED
Jan 23 14:43:56 localhost kernel: [ 287.394468] ata2.00: cmd 61/90:18:37:42:31/00:00:35:00:00/40 tag 3 ncq 73728 out
Jan 23 14:43:56 localhost kernel: [ 287.394468] res 41/40:02:04:84:9a/00:00:1e:00:00/4e Emask 0x9 (media error)
Jan 23 14:43:56 localhost kernel: [ 287.394471] ata2.00: status: { DRDY ERR }
Jan 23 14:43:56 localhost kernel: [ 287.394472] ata2.00: error: { UNC }
Jan 23 14:43:56 localhost kernel: [ 287.396122] end_request: I/O error, dev sda, sector 513442820
Jan 23 14:43:56 localhost kernel: [ 287.396125] Buffer I/O error on device sda2, logical block 63796096
Jan 23 14:43:56 localhost kernel: [ 287.396179] end_request: I/O error, dev sda, sector 760042271
Jan 23 14:43:56 localhost kernel: [ 287.396232] end_request: I/O error, dev sda, sector 817327743
Jan 23 14:43:56 localhost kernel: [ 287.396235] Buffer I/O error on device sda7, logical block 1133175
Jan 23 14:43:56 localhost kernel: [ 287.396282] end_request: I/O error, dev sda, sector 892420663
Jan 23 14:44:01 localhost kernel: [ 291.317005] ata2.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
Jan 23 14:44:01 localhost kernel: [ 291.317010] ata2.00: irq_stat 0x40000008
Jan 23 14:44:01 localhost kernel: [ 291.317014] ata2.00: failed command: READ FPDMA QUEUED
Jan 23 14:44:01 localhost kernel: [ 291.317019] ata2.00: cmd 60/08:08:00:84:9a/00:00:1e:00:00/40 tag 1 ncq 4096 in
Jan 23 14:44:01 localhost kernel: [ 291.317019] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
Jan 23 14:44:01 localhost kernel: [ 291.317022] ata2.00: status: { DRDY ERR }
Jan 23 14:44:01 localhost kernel: [ 291.317024] ata2.00: error: { UNC }
Jan 23 14:44:01 localhost kernel: [ 291.318643] end_request: I/O error, dev sda, sector 513442820
Jan 23 14:44:01 localhost kernel: [ 291.318647] Buffer I/O error on device sda2, logical block 63796096
Jan 23 14:44:01 localhost kernel: [ 291.546162] Aborting journal on device sda7-8.
Jan 23 14:54:20 localhost [ 7.837917] systemd[1]: Socket service syslog.service not loaded, refusing.
Jan 23 14:54:20 localhost [ 7.838515] systemd[1]: Failed to listen on Syslog Socket.
Jan 23 14:54:21 localhost kernel: [ 10.930157] [drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value
Jan 23 14:54:34 localhost dhcpcd[564]: dhcpcd not running
Jan 23 14:54:35 localhost dhcpcd[649]: dhcpcd not running
Jan 23 14:54:35 localhost dhcpcd[662]: dhcpcd not running
Jan 23 14:58:04 localhost su: pam_unix(su:auth): conversation failed
Jan 23 17:00:38 localhost systemd[1]: Failed to start Netcfg multi-profile daemon.
Jan 23 17:00:39 localhost [ 7.790297] systemd[1]: Socket service syslog.service not loaded, refusing.
Jan 23 17:00:39 localhost [ 7.790891] systemd[1]: Failed to listen on Syslog Socket.
Jan 23 17:00:39 localhost kernel: [ 11.363432] [drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value
Jan 23 17:00:55 localhost dhcpcd[612]: dhcpcd not running
Jan 23 17:00:55 localhost dhcpcd[618]: dhcpcd not running
Jan 23 17:00:55 localhost dhcpcd[626]: dhcpcd not running
Jan 23 17:01:23 localhost su: pam_unix(su:auth): conversation failed
Jan 23 17:04:55 localhost kernel: [ 274.346016] ata2.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
Jan 23 17:04:55 localhost kernel: [ 274.346022] ata2.00: irq_stat 0x40000008
Jan 23 17:04:55 localhost kernel: [ 274.346025] ata2.00: failed command: READ FPDMA QUEUED
Jan 23 17:04:55 localhost kernel: [ 274.346031] ata2.00: cmd 60/70:08:e8:83:9a/00:00:1e:00:00/40 tag 1 ncq 57344 in
Jan 23 17:04:55 localhost kernel: [ 274.346031] res 41/40:70:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
Jan 23 17:04:55 localhost kernel: [ 274.346034] ata2.00: status: { DRDY ERR }
