Filevault failed: boot file not written

Just installed Mtn Lion over a clean install of Lion (following a recently corrupted drive) and I cannot enable filevault. I keep getting the message shown below.
I've tried booting from the recovery partition and repairing both the disk and permissions. Still have the same issue - any ideas?
Thanks
Dan.

well there are as usual a few bugs
most of the bugs i experience, except the one in question here. are very special like mail in an encrypted folder does not work anymore, that's basically why I have to turn on file vault which i was for good reason always reluctant to do before.
i tried filevault several times before and sooner or later came across trouble which made me to opt for the sparsbundle option instead.
however to be fair i must say that compared to earlier major system updates lion as well as mountain lion are running quite well, i'm for 22 years with apple now and believe me, i have seen much buggier updatetes than these last too but none as catastrophic as our friends using early windows versions :-)
and if not for business reasons ( consulting ) i would always wait for version x.2 at least. i usually do the immediate update to be ready for my clients's inquiries which includes experiencing some trouble to have solutions at hand :-)
so let's see what appel is coming up with, thanks for the reply and obviously we share the expectation, albeit with reluctance, to format the drive and having to re-install the whole machine after that which is so time consuming.
best regards and the luck to share :-)
ingo

Similar Messages

  • Enabling FileVault 2: "Boot file not written"

    I receive the mentioned error promptly after entering my passphrase. The terminal output is:
    Started CoreStorage operation on disk0s2 Mac HD
    Resizing disk to fit Core Storage headers
    Creating Core Storage Logical Volume Group
    A problem occurred; undoing all changes
    Reclaiming space formerly used by Core Storage metadata
    Error: -69853: Boot file not written
    With the sparse information floating around the web, this problem seems to stem from the fact that I just installed a new Harddrive and cloned my old one with Carbon Copy Cloner.
    Are there any ideas on how to get my Harddrive FileVault ready?

    Here's what diskutil list gives me:
    /dev/disk0
       #:           TYPE NAME                                    SIZE          IDENTIFIER
       0:           GUID_partition_scheme                    *750.2 GB   disk0
       1:           EFI                                                  209.7 MB   disk0s1
       2:           Apple_HFS     Mac HD                       627.0 GB   disk0s2
       3:           Apple_Boot     Recovery HD               650.0 MB   disk0s3
       4:           Microsoft Basic Data     Windows 7     122.3 GB   disk0s4

  • Can't turn on filevault. Error: "Boot File Not Written"

    I can't turn on filevault in lion 10.7. The error returned is simply: "boot file not written". There is no other diagnostic info - help!

    Open the Console application in your Utilities folder to examine log files.
    How large is your user account folder and how much free space is on the drive? Have you repaired the hard drive and permissions?
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • File vault failed, boot record not written

    Went throughthe process to set up encryption and the above error appearied.  Tried several times and error kept on coming back.

    Went throughthe process to set up encryption and the above error appearied.  Tried several times and error kept on coming back.

  • GlobalInitNLS: NLS boot file not found or invalid

    Hi,
    we are in 10g Grid on Win 2003.
    I can not connect to 10g Grid. I have this error :
    D:\oracle\oms10g\opmn\bin>opmnctl ping
    globalInitNLS: NLS boot file not found or invalid
    -- default linked-in boot block used
    XML parser init: error 201.
    opmnctl: ping failed.
    Any idea or help ?
    Thank you.

    Hi Thomas,
    It may not be related, but had problems with Beekeeper on Windows with oranls10.dll until I set the following variable
    OPMN_USE_ORACLELIBS=false
    hth
    David

  • ConfigurationException during deploy "CONFIGURATION FAILED! File not found"

    Hello All,
    The deployment of my adf app. is failing with the following error. Although till yesterday also, it was failing but atleast it was going much farther than this. What is causing this error? I did make changes to config.xml but then restored it. Any help is appreciated. This is critical.
    ####<Sep 14, 2011 1:23:36 PM CDT> <Info> <J2EE Deployment SPI> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024616200> <BEA-260121> <Initiating deploy operation for application, myProject [archive: F:\Oracle\Middleware\user_projects\domains\BPEL_DEV\servers\AdminServer\upload\myProject.ear], to AdminServer .>
    ####<Sep 14, 2011 1:23:47 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024627386> <BEA-149038> *<Initiating Task for myProject : [Deployer:149026]deploy application myProject on AdminServer.>*
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <J2EE> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630053> <BEA-160170> <Imported library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 for Application myProject>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <WorkManager> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630069> <BEA-002903> <Creating WorkManager from "wm/SOAWorkManager" WorkManagerMBean for application "myProject">
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630771> <BEA-101363> <Application: myProject, WebApp: mySubProj has context-root specified in application.xml: "mySubProj". The context-root specified in weblogic.xml: "mySubProj" will be ignored.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024693171> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:54 PM CDT> <Warning> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024694451> <BEA-101162> *<User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found.*
    java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:294)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:357)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:227)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: java.io.FileNotFoundException: File not found
    at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:117)
         at java.util.jar.JarFile.<init>(JarFile.java:135)
         at java.util.jar.JarFile.<init>(JarFile.java:72)
         at com.sun.faces.facelets.util.Classpath.getAlternativeJarFile(Classpath.java:262)
         at com.sun.faces.facelets.util.Classpath.search(Classpath.java:115)
         at com.sun.faces.facelets.util.Classpath.search(Classpath.java:92)
         at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.loadURLs(MetaInfFacesConfigResourceProvider.java:159)     
    at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.getResources(MetaInfFacesConfigResourceProvider.java:107)
         at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1096)
         at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1064)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at com.sun.faces.config.ConfigManager.getConfigDocuments(ConfigManager.java:642)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:309)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:226)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    I did some more research and found out that method loadURLs of class MetaInfFacesConfigResourceProvider.java is throwing IOException. Is this some kind of class path issue? Please help!
    private Collection<URL> loadURLs(ServletContext context) throws IOException {
    154
    155 Set<URL> urls = new HashSet<URL>();
    156 for (Enumeration<URL> e = Util.getCurrentLoader(this).getResources(META_INF_RESOURCES); e.hasMoreElements();) {
    157 urls.add(e.nextElement());
    158 }
    159 urls.addAll(Arrays.asList(Classpath.search("META-INF/", ".faces-config.xml")));
    160 // special case for finding taglib files in WEB-INF/classes/META-INF
    161 Set paths = context.getResourcePaths(WEB_INF_CLASSES);
    162 if (paths != null) {
    163 for (Object path : paths) {
    164 String p = path.toString();
    165 if (p.endsWith(".taglib.xml")) {
    166 urls.add(context.getResource(p));
    167 }
    168 }
    169 }
    170 return urls;
    171
    172 }
    173
    Edited by: user12054715 on Sep 14, 2011 2:13 PM

