Finally abandoning Dreamweaver 1.2... now what?

Hope this isn't too dumb a question, but I'm old. Must retire faithful ancient XP desktop. I used Dreamweaver 1.2 from a floppy disk to build a large genealogical website. Will the current edition of Dreamweaver be able to work with such old files and enable me to continue to edit the site?
I am not very good at it, and a bit anxious, knowing these things get more complicated, not simpler. New computer hasn't got a CD tray, let alone a floppy disk drive.
Any advice appreciated!

Noticed some here ...http://en.softonic.com/s/adobe-dreamweaver-free-download
but $20 seems pretty reasonable if it will work with old files.
Keep thinking I'll really learn how to make a nice clean simple page someday without fussing. The oldest ones really do look crude now, but truth be told it's pretty surpring there are functional pages at all! It seemed very complex back in 2003.
Ancestry,com has been a resource, but most of the work predates Ancestry, if you can believe it! Piles and piles of paper and old photos, library visits. Miles of microfilm. The site like many others is hosted by Freepages and Rootsweb, which Ancestry may have devoured at some point in its quest for world domination.

Similar Messages

Finally left BT... now what happens??

Today I managed to get my Virginmedia services installed at my home. I now have an ultra speedy 50meg connection and am now more than happy. I have had my number ported to VM and now the BT phone line will not make calls (although i have a dial tone) so i am assuming my line had now been cancelled.
What i would like to know is when will the Broadband on the BT line go off as at the moment it is still up and running. I was told that i did not need to give BT any notice of cancellation as it would all go dead as soon as my number was ported to Virgin.
Is this something that will just happen in due course or will i have to deal with the wonderful BT helpline to make sure i will no longer be billed for the service??

Hi Darren200473
I will be happy to have a look at your account and see what the story is.
Could you drop me an email to [email protected]
Please include your BT account and telephone number and a link back to this thread.
Cheers
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

I recently installed older version of Imovie and final cut pro free trial now imovie 11 wont open what do I do?

I recently installed older version of Imovie and final cut pro free trial now imovie 11 wont open what do I do?

Do you mean that the old version of iMovie (which version?) worked until you installed the FCP trial?
Note that you can only transfer projects from the latest version of iMovie (10) to FCP 10.1
Geoff.

Dreamweaver 8 not supported by my new iMac. Now what?

I recently purchased a new iMac OS 10.8.3. I have 5 years of work and loads of images for my fine arts business on my personal website which I built using Dreamweaver 8. Now my new computer says it does not support Dreamweaver 8. Must I have to purchase Dreamweaver CS6 which is about $400 and if I do will I be able to once again continue using all of the data, etc. that I have put into my website using Dreamweaver 8 or do I have to start over? I don't want to change anything and don't want a fancy website with flash, etc. I just want to keep using Dreamweaver with my website the way it was.

Some things have changed with CS6 from DW 8 so it's possible some features may have moved, may not have existed, and there is a great deal of CSS and other enhancements added. In all your site will work, or at the very least if a feature was removed, users here could still help you get the code working. Also you could consider the Cloud purchase of $19/month or $239.88/yr.

HP "Support" does not know how to perform "regionalization reset", now what?