Jan 23 17:04:55 localhost kernel: [ 274.346035] ata2.00: error: { UNC }
Jan 23 17:04:55 localhost kernel: [ 274.348151] end_request: I/O error, dev sda, sector 513442820
Jan 23 17:04:55 localhost kernel: [ 274.348154] Buffer I/O error on device sda2, logical block 63796096
Jan 23 17:04:55 localhost kernel: [ 274.348159] Buffer I/O error on device sda2, logical block 63796097
Jan 23 17:04:55 localhost kernel: [ 274.348162] Buffer I/O error on device sda2, logical block 63796098
Jan 23 17:04:55 localhost kernel: [ 274.348164] Buffer I/O error on device sda2, logical block 63796099
Jan 23 17:04:55 localhost kernel: [ 274.348166] Buffer I/O error on device sda2, logical block 63796100
Jan 23 17:04:55 localhost kernel: [ 274.348168] Buffer I/O error on device sda2, logical block 63796101
Jan 23 17:04:55 localhost kernel: [ 274.348171] Buffer I/O error on device sda2, logical block 63796102
Jan 23 17:04:55 localhost kernel: [ 274.348173] Buffer I/O error on device sda2, logical block 63796103
Jan 23 17:04:55 localhost kernel: [ 274.348176] Buffer I/O error on device sda2, logical block 63796104
Jan 23 17:04:55 localhost kernel: [ 274.348178] Buffer I/O error on device sda2, logical block 63796105
Jan 23 17:04:59 localhost kernel: [ 278.257533] ata2.00: exception Emask 0x0 SAct 0x84 SErr 0x0 action 0x0
Jan 23 17:04:59 localhost kernel: [ 278.257539] ata2.00: irq_stat 0x40000008
Jan 23 17:04:59 localhost kernel: [ 278.257543] ata2.00: failed command: READ FPDMA QUEUED
Jan 23 17:04:59 localhost kernel: [ 278.257549] ata2.00: cmd 60/08:38:00:84:9a/00:00:1e:00:00/40 tag 7 ncq 4096 in
Jan 23 17:04:59 localhost kernel: [ 278.257549] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
Jan 23 17:04:59 localhost kernel: [ 278.257551] ata2.00: status: { DRDY ERR }
Jan 23 17:04:59 localhost kernel: [ 278.257553] ata2.00: error: { UNC }
Jan 23 17:04:59 localhost kernel: [ 278.259233] end_request: I/O error, dev sda, sector 513442820
Jan 23 17:05:03 localhost kernel: [ 282.157929] ata2.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x0
Jan 23 17:05:03 localhost kernel: [ 282.157934] ata2.00: irq_stat 0x40000008
Jan 23 17:05:03 localhost kernel: [ 282.157938] ata2.00: failed command: READ FPDMA QUEUED
Jan 23 17:05:03 localhost kernel: [ 282.157943] ata2.00: cmd 60/08:10:00:84:9a/00:00:1e:00:00/40 tag 2 ncq 4096 in
Jan 23 17:05:03 localhost kernel: [ 282.157943] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
Jan 23 17:05:03 localhost kernel: [ 282.157946] ata2.00: status: { DRDY ERR }
Jan 23 17:05:03 localhost kernel: [ 282.157947] ata2.00: error: { UNC }
Jan 23 17:05:03 localhost kernel: [ 282.159582] end_request: I/O error, dev sda, sector 513442820
Jan 23 17:05:03 localhost kernel: [ 282.159588] Buffer I/O error on device sda2, logical block 63796096
Jan 23 17:05:07 localhost kernel: [ 286.069482] ata2.00: exception Emask 0x0 SAct 0x40 SErr 0x0 action 0x0
Jan 23 17:05:07 localhost kernel: [ 286.069487] ata2.00: irq_stat 0x40000008
Jan 23 17:05:07 localhost kernel: [ 286.069491] ata2.00: failed command: READ FPDMA QUEUED
Jan 23 17:05:07 localhost kernel: [ 286.069496] ata2.00: cmd 60/08:30:00:84:9a/00:00:1e:00:00/40 tag 6 ncq 4096 in
Jan 23 17:05:07 localhost kernel: [ 286.069496] res 41/40:08:04:84:9a/00:00:1e:00:00/6e Emask 0x409 (media error) <F>
Jan 23 17:05:07 localhost kernel: [ 286.069499] ata2.00: status: { DRDY ERR }
Jan 23 17:05:07 localhost kernel: [ 286.069501] ata2.00: error: { UNC }
Jan 23 17:05:07 localhost kernel: [ 286.071955] end_request: I/O error, dev sda, sector 513442820
Jan 23 17:05:07 localhost kernel: [ 286.071959] Buffer I/O error on device sda2, logical block 63796096
Waiting for your help.
Thank you.

