Finaancial Year closing , Customer Balance Transfer
Dear Sir,
As a part of new Financial Year starting , We executed the Tcode FAGLGVTR for transferring the Balanes to New Financial Year .
However , for the Customers we find that Previous Year claosing Balances are not getting appeared against the Customer Accounts .
Kindly guide us as what steps need to be followed so that Customer Balances gets transferred correctly .
We assure to award full points for the suggested solution pl .
Rgds
B Mittal
Hi,
You need to complete the procedure of closing as per below detail:-
F.07 C/f Balance of Vendor & Customer
F.16 or (FAGLGVTR) c/f Balance of GL
AJRW Change Fiscal year for fixed Assets.
Regards,
Pankaj
Similar Messages
-
Customer balance transfer from one profit centre to other profit centre
Hi friends,
We want to transfer the customer balance from one profit centre to other profit centre. How is it possible.Hello
Balance sheet items in PCA can be distributed during period end closing activities.
Please read the documentation in the link and config the same / execute
http://help.sap.com/erp2005_ehp_02/helpdata/en/eb/13706b43c411d1896f0000e8322d00/frameset.htm
Reg
assign points if useful -
Customer Balance Transfer possibility?
Hi,
Is there a possibility to transfer CUSTOMER balances directly or using somework around.
Please let me know me know with the transaction codes possible!
Thanks
RegardsThe scenarion is as follows:
I have a customer A with a credit limit of say 100 rs. and we have invoice him for rs. 80 . so balance outstanding credit limit is rs 20.
I have another customer B with rs 100 credit limit and he has been invoiced only for rs 10. so his outstanding credit limit is rs. 90.
Now if I have to invoice customer A for rs 50 which system does not allow me to do.
Can I transfer the balance credit limit of rs 90 of customer B to customer A and make the sales possible?
Thanks
Regards -
Customer balance transfer to different profit center
hi
i want to transfer the balance of one customer to another, when i am posting the balance it is not asking for any profit center and that balance is going in dummy profit center. how to post the entry .please guide.
ThanksDear
Since the customer is created at client level, you need to have/operate a clearing GL to transfer the balance from one customer account to another so that the profit center is inherited to cutomer account from the clearing account.
Customer A/c Dr
Clearing A/c (with profit center)
Clearing A/c Dr (with profit center)
Customer A/c Cr
Or you can do trnasfer posting with clearing.
Regards -
How to transfer gl, vendor, customer balances from 1com code to 2 com code
Hi sap guru's,
Regarding one issue, please give me the solution it's urgent,
My problem is My client will having 11 com codes. out of those one company code is merge with another company code. so how to transfer all balances from one company code to another company code.
is there any effect will haapen once balance upload. ie adjustments
Thanks & regards,
Maruthi.You create one account grp Uplaod accounts.In which you create 5 GL masters with follwing data
Tax Catergory :*
Line Item Display : Yes
Open Item Display : Yes
Sort: 0001(Gl), 012(Vend),031(Cust)018(Asst) etc
FSG: g001
Under that grp you need to create all 5 accounts . All are balancesheet Accounts
GL Balance Upload Ac
Customer Balance Upload Ac
Vendor Master Uplaod Ac
Asset Master Upload Ac
Material Upload Ac
You should take the trail balance of the company and chose all gl accounts with balances
use LSMW uplaod GL balance upload f-02
Example : Salareis Acc - 5000 Dr Balance
Then entery will be
Salaries Ac----
Dr 5000
To GL Uplaod Ac 5000
Example : Rent Ac-2000 Cr Balance Ac
Then the GL entry will be
GL upload Ac----
DR 2000
TO Rent Ac 2000
Example for Vendor upload Account F-43
Vendor Cr Balnce- 5000 and client want ot upload line item wise
ex line items are: 1000,2000,3000
Vendor Upload Ac----
Dr 50000
To Vendor Ac 1000
To Vendor Ac 2000
To Vendor Ac 3000
Same with the case of Customer F-22,
Assets : For assets you need to use AS91 which will create asset master data and upload
chandra -
Customer & vendor balance transfer to Profit centre
Hi Experts
this is Geetareddy . pls could any body help to me abt
how customer & vendor balance transfer to Profit centre
thanks
get points
GeetaHi
It is through Material master, if your client is using SD and MM, or it is through other line item, vendor or customer balances are identified to profit center.
assign points if found useful
KM Naidu -
Opening Balance from Previous Year Closing Balances
HiWe are trying to create multiple year budgets for balances sheets which rely on previous year info for opening balances.Our time dimension has months and year to date as the low level.e.g. TOTAL_YTD Jan_YTDYears are in dimenison scenario.
