How to find workcenter and production order change log

Hi,
I am new to PP function.
Due to problem tracking, I want to know where to find the change logs for
1.Work Center
2.Production Order
Many thanks!
Steven

Hello Steven,
to view change log for production order:
1. you can go to CO03 at the header functions choose GOTO --- CHANGE MANAGEMENT (here you can see if in the order there where Change process been done to the order)
2. Also in CO03 at the header functions choose HEADER --- STATUS CHANGES (with this you can track the user, system status changes, the action done, date, time, user,transaction happen on the production order.
to view change log for work center:
1. go to CR03 choose EXTRAS --- ADMINISTRATIVE DATA (here you can track the date and who made the changes ans status of the work center)
2. you can also check table CRHD which you can see detailed of the work center you wish to see.
Thanks

Similar Messages

Find Planned and Production Orders

Hi all ,
I have a requirement . If i give the Work center Name i should get already assigned Planned Orders or Open Production Order against that Work center .
Please let me know . If there is no standard FM then let me know can i retrieve those from any tables .
I appreciate for any suggestions .
Regards
Raj

Hello Raj
Please note that your "objective" (Find planned and Production Orders) has little to do with object orientation.
Function module BAPI_ALM_ORDEROPER_GET_LIST is probably the one you are looking for. You need to feed TABLES parameter IT_RANGES with the appropriate values.
Please note that the selection parameters have special names that can be found in the structures defined in fm IBAPI_ALM_ORDEROPER_GETLIST:
* set some local constants:
constants:
    lc_progname like rsvar-report value 'RIAFVC20',
    lc_par_int type ddobjname value 'IBAPI_ORDER_LISTOPER_PARAMS',
    lc_par_ext type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_PARAMS',
    lc_sel_int type ddobjname value 'IBAPI_ORDER_LISTOPER_SELOPS',
    lc_sel_ext type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_SELOPS'.
Example: If you want to select for a specific work center then I assume the selection parameter is:
(BAPI_ALM_ORDER_LISTOPER_SELOPS-) OPTIONS_FOR_WORK_CNTR
Thus, to select for a given work center add the following record to IT_RANGES:
FIELDNAME = 'OPTIONS_FOR_WORK_CNTR'   " presumably without the DDIC structure name
SIGN = 'I'
OPTION = 'EQ'
LOW = <work center>
If the selection does not work then just do a little debugging.
Regards
Uwe

How to Find Out The Production Order Number For The Sales Order Line Items

Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman

Production Orders Changes Log

Hello,
I would like to know if there is any Standard way in SAP to be able to see the modifications for a production order. I would like to see modifications in quantities or components.
Does anybody knows if it is possible to retrieve that information in a standard way?
Thanks

Dear
Changes in Production Order can be traced through following ways :
1.Order Change Management :
Frist a Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
Create a Change Number CC01 with Release Key
In Object Types select/tick "Actv", "object", "MgtRec",
You get the Change Number by Saving .
Use this Change Number to Change BOM or Routings
Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
Then go to Oder Change Process T Code :- COCM
Tick Change Number and Select the Change Number & Execute
Select the Production Order, click on Procurement element icon you get another screen select and execute again.
You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
you see the changes in BOM for Production Order i.e. after COCM.
Then Confirm the Changes in Production Order then New changes will be Active in production Order.
Use COCM1 to find out the details or CO03--Extra --change
Please check link : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
2.To get the changes in Production Order apply SAP Note 390635.
3 .You can use T.code AUT10 to check the changes made to production orders in specified period.
Regards
JH
Edited by: Jiaul Haque on Nov 28, 2010 2:11 PM

How to find required information in order to log on Business View Manager?

After Business Object Client installation successfully, I try to log on Business View Manager, but failed. One pop-up windows(Log on BusinessObjects Enterprise) come and let me put the information as below;
System:
User name:
Password:
Authentication:
Could anyone let me know how to find the above required information? Thanks!

You need to find this information from a person who installed server part of this deployment.
System: Name of the CMS server
User name: Administrator or other user name that exist in the Enterprise
Password: obviously...
Authentication: type of the authentication setup on the server side for the user you will be using.

How to find out the top ten Change log tables in BW

I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
Regards,
Prashant M J

Hi,
Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
If you wana see the requests in this change log use rstsodsrequest
and if you wana see the size in terms of kb, mb DB02 or st04
use the table name /bic* and click on tables and indexes option in history tab
DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
Thanks and regards
Kiran

AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

Hi Experts...
Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
Folks need your expert comments and valuable suggestions....
Thank You...
Lucky

Dear
You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
Refer : Re: Production order changes history
Production orders
Regards
JH

How to compare sale order bom and production order bom.

i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

Hi,
Check Tcode:CS14 to SD/PP BOM's
Chidambaram

How BOM and routing is selected for Planned order and Production order?

