Finder window issues after ML upgrade

I have noticed a couple of funnies since upgrading to Mtn Lion from Snow Leopard, and wondered about them.
1.  No flippy triangles appear in the Finder List View for Applications or Documents.  They appear in sub-folders of these, and also Downloads, Home Folder, etc.
2.  If, in Applications or Documents, I press the right arrow key (which is the keyboard equivalent of pressing the flippy triangle if there were one), I get a new folder opening directly below with a name such as "Other" or "Name".  If I move to this new folder and press the arrow key again, the contents of the original folder are listed - all without any indentation - which is very confusing to read.  If I try to trash the new folder, I get an error messaage Error Code -5058.  If I close the Finder window and reopen it, the new folder and its sub-contents have disappeared and all is normal again.     Right Arrow key operation in other folder list views is OK.
3.  The "Date Added" for all of my Applications shows as the date and time I did the ML upgrade, not when the App was originally added.  Date Added fields in all other windows are blank.  I would expect all of these to respect the original dates.
And I am only up to page 50 of "The Missing Manual" . . . . . .
Has anybody else seen these or similar things, and would I expect to see them fixed in an up-issue?
Thanks.

I connected a external harddisk to my iMac and did a complete backup and it worked perfect. I tried my Timecapsule again, but the same problem again, so I deleted my Timecapsuledisk and did a new full backup, and now it works fine. Fseventd is now at a normal state too.
After this, I moved my Timecapsule to its usual place and connected my other external hardisk to it and made them both as Timemachine backupdisks. Timecapsule went fine, but the other harddisk started to do a full backup again, strange, and it takes about 17 hours to do it via WiFi. But I just let it work and see how it goes. Can anyone tell me why it does a full backup again just because I have connected it via Timecapsule?
Right now, my Finder works better, but I will wait until the full backup is finnished before I do some tests.
I have also made a verification and repair of both harddisks with Disktool, it reported a fault in my Timecapsule harddisk before I did the full backup..

Similar Messages

  • I m using window vista32 after itunes upgrade.. itunes crash .. Problem signature:

    i m using window vista32 after itunes upgrade.. itunes crash ..
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          11.1.4.62
      Application Timestamp:          52ddbf7a
      Fault Module Name:          ntdll.dll
      Fault Module Version:          6.0.6000.16386
      Fault Module Timestamp:          4549bdc9
      Exception Code:          c0000005
      Exception Offset:          00062086
      OS Version:          6.0.6000.2.0.0.768.3
      Locale ID:          16393
      Additional Information 1:          a183
      Additional Information 2:          96f68295953afa2675d1551e001cfa2f
      Additional Information 3:          5630
      Additional Information 4:          5482da5e28e2dc79b1d40bd90d8c9b

    Hello there, jasibrar.
    The following Knowledge Base article offers up some great steps for troubleshooting your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    This additional article may prove useful to you as well:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
    The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
    Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
    Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
    Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
    If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
    Thanks,
    eidnolb

  • Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits.  After several attempts at this, LR6 won't even launch properly...shows the splash screen but

    Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits.  After several attempts at this, LR6 won't even launch properly...shows the splash screen but that's it.  The program is buggy...need an update/revision quickly!!

    If you're on Windows, check out a free program called Audacity--it's fantastic.  With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • NSS Issues After Win10 Upgrade

    I have had many of the same issues with the Comcast/Norton Security Suite that have been ID'd in the forum, but have not had a positive resolution. I have tried the downloads numerous times and the installation has failed repeatedly. I have followed the instructions suggested in the threads from "Tazman817" and "USAF", but with no luck. My screen shots are identical to Tazman's, and I have tried both the Norton Power Erase and Norton Removal Tools. I have downloaded the new install from www.norton.com.nss after deleting the Norton folders in Program files. Still no luck. I want to continue to use the Norton product, but after several hours of frustration, I am running out of patience. Are there any other's having these same issues? Are there any other potential solutions? Thank you.

