Finding nodes in an environment

Hi all,
Do any of you know how to find all the nodes defined in an environment using
systemagents in a Forte application?
The SubAgents attributes in the SystemAgent class only returns nodes that
are model nodes or non model nodes that have active nodemanager. As soon as
a node is not a model node and it isn't active, I can't seem to find a way
to get that any info about that node, not event a hint that it may be
defined in the environment.
Thanks Ulrich
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

One method would to find the peaks of T wave, QRS and P wave.
Then probably, you can index out the relevent section of the waveform that will comprise your T and P wave
Look at an example vi I have attached
Attachments:
DETECT_PEAKS.vi ‏27 KB

Similar Messages

Eclipse give following error :could not find Java 2 runtime environment

When I try to start eclipse it is giving me following error could not find Java 2 runtime environment.It was working fine untill I installed a new verson of eclipse although I am not whethar that is the source of problem.
When i give java -version command in command prompt it shows
Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
has value '1.4', but '1.6' is required.
Error: could not find java.dll
Error: could not find Java 2 Runtime Environment.
My java Home ,classpath , and path are all set as I say it was earliar woking fine.
Please Help.

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Error:could not find Java 2 Runtime Environment

Greetings,i have a java problem with a game(football manager 2008) installation.I have a hp laptop with windows vista installed and when the installation is on 100%.It appears Error:could not find Java 2 Runtime Environment.I have taken some screenshots to help you understand my problem.
intallation:
http://img218.imageshack.us/img218/7945/egkatastashba2.jpg
the error:
http://img232.imageshack.us/img232/6388/errorty5.jpg
Also i tried to join a site which java is required and it appeard the following errors:
http://img87.imageshack.us/img87/6465/sfalmasp6.jpg
http://img87.imageshack.us/img87/9337/sfalma2sj1.jpg
PS:I have installed the java(Java(TM)6 Update 5).I hope to receive a reply with the solution of the problem as soon as possible.Thank you
Edited by: Cap.George on Mar 7, 2008 8:46 AM
Edited by: Cap.George on Mar 7, 2008 8:47 AM

Consider going to a Windows forum
(or better yet, to Microsoft's web site or to a local book store)
and learning about Vista's "User Account Control".
At least do a Google search on it.

"Unable to find node..." error

Does anyone have any idea what the error below is trying to tell me???
I'm getting these every time I try to sync this same package file called "personal notebook.ntx".
1) When I look inside the package file there is no such file. There is a file called "req_of.gif", but no file with a "._" preceeding. On top of that this is a standard AFP based home directory (not CIFS, or NFS).
2) Every time the sync runs, the file that gets the error CHANGES! So one time it'll be the file I just mentioned, the next time it'll be this file:
"Documents/NoteTaker-NoteShare/Personal/personal notebook.ntx/Attachments/._s117018.jpg"
The next time I'll be this file:
"Documents/NoteTaker-NoteShare/Personal/personal notebook.ntx/Attachments/.smlogo2.gif"
And so on. There are about 84 files in that directory and if the automatic syncs are let run enough times, it will eventually generate an error on most of the files in that directory (but not all
1:: <GO> local: PACKAGE MODIFY "Documents/NoteTaker-NoteShare/Personal/personal notebook.ntx" {(Priority=1, EXECUTING)}
1:: <OK> local: CHILD UNCHANGED ./.DS_Store
1:: <OK> local: CHILD UNCHANGED ./AppletData
0:: \[2007/12/15 08:52:07.288] EXCEPTION: -\[SStore myNodeForNode:isDestNode:]: Unable to find node for "Documents/NoteTaker-NoteShare/Personal/personal notebook.ntx/Attachments/.reqof.gif" in store "HomeSync_Mirror-L-yvUOtsqmAt7-ramos-m" <-\[SStore myNodeForNode:isDestNode:] (Store.m:840): "'(node)' is nil">
0:: \[2007/12/15 08:52:07.288] BACKTRACE: {
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x4a1eb
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x90340
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x904c2
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x53d76
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x4804f
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x47ace
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x53929
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x3132e
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x30c65
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x47a6a
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x478d6
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x155d3
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x9001704d
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x90016bf4
0:: \[2007/12/15 08:52:07.288] ??| |?| 0x92d0a075
0:: \[2007/12/15 08:52:07.288] }
0:: \[2007/12/15 08:52:07.288] <ERROR> local: CHILD UNCHANGED ./Attachments (-\[SStore myNodeForNode:isDestNode:] (Store.m:840): "'(node)' is nil")
0:: \[2007/12/15 08:52:07.290] <ERROR> local: PACKAGE MODIFY "Documents/NoteTaker-NoteShare/Personal/personal notebook.ntx" {(Priority=1, EXECUTING)} (-\[SStore myNodeForNode:isDestNode:] (Store.m:840): "'(node)' is nil")

