Find all packages that are in cache but not installed? [solved]

Is this possible? Basically, I copied over my /var/cache/pacman/pkg from another machine to a fresh install to save re-downloading 1+ gigs of packages. Can pacman compare the installed packages to those in cache so I can see what I forget to install on the new machine (I got most of them)!
Last edited by graysky (2009-08-23 09:43:41)

The answer to your question is probably something along the lines of:
for pkg in /var/cache/pacman/pkg/*$(uname -m).pkg.tar.gz; do [[ -e /var/lib/pacman/local/$(basename ${pkg%-*}) ]] || echo $(basename $pkg); done
However, I'd suggest another approach. Create a list of explicitly installed packages on both systems and compare them.
To generate a list of explicitly installed packages you can use (on each machine):
pacman -Qeq >packages
And then you can easily compare the two lists with:
diff -up packages1 packages2

Similar Messages

I'm not sure if my iPhoto library is being backed up by Time Machine. I am backing up to a LaCie external hard drive. I can open photos that are in folders but not those that are in iPhoto.

I'm not sure if my iPhoto library is being backed up by Time Machine. I am backing up to a LaCie external hard drive. I can open photos ont the hard drive that are in folders but not those that are in iPhoto.

Do a restore from Time Machine. That will tell you.

Is it dangerous to upgrade not all packages that are available...

Is it dangerous to upgrade not all the packages that are available for upgrade?
May it crash something which is not easy/possible to fix without reinstalling the whole system?

Mr. Alex wrote:What if I haven't upgrade Arch for 2 years and after this time I upgrade only kernel. Can it cause any system damage/instability?
If you are asking such questions Arch is most likely not the answer. And yes, user space programs might be too old for the new kernel or pacman might just not work in the first place due to other changes on our side.

How to find all tables that are associated with a given domain name.

I want to find all table, excluding the structures, of a given domain name, say, waers.
Some of the tables are directly contains the domains while others are related with a data element which is connected to that domain.
I want to find tables for all two case -either tables connected directly to the domain or connected via data element- and exclude the structures.
thanks in advance.

Hi,
The following thing may help you.
in se11-> search for tables having names like 'DD*'.
From this list of tables you can find the required table to get domain, data element nad table name.
one way of doing it:
SELECT rollname domname
FROM dd04l
INTO CORRESPONDING FIELDS OF TABLE it_tab.
SELECT rollname tabname
FROM dd03l
INTO CORRESPONDING FIELDS OF TABLE it_tab1
FOR ALL ENTRIES IN it_tab
WHERE rollname = it_tab-rollname.
SORT it_tab1.
DELETE ADJACENT DUPLICATES FROM it_tab1.
LOOP AT it_tab1 INTO wa_tab.
MODIFY it_tab FROM wa_tab
TRANSPORTING tabname
WHERE rollname = wa_tab-rollname.
ENDLOOP.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-domname,
wa_tab-tabname.
ENDLOOP.
Regards,
Manoj Kumar P

SQL query to find all suites that are associated with automation

I trying to incorporate CodeUI tests into a Release Mangement deployment template ... As a developer, I want to be able to specify a sub-tree of a test plan & only execute those test suites that are associated with automation. Is there a way to
extract all automated workitems and associated them with their respective test suites?
Any assistance would be greatly appreciated!