Hi,
Can any1 plz tell me how BOM and routing is selected for a planned order and production order. ?

Hello Mathisuthan,
BOM and Routing selection for the planned order and production order through production version, If u have more than one BOM and more than one Routing then u can maintain this information as Production Version in the system.
Production version you maintained
MM01/MM02 -- MRP4--- Production version
Or you can create Production Versions in Mass also with Transaction Code "C223"
In the case no production version maintained/created for the material, then system by default will pick the first BOM and routing.
I hope this information helpful to you.
Regards
Umesh Mali

So someone took my ipod 4g and who ever took it turned it off and i dont know how to find it and i really want it back, what should i do?

so someone took my ipod 4g and who ever took it turned it off and i dont know how to find it and i really want it back, what should i do?

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Production Order Changes...

I need the ability to identify changes made to a production order and the user that made the change. There are instances of incorrect changes being made to production orders with no way to identify the user that made the change. As examples, components are being 'final issued' but no one knows who set the 'final issue' indicator. Labor hours are changed with no traceability to the user who made the change.
SAP contains the capability to track changes to material master data, BOM data, and routing data. Is there the same capability for production order data?

Dear ,
You need to activate Order Change Managment-SPRO-Shop Floor Control -System Modification in case to trak production order change :
A.Enhancements for Order Maintenance
        1.Enhancement for the Display/Change of Order Header Data
        2.Check Changes to the Production Order Header
        3.Checks Changes to Order Operations
B.Enhancements for Order Change Management (OCM)
         1.Check Conflict for Change Step
         2.Definition of Comparison Fields for Order Comparison
C.Enhancements for Order Confirmation
Otherwise , from Basis side you can trak by
1.ST03
2.STAD-Provide SAP T-code , user id , Client .Here you can find out what are the changes user did for any production order based on SAP Trxn .
Regards
JH

Production order change status report

Dear All,
I created production order in PP. suppose I make changes in production order while confirmation i.e. i change prodn. order qty. 50 to 40 at stage 30(i.e. atrouting stage-- 3rd operation). From where i will get the status of this changes in production order qty ?
I tried in TC: COOIS , but it shows changed qty. 40. I want the diff. 50 -40 = 10 which i have cancelled whilw prodn.confimation.
Pl' reply....

we r using strategy '30'. we can not use make to order strategy as our planning has flexibility. So we r creating production orders manually@ 8000 materials from excel to SAP (using BDC program). So there is no linking with sales orders and production orders.
we r uploading material and qty. in mass to create prodn. orders manually.
while prodn. orders confirmation of new plan , sometimes to accomodate spill (pending orders--incomplete orders of last month) we have to cancel some new prodn. orders.
So how to cancel those and from which report i will get change qty. status?
thanks.

Send production order changes to external system IDOC

Hi,
I need to send production order changes to an an external system. I understand that I can trigger idocs using t-code POIT.
but my requirement is when a order is changed, i want to trigger an IDOC to external system with the new PO data...how can I achieve this

Hi Swathi,
A very high level idea.
You can use the user exit..."LXCO1U06" and call the transaction POIT in back goround and submit the idoc. This exit is used @ save of TA code CO02. Moreover as the production order can be changed through several transactions like COHV, CO40, COOIS etc....you have to check whether this exit would be applicable for all transaction.
Regards,
Chinna

How to find "menge" in "me21n" after change?

How to find "menge" in "me21n" after change?
The user create new order in me21n,
He insert new quantity ( for example 105 ) ,
And after it ( he change to ) 106 ,
i want to see those 106 parts in user exit MM06E005 (exit 6 , 7 , 8 )
But i see the old input of 105 parts and not the last input 106 parts ,
The structures of the exit not supplies this data ,
so , in which parameter/structure/memory I can find it ( in the exits ) ?

i am talking about creating order , new one ,
i insert the data and expect to see the data ,there is no order number or line and no database record .
the tables in the exit just keep the change befor
the last one .
for example , i put in the quantity 109 and now 110
i see the 109 , where i can see the last input ( 110 ) ?
thanks any way .

About production order change historic records

The users want to know about production order change historic records.how can I get it, please do me a favour. Thanks.

Hello ,
Look into:
SAP NOTE: 1407961 and
History of production order changes
Please search the forum first for such questions.
- Pushkar
Edited by: Pushkar Patil on Aug 6, 2010 9:56 AM

How to find workcenter and production order change log

Similar Messages

Maybe you are looking for