Files aren't showing on another node in newly created ocfs2 partition

Hi Guys,
Configured /u01 as ocfs2 partition for shared storage on OEL5U4 (64 bit)
[root@ebs1 u01]# /etc/init.d/ocfs2 status
Configured OCFS2 mountpoints: /u01
Active OCFS2 mountpoints: /u01
[root@ebs1 u01]# /etc/init.d/o2cb status
Driver for "configfs": Loaded
Filesystem "configfs": Mounted
Driver for "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster ocfs2: Online
Heartbeat dead threshold = 31
Network idle timeout: 30000
Network keepalive delay: 2000
Network reconnect delay: 2000
Checking O2CB heartbeat: Active
[root@ebs1 u01]# mounted.ocfs2 -f
Device                FS     Nodes
/dev/sdb1             ocfs2 ebs1
[root@ebs2 u01]# /etc/init.d/ocfs2 status
Configured OCFS2 mountpoints: /u01
Active OCFS2 mountpoints: /u01
[root@ebs2 u01]# /etc/init.d/o2cb status
Driver for "configfs": Loaded
Filesystem "configfs": Mounted
Driver for "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster ocfs2: Online
Heartbeat dead threshold = 31
Network idle timeout: 30000
Network keepalive delay: 2000
Network reconnect delay: 2000
Checking O2CB heartbeat: Active
[root@ebs2 u01]# mounted.ocfs2 -f
Device                FS     Nodes
/dev/sdb1             ocfs2 ebs2
]# cat /etc/fstab [On Both Nodes]
LABEL=/                 /                       ext3    defaults        1 1
LABEL=/boot             /boot                   ext3    defaults        1 2
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts gid=5,mode=620 0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
LABEL=SWAP-sda2         swap                    swap    defaults        0 0
/dev/sdb1              /u01                    ocfs2   _netdev,datavolume     0 0
Also tried to mount /u01 with 'nointr' but no luck,
[root@ebs2 u01]# touch a z
total 0
drwxrwxr-x 2 applmgr oinstall 3896 Jan 17 04:49 lost+found
drwxrwxr-x 3 applmgr oinstall 3896 Jan 17 05:24 app
-rw-r--r-- 1 root    root        0 Jan 17 08:29 a
-rw-r--r-- 1 root    root        0 Jan 17 08:37 z
[root@ebs1 u01]# touch b r
[root@ebs1 u01]# ls -lrt
total 0
drwxr-xr-x 2 root root 3896 Jan 17 08:33 lost+found
-rw-r--r-- 1 root root    0 Jan 17 08:34 b
-rw-r--r-- 1 root root    0 Jan 17 08:37 r
So Basically files are not showing in each /u01 common mount point.
Any help would be appreciated...
Thanks,
Manish Nashikkar

ya...I had shared /dev/sdb disk across these 2 nodes, but somehow running blkid command was showing different UUID and which cleared my doubts...Thanks for your help...
[root@ebs1 ~]# blkid
/dev/sda3: LABEL="/" UUID="f1e8fb9e-8a33-46e3-8fec-3a1f405c341c" TYPE="ext3"
/dev/sda2: LABEL="SWAP-sda2" TYPE="swap"
/dev/sda1: LABEL="/boot" UUID="451e7b50-c0df-4ec0-9c00-7ff2bc3da665" TYPE="ext3"
/dev/sdb1: LABEL="oracle" UUID="2f7c2fc0-7ac9-4d63-be22-fbd9a21c0380" TYPE="ocfs2"
[root@ebs2 ~]# blkid
/dev/sda3: LABEL="/" UUID="f1e8fb9e-8a33-46e3-8fec-3a1f405c341c" TYPE="ext3"
/dev/sda2: LABEL="SWAP-sda2" TYPE="swap"
/dev/sda1: LABEL="/boot" UUID="451e7b50-c0df-4ec0-9c00-7ff2bc3da665" TYPE="ext3"
/dev/sdb1: LABEL="oracle" UUID="9dfb5065-794c-434b-9d83-48b1d5a0d44b" TYPE="ocfs2"
so I decided to detach /dev/sdb from both nodes and again attached to it. This time blkid was showing me same UUID for /dev/sdb.
Also verified using below command, (earlier below Nodes tab, only one node was appearing)
[root@ebs1 u01]# mounted.ocfs2 -f
Device FS Nodes
/dev/sdb1 ocfs2 ebs1, ebs2
Thanks,
Manish Nashikkar

Similar Messages

Swf files aren't showing up!

