Filter rule for subscription to the mailservice

Hi,
I developed a process which sends an email to a customer. The subject of this email includes a requestID. After the email is send, I would like the process to wait for a reply of the specified customer (filter: from=[email protected]). I would also like to add a filter on the subject (because a customer can have more then one requestID's).
Is there anything possible like the LIKE statement or a CONTAINS statement? If I say subject=*<ID>*, it will hang until it gets an message with the *-signs around the ID.
It will work if I put 'RE: ' in front of the sended subject, but this is not a fancy solution for my problem.
Kind Regards,
RenÃ©

The default behavior of subject="ID" basically it does contains functionality.
In your case, lets say the subject is "WorkOrderIDItem" or "112121ID42232", to filter this you can just specify subject="ID" as filter. this will filter those two subjects.
We are going to provide regular expression based subject filtering in the next release. Please let us know if you need further help.

Similar Messages

I cannot pay for subscription cause the system says the address for the invoice doesn't correspond to my credit card

i cannot pay for subscription cause the system says the address for the invoice doesn't correspond to my credit card. It's not possible, my credit card doesn't correspond to any address

These transactions help Adobe confirm that the credit card used is valid and not reported as lost or stolen. The transaction isn't charged to your account, and once your credit card company verifies it, Adobe removes the charge.
http://helpx.adobe.com/x-productkb/policy-pricing/adobe-stores-online-order-payment-faq.ht ml
You can also contact Adobe Support to place the order.
Regards
Rajshree

Help~~:'MD_SALES_ORDER_STATUS_REPORT' filter rule for MD04?

As you know we can use function 'MD_SALES_ORDER_STATUS_REPORT' to relate the (PR PR PlanOrder Prorder) with Sales Order.
But when the screen go to MD04,the number of (PR PR PlanOrder Prorder) showed is less than the function 'MD_SALES_ORDER_STATUS_REPORT' Export table IIOELX.
I want to know the filter rule of the order data?
How can?
Thanks a million~~

Lorryhappy,
It is not clear to me that this function module will perform the task that you expect.
Anyhow, have you looked at OSS notes [326325|http://service.sap.com/sap/support/notes/326325] or [325543|http://service.sap.com/sap/support/notes/325543]?
Rgds,
DB49

Kontext rule for formatting only the first child section in a chapter

Hi all, I have run into a DITA problem. Each chapter of the document, i.e. top-level topic, contains a miniature toc of the nested sections. Therefore the first child topic's title should receive a page break.
I tried this context rule for the title element, below you find the screenshot which I have tried to translate because the EDD is in German. Even though I define that the context should be the first parent topic only, the result is that every second-level topic now has a page break. Any ideas?
8. Count ancestors: topic
    concept
    task
    reference
    If level is: 2
      8.1 If context is: (topic{first} | concept{first} | task{first} | reference{first})
            ..then set page break.
Robert

First, regardless of the UI language, you can import element definitions from an EDD using any of the language templates. Second, you can change the template that FM uses when it creates new EDDs (from the commands that in English are labeled StructureTools > New EDD and StructureTools > Export Element Catalog as EDD). Simply copy the desired template to $FMHOME\fminit\fmstruct\elemcat where $FMHOME is the directory in which FrameMaker is installed. I recommend backing up the original first.
You can create an English EDD template from any English EDD simply by deleting all its content.
By the way, you can modify the EDD template by changing its formatting rules, master pages, and so forth. I haven't yet done so for FM 11, but see http://forums.adobe.com/thread/909395 for information on various changes I've made to the English EDD templates for previous versions.
         --Lynne

Non-zero rule for figuring out the interior of a shape

I need help in understanding how the non-zero rule works in figuring out the interior of a shape? Can anybody give a simple example? The winding rule is set by the PathIterator...WIND_NON_ZERO.

Do you have a Java question?
We can't really answer general questions like that, except to point you towards google.
If you have some Java code you're working with, post an [SSCCE |http://sscce.org] that demonstrates where you're stuck, and be specific with your questions.

Help-Rule Based Subscription with the Payload using Advanced Queue in BPEL

Hi,
I am using multi-consumer queue while dequeuing the messages from the queue i am specifying a rule which determine a particular message in the queue should be routed to a particular subscriber.
But my rule is not being effective all the subscribers to the queue are pciking the same message.
Thanks
Hems

Hi Hems,
Please refer : SOA_ORACLE_HOME\\bpel\samples\tutorials\124.AQAdapter\RuleBasedSubscription_Payload sample.
Regards
A

Need help adding filter criteria for reports with the GO URL + Post method.

