Find applied patches-Little Diff
Hai all,
How to find out the patches applied during a particular period..
I understand that this can be done through ad_bugs and OAM.. but lets say am applying a Fpack which internally applies so many small patches..so when ad_bugs is queried, it shows all the pacthes applied with that Fpack with the family pack. But any idea how I can retrieve only the physical patch applied..In otherwords, in the above scenario, the Fpack which is applied.
Any ideas
Kai
Message was edited by:
Ora.Kai
Kai,
Check the query in the following note.
If applied_flag returns N --> The patch was not applied with adpatch directly
If applied_flag returns Y --> The patch was applied with adpatch directly
Note: 472820.1 - How to check if a patch has been applyed with adpatch
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472820.1
Similar Messages
-
How to find versions of application server components to apply patches
Hi,
I have Oracle Application server 10.1.2.0.2 installed in my linux box.
under metalink.oracle.com
1. i read documentation Doc ID: 420061.1 in metalink about patches and i did find one patch# 5922120 for my application middletier.
but when i did a metalink search i did see some patches for my database version which were not critical
so if they are not critical and if my application server is working fine then do i need to apply these patches.
My application server version is 10.1.2.0.2
and my apalication server infrastructure version is 10.1.0.4.2
during my metalink searches i found the following patches which were uner normal priority. they are:
patch numbers: 5127390, 5094712, 5605377
Can someone guide me.
Bottom line is: do i need to apply these patches unless they are critical and they are requred for my applications.
Also i have one more basic question is
How do i find out individual component versions in my application server like Portal, discoverer, EM, EM agent, etc?
Thanks in advance,
Philip.
Message was edited by:
[email protected]Philip,
You have a similar environment to ours. We actually have two Oracle environments: 91) 10gDB 10.1.0.5 / 10gAS 9.0.4.3, and (2) 10gDB 10.2.0.3 / 10gAS 10.1.2.0.3.
In regards to what patches, I look at two items: the latest patchset for DB and AS, and the Critical Patch Updates(CPU). Often, the CPU will drive what patchset you will need to be at. For example, with the CPU April 2007, we had to move to patchset 3 for our AS (9.0.4.3) since that is the only 10gAS R1 that Oracle provided CPU patches.
As far as version ID, I have not found one single area to acquire this. For Portal, you can invoke Portal, http://host/pls/portal, logon as 'portal', then Administer, Global Settings, and at the bottom of the page is the version.
For other products like Forms and Discover, you can find the version when the tool is invoked.
Not quite as nice as the DB side where dba_registry will give you all the goodies.
Regards,
John -
Finding CPU Patch and PSU applied
hi all,
How do we find that which and when cpu and psu patches are applied. do we apply this for individual databases or for complete oracle software.
thank you!>
How do we find that which and when cpu and psu patches are applied. do we apply this for individual databases or for complete oracle software.
>
What version are you on and what version of opatch?
To find out what PSU's you have applied, you can do this at OS level
$> opatch lsinv -bugs_fixed | grep -i psu
From database (depending upon your version), you can do this to find all patches applied to your database:
col ACTION format a15
col NAMESPACE format a15
col version format a10
col COMMENTS format a42
col BUNDLE_SERIES format a20
col action_time format a30
select * from sys.registry$history;do we apply this for individual databases or for complete oracle software.
>
Some patches are for software only while some affect both software and database. This is very generic question/answer
Regards
Venkat -
Hi All,
Please some one help me how to find below the patches applied or not.
Patch 11i.CAC.B
Patch 11i.ALR.G
11i.JTA.F
AME PATCH :DELIVERY OF GA AND RULE PRIORITY FUNCTIONALITY.
I need urgent Please help me.
Thanks...Hi,
You can run below query to find out specific patch number:
select bug_id, bug_number from ad_bugs where bug_number='&no.';Also you can find out using OAM > Sitemap > Maintenance > Applied Patches - here search for specific patch
You can see all applied patches in you env using patchset.sh utility
Refer:
*Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]*
thanks,
X A H E E R -
I'm trying to apply patches to dbxml 2.2.13.
I'm pretty sure I'm alone in finding this tricky...but here goes:
Each patch seems to need some different -p arg to strip some arbitrary bit of the path. Am I missing something obvious here?
A couple (eg patch 6 shown below) don't work (I tried downloading using different browsers just in case they're not saving plaintext right)...
patch -p1 < ../patch.2.2.13.6
missing header for context diff at line 3 of patch
(Stripping trailing CRs from patch.)
patching file src/dbxml/nodeStore/NsEventGenerator.cpp
Hunk #1 FAILED at 357.
1 out of 1 hunk FAILED -- saving rejects to file src/dbxml/nodeStore/NsEventGenerator.cpp.rej
Again, I've not used patch before so apologies for being thick.Jacoby,
I think you're right. The patch files have somehow become inconsistent that way. The code portions are still correct.
