Filtering of Data through Combo Box with chart drill down Option.

Hey Guys,
I need to ask one thing about combo box filtering option, i want to filter my data like country, agent, customer and in the end material. I have achieved this through filter component but the thing which bother me is that if i select the specific customer in filter option it directly give's input to other filter's which i don't want. So the alternate is combo box but the thing which is creating problem is that if i filter my data through combo box it doesn't give any option for the chart filtering. For more convenience i am attaching my spreadsheet data which i want to filter. please help me in this matter.
Thanks & Best Regards,
Hassan Ali.
Sample Is Below::
Country
Customer
Material
Austria
David
   Mat 1
Austria
Simon
   Mat 2
China
XYI jo
   Mat 2
China
CHU pa
   Mat 4
India
Suresh
   Mat 1
India
Ramesh
   Mat 5
Sales Quantity
Export Sales
300.000 FT2
1,631,020.77 PKR
600.000 FT2
3,108,107.67 PKR
600.000 FT2
11,917,131.08 PKR
200.000 FT2
8,679,817.14 PKR
760.000 FT2
8,059,453.23 PKR
790.000 FT2
1,727,072.16 PKR

Nothing to do with excel file, just the logic with combo box.

Similar Messages

Can I have a blank field on my document when using a combo box with a drop down list in Word 2011 for Mac?

I am creating a drop down list using a combo box in the Developer tab. Once I protect my document I want the field to remain empty and not show any of the items on my drop down list. Is there a way to do this? Currently it shows one of the items on my list.
Thanks

Paul's answer is correct.
Since this is a Word IT forum for Windows, in the future you should use the
answers.microsoft.com forum. It specializes in Word for the Mac. BTW - Paul stops by there also, so you'll still get his advice from there. :-)
Kind Regards, Rich ... http://greatcirclelearning.com

How do I retrieve data from combo boxes?

The past weekend I spent my whole weekend trying to find this
out and gone through the top 10 pages on google trying all sorts of
things. I would be grateful for anyone who can help me.
I have 6 combo boxes in a booking form and I need to retrieve
the data when someone click submits which gets forwarded on to php
then my mailbox. They are called box1_cb, box2_cb.....box6_cb All
in the instance of: ComboBox - which I don't understand what that
does.
it does not seem to be retrieving any of the data. For each
combo box:
I have the the options people can choose form in "Labels" box
under "Paramaters", nothing for "Data", Row Count is 8 and nothing
for "Change Handler" which I don't know what it does.
Can anyone please provide some help with telling me what
"change handler" does, do I need the data for each combo box in the
"Labels" parameter as well as the "Data" box, what an instance does
(for combo boxes) and what I need to put in the actionscript for
the submit button as well as do i need to put code in the
actionscript for each combo box?
The options people can choose from in the combo boxes are
there when someone views the site.
Can anyone please help me..I would greatly appriciate it.
Thanks.

If your hard drive can be detected and shows up as a drive letter in my computer but you can't access your files,then you can recover your data off it with data recovery software easily.This way is the easiest and the most inexpensive way to recover your data.If you bring it to a computer repair shop that is available for data recovery servise,they will cost you $500-1000 or more.Hmm, a lot of money.
I managed to recover data from crashed hard drive with Tenorshare Data Recovery.If needed,you can download it and scan your hard drive for free to preview whether your data can be recovered.It will show you thumbnails for recoverable pictures.

How I can stop the combo box with list of values from fireing validations

Hi I'm using Jdeveloper 11.1.2.3.0
Using Hr Schema employees table
I Display employees data in af:table
and I make List Of values on Department_id filed to easy change the employee department
and another one on Job_id filed
and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
the problem is when I Select a value from department or jobs ( combo box with list of values )
fires the entire filed validations for mandatory atributes
Note : the af:table Property ( contedelivery) is set to (immediate )
How I can stop the combo box with list of values from fireing validations

check it out.,
http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

How to retrieve data in Combo box?

:mad; I need to do a form for delivery order. Just fill some
personal data and order of product. Inside I have some combo box of
product, but I need save the record into txt file (just once time)
then need to retrieve the data from txt file onto combo box. I have
attached the code, I don't know which part got wrong, anybody who
get help me?