In attempts to hide some of the information from the URL, we've decided to go pull the parameters out of the url used in the GO Url method. We've managed to get it to retrieve the report and display it without showing the user name and password how we cannot seem to pass in any search criterias.
The following is what i have:
Can anyone help me with this issue? or provide any suggestions?
Thanks!
form id="form1" runat="server" action="http://452.342.424.421/analytics/saw.dll?Go" method="post">
<input runat="server" id="Cmd" type="hidden" name="Cmd" value="Answers"/>
<input runat="server" id="nqUser" type="hidden" name="nqUser" value="admin"/>
<input runat="server" id="nqPassword" type="hidden" name="nqPassword" value="admin"/>
<input runat="server" id="Path" type="hidden" name="Path" value="/users/abid.farooq/Countries" />
<input type="hidden" name="Options" value="fr" />
<input type="hidden" name="Action" value="Navigate" />
<input type="hidden" name="P0" value="1" />
<input type="hidden" name="P1" value="eq" />
<input type="hidden" name="P2" value="%22Location%22.%22Country%20ID%22" />
<input type="hidden" name="P3" value="CHN" />

Hi,
Instead of this,
<input type="hidden" name="P2" value="%22Location%22.%22Country%20ID%22" />
can you try this:
<input type="hidden" name="P2" value='"Location"."Country ID"' />
Here, instead of enclosing the value in double quotes, enclose in single quotes. Also replace %22 and %20 with double quotes and space.
Try it and let me know if this helps!
Thanks

Automatic Business Area Derivation Rule for Vendor Line Item in MIRO

Hello Experts,
We trying to use Business Area concept for our client.
I have completed all configuration setting for the business are derivation like
1. Creation of Business Area
2. Assign Business area to Plant / Division (OMJ7)
3. Business area determination from sales area (TVTA)
4. Business Area by Sales Area
5. Checked Field Status Group for Customer and Vendor Reconciliation Account
It is working for for compelete sales process and in Procurement cylce it is picking business for MIGO transaction both the line items.
But
In MIRO (Purchase invoice posting) it is automatically taking Business area to the GR/IR line item and it not taking Business area for the vendor line item (automatically)
I comes know that there is a business area derivation rule for this to happen automatically.
Can you please propose the soulution for the automatic derivation of business in MIRO for vendor line item.
Regards,
Chalapathi

Hi,
I do mot think there is a BA derivation rule for MIRO.
The best you can do is:
1. Use a user exit or enhancement point for deriving the BA from the GR/IR line and populate that in the vendor line
or
2. You make BA as a mandatory field in the field status group for the vendor reconciliation account. This will then force the user update the BA. We use this option. This is so because at times, the vendor item may need a different business area than the GR/IR line.
Cheers.

No transfer rules for FI master data sources

Hi all
I didnt get transfer rules for some of the FI master datasources.
0GLACCEXT_T011_HIER
0NEG_POSTNG_TEXT
0ITEMSELFLG_TEXT
When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
*Infosource(transaction data) is not known.
How to resolve this isssue.
Thanks.

Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if any and install the same.
Not all the fields will be mapped with BI info objects. Only necessary ones as defined in BI content will be available for you.
If you feel the mapping is incomplete you can modify the same according to the requirement.
Hope this helps.
Regards,
Rangz

Uploading a text file from webi filter area as part of the query condition

Post Author: balasura
CA Forum: Publishing
Requirement : Uploading a text file from webi filter area as part of the query condition Hi, I am in a serious requirement which I am not sure available in BO XI. Can some one help me plz. I am using BO XI R2, webi I am generating a ad-hoc report, when I want to give a filter condition for a report, the condition should be uploaded from a .txt file. In the current scenario we have LOV, but LOV could hold only a small number of value, my requirement is just like a lov but the list of values will be available in a text file ( which could number to 2000 or 2500 rows). I would like to upload this 2500 values in the form of a flat text file to make a query and genrate report. Is it possible in BO XI? For Eg:- Select * from Shipment Where u201CShipment id = u2018SC4539u2019 or Shipment id = u2018SC4598u2019u201D The u201Cwhereu201D condition (filter) which has shipment id will be available in a text file and it needs to be loaded in the form of .txt file so that it will be part of the filter condition. Content of a .txt file could be this shipment.txt =============== SC4539 sc2034 SC2343 SC3892 . . . . etc upto 2500 shipment Ids I will be very glad if some could provide me a solution. Thanks in advance. - Bala

Hi Ron,
This User does not have the access to Tcode ST01.
The user executed Tcode SU53 immediately following the authorization failure to see the authorization objects. The 'Authorization obj' is blank and under the Description it has 'The last Authorization check was successful' with green tick mark.
Any further suggestions, PLEASE.
Thanks.