I'll look into fixing this, but in the mean time, if you hand edit the patch files so that the relative paths to the individual files involved is consistent, they'll work better.
Regards,
George -
Internet Procurement responsibility error after applying patch
Hi Guru(s):
After applying patch 5156915 we get this errro when we select i Procrurment responsibility:
The POR SSP HOME function is not available under the Internet Procurement responsibility.
iProcurement is installed.
Any ideas would be most welcome thank you.
EBS 11.5.10
Edited by: Dan A on Dec 16, 2008 9:10 AMThanks yet again to Hussein.
I am a little worried that I couldnt find that same document.
I entered in ML "The POR SSP HOME function is not available" ....and that document did not appear.
Then I entered it with underscores : "The POR_SSP_HOME function is not available" ... and now I can see the doc.
How did you do your search?! I am guessing you used udnerscores or else something different? ? ?
Thanks, and still curious,
DA
By the way we are told to "clear" the _pages directory. I would do this with
cat /dev/null > oa_html , etc ?
Edited by: Dan A on Dec 16, 2008 9:44 AM -
Hello,
I have problem with applying patch on ACS 5.3. In release notes there is mentioned following command format:
acs patch install patch-name.tar.gpg repository repository-name
The problem is ACS 5.3 does't have this command syntax.
It does't have acs command.
Here is what i have trued:
acs/admin# patch install 5-3-0-40-1.tar.gpg rep
Do you want to save the current configuration ? (yes/no) [yes] ?
Generating configuration...
Saved the running configuration to startup successfully
% Manifest file not found in the bundle
repository rep
url ftp://172.30.5.217
user user password hash c7b11123e528660abea78d974339875394fbb234
Here is supported command that i found on ACS 5.3.
acs/admin# ?
Exec commands:
application Application Install and Administration
backup Backup system
backup-logs Backup system and application logs
clock Set the system clock
configure Enter configuration mode
copy Copy commands
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on local filesystem
exit Exit from the EXEC
forceout Force Logout all the sessions of a specific system user
halt Shutdown the system
mkdir Create new directory
nslookup DNS lookup for an IP address or hostname
patch Install System or Application Patch
ping Ping a remote ip address
reload Reboot the system
restore Restore system
rmdir Remove existing directory
show Show running system information
ssh SSH to a remote ip address
tech TAC commands
telnet Telnet to a remote ip address
terminal Set terminal line parameters
traceroute Trace the route to a remote ip address
undebug Disable debugging functions (see also 'debug')
write Write running system information
acs/admin#Hi,
I find this odd, can you run a "show application"
Here is the output of my ACS -
Version information of installed applications
Cisco ACS VERSION INFORMATION
Version : 5.3.0.40.4
Internal Build ID : B.839.EVAL
Patches :
5-3-0-40-2
5-3-0-40-4
gdtsrv-acs5/admin# ?
Exec commands:
acs ACS control commands
acs-config ACS config mode
application Application Install and Administration
backup Backup system
backup-logs Backup system and application logs
clock Set the system clock
configure Enter configuration mode
copy Copy commands
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on local filesystem
exit Exit from the EXEC
forceout Force Logout all the sessions of a specific system user
halt Shutdown the system
mkdir Create new directory
nslookup DNS lookup for an IP address or hostname
patch Install System or Application Patch
ping Ping a remote ip address
reload Reboot the system
restore Restore system
rmdir Remove existing directory
show Show running system information
ssh SSH to a remote ip address
tech TAC commands
telnet Telnet to a remote ip address
terminal Set terminal line parameters
traceroute Trace the route to a remote ip address
undebug Disable debugging functions (see also 'debug')
write Write running system information
Tarik Admani
*Please rate helpful posts* -
Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks. -
I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file
For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).
-
OPMN configuration assistant failed while applying patch on SOA 10.1.3.1
Hi All,
I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
The error msg i got is:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Output generated from configuration assistant "Run One-off OPatches":
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
OPatch returns with error code = 100
Configuration assistant "Run One-off OPatches" succeeded
Output generated from configuration assistant "OPMN Configuration Assistant":
opmnctl: starting opmn and all managed processes...
================================================================================
2 of 3 processes started.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1392512192,pid=4728)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can you please suggest a way out for this error .
Edited by: user10451494 on May 24, 2009 10:24 AMDid you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
Thanks
Shail -
1328 Error applying patch to [filename].
A file has changed or is missing. Uninstall and reinstall the program.
I have tried this solution twice and it did not resolve the issue.Anand8502
Hi,
I have tried all of your suggestions but I still have the issue with Error 1328 and the following message:
“Error applying patch to file D:\Config.Msi\PT78AF.tmp. It has probably been updated by other means and no longer can it be modified by this patch”. The Patch seems to update other files successfully, so is this an issue if this does not update this file and as previously stated I cannot find the file that it refers to on either drives (C:\ or D:\).