oh god, if my HD dies I will kill myself.
I did the SMART, short and long (following the ArchWiki) and got (will post the long as soon it ends):
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7967 -
With more details:
smartctl -a /dev/sda
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.6.9-1-ARCH] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..55GSX
Device Model: TOSHIBA MK5055GSX
Serial Number: 897JC07RT
LU WWN Device Id: 5 000039 1f3c01f05
Firmware Version: FG001M
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Jan 23 13:46:24 2013 PYST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 183) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1320
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1807
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 7
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 7967
10 Spin_Retry_Count 0x0033 136 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1789
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 97
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 33
193 Load_Cycle_Count 0x0032 082 082 000 Old_age Always - 189405
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Min/Max 9/50)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 9
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 87
222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6001
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 320
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 634 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 634 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 41 02 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
60 08 00 00 84 9a 40 08 03:31:25.735 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 03:31:25.714 FLUSH CACHE EXT
61 18 08 07 82 b1 40 08 03:31:25.714 WRITE FPDMA QUEUED
61 08 00 0f 7d 31 40 08 03:31:25.714 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 03:31:25.682 FLUSH CACHE EXT
Error 633 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 41 02 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
60 08 00 00 84 9a 40 08 03:31:21.832 READ FPDMA QUEUED
61 18 00 27 81 b1 40 08 03:31:21.451 WRITE FPDMA QUEUED
61 18 00 27 77 b1 40 08 03:31:20.425 WRITE FPDMA QUEUED
61 18 00 2f 8c b1 40 08 03:31:19.451 WRITE FPDMA QUEUED
61 18 00 ef 81 b1 40 08 03:31:18.445 WRITE FPDMA QUEUED
Error 632 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 41 0a 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
60 00 00 07 7f 09 40 08 03:16:43.581 READ FPDMA QUEUED
60 08 08 00 84 9a 40 08 03:16:43.559 READ FPDMA QUEUED
60 00 00 a7 5b 09 40 08 03:16:43.552 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 03:16:43.551 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 03:16:43.551 READ NATIVE MAX ADDRESS EXT
Error 631 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 41 0a 04 84 9a 6e Error: UNC at LBA = 0x0e9a8404 = 245007364
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
60 00 00 a7 5b 09 40 08 03:16:39.713 READ FPDMA QUEUED
60 08 00 87 b5 25 40 08 03:16:39.705 READ FPDMA QUEUED
60 00 00 8f 60 05 40 08 03:16:39.693 READ FPDMA QUEUED
60 08 00 e7 d4 54 40 08 03:16:39.692 READ FPDMA QUEUED
60 08 08 00 84 9a 40 08 03:16:39.678 READ FPDMA QUEUED
Error 630 occurred at disk power-on lifetime: 7967 hours (331 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
40 41 12 04 84 9a 6e Error: WP at LBA = 0x0e9a8404 = 245007364
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
61 08 08 0e 4c b6 40 08 03:16:35.710 WRITE FPDMA QUEUED
61 08 08 0e 4c b6 40 08 03:16:35.710 WRITE FPDMA QUEUED
61 08 08 0e 4c b6 40 08 03:16:35.709 WRITE FPDMA QUEUED
61 98 18 8f 41 31 40 08 03:16:35.709 WRITE FPDMA QUEUED
61 08 08 0e 4c b6 40 08 03:16:35.708 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7967 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Is there an equivalent to Solaris iostat -En in Linux? Havent found any. Remember that I can't install anything: read-only FS
Last edited by gromlok (2013-01-23 16:47:35)