I buy a dual voltage OfficeJet 4620 in Germany in Ferbruary 2013.
NOWHERE in the product literature does it mention the ink cartridges are regionalized (defeats the purpose of even manufacturing a 110-220v device! But I digress).
I move to Florida in June and yesterday my black ink begins to run out.
The printer needs the "regionalization reset" which can only be performed by HP support, as stated by their own webpage:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02558798
Another description of it here:
http://www.fixya.com/support/t156381-change_region_code_ink_cartridges
I call HP support, and waste over an hour and a half with a girl in the Phillipines until she finally tells me that I need a complete set of USA ink cartridges in order to perfom the procedure (which appears to be not true, you do not need them to reset the printer, but rather it appears you need them simply if you wish to print anything after the reset was performed if for no other reason but to verify that the reset was successful). She claims HP support will call me this morning at 11AM EST. They did not call.
I call HP "Support" at 1130 EST and go through the wickets with them again. This time the girl does not know what to do and is clearly completely unknowledgeable about the product, mush less how to troubleshoot it, and instead she is simply following a script. Another hour wasted. After being put on hold for the 4th or 5th time for 15 minutes, I simply hang up. (Realizing later that this is an intentional strategy.)
I call again. Now I am speaking to some guy in India. He does not know what he is doing either and tries to guide me through the support menu on the printer itself, but his script does not match the menu options on the printer. Back to the 15 minute intervals of hold broken up by him saying "one minute please sir while I verify some information". Another hour wasted, until I finally begin to realize that none of these people know what to do.
Still I call back and get another guy who leads me into the Support menu (press the return button 4 times to access this menu) . The he has me go to the Reports Menu and select the "print mech button tap" option, which prints out a 2 page "Printer Hardware" printout. He asks me to "give him the numbers on the document, but the document has all sorts of numbers on it from serial numbers to product numbers to other numbers with labels that are simply abbreviations. I ask him which numbers he needs from the two pages full of numbers, and back on hold I go for 20 minutes. He comes back and says "the long number, there should be a long number". Well the longest number on the document is the Serial number which I have already given during the initial information polling he did and so I ask him if he needs it again. Back on hold i go for another 20 minutes. Now the 15-20 minute hold cycle resumes, with him "checking something" and he will "be right back". Eventually he simply clicks over to see if I am still on the line and immediately puts me back on hold without saying anything. I put my phone on speaker and I wait him out, having already wasted an entire morning and half my afternoon.
Now this was the best part....HE BEGINS TO PRETEND LIKE HE IS HAVING MICROPHONE PROBLEMS AND CANNOT HEAR ME (yes I know, what does his microphone have to do with hearing me, I had the same thought). It is obvious he has simply either taken his headset off his head or moved the mic far away from his mouth and is pretending he can't hear me and that he will call me back and asks for my number. I ask him how is he going to hear me tell him my number (which by the way he already took at the beginning of the conversation) and he continues his ruse. So I hang up. It is obvious he doesnt know what to do and no one else there is going to help me.
Now I call back tonight around 930PM EST, and I get the Phillipines again. I go trough the whole polling phase with the girl and explain to her that I need the regionalization reset performed, and that all I need is to know which numbers of my printer to give to HP Support so that they can give me the code I need to reset this device. I politely tell her that I understand if she does not know what to do or understand what the procedure is and that I will not be angry with her if she is simply honest and tells me so, but that I want her to tell me if there is anyone there where she works who will definitely know how to do the reset, a supervisor or actual technical advisor, anybody. She is friendly and honest and says this is the frst time she has heard of this and she will ask what to do. Back on hold for 5 or 10 minutes. She claims she is looking in her "resources" for the way to do this. Nothing. I ask her to please stop and get her supervisor, she claims she is checking with her supervisor and that they are "checking the resources" for the procedure to reset regionalization. I foolishly think we are making progress.
After 20 minutes of her constantly telling me she is checking her resources, even after I have told her what the procedure entails and that all she needs to do is find the procedure and tell me which numbers it requires from the device itself in order to provide the reset code, I tell her to stop what she is doing and put her supervisor on the phone. She stalls. She says she is sorry but they have never heard of this procedure before and that she will schedule me a call-back for tomorrow. YEAH RIGHT. I ask her WHO is going to call me tomorrow? She replies that it will be them and that they will have the answer. I tell her that I already heard that from them the night before and I dont have another day to be wasted. I tell her to put her supervisor on the phone and I want the name of whoever is in charge of her office. She tries to ignore me and continues to ask for my phone number (which she already has). I press her for the name of who is in charge and she finally claims "Peter" is the supervisor. I tell her to put "Peter" on the phone. 10 minutes of hold and later a guy picks up the line, claims he is "Peter" and asks how I am doing. I politely say I am well and I ask him for his last name. He asks why I need his last name. i repeat my question, "What is your last name Peter?"..........his reply? "hello, sir? I am having trouble hearing you, can you hear me?" He begins to play with the microphone and puts me on hold. Each time he picks up and asks if I am there I immediately ask him for his last name, to which he resumes the ruse that he cannot hear me. I stay on the line. At this point it appears that HP must have some sort of policy where their "Support" personnel are not allowed to hang up the phone first, perhaps it is even tracked as a half-assed internal method of "Quality Assurance", and these people know it and this is why they will leave you on hold for ever and wait until you hang up. So, I wait Peter out for about 10 minutes, I am not on hold because there is no music, the microphone is simply muted. I tell him i know he is there and can hear me, and that i know he cannot hang up first, and then he promptly hangs up.
SO, my question....
NOW WHAT?
How does anything get escalated at HP when their overseas "Support" doesn't know what to do?
I live in Miami and there is a corporate headquarters there for HP Latin America. I am thinking of walking right into the lobby and finding someone with authority, but in all honesty I just want the d*** printer region reset so I can use these ink cartridges I already bought and opened.
Suggestions?