REMSH unix command issues when adding rule for port 514

Has anyone experienced any issues with Unix systems when adding rules to WAAS for port 514? This is the port RCOPY uses and is not handled by WAAS by default. We created a rule for port 514 but when we implement any type of optimization (even TFO Only) we start having problems with REMSH. This is used in one of our production scripts that normally take 10 minutes to run. When we apply the rule for port 514 the time goes as high as 45 minutes.
We wrote a test script that uses just the REMSH command and with out the 514 rule works fine but with the 514 rule goes down the tubes.
Just to add a little more information, I do not see an entry under Monitor/ Connection Statistics with the servers in question when the test script is running so am not sure where to go from here. I know there is a way to do a TCP capture from the WAAS so figure that will be the next step to see what is causing the issues.
Thoughts?? Ideas?? Suggestions??

Well TAC came back with a answer. They found other people with the same issue.
"It was found that the applications always used the same source and destination TCP ports. WAAS has the first connection in a "WAIT-CLOSE" state so when the next packet comes in with the same ports it is dropped." , "A defect was opened for this issue, but has not been fixed yet."
He wanted us to do a packet capture but after finding these other tickets decided it would be a waste of time and only tell us we are having a similar issue as others.
Still waiting on a suggested work around or a patch, 4.15 is suppose to come out soon but haven't heard if it will fix the problem.
With the new information I don't think even putting 514 in pass-through will fix the issue.
I will let you know if I hear anything else.

HT204088 i am getting billed for subscription that i am unable to download on my ipad, help

Who do I call to complain about being billed for subscriptions to the Times that I can't access?

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
In terms of a refund, you can try contacting iTunes Support via this page and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Is possible to config an subscrat rule for all the signatures enables in IPS?

Hi.
is possible to config an subscrat rule for all the signatures enables in IPS?
Thnks
Sent from Cisco Technical Support iPad App

Yes, In the event action filter configuration configure the signature range , victim IP address and the action to subtract.

HT1725 Any one out there experienced like I did aninability to loate a number to all iTUnes at to cancel a service such as a subscription to the NY Times? I have been seeking tha numbe now for 3 days and no one I hve written to at iTunes has bothered to

I am getting desperate trying to cancel by telephone a subscription to the NY Times since it expired on 01-15-13, and I tried to call to cancel and I even called the NY Times and spoke to an agent there that indeed located my subscription but could not help me cancel since I had bought it from iTunes.
He did give me a tel. number for iTunes but he did not vouch that it would help me since it ended up being a technicl support number and the lady I spoke with told me that she could not even tell me where to go to cancel and she of course could not cancel it so back to square 1.
I 'm concerned because my credit card did not have the funds to cover tha $34.99 charge, and escond, I have bought many apps. so far from your partners but now I am told that I will not be able to updare any of them as they offer updatings due to the payment problem on the NY Times although I did not even wish to buy it again from iTunes at all.
I have had an Apple I-phone as you can tell, for many years now and have the 3rd one right now and getting ready for May to come to upgrade to
the latest model, but with this service, I'm inclined to "fuhgetetabout-it" and go to Galaxy, etc., that are begining to sound very atractive as of today.
You tell me what is next and I will lsten, but I do not want to pay $34.99 just to throw my money away. I will be willing to wait till May to finish my contract and move on to the competition if need be, I will not be bullied by a giant company that refuses to give me a tel. number to simply cnacel a subscriptin without wasting so much of my preciious times..
Ernie

These are user-to-user to forums, you are not talking to Apple here.
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

I am having trouble with rules in mac mail. The first rule window shows but i cannot open a second filter rule!!

Hi
I am trying to create rules that would copy the incoming email to a cloud folder ( depending on sender ) and move the actual email from the inbox to a local folder on my laptop.
The problem i seem to be having is the first rule ( regardless of whether it is copy or move ) shows ok but when i press the + button it does not bring up a new filter window as it used to.
Totally confused on this one, can anyone help?
Thanks
Oh, latest versions of everything!!!!

I'm having difficulty visualizing what is wrong but try some basic steps first:
Launch Safari while holding a Shift key - this will start Safari with just your Home page
If you can see Reset Safari from the Safari menu, try that.
In addition to downloading and installing Safari again, try reapplying just the Snow Leopard Combo Update: http://support.apple.com/kb/DL1399 There is no need to uninstall Safari first.
Lastly try deleting Safari's Preferences file: ~/Library/Preferences/com.apple.Safari.plist

Filter rule for subscription to the mailservice

Similar Messages

Maybe you are looking for