"roy16" <[email protected]> wrote in message
news:[email protected]...
>
I need to do a form for delivery order. Just fill
some personal data
> and
> order of product. Inside I have some combo box of
product, but I need
> save the
> record into txt file (just once time) then need to
retrieve the data from
> txt
> file onto combo box. I have attached the code, I don't
know which part got
> wrong, anybody who get help me?
>
> Combo box code :
> controls := wcGetControlList()
> listing := "Choose an Item"^Return^"Hot
> Chocholate"^Return^"Tea"^Return^"Coffee"^Return^"Low fat
> Milk"^Return^"Full
> Cream Milk"^Return^"Orange Juice"^Return^"Purified
Water"
> id_list := wcDisplayControl(350, 350, 150, 21,
"ComboBox", "wcS")
> propList := wcGetPropertyList(id_list)
>
>
> Save the data from Combo box list :
> data := wcGetPropertyValue(id_list, "value")^Return
data at this point will be some number between 0 and 7 and
your appended
return.
> WriteExtFile("list2.txt", data)
>
> Read the data from txt :
> data := ReadExtFile("list2.txt")
This will again be a string that contains a number and a
return.
> Convert string to list :
> id_list := [:]
Before, you are populating id_list with a single number that
is the _ID_ of
the winCtrl . Now, you are changing it to an empty property
list. Why?
> AddProperty(data^id_list,controls ,GetLine(data,1))
The first parameter of AddProperty is supposed to be the name
of a variable
which is a property list. As such, you couldn't use a
concatenated
expression there. Even if you could, an Authorware variable
cannot begin
with a number, which data always will in this instance. It
also cannot
contain a return. _And_ the characters "[:]" are not valid
parts of a
variable name either. Next, you're trying to add a property
that looks
something like:
"Button\rCheckBox\rCheckListBox\rColorCombo\rComboBox\rDriveCombo\rEdit..."
While a property list _can_ have strings instead of symbols
as the keys to
the values, this is not documented or officially supported.
Even if it
were, you _cannot_ have a key with returns in it, and I have
no idea why
you'd want to!
Here are the steps you should be using:
1) Create your WinCtrl and store its ID in a regular numeric
value (I'll
call it wcID for convenience)
2) Set its Items property to listing.
3) Check for the existence (FileType) of your file with the
value of the
winCtrl in it. If it exists, set the value property of wcID
to the contents
of the file.
4) You're using wcS as your change event, so set up a
conditional on false
to true with wcS as the condition.
5) Inside that response, write the "value" property (without
the return) of
the wcID control to file.
HTH;
Amy

How to fill combo box with list of all SQL server

Ok, I know how to find all SQL servers that I need, I have code for that task, and I have Array of all servers.
My problem is ...
I made setup project and do a huge work, and in the end this task appear!
I used ORCA tool to change TextBox (A) template in visual studio (2008 by the way), and I transform first TextBox to ComboBox.
Now, the little part that I'am missing is how to fill this combo box with a result of my function for listin SQL servers?
Can I somehow send combobox object to myMethod:
private void FillCombo(ComboBox cmb)
// do the job
or
instanceOfThisCombo.Items.Add(listOfSQLServers);
please help me to solve this... thanksc#

Hi Valerij,
The ComboBox control in an MSI dialog uses the ComboBox table to populate the items in it. To get what you want, you need to update the ComboBox table in the MSI package with your application and run the MSI package. The following KB article describes how to dynamically populate a ListBox control in Windows Installer:
http://support.microsoft.com/kb/291329
This method introduced in the above KB article also applies to populating a ComboBox control in Windows Installer.
I don't think it's possible to run the application as a Custom Action from within the MSI package because the application will modify the content of the MSI package which is currently running. So you need to launch the MSI package from within your application after updating the ComboBox table. In short, when installing, just run your application which updates the ComboBox table and install the MSI package.
Hope this helps.
If you have any question, please feel free to let me know.
Sincerely,
Linda Liu

Issues with multilevel pie chart drill down with push button

I am new to Xcelsius. I am trying to build a multilevel pie chart drill down (one pie chart drilling down to another etc) and I am able to achieve that. Now I want to add a Back Button using Push Button so that I can go up. When I preview, the Push Button goes into two state and I have to double click to go back. Can anyone tell me what I am doing wrong. I am using the latest Xcelsius. [The source code is here|http://www.woofiles.com/dl-195360-3lTyVM8Z-piechartdrilldownwithpushbutton.xlf]
Thankyou.

Hi Murali
This is exactly the same what i tried to do,
Drill down to 4 levels State -> City-> store etc with 4 pie charts and similar push button to close each level to
go back to previous chart, first run from 1 to 4 works fine, then after closing all the levels and when i am at the pie chart 1
if i click any pie slice it will jump to Pie chart 4 straight,
I tried tracking the issue, all i could find is some how the previous dynamic visibility values are back even after erasing
the data with the PUSH button (Destination cell insertion with blank or 0).
did you find a solution for this issue ?
Thanks
Chandra

J1INUT Error - No data exist for processing with the given selection option

Hi Guru's,
I am using transaction J1INUT utilization of provision of TDS on Services for which in have made the provision with the help of J1INPR, But when I am executing J1INUT transaction .The following error message is displaying:
No data exist for processing with the given selection options
I have followed the below steps.
1) ME21N - OP Creation
2) ML81N - Service Entry
3) J1INPR - Provision of TDS
4) MIRO - Invoice Posting
I have checked the Table J_1IEWTPROV In that system is updating the table also. Even I have activated table TRWCA for field IND
But still I am getting the same error. Any suggestions to resolve this.
Appreciate your inputs. Thanks in Advance
Regards,
DeepaK