    I did a couple of things ( gathered from various posts on OTN). I am not sure which one did the trick but the error is gone now. I am mentioning the steps that I took. Later when I have more time, I will narrow down to exactly what worked.
    1. The following was missing from my web.xml (Thanks Rene!) Added it
    <listener>
    <listener-class>com.sun.faces.config.ConfigureListener</listener-class>
    </listener>
    2. Removed any mention of 'Anonymous-User' from Jazn-data.xml.
    Application tab -> Secure -> Configure ADF Security -> Jazn-data.xml (source tab and removed block of code referring to anonymous user)
    Hope this will help others.

  • Nexus 5548UP Downgrade from 5.1.3.N1.1 to 5.0.3.N2.2b fails -- SRG file not present/cannot be opened

    I am attempting to downgrade from 5.1.3.N1.1 to 5.0.3.N2.2b for standards compliance.
    When following the ISSU steps for validation of the install all command I receive the following error on the following command:
    sh install all impact kickstart bootflash:n5000-uk9-kickstart.5.0.3.N2.2b.bin system bootflash:n5000-uk9.5.0.3.N2.2b.bin
    Verifying image bootflash:/n5000-uk9-kickstart.5.0.3.N2.2b.bin for boot variable "kickstart".
    [####################] 100% -- SUCCESS
    Verifying image bootflash:/n5000-uk9.5.0.3.N2.2b.bin for boot variable "system".
    [####################] 100% -- SUCCESS
    Verifying image type.
    [####################] 100% -- SUCCESS
    Extracting "system" version from image bootflash:/n5000-uk9.5.0.3.N2.2b.bin.
    [#                   ]   0% -- FAIL. Return code 0x404F0003 (SRG file not present/cannot be opened).
    I followed some recommendations from this post https://supportforums.cisco.com/thread/2108814
    reload to clear temp and cache
    show system internal flash
    checked md5sum of image
    I found this information http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/deferral/Deferral_Advisory_Notice_N5K.html
    I am unsure of how to upgrade when the steps to validate indicate a problem with the upgrade/downgrade.
    I still receive the error.
    Any help would be greatly appreciated.
    Attached are the steps done so far and outputs.

    I had already created a case with our reseller.  The engineer there had me reload the 5ks and attempt the show install all impact again.  When I did it was successful.
    I was able to then downgrade to 5.0.3.N2.2b.  I am currently working to duplicate the issue by going back to 5.1.3.N1.1.
    The engineer also stated that I was probably running into this bug:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw25835
    Here is the contents of the sh system internal flash and show system internal dir /var/tmp:
    Mount-on                  1K-blocks      Used   Available   Use%  Filesystem
    /                            409600     72564      337036     18   /dev/root
    /proc                             0         0           0      0   proc
    /post                          2048         4        2044      1   none
    /var                         409600     72564      337036     18   none
    /sys                              0         0           0      0   none
    /isan                       1536000    409628     1126372     27   none
    /var/tmp                     307200        72      307128      1   none
    /var/sysmgr                 1024000         0     1024000      0   none
    /var/sysmgr/ftp              409600        68      409532      1   none
    /var/sysmgr/ftp/cores        102400         0      102400      0   none
    /callhome                     61440         0       61440      0   none
    /dev/shm                     524288    126552      397736     25   none
    /volatile                    153600         0      153600      0   none
    /debug                        20480         0       20480      0   none
    /dev/mqueue                       0         0           0      0   none
    /debugfs                          0         0           0      0   nodev
    /mnt/plog                     49024      1300       47724      3   /dev/mtdblock2
    /mnt/cfg/0                   114909      4274      104702      4   /dev/sda5
    /mnt/cfg/1                   112920      4274      102816      4   /dev/sda6
    /var/sysmgr/startup-cfg      409600      2104      407496      1   none
    /dev/pts                          0         0           0      0   devpts
    /mnt/pss                     114917      5923      103060      6   /dev/sda4
    /bootflash                  1609984    779460      748740     52   /dev/sda3
                                                                    ./         640
                                                                   ../         240
                                                       bootloader_ver            0
                                               util_cli_history_admin           48
                                                                mysrg         1664
                                                        mcm_ascii.log         1019
                                                     m2rib_ascii.3248           68
                                                               arping          101
                                                            stp.log.1         3836
                                                             fwm1.out            0
                                                        cmp_slot_id.1            0
                                                               ntpd_1            0
                                                         ntp_client_1            0
                                                     ntp__libdapi.log            0
                                                     igmp_restart.log            0
                                                     radius_debug.log          232
                                                          cfs_mac.log          166
                                                           climib.log         1416
                                                              lcc.log          694
                                                      security_stderr           77
                                                      security_stdout            0
                                                        aaa_debug.log          519
                                                   security_debug.log          647
                                                            evmc.3005           31
                                                           idehsd.log          602
                                                            mvsh.3000            0
                                                            lockcisco            0
                                                              .flexlm/          60
                                                                 logs@          20
                                                      first_setup.log         2981
                                                      boot_uptime.log           56
                                                                  vsh/          40