John,
I've partially resolved the issue of executing a sub-set of suites with the following powershell implementation:
1. Extract "potential" suite paths from a XML configuration file:
<?xml version="1.0"?>
<Configurations>
<Properties>
<Property key="DEFAULT" value="SuitePaths" />
<Property key="DatabaseServer" value="MYDBSERVER" />
<Property key="DatabaseInstance" value="Default" />
<Property key="DatabaseName" value="TFS_DefaultCollection" />
<Property key="ConfigurationName" value="US - Windows 7 and IE 10" />
</Properties>
<Notifications>
<Notification key="0" value="[email protected]" />
</Notifications>
<SuitePaths>
<SuitePath key="0" value="MyProject\WebProduct\Student\Features\Login" />
<SuitePath key="1" value="MyProject\WebProduct\Student\Features\Logout" />
</SuitePaths>
<AreaPaths>
<AreaPath key="0" value="MyProject\WebProduct\Student\Features\Login" />
</AreaPaths>
</Configurations>
2. Extract record set of suites from TFS via SQL query:
# FUNCTION: Retrieve-SuitePaths
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) Paths -- Hash table of suite paths
Function Retrieve-SuitePaths
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)]$Paths
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve suite(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$SuitePaths = "("
$Counter = 0
foreach ($Key in $Paths.Keys)
if ($Counter -gt 0)
$SuitePaths = $SuitePaths + ", "
$SuitePaths = $SuitePaths + "'" + $Paths.Get_Item($Key) + "'"
$Counter += 1
$SuitePaths = $SuitePaths + ")"
# --DEBUG ONLY--> Write-Output "Paths: $SuitePaths" | Out-File -FilePath $LogFile -Append
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_SuiteChildren
AS
-- Anchor definition to pull all certify modes
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
CONVERT(NVARCHAR(256), NULL) AS ParentTitle,
S.[Title],
0 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
WHERE
S.ParentSuiteID = 0
UNION ALL
-- Recursive member to pull details of certify sessions
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
PS.[Title] AS ParentTitle,
S.[Title],
SC.[RecurseLevel] + 1 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN cte_SuiteChildren AS SC on SC.SuiteID = S.ParentSuiteID
INNER JOIN [dbo].[tbl_Suite] AS PS ON SC.SuiteId = PS.SuiteId
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
cte_SuiteLevel_0
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[ProjectName] + '\' + SC.[PlanName] AS Path,
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 0
cte_SuiteLevel_1
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 1
cte_SuiteLevel_2
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 2
cte_SuiteLevel_3
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 3
cte_SuiteLevel_4
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 4
cte_SuiteLevel_5
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 5
cte_SuiteLevel_6
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 6
cte_SuiteLevel_7
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 7
cte_SuiteLevel_8
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 8
cte_SuiteLevel_9
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 9
cte_SuiteLevel_10
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 10
cte_Suites
AS
SELECT
SL0.[ProjectId],
SL0.[PlanId],
CASE
WHEN SL2.ParentSuiteId IS NULL
THEN SL1.ParentSuiteId
ELSE CASE
WHEN SL3.ParentSuiteId IS NULL
THEN SL2.ParentSuiteId
ELSE CASE
WHEN SL4.ParentSuiteId IS NULL
THEN SL3.ParentSuiteId
ELSE CASE
WHEN SL5.ParentSuiteId IS NULL
THEN SL4.ParentSuiteId
ELSE CASE
WHEN SL6.ParentSuiteId IS NULL
THEN SL5.ParentSuiteId
ELSE CASE
WHEN SL7.ParentSuiteId IS NULL
THEN SL6.ParentSuiteId
ELSE CASE
WHEN SL8.ParentSuiteId IS NULL
THEN SL7.ParentSuiteId
ELSE CASE
WHEN SL9.ParentSuiteId IS NULL
THEN SL8.ParentSuiteId
ELSE CASE
WHEN SL10.ParentSuiteId IS NULL
THEN SL9.ParentSuiteId
ELSE SL10.ParentSuiteId
END
END
END
END
END
END
END
END
END AS [ParentSuiteId],
CASE
WHEN SL2.SuiteId IS NULL
THEN SL1.SuiteId
ELSE CASE
WHEN SL3.SuiteId IS NULL
THEN SL2.SuiteId
ELSE CASE
WHEN SL4.SuiteId IS NULL
THEN SL3.SuiteId
ELSE CASE
WHEN SL5.SuiteId IS NULL
THEN SL4.SuiteId
ELSE CASE
WHEN SL6.SuiteId IS NULL
THEN SL5.SuiteId
ELSE CASE
WHEN SL7.SuiteId IS NULL
THEN SL6.SuiteId
ELSE CASE
WHEN SL8.SuiteId IS NULL
THEN SL7.SuiteId
ELSE CASE
WHEN SL9.SuiteId IS NULL
THEN SL8.SuiteId
ELSE CASE
WHEN SL10.SuiteId IS NULL
THEN SL9.SuiteId
ELSE SL10.SuiteId
END
END
END
END
END
END
END
END
END AS [SuiteId],
SL0.ProjectName,
SL0.PlanName,
--SL0.Path,
--SL1.[Title],
CASE
WHEN SL2.Title IS NULL
THEN SL0.Path + '\' + SL1.Title
ELSE CASE
WHEN SL3.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title
ELSE CASE
WHEN SL4.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title
ELSE CASE
WHEN SL5.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title
ELSE CASE
WHEN SL6.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title
ELSE CASE
WHEN SL7.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title
ELSE CASE
WHEN SL8.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title
ELSE CASE
WHEN SL9.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title
ELSE CASE
WHEN SL10.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title
ELSE SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title + '\' + SL10.Title
END
END
END
END
END
END
END
END
END AS Path,
CASE
WHEN SL2.RecurseLevel IS NULL
THEN SL1.RecurseLevel
ELSE CASE
WHEN SL3.RecurseLevel IS NULL
THEN SL2.RecurseLevel
ELSE CASE
WHEN SL4.RecurseLevel IS NULL
THEN SL3.RecurseLevel
ELSE CASE
WHEN SL5.RecurseLevel IS NULL
THEN SL4.RecurseLevel
ELSE CASE
WHEN SL6.RecurseLevel IS NULL
THEN SL5.RecurseLevel
ELSE CASE
WHEN SL7.RecurseLevel IS NULL
THEN SL6.RecurseLevel
ELSE CASE
WHEN SL8.RecurseLevel IS NULL
THEN SL7.RecurseLevel
ELSE CASE
WHEN SL9.RecurseLevel IS NULL
THEN SL8.RecurseLevel
ELSE CASE
WHEN SL10.RecurseLevel IS NULL
THEN SL9.RecurseLevel
ELSE SL10.RecurseLevel
END
END
END
END
END
END
END
END
END AS RecurseLevel
FROM
cte_SuiteLevel_0 AS SL0