I have a real problem! Swf files don't seem to show up at
all! I've tried everything! At first i thought it was the path to
the file but now i reaised they just don't show up at all once i
upload the files.
If you look at the source you can see the flash file
"button1.swf" is there but why the hell isn't it showing up in the
page?
Can anyone help as this is pretty urgent! I'm working on a
job that relies on flash and nothing is showing up!
Thanks in advance
P.s. forgot to mention i'm embedding the swf file into a html
page in dreamweaver. Kinda thinking this has something to do with
it as i've just upgraded to cs3 and heard other people having the
same problem!
Can anyone help?

I have the same problem and I do have the script. I've tried
it with and without a table cell. My page is
http://www.ca1dmat.org/members.html

Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail.

Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail. Is there a fix? Also, when I tried to update, it comes up with this error.

I have a similar problem. I found out that my macbook air created a new USER with my former's computer user name. You can check that by going into System Preferences -> User & Groups, and see if a "Other user" has been created. You have to login under this new USER to find your transferred contacts in the address book.
My problem is that I do not know how to merge the 2 USER logins or transfer the data from the new USER created into the existing one.

I'm using iphoto version 8.1.2., when I try to upload pics to another web site my pics aren't showing up. What could be the problem?

I'm using iphoto 8.1.2.. When I try to upload pics to another web site the pics aren't showing up. There is nothing there to choose from. What could be the problem?

We'll need as full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on. So, step-by-step how do you go about this uploading?

Moved all my files to my portable hard drive and put them back on my computer but all downloads - music and apps - aren't showing up on my computer

I had a problem where I had to remove all of my picture, movie, and music files from my computer and now that I've put what I moved back onto my computer, I went to sync my iPod and realized that all of my previously downloaded apps and music files are not showing up in iTunes and I haven't been able to locate my apps anywhere. If I sync my iPod, will the files on my iPod transfer to iTunes or will I lose everything? I paid money for a lot of those apps and I don't want to risk losing them. Help please!!

You can transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
You can transfer non-iTunes purchased music by using a third-party program like one of thse discussed here:
Best iPod to PC

MP3 files don't show album artwork unless I move them to another directory. Why?

I am running 10.8.3.
If I navigate to a folder that has an MP3 file in it, the album art doesn't show in Finder or in Quick Look or Cover Flow. If I move that file, anywhere, it shows correctly. There is one artist that I had spelled the name incorrectly, and now that the two albums from that artist are relocated to a new folder because the name changed, the artwork is fine for them.
I have read some other threads about people having trouble embedding artwork, or it not showing up in Finder properly but the issue doesn't seem to be the same as what I am experiencing. I know the images are embedded because of the fact that when I move them around, they work perfectly.
Is there a cache that can be cleared regarding this perhaps?
Does anybody have any ideas?

If the album art is embedded in the MP3 file in an APIC frame of an id3v2 tag then the music player will display it.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Upgraded to 5.0 and now more fonts aren't showing up correctly