  • Boot file not changed after XP was removed!!

    I installed XP on my macbook pro but when i removed the XP partition, the boot file was not changed. Every time i restart the computer it boots into the windows partition and tells me that no drive was found. In order to boot in OS X i have to hold the option key and choose the OS X drive which is the only one that appears on the screen... Any one know how to fix this problem?
    Alex

    You might want to reread the setup guide; you can use Startup Disk preference pane to establish a default boot disk.
    Doug

  • File not written to XI..

    Hi,
    I am preparing a Flat File to an XML File scenario. The developments and Configuration have been made in the Integration Repository and the Integration Diretory. The file is getting picked up but the File is not getting written in XI Directory.
    When I check SXMB_MONI the status is green. There is no Error, but still there is no file written in the XI Directory.
    Wnen running SXI_CACHE the CACHE is not refreshed and the Error is BUSINESS_SYSTEM Error. The "Start Delta Cache Refresh" and the "Start Complete Cache Refresh" is also disabled. We cannot refresh the Cache too.
    Another thing while Performing SLDCHECK, we get the Remote Function Call as Green i.e. running but it says "COnnection to SLD is not Working" inspite of the fact that we have all the TCP/IP Connections up and Running.
    It will be hugely beneficial to advice me on this. Expecting for a reply soon. Thanking in anticipation.
    Thanks and Best Regards
    Chakra and Somnath

    Hi Chakra and Somnath,
    >><i>When I check SXMB_MONI the status is green. There is no Error, but still there is no file written in the XI Directory.</i>
    Are you able to see the inbound payload message in sxmb_moni?
    >><i>Wnen running SXI_CACHE the CACHE is not refreshed and the Error is BUSINESS_SYSTEM Error. The "Start Delta Cache Refresh" and the "Start Complete Cache Refresh" is also disabled. We cannot refresh the Cache too.</i>
    Please go through the following thread, the same issue has been discussed:
    SXI_CACHE - Problem
    Regards,
    Sushumna

  • Can't sync file not written

    I bought a movie from itunes and when I synced my phone I got this error message of not being written. I think that is what it said. Unfortunately I unplugged the iphone and tried to sync it again and nothing happened. No pop up message and the movie is still not being downloaded onto my iphone. What can I do to rectify this, please help.

    You need to restore the pre-upgrade backup of the library file in the manner shown in  Empty/corrupt library after upgrade/crash.
    tt2

  • Background job - failing when file not on app server

    Hi Experts,
    I am facing an issue, while I am trying to run a program in background.
    Let me explain u the situation.
    My program runs in background and pick one file from predifined folder from application server and process that file. if file is not in the folder batch job goes into cancel status. but what i want if proposed file is not available then batch job will run and finished; it should not go into cancle status.
    waiting for valuable inputs,
    Prarthan.
    Edited by: Julius Bussche on Feb 20, 2009 1:06 PM
    Please use meaningfull subject titles

