Find out the peaks and check them against a value
Hi
I am currently aquiring a bunch of signals (4 to be exact) through a 6120 card. This works as expected.
Now I'd like to check all 4 signals if any value (up to 80 000 samples / waveform) has it's lowest level above -0,8 V and it's highest level below 0,8 V.
I tried this with the Express VI (Level and Amplitude Measurements). I check both for the peaks and if one of them (OR) is above/below that value, a Boolean value should change.
So I have my 1D - Waveform Array as Input to the Express VI. I then get the Positive/Negative Peak. I wire those to smaller/grater sign. and when I try to wire the two outputs of the smaller/greater signs to an "OR", LabView won't let me
It says: Source is Dynamic Data, Sink is Boolean.
What am I doing wrong ?
It would have worked, if you had converted the dynamic-data to a double before you pass it to the > / < operators.
If you pass two different data types to a function, the "lower" is converted to the higher (e.g.: sgl -> dbl) which is why the dynamic data is passed on to the or-operator.
Just see this example.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
CompareMaxMin.vi 169 KB
Similar Messages
-
I need help on purchasing a game I forgot my security question answers. and it's been awhile since I downloaded anything.. how do I find out the answers or change them without knowing the old answers??
Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID -
Can I find out the peak of Output 1-2 without having to play whole track?
Can I find out the peak of Output 1-2 without having to play whole track? I am preparing my album for mastering and I was told to have each track peak at no more than -2dB. Is there an offline peak detector or maybe another trick people use?
You should deliver your mixes to the mastering house in 24bit format. They should be converted to 16bit and dithered AFTER the mastering. Also, as long as the mixes are not overloaded, the levels could be handled in mastering also. That's what mastering is about, matching the perceived levels between the tracks. As far as your last question, "Do you just slap a multipressor on the output at that point and call it mastered?" the answer is heck no. I'd suggest selecting some professionally mastered cds in your genre, and put a few into your "mastering song" in logic and use them to compare to your mixes. Play with the mastering tools (multi compressor, EQ, adlimiter, etc) on your tracks and try to bring them into the ballpark with the reference songs. It will take a while to get a handle on it, but with practice, it will get you there.
-
How can i find out the resolution and accuracy of PXI-6602 module?
I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.
Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments -
To find out the min and max memory been used by each parameter under SGA_MA
Hi,
Can any please tell me how to find out the min and max memory been used by each parameter under SGA_MAX and SGA_TARGET ? below is the db CRMS65T. If any such script is there please provide me
SQL> select name from v$database;
NAME
CRMS65T
SQL> show parameter sga
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 1000M
sga_target big integer 1000MThanks in advanceCan any please tell me how to find out the min and max memory been used by each parameter under SGA_MAX and SGA_TARGET ? below is the db CRMS65T. If any such script is there please provide meI guess your question is, each memory components of SGA? if so
SQL> select * from v$sgainfo;
NAME BYTES RES
Fixed SGA Size 2088504 No
Redo Buffers 18882560 No
Buffer Cache Size 616562688 Yes
Shared Pool Size 301989888 Yes
Large Pool Size 4194304 Yes
Java Pool Size 4194304 Yes
Streams Pool Size 0 Yes
Granule Size 4194304 No
Maximum SGA Size 947912704 No
Startup overhead in Shared Pool 125829120 No
Free SGA Memory Available 0Also check
SQL> select COMPONENT,CURRENT_SIZE,MIN_SIZE,MAX_SIZE,USER_SPECIFIED_SIZE from v$sga_dynamic_components;
shared pool 301989888 301989888 0 209715200
large pool 4194304 4194304 0 4194304
java pool 4194304 4194304 0 4194304
streams pool 0 0 0 0
DEFAULT buffer cache 616562688 616562688 0 603979776
KEEP buffer cache 0 0 0 0
RECYCLE buffer cache 0 0 0 0
DEFAULT 2K buffer cache 0 0 0 0
DEFAULT 4K buffer cache 0 0 0 0
DEFAULT 8K buffer cache 0 0 0 0
DEFAULT 16K buffer cache 0 0 0 0
DEFAULT 32K buffer cache 0 0 0 0
ASM Buffer Cache 0 0 0 603979776
13 rows selected.
SQL>Edited by: CKPT on Sep 19, 2011 8:55 AM -
How to find out the plants and storage location for a given company code
hi
How to find out the plants and storage location for a given company codeHi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore -
Find out the peak position from graph
Hello All,,
Actually i want to run this algorithm real time,, to find out the peak position from graph ,, i need to generate the position automatically,,, firstly i try to use image processing by apply threshold followed by edge detection and the find out the center of each detected part. the drawpack of this procedure is that the obtained images are different and that lead to different threshold values,, so how can i directly find the position from the graph,,, here i attach the image and the graph of the image,,
thank you,,
Attachments:
11.png 15 KB
13.PNG 85 KBHello Klemen:
here i will explain in more details: the main objective of my work is to calculate velocity of small particle,, i perform my experiments by exposing the particle to 2 light pulses,, and i know the time between the two pulses,, so i need to know the distance to calculate the velocity,,, for that i apply correlation,,, the spot that appear in the correlation image is an indication of symmetry,,,so i should know the location of maximum intensity of each peak. The central peak (highest intensity) will be the reference (zero point) and the other peaks locations should be subtracted from the reference peak to determine the shift,,,
Here is the sequence of the process:
Acquiring raw image, correlation, position of central peak, shift calculation, velocity determination,,,,,
applying image processing is good idea in case of post processing condition,,, but in my case i need it real time, that mean if i need to apply image processing for calculation, i have to find out a universal criteria for threshold value that can be applied for all raw images,, from my experiments i didn't find specific criteria & i have to manually change the threshold value,,
If I choose the intensity (grey level) to be the criteria, then the small peaks (symmetry) will not take place,, because their intensity is very low compare to the central peak,,,
So the most reliable procedure is to directly find out the position of the two small peaks beside the central peak and save this values into an array and use it for calculation,,, I hope I am clearly explain my problem..