I had a previous problem with a colon not appearing correctly on websites and instead, I got FF 1A. Initially it looked like FF IR but FF 1A is the unicode or UTF font for that being it is a wider colon than normal.
I downloaded every font set I could find, even things that are odd shaped things I couldn't possibly ever use and the colon problem was taken care of, but then certain things in email started showing up with an FF 1A, or something else for that unicode and now that I've upgraded to 5.0, a lot more websites are showing these instead of the actual letters, numbers, or punctuation marks.
I even have Fontfinder installed but it isn't much help. I never had this problem until version 4.0.1 I don't know what else to do. I have Unicode UTF-8 for the character encoding because that is what fixed the colon problem, but now I'm having trouble with more characters.
I can't read the boxes, like I could for the colon FF 1A, but on this website
http://en.wikipedia.org/wiki/8_Man
Before each episode there are several boxes and each has a different set of numbers and letters and I zoomed in as much as I could and still can't make them out "魔女エスパー The Witch Esper" I can't tell if the first one is 98 54 or 9B 54. But there are several of these on this website, and I don't know what other fonts to try and install.
They are messed up in Internet Explorer, but most of them are just boxes with nothing in them, but I know this is support for Mozilla Firefox only and I don't really use Internet Explorer.
I can't seem to get online when someone in "Live Help" is available and there isn't a phone number to reach anyone in Support so I am very frustrated because these problems weren't happening before version 4 or 5 and I can't find any more fonts that would help. I believe "Wingdings" are automatically installed with Windows-XP, but these missing characters are supposed to be letters, numbers or punctuation marks, and they aren't showing up correctly, so windings wouldn't matter anyways and I am at my wits end.
I have never had a problem with any computer until now and I even reformatted and did every single update available for Windows-XP and even the ones that are still coming out.
For some reason below where it says
We've made some educated guesses about your current browser and operating system. When I click on "Show Details" under "installed plug-ins", it shows these
* Office Plugin for Netscape Navigator
* Adobe PDF Plug-In For Firefox and Netscape 10.1.0
* DRM Store Netscape Plugin
* DRM Netscape Network Object
But I don't know why and I doubt that is the problem. You can't even get Netscape anymore.
It's so frustrating because it is messing up reading email and doing surveys that I didn't have this problem with before using versions 4 or 5.
In my "Windows\Fonts" folder, I have 375 files over 41 MB so I don't know what to do. I'm about ready to throw the computer out the window being I can't respond properly to an email or do surveys, if I can't read the letters.
4.0.1 was was a clean install after I had to reformat a couple weeks ago but 5.0 was an update that I just did tonight.
I thank everyone in advance.
Susan

Thanks one again. I know you helped me the last to. I do have the Deja Vu font set in my folder. I downloaded and the last time. So I don't know if there is supposed to be more or not, but those were installed with Windows-XP after my reformat.
This is really driving me nuts. as I've done several re-formats on my computer and several friends computers and even upgraded hardware so I am not necessarily a software or programming expert, I am somewhat advanced when it comes to computers in general and can usually diagnose the problem but these font's are the problem and they never were before.
I did see in another forum that if you had a Dell Computer and did the Microsoft update for the onboard video card driver that it could be the culprit, but I have that disabled being I have a much better graphics card so the updates from Microsoft for the onboard video weren't installed.
It' a Dell Dimension 3000 with an Intel(R) 82865G Graphics Controller so I don't believe it is the culprit being it is disabled. The actual video card that I am using is a PCI Nvidia GeForce 9400 GT with 1 GB Memory. And I didn't have any problem before.
I appreciate the help. But still can't get things to work. Live Help Chat doesn't open for another two hours so maybe they can do "Remote Access" or something and can check setting and help me. But if you come up with other suggestions, they would be greatly appreciated.
Thanks again.
Susan

DO NOT DISCONNECT--files are in use by another application

I bought a video iPod today, and after downloading some songs from iTunes, my iPod says DO NOT DISCONNECT, but iTunes says the update is complete (but doesn't say it is OK to disconnect). When I try to eject the iPod, I eventually get the following message: "The iPod "David's iPod" cannot be ejected because it contains files that are in use by another application." I called Apple customer support and was told that they really couldn't help, because they didn't know what application was using my iPod. I disabled the anti-virus programs, but I am at a loss as to what to do next. Any suggestions?
Best regards,
David

I have this problem all the time. I've also tried disabling my antivirus. The only thing I can find that works is just try again later, and try to catch it at a moment when "the files aren't in use". I've tried enabling and disabling the "enable disk use" setting (I'm not sure it takes properly because the iPod always shows up as G: in both cases. When I have this issue, I can't use the green "Safely Remove Hardware" arrow in my task bar because Windows (XP Pro) says "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later."
I can't update to 1.2 because of this issue. Can someone please help.
P4 Celeron 2.2GHz Windows XP Pro
P4 Celeron 2.2GHz Windows XP Pro

How to avoid showing extra accessor nodes in "af:tree" component?