    hi
    below is my piece of code for application server.
    thanks.
    FORM application_server .
      TYPE-POOLS: kcde.
      DATA : lt_intern TYPE  kcde_cells OCCURS 0 WITH HEADER LINE.
      DATA wa_src01 TYPE string.
      DATA: BEGIN OF wa_src0,
           material         LIKE bapi2017_gm_item_create-material,
           consumption_qty(13) TYPE c,"  like bapi2017_gm_item_create-entry_qnt,
           base_uom         LIKE bapi2017_gm_item_create-entry_uom_iso,
           movement_type    LIKE bapi2017_gm_item_create-move_type,
           cost_center      LIKE bapi2017_gm_item_create-costcenter,
           doc_date         LIKE bapi2017_gm_head_01-doc_date,
           post_date        LIKE bapi2017_gm_head_01-pstng_date,
           plant            LIKE bapi2017_gm_item_create-plant,
           storage_location LIKE bapi2017_gm_item_create-stge_loc,
           END OF wa_src0.
      DATA : lt_src0 LIKE TABLE OF wa_src0.
      DATA : file1 TYPE string.
      DATA : tmp0(20). " type string.
      DATA : intern1 TYPE  kcde_intern.
      DATA : tmp_date LIKE sy-datum.
      path1 = path.
      replace '.txt' in PATH1 with ''.
      IF path IS INITIAL.
        path = '/usr/local/interface/globalone/SFA/SFA_WORK/SFA_'.
        tmp_date0(2) = sy-datum6(2). "date dd
        tmp_date2(2) = sy-datum4(2). "month mm
        tmp_date4(4) = sy-datum0(4). "year yyyy
        CONCATENATE path plant tmp_date '.txt' INTO path.
       concatenate path  tmp_date  into path1.
      ENDIF.
      file1 = path.
      file_nm = path.
    FILE_NM2 = PATH1.
      OPEN DATASET file_nm FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
      IF sy-subrc NE 0.
       MESSAGE e000(zmm002).
       EXIT.
      ELSE.
        DO.
          READ DATASET file_nm INTO wa_src01.
          IF sy-subrc = 0.
             CLEAR wa_src0.
            REPLACE cl_abap_char_utilities=>cr_lf(1) IN wa_src01 WITH ''.
            SPLIT wa_src01 AT cl_abap_char_utilities=>horizontal_tab
                                INTO  wa_src0-material
                                      tmp0
                                      wa_src0-base_uom
                                      wa_src0-movement_type
                                      wa_src0-cost_center
                                      wa_src0-doc_date
                                      wa_src0-post_date
                                      wa_src0-plant
                                      wa_src0-storage_location.
            SHIFT tmp0 LEFT DELETING LEADING '0'.
            wa_src0-consumption_qty = tmp0.
            APPEND  wa_src0 TO lt_src0.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
        CLEAR wa_src0.
        LOOP AT lt_src0 INTO wa_src0.
          REPLACE ',' IN wa_src0-consumption_qty WITH '.'.
          MOVE:  wa_src0-material         TO wa_srcdata-material,
                 wa_src0-consumption_qty  TO wa_srcdata-consumption_qty,
                 wa_src0-base_uom         TO wa_srcdata-base_uom,
                 wa_src0-movement_type    TO wa_srcdata-movement_type,
                 wa_src0-cost_center      TO wa_srcdata-cost_center,
                 wa_src0-doc_date         TO wa_srcdata-doc_date,
                 wa_src0-post_date        TO wa_srcdata-post_date,
                 wa_src0-plant            TO wa_srcdata-plant,
                 wa_src0-storage_location TO wa_srcdata-storage_location.
          APPEND wa_srcdata TO gt_srcdata.
          CLEAR wa_srcdata.
          CLEAR wa_src0.
        ENDLOOP.
      ENDIF.
      DELETE DATASET file_nm.
    ENDFORM.                    " application_server

  • FileVault Fails on Yosemite when FileVaultMaster.keychain is present in /Library/Keychains

    Hi,
    I've been using the method described here to create institutional recovery keys for deployment our 10.7-10.9 target systems. This approach has worked well in my environment for the past few years; we're a DeployStudio shop and typically include the FileVaultMaster.keychain (prepared for deployment with the private key removed) in a package payload that's delivered to our target systems as part of a DeployStudio workflow.
    In testing on 10.10 & 10.10.1 targets with the institutional key in place (at /Library/Keychains), I've found I'm unable to enable FileVault via System Preferences. I do see the expected message indicating that 'A recovery key has been set by your company, school, or institution' but after clicking 'Continue' am not given the option to choose users to unlock the disk. Instead, I see one of the following three "FileVault Failed" errors: "Unable to create a FileVault context", "Boot file not written", or "The given disk is in use by a driver".
    I first suspected a problem with the recovery partition restored during the DeployStudio workflow, but I think I've ruled out this possibility: 1) I found that by removing the FileVaultMaster.keychain from /Library/Keychains on a DeployStudio-imaged system, I'm once again able to enable FileVault normally via System Preferences; and 2) I can reproduce this issue by deploying a prepared FileVaultMaster.keychain to a target system on which I've installed Yosemite using the stock installer from the MAS.
    Has anyone run into a similar problem with institutional keys in 10.10?
    Thanks,
    -Bill

    A bit more testing (using diskutil to compare the status of the recovery and boot volumes before and after trying to enable FileVault) suggests that the boot volume is somehow becoming damaged when I try to enable FileVault through System Preferences (when FileVaultMaster.keychain is in place).
    Before trying to enable FileVault: diskutil verifyVolume /Volumes/OS\ X\ Base\ System
    The volume OS X Base System appears to be OK
    File system check exit code is 0
    Finished file system verification on disk1s2 OS X Base System
    Before trying to enable FileVault: diskutil verifyVolume /Volumes/Macintosh\ HD
    The volume Macintosh HD appears to be OK
    File system check exit code is 0
    Finished file system verification on disk0s2 Macintosh HD
    After trying to enable FileVault: diskutil verifyVolume /Volumes/OS\ X\ Base\ System
    The volume OS X Base System appears to be OK
    File system check exit code is 0
    Finished file system verification on disk1s2 OS X Base System
    After trying to enable FileVault: diskutil verifyVolume /Volumes/Macintosh\ HD
    Volume header needs minor repair
    The volume Macintosh HD was found corrupt and needs to be repaired
    File system check exit code is 8
    Error: -69845: File system verify or repair failed
    Underlying error: 8: POSIX reports: Exec format error
    I can repair Macintosh HD, but it apparently becomes damaged again on subsequent attempts to enable FileVault.
    I encountered a new scenario where the system hangs for a few seconds after clicking 'Continue' to enable FileVault, then reboots (without presenting one of the three error messages described in my original post) and begins encryption, but still without having presented the pane to select users to unlock the disk.
    I have verified that my recovery partition version matches that of the OS (when booted to the Recovery Partition, sw_vers returns ProductVersion: 10.10). So far, I've been able to reproduce this behavior on these systems: Late 2008 MacBook Pro, Late 2009 MacBook, Mid 2013 MacBook Air, and Late 2014 Mac mini (straight out of the box with 10.10 and the original, unmodified recovery partition).