Cheers
Gary2105 -
How to find the patches for perticular concurrent program
HI
How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
Thank'sQuery the concurrent program in Sysadmin responsibility.
Note the concurrent executable.
Query the concurrent executable in Sysadmin.
Note the file name.
If it is a package, open the package in TOAD and note down the file name.
If it is a report/form, open it in form developer and note down the file name.
Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026 -
Applying patches to physical standby node(Data Guard 10.2.0.3)
Hello,
I have a data guard 10.2.0.3 environment (1 primary and 1 physical standby on a separate node) on solaris 10 and i want to document the procedure in applying patches to this environment.
I saw the article in Metalink Note 278641.1 which describes the procedure in applying a patchset to both nodes. It looks like both nodes need to be down before applying the oracle patchset.
Can we not apply the patches on only the standby while the primary stays up and running? My guess is you can't if the patches are significant i.e. it changes versions of the oracle binaries. But i want to confirm this.
Also, if we are applying solaris patches, i.e. nothing related to Oracle, we should be able to just apply them to the standby while keeping the primary up and running right?
The following has worked so far but i wanted to find some documentation that confirms it's ok.
1. shutdown oracle on standby node.
2. apply solaris patches...
3. restart oracle on standby node and put in managed recovery mode.
Any comments are appreciated.
Thanks.Hi
Did you get an answer for your question yet? I have the same problem with one of our databases. Would be very nice, if you could tell me.
Regards
Felix -
Error whlie applying Patch in EP
Dear all,
I downloaded .SAR file from service.sap.com for applying patch in EP
curr version : EP 6 SP15
to be updated to
EP 6 SP 21
now while i start SDM there it is asking to import .SDA file
when i select .SAR file i m gettin following error:
Summary:
======
There were 1 archives selected.
0 archives successfully loaded.
Loading of 1 archive failed.
Details:
======
1) Error loadking archive
... path of .SAR file......
(server side name is : .. path of .SAR file)
com.sap.sdm.util.sduread.IIIFormattedSduFileException: The Information about the deployment component found in the SDA ....path of .SAR file..... is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
Pl help.
Regards,
Purav
Edited by: Purav Mehta on Jan 17, 2008 4:25 PMHi Purav,
just find the sapinst files and execute it (but make sure that you have extracted only the relevant files!)
Start with the sapinst in the folder J2EE
J2EE:
J2EERT<SP>_<PL>.SAR
SAPINST<SP>_<PL>.SAR
CTRL<DB><SP>_<PL>.SAR
J2EERTOS<SP>_<PL>.SAR
Then continue with the one in portal:
Portal:
EP6CTRL<SP>_<PL>.SAR
EP6TOOLS<SP>_<PL>.SAR
EP6PORTAL<SP>_<PL>.SAR
SAPINST<SP>_<PL>.SAR
And after that is finished start the last sapinst:
CM+COLLABORATION
EP6KMC<SP>_<PL>.SAR
EP6CTRL<SP>_<PL>.SAR
EP6TOOLS<SP>_<PL>.SAR
SAPINST<SP>_<PL>.SAR
Regards,
Holger. -
I am trying to install the Oracle Metadata Repository 10.1.2.0.3 into a 10gR2 RAC database. Note 260554.1 gives some information on this. It also says:
3.1.18 Patch Required Prior to Running the Metadata Repository Creation Assistant on a 10.2 Real Application Cluster Database
You must install ARU patch 7993184 before running the Metadata Repository Creation Assistant on a 10.2 Real Application Cluster Database. If you do not apply the patch, you will receive an error message during Oracle Ultra Search configuration.
I cannot find this patch ANYWHERE. Can someone help? Thanks.Did you ever get an answer to where to find ARU Patch 7993184?
I am also trying to install the Metadata Repository into a Standard Edition RAC database.
Or did you find a way to make it work without the patch?
Thanks!
-Diane
Maybe you are looking for
-
Hello, I am getting the following error when I try to complete approval process. ORA-20001: Unable to create tablespace. ORA-01 119: error in creating database file '//./FLOW_1.dbf' ORA-27040: skgfrcre: creat e error, unable to create file OSD-04002:
-
How does Automator work?
how does Automator work? I'm trying to get an aplication to oporate , and Mac sends me here...But no support!
-
How do dynamic attributes work ?
A dynamic attribute can be assigned to a Identity Server configured role or organization. When the role is assigned to a user or a user is created in an organization, the dynamic attribute then becomes a characteristic of the user. For example, a rol
-
What's the advice regarding sending an I-Pod thru an Airport X-Ray Machine.....good/bad, does it matter or not, put it in a double layer film bag...turned on or off? Anyone have any experiance one way or the other?
-
How Synch iphoto events to iphone via itunes
How Synch iphoto events to iphone via itunes