I work with with JDev 11.1.2.3. (ADF BC, ADF Faces stack)
I have a data structure that is hierarchical (table references itself), and another table that referneces first one.
First table contains names of containers (container can be in another container), and second table holds contents of containers.
I want to create tree that shows data from both tables.
When I create tree binding I have two accessors for first table, one with which table references itself and another accessor with which second table references the first one.
Because of that in rendered tree under each node which represents first table's row I get two extra nodes (one for each accessor).
Is it possible not to show those extra nodes but that everything is packed under the same hierarchy?
Best regards,
Nebojsa

The logic here is pretty similar to the one with folders and files. Folders are container types and files are just leaf nodes (can't contain other files).
I don't want under each folder node to have two new container nodes - one that hold other subfolders, and another one that hold just files. And that's just what I get now.
How to avoid that?
Anybody?

I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file. It says that I cannot complete this action because the file me be open in another application, but it is not open in another

I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file. I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem. Thank you. Jeff

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

My Facebook and twitter notifications aren't showing up on my iPhone 4?

My Facebook notifications aren't showing up on my iPhone 4?

What do you mean " songs aren't showing up on itunes."?
Why would songs just show up?
You can transfer itunes purchases from your ipod. Without syncing: File>Transfer Purchases
You need to copy everything from your old computer, or your backup copy of your old computer to your new one.

Move file from one library to another library via SharePoint 2010 Designer Workflow

Can SharePoint 2010 designer be able to move a file from one library to another using workflow? I tried to use the copy list item but it won't show my destination library. I prefer not to use the 3rd part workflow like
http://www.codeplex.com/SPDActivities
Please advise.
Brian
Brian

Hi Brain,
From your narration, I undersatnd that you want to move document to another library across site or site collection. However,
the copy list item action is used for coping list item to another library or list in the same site, so you can’t achieve it through ootb workflow action. So to move document to another library across site under the same site collection, then you can use site
content and structure. If across site collection, then I suggest you use that the 3<sup>rd</sup> part workflow action.
For more information about site content and structure,
http://office.microsoft.com/en-us/sharepoint-server-help/work-with-site-content-and-structure-HA010131723.aspx
Best Regards.
Kelly Chen
TechNet Community Support

Images Aren't Showing Up In Flash

My images aren't showing in my .swf file and they used to work. I was wondering what happened. Some help would be greatly appreciated. Also wondering if there is a way to save a .swf file back as a flash file, I tried recreating the work that was done prior from the flashmo file (http://www.flashmo.com/preview/flashmo_183_photo_rotator) but was unable to duplicate the look.
Below is the code (http://www.tcaexpress.com/webdevelopment_portfolio)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>TCA Productions</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css">
td img {display: block;}.white_body_text {
    font-size: 12px;
    line-height: 14px;
    color: #FFF;
    font-family: "Bell Gothic Std Black";
    text-align: left;
body {
    background-color: #492D16;
    margin-top: 0px;
    text-align: center;
.leading {
    font-family: Arial, Helvetica, sans-serif;
    font-size: 6px;
    line-height: 6px;
    color: #D6CEBB;
.body_bold {
    font-family: "Bell Gothic Std Black";
    font-size: 18px;
    color: #492D16;
    font-weight: bold;
    line-height: 18px;
.white_BOLD_text {
    font-family: "Bell Gothic Std Black";
    font-size: 18px;
    line-height: 18px;
    font-weight: bolder;
    color: #FFF;
    text-align: left;
.body_text {
    font-family: "Bell Gothic Std Black";
    font-size: 12px;
    line-height: 18px;
    color: #492D16;
    text-align: left;
.body_text_2_lines {
    font-family: "Bell Gothic Std Black";
    font-size: 12px;
    line-height: 12px;
    color: #492D16;
.body_text1 {
    font-family: "Bell Gothic Std Black";
    font-size: 12px;
    line-height: 18px;
    color: #492D16;
    text-align: left;
.leading1 {    font-family: Arial, Helvetica, sans-serif;
    font-size: 6px;
    line-height: 6px;
    color: #DBD2C0;
</style>