  • TFTP file not found.

    OES2 (suse) server with Zen 7 installed, normal installs no errors.
    Running DHCP/DNS on same server as zen and novell-proxydhcp. When I try
    and PXE a machine it picks up the ip and connection but the fails saying
    "file not found". I have set the filename "pxelinux.0" in the dhcp.conf.
    Where does the tftp server know what folder to look in ? Ive also tried
    putting in full path but still doesnt work?, What have I missed ?
    Ive put the vendor-class-identifier in DHCP.conf but still no go?

    Have you set any bootfile parameter in the DHCP server. The only DHCP
    option that is supported is option 60 if your PDHCP-server is the same
    as the DHCP-server.
    Erik
    The Netherlands
    Bjorn Sundqvist wrote:
    > Have you tried to specify nvlnbp.sys instead?
    >
    > // Bjorn
    >
    > "Trevor Wright" <[email protected]> skrev i meddelandet
    > news:SCL0j.2058$[email protected]..
    > > OES2 (suse) server with Zen 7 installed, normal installs no errors.
    > > Running DHCP/DNS on same server as zen and novell-proxydhcp. When I
    > > try and PXE a machine it picks up the ip and connection but the
    > > fails saying "file not found". I have set the filename
    > > "pxelinux.0" in the dhcp.conf. Where does the tftp server know
    > > what folder to look in ? Ive also tried putting in full path but
    > > still doesnt work?, What have I missed ?
    > >
    > > Ive put the vendor-class-identifier in DHCP.conf but still no go?
    > >
    > >
    > >

  • Boot.properties file not fetching by weblogic server 10.3.6.0

    Hi Team,
    I have Installaed weblogic Server 10.3.6.0 and Forms and Reports 11.1.2.2.0. Even though the boot.properties with weblogic credentials is located in Weblogic Domain under security folder, the weblogic server is asking username and password while starting the services.
    Environment : Windows Server 2008 R2- 64 bit
    Please suggesst what would be the root cause of this issue.
    Many thanks in advance!
    Kind Regards,
    Mohan