LEFT OUTER JOIN cte_SuiteLevel_1 AS SL1 ON SL1.ParentSuiteId = SL0.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_2 AS SL2 ON SL2.ParentSuiteId = SL1.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_3 AS SL3 ON SL3.ParentSuiteId = SL2.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_4 AS SL4 ON SL4.ParentSuiteId = SL3.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_5 AS SL5 ON SL5.ParentSuiteId = SL4.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_6 AS SL6 ON SL6.ParentSuiteId = SL5.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_7 AS SL7 ON SL7.ParentSuiteId = SL6.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_8 AS SL8 ON SL8.ParentSuiteId = SL7.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_9 AS SL9 ON SL9.ParentSuiteId = SL8.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_10 AS SL10 ON SL10.ParentSuiteId = SL9.SuiteId
SELECT
SS.[ProjectId],
SS.[PlanId],
SS.[ParentSuiteId],
SS.[SuiteId],
SS.[ProjectName],
SS.[PlanName],
SS.[Path],
SS.[RecurseLevel]
FROM
SELECT DISTINCT
S.[ProjectId],
S.[PlanId],
S.[ParentSuiteId],
S.[SuiteId],
S.[ProjectName],
S.[PlanName],
S.[Path],
S.[RecurseLevel]
FROM
cte_Suites AS S
WHERE
S.[RecurseLevel] IS NOT NULL
AND S.[Path] IN $($SuitePaths)
) AS SS
ORDER BY
SS.[Path]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 240
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
3. Execute every suite in the record set via TCM
$DataSet = ( Retrieve-SuitePaths -LogFile:$LogFile -Connection:$Connection -Path:$Paths)
# --DEBUG ONLY--> $DataSet.Tables[0].Rows.Count
# --DEBUG ONLY--> $DataSet.Tables[0]
# Determine whether or not any test suites were retrieved from TFS....
if ( $DataSet.Tables[0].Rows.Count -gt 0 )
$ListTestRunID = $null
$SumFailed = 0
$SumInconclusive = 0
foreach ($Row in $DataSet.Tables[0].Rows)
# Set project, plan & suite variables....
[Int16]$ProjectID = $Row.Item('ProjectId')
[Int16]$PlanID = $Row.Item('PlanId')
[Int16]$ParentSuiteID = $Row.Item('ParentSuiteId')
[Int16]$SuiteID = $Row.Item('SuiteId')
$ProjectName = $Row.Item('ProjectName')
$PlanName = $Row.Item('PlanName')
$Path = $Row.Item('Path')
$RecurseLevel = $Row.Item('RecurseLevel')
# Set local build path variable....
switch -wildcard ($Path)
"*WebCMS*\Administration\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Administration'
"*WebCMS*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Instructor'
"*WebCMS*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Student'
"*WebProduct*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Instructor'
"*WebProduct*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Student'
default
$CUITBuildPath = $CUITPathUNC
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output 'Test Suite:' | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output " ID:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectID" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanID" | Out-File -FilePath $LogFile -Append
Write-Output " Parent Suite: $ParentSuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $SuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationID" | Out-File -FilePath $LogFile -Append
Write-Output " Name:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectName" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanName" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationName" | Out-File -FilePath $LogFile -Append
Write-Output " Path:" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $Path" | Out-File -FilePath $LogFile -Append
Write-Output " Build: $CUITBuildPath" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> Write-Output " Recursion: $RecurseLevel" | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
# Set TCM arguements....
$ArguementPlanID = "/planid:$PlanID"
$ArguementTitle = "/title:$Title - $Path (SuiteID: $SuiteID)"
$ArguementSuiteID = "/suiteid:$SuiteID"
$ArguementConfigurationID = "/configid:$ConfigurationID"
$ArguementTFSCollection = "/collection:$TFSCollection"
$ArguementTeamProject = "/teamproject:$TFSTeamProject"
if(![string]::IsNullOrEmpty($CUITBuildPath))
$ArguementBuildDirectory = "/builddir:$CUITBuildPath"
$ArguementBuild = ""
$ArguementBuildDefinition = ""
else
$ArguementBuildDirectory = ""
$ArguementBuild = "/build:$TFSBuild"
$ArguementBuildDefinition = "/builddefinition:$BuildDefinition"
$ArguementTestEnvironment = "/testenvironment:$WebServer"
$ArguementSettingsName = ""
if(![string]::IsNullOrEmpty($SettingsName))
$ArguementSettingsName = "/settingsname:$SettingsName"
# Create test run....
Write-Host "$TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName"
Write-Output " $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName" | Out-File -FilePath $LogFile -Append
try
$TestRunID = & $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTeamProject $ArguementTFSCollection $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName
catch
$ExitMessage = $_Exception.Message
# --DEBUG ONLY--> Write-Output "TestRunID: $TestRunID" | Out-File -FilePath $LogFile -Append
if ($TestRunID -match '.+\:\s(?<TestRunID>\d+)\.')
# The test run ID is identified as a property in the match collection so we can access it directly by using the group name from the regular expression (i.e. TestRunID).
$TestRunID = $matches.TestRunID
$ArguementID = "/id:$TestRunID"
$TestRunResultsFile = $TempDirectory + "\TestRunResults$TestRunID.trx"
$ArguementQueryText = "/querytext:SELECT * FROM TestRun WHERE TestRunID=$TestRunID"
$ArguementResultsFile = "/resultsfile:""$TestRunResultsFile"""
Write-Host " Waiting for test run to complete ..."
Write-Host $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
Write-Output " $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunCompletion = $true
$WaitCount= 0
while ($WaitingForTestRunCompletion)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
Start-Sleep -s $TestRunWaitDelay
$TestRunStatus = & $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
$TestRunStatus
if ($TestRunStatus.Count -lt 3 -or ($TestRunStatus.Count -gt 2 -and $TestRunStatus.GetValue(2) -match '.+(?<DateCompleted>\d+[/]\d+[/]\d+)'))
$WaitingForTestRunCompletion = $false
Write-Host "Evaluating test run $TestRunID results..."