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

Everything is very small, text, pics, programs dont even fill 1/4 of a page I can not read it and if i click apple plus things overlap each other so now what???

everything is very small, text, pics, programs dont even fill 1/4 of a page I can not read it and if i click apple plus things overlap each other so now what???

Can you think of any recent changes on your computer or in Firefox, new programs, add-ons, etc.?
Have any cats walked across your keyboard recently?
My first guess is the same as yours, which is a "zoom" issue. Holding down the Command key and pressing 0 (zero) should reset the zoom level of the current site to the standard level. Is that still too small?
Regarding content overlapping, this can occur for a few different reasons. Please check on these:
(1) "Text Only" zoom
If View menu > Zoom > Zoom Text Only has a checkmark, click it again to unselect it.
(2) Manually setting font sizes
In the Preferences dialog (either the "3-bar" menu button or the Firefox menu) > Content > "Advanced" button
If the Minimum font size is set to a number larger than 9, change it to 9 or None. A large minimum font size often will wreck the layout.
At the top, there is "Fonts for" drop-down that usually will say Latin or Other Writing Systems. You will want to make the same change for both of those, so select whichever one isn't currently displayed.
Finally, make sure the checkbox for "Allow pages to choose their own fonts" is checked and OK out of the dialog.
Any difference so far?

Tried to buy more and lost everything. Now What?

I finally got what I bought last night on my ipod. So I purchased more tonight and in the process of trying to figure out what to do ( I thought it would download songs auto if hooked up) it ended up restoring my ipod to factory settings and then restoring my info, but it deleted the songs from last night and I never got the other 24 from tonight. A total of 50 songs. I was just starting to like this and now this happened. Now what?

Downloading past purchases from the App Store ... - Support - Apple

Server is setup, now what?

As I posted last week I am in the throes of transition from 2 stand-alone edit stations to 3 clients and Final Cut Server. My server is a Mac Pro xenon Tower that I have put a 120G SSD drive into the empty optical bay to be the boot/app drive running Snow Leopard, FCPServer, and FCP for ingest and occaisional FCP duties. The server has 4 2T drives in the internal bays setup as 2 Raid 1 storage devices, The clients are 27"iMacs on a gigabit ethernet network.
Now what do I do? I have the client software on the iMacs and can log in and see some assets. What I need to be enlightened on is the actual workflow. How do I start a "production"? How to I transfer existing FCP projects and the various elements into the server? How do I make them into a "production:? Where exactly do I put them? The amazing thing about this process is that there seems to be so much that is assumed by whoever wrote the documentation, and there is no info on how to actually USE the FCServer. If there is online documents about this I would appreciate any guidance. Thanks......

In more detail I guess I having a bit of a brain **** about the structure of FCPServer. The folders created for Library, Media etc. What goes there and how do I get it in? For example I have a bunch of video clips and stills that were provided by a client. How do I get them into the FCPS system?

Trying to make a Xmas Card in iPhoto. When card is made I hit "Buy Card", but I get "card incomplete" because it says there are empty photo templates that haven't been filled. Only they have all been filled. There are no empty ones left to fill! Now what?

Trying to make a Xmas Card in iPhoto on my Mac i5. When card is made I hit "Buy Card", but I get "card incomplete" because it says there are empty photo templates that haven't been filled. Only I have filled them all!. There are no empty ones left to fill! Now what?
Thanks for the help.