SAP ECC 6.0 file system Restore

Dear Friends,
Happy Holi.
I have restore file system backup of our development server to another host having oracle 10g and ECC 6.0.
After restore database has been up successfully.
But listner is not running when I trid to run listner it is giving the error as below.
jkeccbc:oradvr 2> lsnrctl start
LSNRCTL for HPUX: Version 10.2.0.2.0 - Production on 19-MAR-2011 15:18:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /oracle/DVR/102_64/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 10.2.0.2.0 - Production
System parameter file is /oracle/DVR/102_64/network/admin/listener.ora
Log messages written to /oracle/DVR/102_64/network/log/listener.log
Error listening on: (ADDRESS=(PROTOCOL=IPC)(KEY=DVR.WORLD))
TNS-12557: TNS:protocol adapter not loadable
TNS-12560: TNS:protocol adapter error
TNS-00527: Protocol Adapter not loadable
Listener failed to start. See the error message(s) above...
Regards
Ganesh Datt Tiwari

Hi Mark,
Please find below
cat listener.ora
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = DVR.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
         (KEY = DVR)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST =jkeccbc)
          (PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = DVR)
      (ORACLE_HOME = /oracle/DVR/102_64)
===========================================
cat tnsnames.ora
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
DVR.WORLD=
(DESCRIPTION =
    (ADDRESS_LIST =
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = jkeccbc)
          (PORT = 1527)
    (CONNECT_DATA =
       (SID = DVR)
       (GLOBAL_NAME = DVR.WORLD)
Regards
Ganesh Datt Tiwari

Reorganization of wily Introscope data on file system level

Hello.
The central repository for Wily Introscope performance data is supposed to be on /usr/sap/ccms, on Solution Manager server.
Does anyone knows if there is a procedure to avoid this file system to grow too much? or if there are any estimation about the size this directory could reach?
Kind regards,
Fermín Álvarez

Hi,
I am also facing the same issue while starting Introscope Entraprise Manager. i.e " port already in use:8081 change the property introscope.entraprisemanger.webserver.port "
If I check the for Introscope service
bash-3.00# ps -ef | grep Intro
sm1adm 12666 12662   0 11:52:07 ?           0:00 /usr/dt/bin/dthelpview -helpVolume Intromgr
    root 12817 10056   0 12:04:21 pts/1       0:00 grep Intro
And following is the output for port 8081
bash-3.00# netstat -a | grep 8081
      *.8081               .                0      0 49152      0 LISTEN
Please tell me how to rectify the issue..
Thanks & Regards
Amair

Database shut down and file systems are still busy

We have been copying our production DB over to a reporting DB for the last 3 years. The process we use on the reporting database is: shutdown the DB ABORT, restart it, then shutdown immediate. Then we umount the file systems and copy the production over using a Flex Clone on the NETAPP, remount the file systems and start the database back up. We used to shut down the listener which does not share the oracle binaries on the unix system but lately have left the listener up because other DB's use it. Every so often after shutting down the report database in prep for the copy, the file system that contains the binaries is busy and we can't unmount the ORACLE binaries.
So my question is how does the listener know if the database is up or down? Is it reading something on the volumes we're trying to unmount to see if the database is up? We have users that schedule jobs in odd hours and was wondering if them hitting the listener and even though the database is down it's making the file systems busy?
Any help is appreciated.