# Take small pause(s) since the results might not be published yet....
Start-Sleep -s $TestRunWaitDelay
# Export results....
Write-Host $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile
Write-Output " $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunExport = $true
$WaitCount= 0
while ($WaitingForTestRunExport -and $WaitCount -lt 5)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
$ExportResult = & $TCMEXE 'run' '/export' $ArguementID $ArguementResultsFile $ArguementTFSCollection $ArguementTeamProject
if ([System.IO.File]::Exists($TestRunResultsFile))
$WaitingForTestRunExport = $false
if ([System.IO.File]::Exists($TestRunResultsFile))
# Load the XML document contents.
[xml]$TestResultsXML = Get-Content "$TestRunResultsFile"
# Extract the results of the test run.
$TotalTests = $TestResultsXML.TestRun.ResultSummary.Counters.total
$PassedTests = $TestResultsXML.TestRun.ResultSummary.Counters.passed
$FailedTests = $TestResultsXML.TestRun.ResultSummary.Counters.failed
$InconclusiveTests = $TestResultsXML.TestRun.ResultSummary.Counters.inconclusive
# Output the results of the test run.
Write-Host "========== Test: $TotalTests tests ran, $PassedTests succeeded, $FailedTests failed, $InconclusiveTests inconclusive =========="
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output "Summary:" | Out-File -FilePath $LogFile -Append
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output " Total: $TotalTests" | Out-File -FilePath $LogFile -Append
Write-Output " Passed: $PassedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Failed: $FailedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Inconclusive: $InconclusiveTests" | Out-File -FilePath $LogFile -Append
$SumFailed += $FailedTests
$SumInconclusive += $InconclusiveTests
# Remove the test run results file.
[System.IO.File]::Delete($TestRunResultsFile) | Out-Null
# Add "current" TestRunID to the list of TestRunID(s)....
if ($ListTestRunID -ne $null)
$ListTestRunID = $ListTestRunID + ', '
$ListTestRunID = $ListTestRunID + $TestRunID
# Next test suite....
4. Extract record set of test runs from TFS via SQL query:
# FUNCTION: Retrieve-TestRuns
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRuns
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test run(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_State
AS
SELECT 0 AS [StateID], 'Unspecified' AS [StateName]
UNION ALL
SELECT 1 AS [OutcomeId], 'To Be Determined (1)' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'Aborted' AS [StateName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [StateName]
UNION ALL
SELECT 6 AS [StateID], 'Needs Investigation' AS [StateName]
SELECT
TR.[ProjectId] AS [Project Id],
P.[ProjectName],
TR.[TestPlanId] AS [Plan Id],
TP.Name AS [TestPlanName],
TR.[TestRunId] AS [Run Id],
TR.[Title],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[StartDate] AS [Date Started],
TR.[CompleteDate] AS [Date Completed],
DATEDIFF(SECOND, TR.[StartDate], TR.[CompleteDate]) AS Duration,
TR.[Type],
TR.[IsAutomated],
TR.[TotalTests] AS [Total],
TR.[PassedTests] AS [Passed],
TR.[IncompleteTests] AS [Incomplete],
TR.[UnanalyzedTests] AS [Unanalyzed],
TR.[NotApplicableTests] AS [Not Applicable]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestRun] AS TR
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Project] AS P ON TR.ProjectId = P.ProjectId
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Plan] AS TP ON TR.TestPlanId = TP.PlanId
INNER JOIN cte_State AS S ON TR.[State] = S.[StateID]
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[StartDate]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
5. Extract record set of test results from TFS via SQL query:
# FUNCTION: Retrieve-TestRunResults
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRunResults
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test result(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_Outcome
AS
SELECT 0 AS [OutcomeId], 'To Be Determined (0)' AS [OutcomeName]
UNION ALL
SELECT 1 AS [OutcomeId], 'In Progress' AS [OutcomeName]
UNION ALL
SELECT 2 AS [OutcomeId], 'Passed' AS [OutcomeName]
UNION ALL
SELECT 3 AS [OutcomeId], 'Failed' AS [OutcomeName]
UNION ALL
SELECT 4 AS [OutcomeId], 'Inconclusive' AS [OutcomeName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [OutcomeName]
UNION ALL
SELECT 6 AS [OutcomeId], 'Aborted' AS [OutcomeName]
UNION ALL
SELECT 7 AS [OutcomeId], 'Blocked' AS [OutcomeName]
UNION ALL
SELECT 8 AS [OutcomeId], 'Not Executed' AS [OutcomeName]
UNION ALL
SELECT 10 AS [OutcomeId], 'Error' AS [OutcomeName]
UNION ALL
SELECT 11 AS [OutcomeId], 'Not Applicable' AS [OutcomeName]
UNION ALL
SELECT 12 AS [OutcomeId], 'Paused' AS [OutcomeName]
UNION ALL
SELECT 13 AS [OutcomeId], 'To Be Determined (13)' AS [OutcomeName]
UNION ALL
SELECT 255 AS [OutcomeId], 'Never Run' AS [OutcomeName]
cte_State
AS
SELECT 0 AS [StateID], 'None' AS [StateName]
UNION ALL
SELECT 1 AS [StateID], 'Ready' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Not Ready' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 5 AS [StateID], 'To Be Determined' AS [StateName]
SELECT DISTINCT
TR.[TestRunId] AS [Run Id],
TR.[TestCaseId] AS [Case Id],
O.[OutcomeID] AS [Outcome Id],
O.[OutcomeName] AS [Outcome],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[TestCaseTitle] AS [Title],
TR.[AutomatedTestName] AS [Automation Method],
TR.[DateStarted] AS [Date Started],
TR.[DateCompleted] AS [Date Completed],
DATEDIFF(SECOND, TR.[DateStarted], TR.[DateCompleted]) AS Duration,
TR.[FailureType] AS [Failure Type],
TR.[ErrorMessage] AS [Error]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestResult] AS TR
INNER JOIN cte_Outcome AS O ON TR.Outcome = O.OutcomeID
INNER JOIN cte_State AS S ON TR.State = S.StateID
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[TestRunId],
O.[OutcomeName],
TR.[TestCaseTitle]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "SQL Statement: " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
6. Email results to distribution list
Currently, I'm simplifying the extraction of suite path ... replacing hardcoded depth with STUFF() & XML PATH
Carl.