Thanks
Attachments:
7-2.png 36 KB
7-1.png 3 KB
7-700.PNG 123 KB -
HT1349 How can i find out the size and length of my playlist?
How can i find out the size and length of my playlist? Anybody?
It shows up in iTunes on your computer as seen here:
-
How do I find out the date and time a picture was taken on my Ipad?
How do I find out the date and time a picture was taken on my Ipad?
Photo Manager Pro
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/7a2b3650710f4bded81 ab75dda6a3ee5.jpg -
How to find out the IPS and DS Service Pack and patch levels in windows server.
Hi,
I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS in windows PRD system for this how could we find out the exact version of IPS & DS ( Service pack and patch levels ) and where we can find the same.
Many Thanks,
SudheerHi Sudheer,
On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
option 2:
Open CMC go to Settings. In the properties, you will find the Product Version.
Please check below SAP notes for more information.
http://service.sap.com/sap/support/notes/1602088
Regards,
Pavan -
How to find out the primary and failover DNS name
Hi;
This sounds very stupid, but could some one please tell me how to find out the name/dns name of the primary and failover server without using the CDS console.
any help is appreciatedIs this what you want?
$ /usr/lib/ldap/ldap_cachemgr -g
cachemgr configuration:
server debug level 0
server log file "/var/ldap/cachemgr.log"
number of calls to ldapcachemgr 12729
cachemgr cache data statistics:
Configuration refresh information:
Previous refresh time: 2005/08/07 23:54:59
Next refresh time: 2005/08/08 00:55:00
Server information:
Previous refresh time: 2005/08/14 15:15:00
Next refresh time: 2005/08/15 03:15:00
server: ldap1.example.com, status: UP
server: ldap2.example.com, status: UP
server: ldap3.example.com, status: UP
Cache data information:
Maximum cache entries: 256
Number of cache entries: 0
Gary -
How to find out the tablename and column name
Hi,
I have inserted a value (say 'I am here') in a table. but i don't know which is getting inserted this value.
Now i want to know which table and colums has this value (I am here). How to find out as without knowing the table name.
Is there any option to get the tablename and colum??.
Please help me.
thanks.Does nobody document their code anymore?
See my response Re: How to find out a tablename for one possible solution.
HTH
John -
I cannot update an App because I used an ID and password to purchase the APP that I no longer can retrieve. Is there anyway that I can find out that information ?
Try here > Associating and verifying email addresses with your Apple ID
And here > Is there a way to find my Apple ID Name if I can't remember it?
Frequently Asked Questions About Apple ID -
How to find out the object and tables that belong to it
Do you know how to find out which tables belong to which object in trans. BD66, I have a CABN table but i donot the object name so how i can find out that??
Hi,
Wht object u r taking about .if it's a transport object,
Go to Utilities -> Versions -> Version Mgt ->
The latest one which is active, is the one u have to transport .
Rgds ,
J
Do Award pts by cliking the left-hand side of this info. -
How do I find out the admin and password?
I need this ASAP so I can download some music onto my ipod touch. How are you supposed to know what the admin and password are?
the admin and password for what?
If for Apple ID see:
Frequently Asked Questions About Apple ID
If you forgot your screen-lock passcode
Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Error while running a job in Data services
We are using Data services BO XI R3 tool. We have created datastore for Oracle database 8i using Microsoft ODBC DSN. This is the source datastore. When job is to pull the data from source to 10g target, we get the below error in log file: 25219
-
I have been having numerous failures of DVI display adaptors with my MacBook Pro: OS 10.7.4, Late 2011 Model, Intel HD 3000 384 MB Graphics Card. The Mini-DVI Adaptor will work for about a week, then fail. This is the third unit that I have had to sw
-
Reading a Layer's content in a psd file
Hi, I hope somebody would have definitely come across this and could help me out!!!!!! Well I need to read layers(and their inside content!!) in a psd file. Basically the psd file is an interface with several buttons and icons. All I need is to get
-
Data changes in JTable cell.
Hi all, On editing a cell in a Jtable ,necessary changes must get enforced in the corresponding cells of the same JTable.For example,I have fields called Quantity ,SalePrice and TotalAmount in a Jtable,where the Quantity field is editable.When i edit
-
Hi Our application was developed using JDeveloper Build 1929 and Oracle 10g database. We have three schemas in our application and all these schemas share the same PS_TXN. My questions: 1. Should we truncate the PS_TXN table before deploying the code