Please ignore posted before complete
-
F.07 customer balance carry forward doubts
Hi folks,
i have some concerns about T-code F.07.
1. Can we run this Tcode more than one time for a particular customer account for the same fiscal year? If it's allowed what will happen?
2. For the record in KNC1 table, if we run the F.07 twice, what will happen? will the system created two records, or the second run will update the first run. eg. the first carry forward have the amount 400. and after carry forward this is another invoice posted wit amount 100 with the posting day in the previous fiscal year, so will this 100 carry forward automaticly? or need to run the balance carry forward again for this customer ? and what's the records looks like in table KNC1 for these three phase?
thanks in advanceMr. Dave,
If after the balance carry forward from the Previous year to the current year (whether AR/AP/GL) and an entry is passed in the previous year... if the balances are not getting updated, what could be the reason.
For example, if a GL Account has a balance of 400 and the balance is carried forward to next year. Then another 100 is passed to the same GL Account but in the previous year. Then according to you (and as per logic), the last year closing balance and the current year opening balance shall become 500. But, after posting this new entry of 100, both the balances remain at 400. and we are again having to do a balance carry forward. What could be the reason for this and how we can avoid this.
Regards
Siddique -
Previous Year Closing and current year opening Bal not matching in FS10N
Hi for some GLs Previous year's Cumulative balance and current year's opening balance is not same. What could be the reason?
For example The closing Balance for FY 2008 is Rs.125398 where as in the current year opening balance it is displayed as some 65123 in the cumulative balance column what could be the reason. Is there any option for layout change at FS10NHi Srini,
Run F.16 and F.07 again and check.
Or tally your figures with normal transactions only in FBL3N.
And do checking GL balances for all the GL accounts except your vendor recon account and customer recon accounts.
Hope this might help a little.
Thanks,
Srinu -
Hi Sappers!
1. I would like to know what steps & transaction codes are involved in period end (monthly & yearly) closing in FI.
2. How do we carry forward the balances to the next period? Will opening & closing periods in OB52 achieve this?
3. In our existing system once we close a particular module like Sales Order Module, it automatically transfers the amount in the General Ledger. How do we achieve his in SAP.
4. Are there any special closing activities involved in quarterly closing?
Appreciate your time!
VjHi,
Below is list of MEC/YEC transactions reqd usually see what applys in Your case.
Check List for full closing
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Area's Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances ( T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) ( T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code :F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account ( T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP ( T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP ( T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGI--for both month end and year end
50 Doubtful receivables (T.Code : F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI ( T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports ( T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closing-- Asset Accounting--final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period ( T.Code: OB52)
Regards
Parag -
S_ALR_87012247 - Customer Balances and Line Items in Local Currency
Hi All,
This report S_ALR_87012247 - Customer Balances and Line Items in Local Currency is not displaying line items for customers in ECC6. Is there any configuration required to get the line items? Please help
Thanks
SrideviIf you see this report S_ALR_87009950, you will get
Opening Balance at the start of fiscal year
Debits and Credit during the reporting period
and the Cumulative Balance.
Please note the above report will not give you line item details.
S_ALR_87012247 report is specifically for poland, in the description it is mentioned that the line items will be displayed, unfortunately, for other countries, there are no line items visible. Therefore, you may explore the possibility of copying this report and changing the code in order to bring the line items along with the totals. -
Problem in making logic for customer balance report
Hi,
I am working on a customer balance report in which i am picking the data from BSAD and BSID tables. I am facing a problem that i am able to calculate the opening balance in it but not able to calculate closing balance. I am comparing the data with tcode FBL5N for opening and closing balances for a given date range. Kindly help me out where i am getting wrong:-
Here the link to the code :-
http://docs.google.com/View?id=dfxswwff_11fdktr7ct
Edited by: nav009 on Feb 6, 2010 9:30 AMHi Nikhil,
Thanks for you response but i had developed the report and i am able to pick the correct data but i am facing the problem in displaying the NETAMT which is displaying the data using this formula :-
1.) NETAMT = NETAMT + W_TAB1-DR + W_TAB1-CR.
so that the last value matches with the closing balance.