How to find all routes that are going out an interface in IOS-XR.

Hi all,
So if I have the following set up in IOS:
interface GigabitEthernet7/0/0.265
encapsulation dot1Q 265
ip vrf forwarding test
ip address 1.1.1.1 255.255.255.252
ip verify unicast reverse-path
end
ip route vrf Apollo 2.2.2.0 255.255.255.248 1.1.1.2
I can see all the routes that are going out the interface using show ip cef command:
ios-router#show ip cef vrf test GigabitEthernet7/0/0.265
2.2.2.0/29
nexthop 1.1.1.2 GigabitEthernet7/0/0.265
1.1.1.0/30
attached to GigabitEthernet7/0/0.265
1.1.1.2/32
attached to GigabitEthernet7/0/0.265
In case of IOS-XR (ASR9K 4.3.2 or 4.3.1) the same setup and command shows only
attached routes:
router static
vrf test
address-family ipv4 unicast
   2.2.2.0/29 1.1.1.2
RP/0/RSP0/CPU0:TST_riga-sb7-pe-asr9#show cef vrf test bundle-ether2.265
Prefix              Next Hop            Interface
1.1.1.0/30          attached            Bundle-Ether2.2220333
1.1.1.0/32          broadcast           Bundle-Ether2.2220333
1.1.1.1/32          receive             Bundle-Ether2.2220333
1.1.1.2/32          1.1.1.2             Bundle-Ether2.2220333
1.1.1.3/32          broadcast           Bundle-Ether2.2220333
Is there any command to see all the routes that are going out an interface without complicated parsing
of the configuration, recursive show cef commands etc.?