Mi**** wrote:
So my question is how does the listener know if the database is up or down? If/when the DB responds, then the listener knows it is up;
otherwise listener reports error to client
Is it reading something on the volumes we're trying to unmount to see if the database is up? We have users that schedule jobs in odd hours and was wondering if them hitting the listener and even though the database is down it's making the file systems busy?
Listener is NEVER involved with any ongoing packet exchange between client & the DB.
Listener takes original connection request & if the DB is up passes the request to the DB.
After this initial handoff, the listener has NO more involvement with packet exchange between DB & client

File System or BLOB

Hi,
I have wrote an application and all works well. I was wondering what peoples views are on the BLOB in Database vs File System argument? I have gone for the BLOB method as I like the security and ease of it. What I don't like is the more the system is used, my hosting costs begin to rise!! :(
How is everyone else handling files in their systems? Will the introduction of APERX 4.0 with the new listener have any impact on your decision (I read it has better file handling but I have not investigated too much)?
Just looking for a bit of guidance on which way is the Best Practise for this.
Thanks
Richard

Best thing that could be said.. Read this thread on Asktom.com and your questions should be answered..:http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1011065100346196442
Thank you,
Tony Miller
Webster, TX

Note on applying patches to the file system and database

Dear all,
I am new to Oracle E-business suite. Anyone in the house that can give a note (either a step by step or oracle metalink note) on how to apply patches to a file system or database.
Kind Regards.

Hi,
Steps to apply an application patch:
- Stop all application services (keep the database and the database listener up and running)
- Download the patch from Metalink
- Copy the patch file to any directory (i.e. /u04/patches)
- As 'applmgr' do the following:
- Source the environment file
- $ cd /u04/patches
- Type 'unzip <patch_number>.zip'
- cd <patch_number>
- Type 'adpatch'
- When it prompts you to enter the patch driver, type 'u<patch_number>.drv'
Apply the patch on the database tier first then on the application tier.
Do not forget to 'Enable Maintenance Mode' from adadmin before applying the patch. Once you apply the patch successfully, 'Disable Maintenance Mode' from adadmin.
And, always follow the steps in the patch README file.
For database patches, follow the steps in the patch README file and apply the patch using opatch as oracle user.
For more details about applying patches, please refer to:
"Oracle Applications Maintenance Utilities" manual
http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
How to apply EBS 12i pathces in both Linux and Windows
Re: How to apply EBS 12i pathces in both Linux and Windows
Need to apply patch!
Need to apply patch!
Regards,
Hussein

File System Watcher of Powershell on Opening a Folder

Sorry for double post, since my last post is posted in wrong place.
I am trying to build a file system watcher on my computer with Windows 7. I am using FileSystemWatcher of Powershell, it works quite good! I can monitor file/folder creating, deleting, renaming and file changing, including all files and folders in subfolders.
But when I want to monitor the situation that user opens a folder, for example by double clicking, I cannot find any event listeners in Powershell for that, but it is quite important for my file system watcher.
Does Powershell have this kind of event listener for getting the event of opening a folder? Or is there another better way to do it?
Thanks!

You can do that.
Just be prepared for the possibility that this could potentially generate a huge number of events, and as a result those logs could wrap very quickly and there may be a noticeable degradation in performance from the processor and disk I/O overhead
required to do that logging.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Cache of a File System