Only I have filled them all!. There are no empty ones left to fill! Now what?
Some text do look like they were final texts, that cannot be filled, but they are also place holders, for example the "Season's Greetings".Have you really clicked on each and every text, to see if they need filling in?

I built a 800 x 600 website in Dreamweaver. I now want it 1024 x 768. Can that be done without rebuilding the website?

I built a 800 x 600 website in Dreamweaver. I now want it 1024 x 768. Can that be done without rebuilding the website?

Dave,
This is my css, what should I do?
body
.copy {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     color: #7B7979;
     text-decoration: none;
.select {
     font-family: Tahoma;
     font-size: 10px;
     line-height: 12px;
     color: #7D7D7D;
     background-color: #FFFFFF;
     height: 17px;
     width: 106px;
     border: 1px solid #CDCDCD;
.text_1 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     color: #886600;
.text_2 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 13px;
     color: #828282;
.link_1 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     color: #5C89C9;
.form_1 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     background-color: #FFFFFF;
     height: 17px;
     width: 228px;
     border-top-width: 1px;
     border-right-width: 1px;
     border-bottom-width: 1px;
     border-top-style: solid;
     border-right-style: solid;
     border-bottom-style: solid;
     border-top-color: #616161;
     border-right-color: #D4D0C8;
     border-bottom-color: #D4D0C8;
.form_2 {
     font-family: Tahoma;
     font-size: 11px;
     line-height: 12px;
     background-color: #FFFFFF;
     height: 65px;
     width: 228px;
     border-top-width: 1px;
     border-right-width: 1px;
     border-bottom-width: 1px;
     border-top-style: solid;
     border-right-style: solid;
     border-bottom-style: solid;
     border-top-color: #616161;
     border-right-color: #D4D0C8;
     border-bottom-color: #D4D0C8;
     overflow:auto;

Using mountain lion operating system, downoaded iphoto 9.4 update, aperature 3.4.3 update and still cannot access photo stream. now what??

Using mountain lion operating system, downoaded iphoto 9.4 update, aperature 3.4.3 update and still cannot access photo stream. now what??

With Aperture, you should be able to use Photo Stream now, but you need iPhoto 9.4.2 > http://support.apple.com/kb/DL1608
After updating iPhoto to the latest version, open System Preferences > iCloud and tick Photo Stream. Finally, you will have to turn on Photo Stream on iPhoto and Aperture choosing Photo Stream on the sidebar of both programmes

G3 imac HD found using firewire target - NOW WHAT?

I finally can see my HD in my G3-600 imac. Had the folder at startup and tried all methods to see the HD. I can now finally see it using FW target. I used Diskwarrior on it and copied all contents off of it. Tried starting up but still same folder at startup. NOW WHAT? Do I reformat? Is it the controller? Any help would be appreciated.

Robb 1,
Well you got the info off so that's good. Were you able to graph the drive? any flaws?
If it looks good you should probably reformat it and check SMART to see if it's ok.
Then if all's well you could reinstall your OS but be aware it went bad before so it would be suspect as far as I'm concerned.
Richard

Got XMLBeans - Now What?

As a new userof Workshop, I'm having a bit of trouble coming up to speed with XMLBeans.
Gettting a schema to compile was easy enough. That process is well documented.
But
now what?
For starters, the schema compile produced the following warning:
WARNING: Note: Some input files use or override a deprecated API.
WARNING: Note: Recompile with -deprecation for details.
I'd like to know what the issue is, but recompile what? I can only find a new
jar
file (containing no source) resulting from the process. If there is any source
left over
from the generation process, I can't find it.
Next, how can I see what's in the generated classes? I know there are predictable
classes/methods generated in the production of the XMLBeans, but it sure would
make things easier if there were some kind of source code to refer to or some
generated
doc. specifying what I've got available to work with.
Finally, the tutorial examples skim over what the requriements for imports are.
Maybe I'm just dumb, but I really can't figure out from the examples what's
needed for import in my own code to work with my newly generated XMLBean.
Any help will be appreciated.
Thanks.

@chrisaaaaa
Have you contacted Sony yet?
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Finally abandoning Dreamweaver 1.2... now what?

Similar Messages

Maybe you are looking for