You can accomplish this with the "show route" command. Here is an example:
P/0/RSP1/CPU0:ASR9006-E#sh route next-hop tenGigE 0/3/0/2
Tue Oct 8 15:34:58.046 UTC
Codes: C - connected, S - static, R - RIP, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - ISIS, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, su - IS-IS summary null, * - candidate default
       U - per-user static route, o - ODR, L - local, G - DAGR
       A - access/subscriber, - FRR Backup path
Gateway of last resort is 172.18.87.1 to network 0.0.0.0
D    10.95.248.1/32 [90/128512] via 10.129.56.210, 4d00h, TenGigE0/3/0/2
C    10.129.56.208/30 is directly connected, 4d00h, TenGigE0/3/0/2
L    10.129.56.209/32 is directly connected, 4d00h, TenGigE0/3/0/2
O    10.242.142.240/30 [110/20] via 10.129.56.210, 3d11h, TenGigE0/3/0/2
                       [110/20] via 10.129.56.214, 3d11h, TenGigE0/3/0/3
D    192.168.1.16/32 [90/128512] via 10.129.56.210, 4d00h, TenGigE0/3/0/2
D    192.168.20.39/32 [90/128512] via 10.129.56.210, 4d00h, TenGigE0/3/0/2
RP/0/RSP1/CPU0:ASR9006-E#
Thanks,
Bryan