<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script language="JavaScript1.2" type="text/javascript">

</script>
</head>
<body onload="MM_preloadImages('images/webdevelopment_r4_c2_f2.gif','images/webdevelopment_r6_c 2_f2.gif','images/webdevelopment_r8_c2_f2.gif','images/webdevelopment_r9_c2_f2.gif')">
<table border="0" align="center" cellpadding="0" cellspacing="0" width="833">

<tr>
   <td><img src="images/spacer.gif" width="19" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="198" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="8" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="280" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="18" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="127" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="152" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="8" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="23" height="1" border="0" alt="" /></td>
   <td><img src="images/spacer.gif" width="1" height="1" border="0" alt="" /></td>
</tr>
<tr>
   <td colspan="9"><img name="webdevelopment_r1_c1" src="images/webdevelopment_r1_c1.gif" width="833" height="20" border="0" id="webdevelopment_r1_c1" alt="" /></td>
   <td><img src="images/spacer.gif" width="1" height="20" border="0" alt="" /></td>
</tr>
<tr>
   <td background="images/webdevelopment_r2_c1.gif" rowspan="8"> </td>
   <td colspan="5"><img name="webdevelopment_r2_c2" src="images/webdevelopment_r2_c2.gif" width="631" height="73" border="0" id="webdevelopment_r2_c2" usemap="#m_webdevelopment_r2_c2" alt="" /></td>
   <td colspan="2"><img name="webdevelopment_r2_c7" src="images/webdevelopment_r2_c7.gif" width="160" height="73" border="0" id="webdevelopment_r2_c7" usemap="#m_webdevelopment_r2_c7" alt="" /></td>
   <td background="images/webdevelopment_r2_c9.gif" rowspan="8"> </td>
   <td><img src="images/spacer.gif" width="1" height="73" border="0" alt="" /></td>
</tr>
<tr>
   <td background="images/webdevelopment_r3_c2.gif"> </td>
   <td rowspan="4" colspan="6"><img name="webdevelopment_r3_c3" src="images/webdevelopment_r3_c3_pf.gif" width="593" height="264" border="0" id="webdevelopment_r3_c3" alt="" /></td>
   <td><img src="images/spacer.gif" width="1" height="83" border="0" alt="" /></td>
</tr>
<tr>
   <td background="images/brown.gif"><a href="http://www.tcaexpress.com/webdevelopment" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('webdevelopment_r4_c2','','images/webdevelopment_r4_c2_f2.gif', 1)"><img name="webdevelopment_r4_c2" src="images/webdevelopment_r4_c2.gif" width="198" height="71" border="0" id="webdevelopment_r4_c2" alt="" /></a></td>
   <td><img src="images/spacer.gif" width="1" height="71" border="0" alt="" /></td>
</tr>
<tr>
   <td background="images/lightgreen.gif"><a href="webdevelopment_aboutus" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('webdevelopment_r5_c2','','images/webdevelopment_r5_c2_f2.gif', 1)"><img name="webdevelopment_r5_c2" src="images/webdevelopment_r5_c2.gif" width="198" height="71" border="0" id="webdevelopment_r5_c2" alt="" /></a></td>
   <td><img src="images/spacer.gif" width="1" height="71" border="0" alt="" /></td>
</tr>
<tr>
   <td background="images/blue.gif" rowspan="2"><a href="webdevelopment_services" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('webdevelopment_r6_c2','','images/webdevelopment_r6_c2_f2.gif', 1)"><img name="webdevelopment_r6_c2" src="images/webdevelopment_r6_c2.gif" width="198" height="72" border="0" id="webdevelopment_r6_c2" alt="" /></a></td>
   <td><img src="images/spacer.gif" width="1" height="39" border="0" alt="" /></td>
</tr>
<tr>
   <td colspan="6" rowspan="4" valign="top" background="images/webdevelopment_r3_c3_f2.gif"><table width="589" border="0" cellspacing="0" cellpadding="0">
     <tr>
       <td> </td>
       <td align="center" valign="middle"><object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="576" height="450">
         <param name="movie" value="flashmo_183_photo_rotator.swf" />
         <param name="quality" value="high" />
         <param name="wmode" value="opaque" />
         <param name="swfversion" value="9.0.45.0" />
         