When i am using this formula i am not able to display the correct data of deducting or addition of the opening balance in it but the value matches with closing balance .
2.) NETAMT = NETAMT + W_OPBAL-OPBAL + W_TAB1-DR + W_TAB1-CR.
When i am using this formula it is showing the first value correctly but not the last one which will be displayed in the closing balance.
I want to have desired output to display the first value to be displayed as it is showing in the (2) and last value to be displayed as it is showing in (1) last value.
How can i achieve this functionality? i really want to know...
Edited by: nav009 on Feb 10, 2010 6:29 AM -
Change print program of Customer Balance Confirmation (F.17)
Hey experts,
I created a customer print program "ZSAPF130D" which is going to replace the standard print program "SAPF130D".
However, I found no possibility to change the print program for transaction F.17 in the customizing (SPRO) section.
In customizing
SPRO--> Financial Accounting (New) --> Accounts Receivable and Accounts Payable
--> Business Transactions --> Closing --> Count --> Balance Confirmation Correspondence --> Make and Check Settings for Correspondence
--> Define Form Names for Correspondence Print
I was able to attach my new custom form (sapscript) to the Customer Balance Confirmation but found no way to change the pring program.
I could be able to change the attached program via se93 but i don't know if this is the right way to do so.
Could you please give me some advice,
thanks in advance,
treee111 - BenHi Gordon,
you are right, I'm sorry that I posted here.
Could a moderator please delete this post since I have already postet in the right forum.
Thanks,
Ben -
Vendor/Customer balances carryforward issue
Hi Team,
My Client last year (2008 ) not carryforward the vendor/Customer balances through F.07.
But this year (2009) carryforward the balances.
The thing is cumulative balances not showing properly since 2008.
In this senario can I carryforward the balances again 2007 to 2008 and 2008 to 2009. or any other alternative ways is there.
Regards,
BharathDear Bharath
Yes you have to carryforward the balance again 2007 to 2008 and 2008 to 2009 for Customer/Vendor through F.07. But after doing that you have to carryforward the balance again 2007 to 2008 and 2008 to 2009 for General Ledger respectively through F.16
Hope it solves...
Cheers
IMK -
Vendor/Customer Balance Carry forward
Hi
is it require to forward the vendor/customer balance in the year end
if no ,what is the reason?Hello,
You don't need to post carryforward balance. But after year change you must run a report for balance carryforward. This report transaction is F.07 for customers and vendors. This report fills LFC1, LFC3, KNC1, KNC3 tables. If you don't run this report you can not get correct data from FK10N or FD10N transaction.
I hope it helps to you.
Regards,
Burak
Maybe you are looking for
-
Webmail timeouts and lost mail
I have seen several topics here with people complaining that Webmail times out when they are composing outgoing mail, and lose it when they hit send. However, none of these existing posts seem to have valid fixes or responses, and they all seem to b
-
Hi, I want to create dynamic crystal report using below mention xml file. Example:-- <?xml version="1.0" encoding="utf-8"?> <root xmlns:inl="http://inline"> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="http://inline" xmlns=
-
I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then
-
Can't find photo library but I can see them in photo editing apps???
When I go to my photo app on my ipad I can see some photos but not all of them. When I tried to open one of the photo editing apps I have all of my pictures are there. Why can't I see them in the other photo app where they use to be. To my knowledge
-
Apple 23" Aluminum HD compatible with...
Hi There, I bought in december 2008 a 24" (1680X1050) imac in Germany. Now I´m planning to switch a similar screen as second monitor: Apple 23" Aluminum HD Cinema Display Monitor Mac LCD with serial # is 2A5291SEPKL. The question is: Would it works?