How to Show All Packages, That are not required by any other package

I need a way to see al the installed packages thar are not required by any other package
Thanks in advance ...

You probably want pacman -Qt or pacman -Qdt
Check out man pacman.

Accessing computers that are turned on but not logged in

I have a network of about 60 win 7 Pro PCs, which are all on, but not always logged in. I would like to be able to access the shares on these machines at any time, but so far can only do so if the machine is logged in and active.
In XP, all the machine had be was on. How do I do this for Win 7?
Many thanks!

Accessing remote shared folders is not in conflict with the fact that any users is logged (or not logged). For connectivity only one port is opened (445).
You can do a research with network monitor to pinpoint what you need to open.
Rgds
Milos

Remove photos that are on 3gs but not showing on retreival to computer

I cannot remove photo from a 3gs iphone but the photos do not show when i try to sync on comp

iCloud doesn't back up your music, it only allows you to redownload any music previously purchased from the iTunes for free if you need to. Your music should be in your iTunes library on your computer, and can be synced back to your phone in the future if you need to. To save space by removing music, uncheck the songs in iTunes that you no longer want on your phone and sync it.
Your camera roll photos are included in your iCloud backup, but can't be viewed separately. They can only be accessed by restoring the entire backup to your phone if you ever need to. Photo stream photos are only kept in your photo stream for 30 days. After that they are removed from photo stream but not from any device that already has already received them from your photo stream. If you want to save space by removing photos, import them to your computer and delete them from your camera roll, as described here: http://support.apple.com/kb/HT4083.

How to download but not install OSX Mountain Lion on Mavericks

Hi all
I would like to download but not install OSX Mountain Lion on my MBP which is currently running OSX Mavericks.
This however seems impossible. I think OSX Mavericks were already installed on my MBP and therefore it seems "impossible" to download it.
Now, why would I to do this? The answer is quite reasonable, due to certain demands related to an application portfolio I need Mountain Lion, because the portfolio is not upgraded to run on Mavericks. And, it is more reasonable to downgrade a version of OSX, rather waiting for the portfolio upgrade which can take years.
Yes, I need to downgrade my secondary MBP which also came with preinstalled Mavericks. This can be done, if I only could download but not install Moutain Lion.
It should be easy enough; download Mountain Lion, make an installer and make a bootable thumb usb stick. Then erase Mavericks and install Mountain Lion.
I have previously bought Mountain Lion so it is accessible to me in the App Store, but whenever I try to hit the Download button, I get a message saying this can't be done, since I am running Mavericks.
This bugs me, it should be obvious users needs the flexibility to swap whatever OSX version they need. It is still software.
So, how can I download but not install Mountain Lion on my newer MBP that came with preinstalled Mavericks?
I would like to see answers like:
"In order to get this to work, you first have to disable the locking mechanism in [...] " instead of "No, this is impossible to do"
Regards