         <param name="expressinstall" value="Scripts/expressInstall.swf" />
         
         
         <object type="application/x-shockwave-flash" data="flashmo_183_photo_rotator.swf" width="576" height="450">
           
           <param name="quality" value="high" />
           <param name="wmode" value="opaque" />
           <param name="swfversion" value="9.0.45.0" />
           <param name="expressinstall" value="Scripts/expressInstall.swf" />
           
           <div>
             <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
             <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
             </div>
           
           </object>
         
         </object></td>
       <td> </td>
     </tr>
    </table></td>
   <td><img src="images/spacer.gif" width="1" height="33" border="0" alt="" /></td>
</tr>
<tr>
   <td background="images/green.gif"><a href="webdevelopment_portfolio" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('webdevelopment_r8_c2','','images/webdevelopment_r8_c2_f2.gif', 1)"><img name="webdevelopment_r8_c2" src="images/webdevelopment_r8_c2.gif" width="198" height="71" border="0" id="webdevelopment_r8_c2" alt="" /></a></td>
   <td><img src="images/spacer.gif" width="1" height="71" border="0" alt="" /></td>
</tr>
<tr>
   <td background="images/yellow.gif"><a href="webdevelopment_contactus" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('webdevelopment_r9_c2','','images/webdevelopment_r9_c2_f2.gif', 1)"><img name="webdevelopment_r9_c2" src="images/webdevelopment_r9_c2.gif" width="198" height="71" border="0" id="webdevelopment_r9_c2" alt="" /></a></td>
   <td><img src="images/spacer.gif" width="1" height="71" border="0" alt="" /></td>
</tr>
<tr>
   <td height="294" background="images/webdevelopment_r10_c1.gif"> </td>
   <td align="left" valign="top" background="images/webdevelopment_r10_c2.gif"><table width="180" border="0" cellspacing="0" cellpadding="0">
     <tr>
       <td width="18"> </td>
       <td width="162" align="left" valign="top"><div>
         <p class="body_text"><span class="leading1">.</span><span class="body_bold"><br />
           I</span>f you have any questions or would like to know more about our services, we are<br />
           <span class="leading1">. </span><br />
           <span class="body_bold">Located at:</span><br />
           102 S Eastern Street<br />
           Sanborn, IA 51248<br />
           <span class="body_bold"><span class="leading1">.</span><br />
             Phone:</span><br />
           712.930.5593<br />
           <span class="leading1">.</span><br />
           <span class="body_bold">Fax:</span><br />
           712.930.5595<br />
           <span class="leading1">. </span><br />
           <span class="body_bold">Email: </span>[email protected]<span class="body_bold"><br />
             </span></p>
         </div></td>
       </tr>
   </table></td>
   <td background="images/webdevelopment_r10_c9.gif"> </td>
   <td><img src="images/spacer.gif" width="1" height="294" border="0" alt="" /></td>
</tr>
<tr>
   <td><img name="webdevelopment_r11_c1" src="images/webdevelopment_r11_c1.gif" width="19" height="53" border="0" id="webdevelopment_r11_c1" alt="" /></td>
   <td colspan="7"><img name="webdevelopment_r11_c2" src="images/webdevelopment_r11_c2.gif" width="791" height="53" border="0" id="webdevelopment_r11_c2" usemap="#m_webdevelopment_r11_c2" alt="" /></td>
   <td><img name="webdevelopment_r11_c9" src="images/webdevelopment_r11_c9.gif" width="23" height="53" border="0" id="webdevelopment_r11_c9" alt="" /></td>
   <td><img src="images/spacer.gif" width="1" height="53" border="0" alt="" /></td>
</tr>
<tr>
   <td colspan="9"><img name="webdevelopment_r12_c1" src="images/webdevelopment_r12_c1.gif" width="833" height="25" border="0" id="webdevelopment_r12_c1" alt="" /></td>
   <td><img src="images/spacer.gif" width="1" height="25" border="0" alt="" /></td>
</tr>
</table>
<map name="m_webdevelopment_r2_c2" id="m_webdevelopment_r2_c2">
<area shape="rect" coords="5,16,247,57" href="http://www.tcaexpress.com/webdevelopment" alt="" />
</map>
<map name="m_webdevelopment_r2_c7" id="m_webdevelopment_r2_c7">
<area shape="rect" coords="0,41,160,57" href="http://www.tcaexpress.com/" alt="" />
</map>
<map name="m_webdevelopment_r11_c2" id="m_webdevelopment_r11_c2">
<area shape="rect" coords="470,16,524,27" href="webdevelopment_contactus" target="_blank" alt="" />
<area shape="rect" coords="415,16,460,27" href="webdevelopment_portfolio" alt="" />
<area shape="rect" coords="361,16,405,27" href="webdevelopment_services" alt="" />
<area shape="rect" coords="305,16,352,27" href="webdevelopment_aboutus" alt="" />
<area shape="rect" coords="265,16,297,27" href="http://www.tcaexpress.com/webdevelopment" alt="" />
</map>
<script type="text/javascript">