Would appreciate it if someone could validate my thought process:
I'm looking to put together a large distributed cache and use the file system (shared by all cluster nodes) as long-term storage. My approach has been to: use a distributed scheme with POF serialization, and to create a custom cache store in order to write-behind to Berkeley db
In order to speed up the process of seeding/bulk-loading the cache at start-up I thought that it would be a good idea to partition the data and to write to different files/directories based on my own fairly primitive partitioning strategy, and then to load the data similar to this example: [Performing Distributed Bulk Loading|http://coherence.oracle.com/display/COH35UG/Pre-Loading+the+Cache#Pre-LoadingtheCache-PerformingDistributedBulkLoading]
I later realized that coherence also provides a bdb-store-manager.
My question is:
1. Does the overall approach make sense? I'd like to optimize this as much as possible so if you can think of a better/faster way then please let me know
2. Can I achieve the same by just using the bdb-store-manager and not implementing my own Cache Store?
Thanks,
Kevin

user10766240 wrote:
Would appreciate it if someone could validate my thought process:
I'm looking to put together a large distributed cache and use the file system (shared by all cluster nodes) as long-term storage. My approach has been to: use a distributed scheme with POF serialization, and to create a custom cache store in order to write-behind to Berkeley db
You have to have a separate Berkeley DB for each partition they need to be "mounted" and "unmounted" when partitions move between nodes.
You also have to write a partition listener handling the PARTITION_TRANSFER_* events with "mounting" and "unmounting" the per-partition Berkeley DB instance appropriately as the partition is transferred.
In order to speed up the process of seeding/bulk-loading the cache at start-up I thought that it would be a good idea to partition the data and to write to different files/directories based on my own fairly primitive partitioning strategy, and then to load the data similar to this example: [Performing Distributed Bulk Loading|http://coherence.oracle.com/display/COH35UG/Pre-Loading+the+Cache#Pre-LoadingtheCache-PerformingDistributedBulkLoading]
It should be possible to adapt that example to your needs, e.g. get the keys for all entries in the same partition should be fairly easy by going to the appropriate per-partition BDB instance.
I later realized that coherence also provides a bdb-store-manager.
My question is:
1. Does the overall approach make sense? I'd like to optimize this as much as possible so if you can think of a better/faster way then please let me knowYes.
2. Can I achieve the same by just using the bdb-store-manager and not implementing my own Cache Store?
Thanks,
KevinNo. The BDB store manager is not able to initialize the cache from a non-empty BDB database. It recreates an empty BDB database on restart, thereby you would lose all your data before you could have preloaded it, even if you could configure the BDB store manager to access your data files.
Best regards,
Robert

"file system error" shows on my ZEN NE

hi..i see you are really good in solving creative problems.i just bought zen neeon 6gb and it is not up to 4weeks.i discovered that it frozes most time i listen to it after some minutes then i decided to format it.i used windows format and it gave a message'windows unable to format'. now my laptop doesnt reads the player and when i on the player its shows"file system error" and swicthes off it self.please help me out.i saved alot to get this player.be expecting your reply asap
my email is [email protected]

Welcome to the world of processor-controlled gadgets. To get the best out of your product you are going to need to learn about things such as firmware - try Wikipedia for a description. Anyway, go to Support->Downloads and choose the Nano Plus from the lists. On the next page is a section for firmware - download the firmware file to your PC then connect your player and run the firmware file. During the process you will see a Format Data Area check box - you need to tick this box and continue. PB

Remote file event listener

Is there an API to listen/monitor event changes on a file on remote machine in JDK 5 or JDK 6 ?

[http://www.google.com/search?hl=en&source=hp&q=java+file+system+watcher]
led me to this:
[http://java.sun.com/developer/technicalArticles/javase/nio/]
Oh, wait you're restricting it to 1.5 or 1.6. Then no, not built in. Others have apparantly implemented them though (from the first google search).

C100 sport.. file system er

After 2 weeks of use, my player says 'file system error' when i turn it on then shuts down. I yet to try to download music and was happy listening to fm radio.. batteries are ok.. need help. where they support toll free telephone#.

Is it a MuVo? If so, try the recovery process and update the firmware. Download the driver and firmware from http://www.nomadworld.com/downloads/drivers. Install the driver file. After you have installed the driver, press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file and check/tick the 'Format Data Area' check box and click on 'Start'.

File System Listener

Similar Messages

Maybe you are looking for