Hi Deepak,
Refer the below link and follow the steps - Provision for Taxes on Service Recieved.
Re: Provision for Taxes on Service Recieved
Hope it may useful to you.
Regards,
Govind Bhaskaran

Bubble Chart drill down issues

I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Thanks

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

Stacked Column Chart drill down

I have a stacked column chart. Data is dynamic. Sometimes one column will have 0 as value.
I need to do a drill down on the ones which has value. In order to do a drill down everytime, I don't want my drill down to be tied to a specific serie...
How can I do that?
Thanks,
Wen

Hi Wen:
Let me do a quick demo to you so you can learn how drill down for stacked column chart works
1. Create a new stacked column chart.
2. Choose data binding "By Range" and "Data In Columns" binds to range "A1~C2", which has range data as following:
a, 1, 2
b, 3, 4
3. After finishing step 2, there will be two series created (Series 1, and Series 2)
4. Open drill down tab and check "Enable Drill Down".
5. Choose "Insert Type" as "Row".
6. Click "Series 1".
7. Bind "Source Data" to range "D1~E2" which contains value as following:
11,12
13,14
(these are the drill down value you want to insert)
8. Bind "Destination" to "D3~D4" (empty cells)
9. Create another component "Grid" under "Other" folder.
10. Bind grid data to "D3~D4" to present the drill down data.
11. Preview the xlf file, can click values in series 1, you will see the drill down result. (Grid will be refreshed with new drill down data)
Hope the demo above can help you in your practice, also you can refer to help documents for more information. Let me know if you have any other questions!
Thanks!
Bill

Bubble chart drill down

HI All,
We have 4 levels like(Continent,Country,State,Dist). Our business Req is like drill down from entity at one level to another entity at the following level.Each Entity has one to many relation ships with entities in the subsequent levels.
For Ex: One Continent will be linked to many Countries etc..
We are trying to find a solution where a click on particular continent will point to a dataset / Range of values.....
Could any one tell us how to define a range of values....
Thanks In Advance
Nithila

Hi Nithila Siva ,
This is quite same as all other chart drill down.
Here is the explanations:
You have 4 levels drill downs :Continent,Country,State,Dist that means you can have 4 bubble charts in the canvas.In the First chart display all the continents(ex: Asia,Africa etc..) select asia from the first chart it should display all the contries in the ASIA (india ,pakistan etc..) in the second chart and follow the same for rest 2 charts.
How can we do this:
From your raw data you need to filter the data and point it to different charts. you can do this by writing formulas in the excels ex : point the data of all the continents in the first chart and in the properties tab-> enable drill down->select row-> in the source give all the continents and point the destination to one particular cell,so if you select a continent that value will come and sit in the destination cell and then you have to write formulas comparing the destination cell.
Hope this helps.
let me know if you need any explanation on this.
Cheers,
Sudharam

Xcelsius Bubble Chart - Drill Down Issues

Hi ,
Product : Xcelsius SP 3
I have a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings.
The problem is with drill down
I want to drill down to a X-Y chart when I click on bubbles. Each bubble click will drill down data into that X-Y chart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Please help if someone has encountered this issue. There has to be some solution for this.
Thanks,
Tarun

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

GR Document number & posting date in drill down option? (Reporting)

Dear Experts,
As im new to reporting,i had a requirement from my client..the question is
This is with regards to report Order Values on Posting Date (0PUR_C01_Q00021)
Can you add GR Document number & posting date in drill down option?
i guess if i keep both of the in free characteristic,it will be the result,please suggest me on this
Thanks & Regards,
Srikant

Dear Experts,
My Client requirement is he want GR Document number and GR Positing Date in the drill down option,im not able to find them in the query designer level. the query is under the cube 0PUR_C01. any suggestions will be a great help..
Thanks and Regards,
Srikanth

SharePoint Performancepoint Analytic chart drill down

Hi,
Anybody can tell me?
In SharePoint performance point analytic chart drill down.
The drill down showing all the dimensions from the datasource but instead of that. I would like to show only the required dimensions only. How to configure it?
Is it possible?
Thanks & Regards
Poomani Sankaran

Hi Poomani,
According to your description, my understanding is that you want the drill down to show only the required dimensions.
Here is an article about this issue, please check if it is useful:
http://denglishbi.wordpress.com/2012/03/28/using-perspectives-with-performancepoint-services/
In addition, as this issue is related to SSAS, I suggest you create a new thread on SQL forum, more experts will assist you with this issue.
SQL forum:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Chart drill-down support

Hi, guys
Is chart drill-down supported for the web app in CR 2008/CR XI and how is it activated ?
regards, TST

Hi
I'm using CR XI R2 for the web site
The drill-down feature works fine in the preview mode in CR 2008 but not in the CR viewer. at the web site.
I sort out the way to activate the zoom feature by set autodatabind property to false.
But I´m not able to activate the drill-down feature for the chart at the web site
regards, TST

Filtering of Data through Combo Box with chart drill down Option.

Similar Messages

Maybe you are looking for