    Thanks for the tip, but my experience with Norton was not as successful as yours. I consulted with two techs over four hours (including phone wait time), and they used remote access to delve into the finer points of my system. They used Norton Power Eraser and Norton uninstaller, deleted Norton Program files, and even went into the Registry to make changes. Other than making registry changes, I had used the other tools prior to calling the support line. Based on the Norton Techs conclusions so far, Norton Security Suite cannot be installed on my system after the upgrade to Win 10. I am waiting a few days to find out if they can develop a fix in the future. Until then, I will be using Windows Defender and Firewall, and exploring other options. Too bad, I have liked using Norton's products.

  • IPhone syncing issues after iTunes upgrade

    Hi
    I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
    I tried authorizing the computer but I just get "This computer is already authorized".
    there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
    I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
    Would re-installing iTunes help?
    Any ideas?
    Thanks
    Chris

    Hi Chris,
    Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
    If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
    If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
    -Jason

  • Issue after solman Upgrade

    Dears,
    We were using solman 7.0, connected to ECC 5.0 server.
    We configured all activities EWA,System Monitoring and all were working fine.
    Now we upgraded solman to 7.01(EHP1) and R/3 to ECC 6.04 .
    1 - My first concern is after upgradation it should automatically pick details but is is still showing ECC5 in product version.
         We performed Read data from remote system also but still same issue.
    2 - When I go to EWA or system Monitoring I only find Prd server there while in solution's logical component all dev,qas and prd servers are available.Earlier before upgrading it was showing all systems in EWA and system Monitoring.
    Please suggest.
    Shivam

    Hello Shivam
    For point #2 please look closely at the solution containing the systsem and make sure that 1) The Dev, QAS systems are included, and are highlighted greeen ( Meaning they are status "Put in Solution"). It sounds a lot like this setting is not done, therefore the systems would not show when you would try and use that solution in functions like EWA, BPMON, etc.
    It sounds very much like when you create a new soltuion with PRD, QAS, DEV systems assigned, but only the PRD system is "Put in Solution" by default, so you explicitly need to right click the system in change/edit mode, and select "Put in Solution", then save.
    Now why this might be the case after the upgrade, I don't have an answer, but it is worth having a check as the symptom fits this issue. I would advise you check the solution itself and ensure the DEV and QAS systems and in status "Put in Solution".
    Hope this information is helpful.
    Regards,,
    Paul

  • SAP Query selection screen issues after ECC upgrade

    Hi all
    We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
    All the fields required are available.
    However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
    Can anyone help identify the issue so that the issue can be resolved?
    Thanks
    Vinodh S

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • Performance issue after PT Upgrade.

    Hakan and Team ,
    We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
    After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
    can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
    Deatils :-
    SQL SERVER 2005
    Windows 2008 R2

    Hi,
    Performance is always a difficult one to tackle.
    It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
    At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
    http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
    See if you can apply some of the keypoints from his presentation.
    Regards,
    Hakan

  • Permissions issue after Mavericks upgrade

    I have just updated an early 2008 IMac with OSX Mavericks.
    All software running fine, but I noticed occassionally I was getting an authentication prompt on some files, didn't follow, but simply authenticated as and when I need to, I assumed it was when I moved files from my Mac Pro to my Imac.
    Having run the upgrade however, I get an error message to contact the vendor (Battlefront) as my copy of Combat Mission Battle for Normandy has lost its license.
    After the upgrade I had also purchased from the same vendor Combat Mission Fortress Italy. Having downloaded this and gone to run after copying to applications, this software gives me an error message saying unknown developer so I have got no where near installing a license.
    Having contacted the vendor and tried to get a work around, I am now getting the message it is you Mac not our software, despite the fact that all my other software is working fine (and the fact that the Combat Mission Battle for Normandy game worked fine until the upgrade).
    I do feel some sympathy for them, I do think the Mac has some sort of permission issue - I also probably compounded this by deleting a user which I did not recognise called 'wheel' which I suspect now is some form of default permisison.
    Anyone got any ideas, how do I 'reset' the system - I have tried fixing the permissions through disk utility.
    My vendor got me to run a sudo command through Terminal, but I got the message...
    sudo: unable to stat /etc/sudoers: Permission denied
    sudo: no valid sudoers sources found, quitting

    Update Saturday Jan 4, 2014
    Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
    I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

  • Unable to Open Public folders from Windows XP after the upgrade of CU4 to Cu7

    We still have few machines running windows Xp, who cannot access Public folders after the upgrade to the latest CU7. Is there any fix for it other than moving them to Windows 7?