</script>
</body>
</html>

That template that you used uses an XML file to tell the Flash movie which image files to use and where they are. This Flash movie requires that you have a folder named "photos" right next to the .swf file.
When you download the template zip file from flashmo.com, you will get a folder with all of the necessary files including the original .fla file. An important concept to remember is that the names, and the capitalization of those names, are critical to the success of a schema like this. The .swf file is looking for a folder named "photos". On some servers, if the folder is named "Photos", it won't be used. Don't include spaces in the names of your image files. When you are uploading the files to your server, be sure to upload the .swf and the image files as data and not as text.

[HTML]SignTool Error: The file is being used by another process.

Hello,
I receive this error from building a JavaScript app on a build server:
SignTool Error: The file is being used by another process.
This reproduced when building on local machine, and goes away after building again. However, our company uses gated builds so the first failure will stop an entire 2.1 hour build and I can't ship the product.
The instruction to launch SignTool is located in external files so I can't disable it, run it twice, or run it in a while loop until succeeds, ignoring failures. I have to get it to work right the first time. I looked on MSDN, and there are other people
who had this problem and never solved it.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5871d64c-e178-4f5c-85cd-a603fe56d6c7/signtask-signtool-error-the-file-is-being-used-by-another-process?forum=msbuild
http://www.codeproject.com/Questions/275454/Can-anyone-help-me-with-Signtool-Setup-Deployment
http://qualapps.blogspot.in/2006/12/code-signing.html
The only clue I have is our solution having build configurations that aren't called "Debug" and "Release", which have been cloned from Debug/Release and have WinRT apps building. If the build script for WinRT depends on anything being
called "Debug" and "Release" it wouldn't work correctly.
In any case, there is no documentation for SignTool that mentions this error - how do I fix it?

Hi TripleRectified,
>> If the build script for WinRT depends on anything being called "Debug" and "Release" it wouldn't work correctly
What's you version of Visual Studio, on my side, in the Visual Studio 2013 Update 4, I created a new configuration(Copy Settings from "Debug") to build a WINJS project, but I can't see the exception you mentioned.
>>This reproduced when building on local machine, and goes away after building again
Does it happen on all local machines? We need to exclude environment facts first, for example: Tool, OS etc.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Files aren't showing on another node in newly created ocfs2 partition

Similar Messages

Maybe you are looking for