Thanks for your reply Eric
Can't help wondering thought, people are ok with this?
Basically Apple are saying: "Do not attempt to install an older version of OSX which came preinstalled. If so, expect multiple failures." Really?! Has it always been so? For me it's not like I'm going to install Snow Leopard on my Late 2013 Retina MBP, but I would expect some form of backward compatibility between the previous version and it successor. Apparently this is not possible, and how is this even acceptable?
Personally, I am not going to downgrade, as if I had a choice, but I would and I expected however, the possibility to at least download the previous OSX version. What do you do if you have bought several applications, not necessarily online from App Store and buy yourself a new Mac with preinstalled Mavericks and after installing your "old" applications they fail to work properly? What do you do since downgrading apparently is not an option. So... again, what do you do?
If you don't have friends with an older Mac, you could be facing serious problems. And I'm not talking about gaming, but serious business.
I find this quite disturbing actually, and please tell me it's not so. There gotta be a way to do this?
I simply want to download the OS but I expect some registry values (like windows' registry) keeps preventing this.
It should be possible to simply download and not download and install in one operation, shouldn't it?
Regards

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gs free

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gigabytes of additional space free. My mac now says I have 440 gigs of other that is used. But does not make sense, do I have a virus?

Since you have not identified the OS your MBP is using, these extract may or may not assist you.
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
You may also download from the Internet OmniDiskSweeper (free) and open it it will show all of the files on your MBP and the respective sizes.
ciao.

Since I updated my iPhone 4s to iOS 6 all messages that are sent to my phone from another iPhone user get sent to my daughters iPhone as well. And I can text her but she cannot text me.

What is going on??? Since I updated my iPhone 4s to iOS 6 all messages that are sent to my phone from another iPhone user also get sent to my daughters iPhone 4. And she can receive my text but cannot reply to me.

chrisfromgastonia wrote:
You are on the same apple id. You will need to each have your own apple id. Sign out of imessages and create your own or her own apple id and sign in again using your own apple id's
100% NOT TRUE.... You can change the settings to fit your requirements...

Cant get iMovie08 to show all photos that are in iphoto.

Can't get iMovie08 to show all photos that are in iphoto.
only shows about 30, when there are actually about 60 or so in one album.
any ideals?

Can't get iMovie08 to show all photos that are in iphoto... only shows about 30, when there are actually about 60 or so in one album... any ideals?
Do the photos display correctly in the media browser when the mail library ("iPhoto") heading is selected? If so, you could simply add the photos from the library rather than the specific album. Alternately, if you have to select your photos from an "album," you could try reselecting the photos in the main library in the iPhoto application and create a different album to see if all photos then show up in the secondary album in the iMovie media browser.
If the "missing" photos do not show up under the main "iPhoto" heading in the iMovie media browser and do not show up in the main library in the iPhoto application, then the files may be corrupted. In this case, simply re-import the original files if possible. You could also try to force a rebuilding of the thumbnail cache, but this is usually done automatically when the application itself detects inefficiencies in thumbnail access or when the application is updated. In any case, there does not appear to be a manual menu option to do this arbitrarily when the user so desires. I suppose you could try to locate and delete the cache manually and hope this forces an automatic rebuild the next time the iPhoto application is opened but I am personally not that familiar with the package structure to advise such action at this time. You might check the iPhoto forum and see if anyone can help you further in this area of endeavor.

Find all packages that are in cache but not installed? [solved]

Similar Messages

Maybe you are looking for