    Hi DNair,
    Hope you are already upto date. But still just putting it through to cross check.
    Outlook Versions Supported by Exchange 2013
    The following Outlook client versions are fully supported by Exchange server 2013. Please bear in mind there’s a difference between what is supported and what might be compatible with Exchange 2013.All
    of the Outlook versions listed below have been thoroughly tested by the Exchange Product group:
    Outlook 2013
    Outlook 2010 SP1 with November 2012 Cumulative Update ( available from
    http://support.microsoft.com/kb/2687623 )
    Outlook 2007 SP3 with November 2012 Cumulative Update ( available from
    http://support.microsoft.com/kb/2687404 )
    Entourage 2008 for Mac, Web Services Edition
    Outlook for Mac 2011
    Outlook clients earlier than Outlook 2007 are not supported.
    Find and Manage
    Outlook Updates here.
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • I DVD Soft Frame template issue after Lion upgrade.

    Hello, I've just updated my os to Lion but the Soft Frame template in iDVD, (7.1.2) is no longer working correctly. The light coloured background which covers the right hand side of the frame is missing and has been replaced with black. This issue effects sub menus as well. Existiting and new projects using Soft Frame suffer from this problem... Any ideas would be gratefully received! I have tried re installing iDVD but this had no effect.

    OK I fixed it, sort of. The .tif file which provides the background image had disappeared. Even deleting IDVD and its themes and re-installing didn't work. So here's what I did:
    1) Make a new background. This can be any graduated colour field which you can make on any paint programme such as GIMP. However I grabbed the background from the `Forever' theme which is beige and adjusted the hue to turn it from brown to the blue which was close to the old 'Soft Frame' backing.
    Here's how to find the 'Forever' background:
    Go to your hard disk and look for Library/Application Support/iDVD/Themes/iDVD7/Forever-Main.theme
    CTRL click on it and select `Show Package Contents'
    Expand the contents folder and then the resources folder and look for the .tif file marked Forever-Background.tif
    Drag this into your photo editing programme and change the colour to what you want.
    Save the new file as tpt.tif on your desktop (there is a reason for this filename)
    2) Replace the defective backgounds in the `Soft Frame' themes
    Go to your hard disk and look for Library/Application Support/iDVD/Themes/iDVD7/Softframe-Chapters.theme
    CTRL click on it and select `Show Package Contents'
    Expand the contents folder then the resources folder and look for the file marked tpt.tif and delete it
    Drag the tpt.tif file you saved to your desktop into the Resources folder
    Now do the same thing in Library/Application Support/iDVD/Themes/iDVD7/Softframe-Extras.theme
    And do the same thing in Library/Application Support/iDVD/Themes/iDVD7/Softframe-Main.theme
    Next time you launch iDVD it will pick up the new backgrounds.
    It took me about 10 minutes.
    Now I've found where the backgrounds are stored (if you select Project...project info in the iDVD menu the media pane lists the full path) I realise it is easy to put your own backgrounds into any of the existing projects.
    I hope this helps.
    iDVD background missing after Lion upgrade 

  • IPad2 charging issues after iOS7 upgrade

    I recently upgraded iOS7 in my iPad 2, after the upgrade I find that the charging time has increased greatly!  Not sure if this was due to using the iPad while charging. Yesterday left iPad2 for charging all through the night and more (12-14 hrs) only to find this has charged only 3%. The charging issues seems to have degraded over time. I had atleast charged fully (100%) once after iOS7 upgrade-which also took a lot time than iOS6.
    All the charging I did was over wall Unit, with original chargers. I see from forums that this seems to be experienced by few more users. Anyone found any solution to this problem?
    I have tried resetting, switching off the iPad 2 while charging with no success. I'm now regretting having upgraded to iOS7- which I liked. This is not what I expected from Apple.

    I also have a Mac Air 2012, tried charging from Mac Air and it's now charging! Mac Air is now charging from the same wall unit location which I used for iPad 2 - so nothing wrong with the wall unit. 
    I just wish i could charge as fast from wall unit as with iOS 6.  Any further guidance is greatly appreciated.

Maybe you are looking for