    ####<Dec 19, 2014 10:05:13 AM SGT> <Notice> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <main> <<WLS Kernel>> <> <> <1418954713757> <BEA-000365> <Server state changed to STANDBY>
    ####<Dec 19, 2014 10:05:13 AM SGT> <Notice> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <main> <<WLS Kernel>> <> <> <1418954713757> <BEA-000365> <Server state changed to STARTING>
    ####<Dec 19, 2014 10:05:13 AM SGT> <Info> <SAFService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954713788> <BEA-281003> <SAF Service has been initialized.>
    ####<Dec 19, 2014 10:05:13 AM SGT> <Info> <SAFService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954713803> <BEA-281002> <SAF Service has been started.>
    ####<Dec 19, 2014 10:05:13 AM SGT> <Info> <WseeCore> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954713803> <BEA-220502> <The Wsee Service is starting>
    ####<Dec 19, 2014 10:05:13 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954713913> <BEA-149209> <Resuming.>
    ####<Dec 19, 2014 10:05:14 AM SGT> <Info> <JMX> <SRVBIAPDEV02> <AdminServer> <JMX FRAMEWORK Domain Runtime MBeanServer pooling thread> <<WLS Kernel>> <> <0000KdWIeWT2ZN8LziO5yW1K^sVM000001> <1418954714755> <BEA-149505> <The administration server was unable to establish JMX Connectivity with the WLS_FORMS at the JMX Service URL of <none>.>
    ####<Dec 19, 2014 10:05:14 AM SGT> <Info> <JMX> <SRVBIAPDEV02> <AdminServer> <JMX FRAMEWORK Domain Runtime MBeanServer pooling thread> <<WLS Kernel>> <> <0000KdWIeWT2ZN8LziO5yW1K^sVM000001> <1418954714755> <BEA-149505> <The administration server was unable to establish JMX Connectivity with the WLS_REPORTS at the JMX Service URL of <none>.>
    ####<Dec 19, 2014 10:05:15 AM SGT> <Info> <WorkManager> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954715707> <BEA-002901> <Creating WorkManager "consoleWorkManager" for module "null" and application "consoleapp">
    ####<Dec 19, 2014 10:05:18 AM SGT> <Info> <Diagnostics> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954718889> <BEA-320114> <Initializing the Diagnostics Harvester.>
    ####<Dec 19, 2014 10:05:18 AM SGT> <Info> <Diagnostics> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954718905> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
    ####<Dec 19, 2014 10:05:18 AM SGT> <Info> <Diagnostics> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954718905> <BEA-320119> <The Harvester is now in a inactive state.>
    ####<Dec 19, 2014 10:05:19 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954719217> <BEA-160151> <Registered library Extension-Name: UIX, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (WAR).>
    ####<Dec 19, 2014 10:05:19 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954719341> <BEA-160151> <Registered library Extension-Name: adf.oracle.businesseditor, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Dec 19, 2014 10:05:20 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954720153> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
    ####<Dec 19, 2014 10:05:21 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954721260> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain.webapp, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Dec 19, 2014 10:05:21 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954721447> <BEA-160151> <Registered library Extension-Name: emai (WAR).>
    ####<Dec 19, 2014 10:05:21 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954721759> <BEA-160151> <Registered library Extension-Name: emas (WAR).>
    ####<Dec 19, 2014 10:05:22 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954722337> <BEA-160151> <Registered library Extension-Name: emcore (WAR).>
    ####<Dec 19, 2014 10:05:22 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954722461> <BEA-160151> <Registered library Extension-Name: jsf, Specification-Version: 1.2, Implementation-Version: 1.2.9.0 (WAR).>
    ####<Dec 19, 2014 10:05:22 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954722539> <BEA-160151> <Registered library Extension-Name: jstl, Specification-Version: 1.2, Implementation-Version: 1.2.0.1 (WAR).>
    ####<Dec 19, 2014 10:05:22 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954722633> <BEA-160151> <Registered library Extension-Name: ohw-rcf, Specification-Version: 5, Implementation-Version: 5.0 (WAR).>
    ####<Dec 19, 2014 10:05:22 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954722711> <BEA-160151> <Registered library Extension-Name: ohw-uix, Specification-Version: 5, Implementation-Version: 5.0 (WAR).>
    ####<Dec 19, 2014 10:05:22 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954722914> <BEA-160151> <Registered library Extension-Name: oracle.adf.dconfigbeans, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (JAR).>
    ####<Dec 19, 2014 10:05:22 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954722976> <BEA-160151> <Registered library Extension-Name: oracle.adf.desktopintegration, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723023> <BEA-160151> <Registered library Extension-Name: oracle.adf.desktopintegration.model, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723101> <BEA-160151> <Registered library Extension-Name: oracle.adf.management, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723210> <BEA-160151> <Registered library Extension-Name: oracle.bi.adf.model.slib, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723304> <BEA-160151> <Registered library Extension-Name: oracle.bi.adf.view.slib, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723397> <BEA-160151> <Registered library Extension-Name: oracle.bi.adf.webcenter.slib, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723460> <BEA-160151> <Registered library Extension-Name: oracle.bi.composer, Specification-Version: 11.1.1, Implementation-Version: 0.1 (WAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723491> <BEA-160151> <Registered library Extension-Name: oracle.bi.jbips, Specification-Version: 11.1.1, Implementation-Version: 0.1 (EAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723850> <BEA-160151> <Registered library Extension-Name: oracle.bpm.mgmt, Specification-Version: 11.1.1, Implementation-Version: 11.1.1 (EJB).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723865> <BEA-160151> <Registered library Extension-Name: oracle.dconfig-infra, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (JAR).>
    ####<Dec 19, 2014 10:05:23 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954723943> <BEA-160151> <Registered library Extension-Name: oracle.jrf.system.filter (WAR).>
    ####<Dec 19, 2014 10:05:24 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954724053> <BEA-160151> <Registered library Extension-Name: oracle.jsp.next, Specification-Version: 11.1.1, Implementation-Version: 11.1.1 (JAR).>
    ####<Dec 19, 2014 10:05:24 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954724068> <BEA-160151> <Registered library Extension-Name: oracle.pwdgen, Specification-Version: 11.1.1, Implementation-Version: 11.1.1.2.0 (JAR).>
    ####<Dec 19, 2014 10:05:24 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954724084> <BEA-160151> <Registered library Extension-Name: oracle.wsm.seedpolicies, Specification-Version: 11.1.1, Implementation-Version: 11.1.1 (JAR).>
    ####<Dec 19, 2014 10:05:24 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954724084> <BEA-160151> <Registered library Extension-Name: orai18n-adf, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (JAR).>
    ####<Dec 19, 2014 10:05:24 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954724365> <BEA-160151> <Registered library Extension-Name: oracle.webcenter.composer, Specification-Version: 11.1.1, Implementation-Version: 11.1.1 (WAR).>
    ####<Dec 19, 2014 10:05:24 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954724692> <BEA-160151> <Registered library Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, Implementation-Version: 11.1.1 (EAR).>
    ####<Dec 19, 2014 10:05:24 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954724723> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:25 AM SGT> <Warning> <Security> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954725425> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
    ####<Dec 19, 2014 10:05:25 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954725425> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:25 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954725628> <BEA-149059> <Module / of application FMW Welcome Page Application [Version=11.1.0.0.0] is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:25 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954725753> <BEA-149060> <Module / of application FMW Welcome Page Application [Version=11.1.0.0.0] successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:25 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954725847> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:25 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954725987> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727032> <BEA-149059> <Module NonJ2EEManagement of application NonJ2EEManagement [Version=11.1.1] is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727251> <BEA-149060> <Module NonJ2EEManagement of application NonJ2EEManagement [Version=11.1.1] successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Warning> <Munger> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727313> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in D:\Oracle\Middleware\user_projects\applications\ClassicDomain\em.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727422> <BEA-160170> <Imported library Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, Implementation-Version: 11.1.1 for Application em>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727485> <BEA-160170> <Imported library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 for Application em>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Warning> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727531> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application em is not versioned.>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727797> <BEA-149059> <Module empty.jar of application em is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727797> <BEA-149060> <Module empty.jar of application em successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:27 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954727797> <BEA-149059> <Module /em of application em is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:32 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954732461> <BEA-149060> <Module /em of application em successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Dec 19, 2014 10:05:32 AM SGT> <Warning> <J2EE> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954732477> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.rules, referenced from: D:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\AdminServer\tmp\_WL_user\emai\xalnv4]. Make sure the referenced optional package has been deployed as a library.>
    ####<Dec 19, 2014 10:05:32 AM SGT> <Info> <WebService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954732960> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Dec 19, 2014 10:05:33 AM SGT> <Info> <WebService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954733116> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Dec 19, 2014 10:05:33 AM SGT> <Info> <WebService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954733132> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Dec 19, 2014 10:05:33 AM SGT> <Info> <WebService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954733147> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Dec 19, 2014 10:05:33 AM SGT> <Info> <WebService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954733179> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Dec 19, 2014 10:05:33 AM SGT> <Info> <WebService> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954733179> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Dec 19, 2014 10:05:33 AM SGT> <Info> <netuix> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954733491> <BEA-423101> <[console] Initializing the NetUIx container>
    ####<Dec 19, 2014 10:05:33 AM SGT> <Info> <netuix> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954733896> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [console//WEB-INF/client-classifications.xml]. Classifications functionality not enabled.>
    ####<Dec 19, 2014 10:05:34 AM SGT> <Info> <netuix> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954734411> <BEA-423101> <[consolehelp] Initializing the NetUIx container>
    ####<Dec 19, 2014 10:05:34 AM SGT> <Info> <netuix> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954734489> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [consolehelp//WEB-INF/client-classifications.xml]. Classifications functionality not enabled.>
    ####<Dec 19, 2014 10:05:34 AM SGT> <Info> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954734645> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
    ####<Dec 19, 2014 10:05:34 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954734661> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:34 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954734661> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739091> <BEA-149059> <Module / of application FMW Welcome Page Application [Version=11.1.0.0.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739091> <BEA-149060> <Module / of application FMW Welcome Page Application [Version=11.1.0.0.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739122> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739122> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739200> <BEA-149059> <Module NonJ2EEManagement of application NonJ2EEManagement [Version=11.1.1] is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739200> <BEA-149060> <Module NonJ2EEManagement of application NonJ2EEManagement [Version=11.1.1] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <ServletContext-/NonJ2EEManagement> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739497> <BEA-000000> <Can not locate oracleDmsNotifier for now. DMS will discover opmnInfoCenter instead.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739512> <BEA-149059> <Module empty.jar of application em is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739528> <BEA-149060> <Module empty.jar of application em successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739528> <BEA-149059> <Module /em of application em is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:05:39 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KdWIhiu2ZN8LziO5yW1K^sVM000002> <1418954739528> <BEA-149060> <Module /em of application em successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Diagnostics> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954771508> <BEA-320000> <The Diagnostics subsystem is initializing on Server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Store> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954771523> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=D:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\AdminServer\data\store\diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="wlfileio3".>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Store> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954771555> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (d07e85b4-188c-42cd-a669-feceb778a8ea) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=29.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Log Management> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954771586> <BEA-170025> <Initialized Domain Logging. Domain log events will be written to D:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\AdminServer\logs/ClassicDomain.log.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <Log Management> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954771586> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Diagnostics> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1418954771695> <BEA-320077> <Initialized the Diagnostic Accessor Service.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Diagnostics> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000005> <1418954771726> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Diagnostics> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000005> <1418954771726> <BEA-320119> <The Harvester is now in a inactive state.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <main> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000006> <1418954771773> <BEA-000365> <Server state changed to ADMIN>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <main> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000006> <1418954771882> <BEA-000365> <Server state changed to RESUMING>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149059> <Module / of application FMW Welcome Page Application [Version=11.1.0.0.0] is transitioning from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149060> <Module / of application FMW Welcome Page Application [Version=11.1.0.0.0] successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149059> <Module NonJ2EEManagement of application NonJ2EEManagement [Version=11.1.1] is transitioning from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771929> <BEA-149060> <Module NonJ2EEManagement of application NonJ2EEManagement [Version=11.1.1] successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771945> <BEA-149059> <Module empty.jar of application em is transitioning from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771945> <BEA-149060> <Module empty.jar of application em successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771945> <BEA-149059> <Module /em of application em is transitioning from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Deployer> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771945> <BEA-149060> <Module /em of application em successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server AdminServer.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Management> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000007> <1418954771945> <BEA-141053> <The auto deployment poller has not started for the production server.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Info> <Server> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000008> <1418954771960> <BEA-002610> <Dynamic Listener Service initialized.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <Server> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000008> <1418954771960> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:100:7f:fffe:7001 for protocols iiop, t3, ldap, snmp, http.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Warning> <Server> <SRVBIAPDEV02> <AdminServer> <DynamicListenThread[Default]> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000009> <1418954771960> <BEA-002611> <Hostname "SRVBIAPDEV02", maps to multiple IP addresses: 10.4.93.117, 0:0:0:0:0:0:0:1>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <Server> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000008> <1418954771960> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <Server> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000008> <1418954771960> <BEA-002613> <Channel "Default[2]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp, http.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <Server> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000008> <1418954771960> <BEA-002613> <Channel "Default" is now listening on 10.4.93.117:7001 for protocols iiop, t3, ldap, snmp, http.>
    ####<Dec 19, 2014 10:06:11 AM SGT> <Notice> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000008> <1418954771960> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "ClassicDomain" running in Production Mode>
    ####<Dec 19, 2014 10:06:12 AM SGT> <Notice> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <main> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000006> <1418954772007> <BEA-000365> <Server state changed to RUNNING>
    ####<Dec 19, 2014 10:06:12 AM SGT> <Notice> <WebLogicServer> <SRVBIAPDEV02> <AdminServer> <main> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000006> <1418954772007> <BEA-000360> <Server started in RUNNING mode>
    ####<Dec 19, 2014 10:06:12 AM SGT> <Info> <J2EE> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-000000000000000a> <1418954772007> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
    ####<Dec 19, 2014 10:06:12 AM SGT> <Info> <EJB> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-000000000000000a> <1418954772350> <BEA-010008> <EJB Deploying file: mejb.jar>
    ####<Dec 19, 2014 10:06:13 AM SGT> <Info> <EJB> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-000000000000000a> <1418954773333> <BEA-010009> <EJB Deployed EJB with JNDI name ejb.mgmt.MEJB.>
    ####<Dec 19, 2014 10:07:11 AM SGT> <Info> <Health> <SRVBIAPDEV02> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-000000000000000c> <1418954831724> <BEA-310002> <39% of the total memory in the server is free>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893174> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoIdentity.jks.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893330> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893345> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\PROGRA~1\Java\jdk1.7.0_71\jre\lib\security\cacerts.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Alert> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893455> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Fri Mar 22 04:12:27 SGT 2002,
                   To: Wed Mar 23 04:12:27 SGT 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893501> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G2,OU=(c) 2007 thawte\, Inc. - For authorized use only,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=Buypass Class 3 Root CA,O=Buypass AS-983163327,C=NO". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=Buypass Class 2 Root CA,O=Buypass AS-983163327,C=NO". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Class 3 Public Primary Certification Authority - G4,OU=(c) 2007 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893517> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893533> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893533> <BEA-090898> <Ignoring the trusted CA certificate "CN=AffirmTrust Commercial,O=AffirmTrust,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893533> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <02ecc29b92549eb6:-2ae67fda:14a604a9f85:-8000-0000000000000011> <1418954893533> <BEA-090898> <Ignoring the trusted CA certificate "CN=AffirmTrust Premium ECC,O=AffirmTrust,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.10045.4.3.3.>
    ####<Dec 19, 2014 10:08:13 AM SGT> <Notice> <Security> <SRVBIAPDEV02> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'web

  • "BIOS ME update....file not found " since a P67A-GD65 bios update failed

    Hi everyone,
    I've decided to post this little message after looking for a solution over the web and over the MSI forum because I've got a problem since the BIOS update of my P67A-GD65 MB.
    I've followed the update process for the 4.32 BIOS using an USB key, the update started but did not continue after reboot, and since My PC is out of order
    The "BIOS ME update....file not found " message is displayed after lots of booting tries, using plenty of methods.
    I've looked and tried all the techniques I could find over the web, I've tried :
    -PC with and without SATA drives connected
    -the last 4 versions of the bios found on-line, even the original version of my MB before updating (1.19)
    -4 different usb keys (from 128 Mb to 4 GB)
    -all front and back usb ports
    Each time, on each usb key, there were several bios versions, even one renamed to AMIBOOT.ROM for testing the recovery method.
    I've also tried to make the keys bootable by using the “MSIHQ USB Bootable” tool with the 1.19 bios (after the boot fix), the usb key appears in the F11 boot menu but when I select it, the PC boots but still shows me the "BIOS ME update....file not found " message.
    I've also tried a clear CMOS with several power off.
    I've also tried to burn a CD containing only a AMIBOOT.ROM file, and to boot on it, but same problem occurs.
    In brief, it seems that my PC does not recognize my Key's content, whatever it is.
    I've you got an idea to help me ?
    Last precision, the update process that failed was using the 4.3 bios version, but my CPU is a not an IvyBridge .
    thanks for your help

    HI
    I've tried  with your file , that's better but not solved
    the "BIOS ME update....file not found" has gone but my bios is still inacessible.
    I put the usb key (with the decompressed file) and the PC starts, displays the MSI boot logo, and then shows a message for hitting F1 or F2 bla bla bla...
    Whatever the key that has been hit (F1 or F2, and only the first time), the pc boots again and again after displaying the boot logo, followed by a 30 seconds black screen.
    If I remove the key, I've got a message that says I have to put a key on an usb port, and when I put back the usb key , the PC starts to boot again and again.
    Once again , I'm stuck. 
    thanks for your help

Maybe you are looking for

  • MacBook Air (Mid 2013/Mavericks) - Freezes, requires hard restart

    11-inch, Mid 2013 MacBook Air. Upgraded to OS X Mavericks in December 2013 - have downloaded every fix/patch as prompted by the App Store. Relatively simple use pattern - word processing and web work. No bootcamp or 3rd party software, out side of Mo

  • How to turn my macbook pro into router via a usb dongle

    hello guys,,, would you please help me in this matter,,, how could i to turn my macbook pro into router via a usb dongle, in order for my other apple products can have internet connection too. im connected to the web via vodafone usb dongle. thank yo

  • Extracting files from Portfolio - problem with outlook email created portfolios

    Currently I have developed a plugin that can extract files from portfolios using:- PDNameTree tree = PDDocGetNameTree(pdDoc, ASAtomFromString("EmbeddedFiles")); and PDFileAttachmentFromCosObj But i've noticed with Outlook email created portfolios the

  • BI apps 7.9.6.3 on Linux 64 Bit

    Has anyone had any success in installing OBIEE (11.1.1.5), DAC (10.1.3.4.1), Informatica (9.0.1 hotfix 2) and Oracle BI Apps (7.9.6.3) on Linux 64 bit? We have been provided 2 physical Linux servers (say A & B) and 2 virtual server (say C & D) for th

  • Music stops when exported to Quicktime

    HI all, I have made a slideshow in iPhoto, and attached music to it that works fine when I play the show. However, when I export it to QuickTime, the music fades out when it gets to the 30th slide! Any reason why this is and how I can stop it?