Hmmm, Ok, this is helpful, however we're now in an area I'm rather unfamiliar with so need some more help (thanks for this by the way).
First what I know...
* Everything below the directory "personal notebook.ntx" is part of a package and not directly under my control but under control of an application called Notetaker. I have however, been having to look into the packages a lot recently due to the fact that the modification dates don't seem to work the same in Leopard as they did in Tiger (I mentioned this in another thread, but no one seem to have any insight on it http://discussions.apple.com/thread.jspa?threadID=1244035&tstart=0). By looking into the package seemed to be the only way to be able to verify whether or not my files were being sync'ed correctly as I could no longer rely on modification dates.
* Checking the rest of the files in the package shows that a lot but not all of the files have that attribute set. All the files in that directory have that attribute set.
* I don't consistently get the same file to error out every time. If I run the sync two times in a row with no changes what-so-ever a different file will generate the error.
So questions that come to mind since I haven't dealt with extended attributes very much....
* Are you saying that the extended attributes could only have been set by a Leopard client? A Tiger client would not have been able to set them? (I'm syncing these files between Leopard and Tiger clients).
* what is the "com.apple.FinderInfo" attribute? Can I delete it? What would I lose? The fact that not all files in the package have this makes me wonder whether or not it's necessary.
* why would FileSyncAgent have a problem with extended attributes?
Thanks for any help.
-Rich

Didn't find content for activating environment

hi gurus,
i am activating the environment using the standard program UJS_ACTIVATE_CONTENT, i am inputing the required fields and executing the screen,
but the output screen showing the message in message text tab i.e Didn't find content for activating environment in with error message.
Please suggest me to resolve the issue

Hi jose,
Sorry for late replay,
i done the process as following steps.
1step: go the t-code : UJS_ACTIVATE_CONTENT .
check out the error message , if activation error message there...
do the following steps>
Go to t-code RSA1.
Click on bi content -----> click on Object Types > click on More types
---->Select BPC deletion----> select objects
I done above steps to resolve the issue .
Regards.
surya

Finding node failed in IDM console

Hi ,
When we do a Find in Identity store with "Find tasks or jobs only" checked , getting this error "Finding node failed , Error: Dh , Description :Type mismatch " , This used to work normally before.
Please advise.
Version :7.2 ,SP8 P3
Thanks

Hi Per,
We have DB2 database .
However I observed that this happens ,when I try to search the task id of the ordered/unordered group . The search opens any other job whose jobid matches with the taskid (of the ord/unord group )in the search field. Else I get the error mentioned.
On the other hand , as you have quoted , when I try to search the same ordered/unordered group with the task name,it gives the right result.
Thanks
Sri

JDK7 INSTALLATION FAILS WITH ERROR CANNOT FIND REQUIRED JAVA RUNTIME ENVIRONMENT

Hi
I am trying to install jdk7 on windows7 through command line with command java_ee_sdk-6u4-jdk7-windows-x64 -j "C:\Program Files\Java\jre7\bin". But it fails with error cannot find required java runtime environment in C:\Program Files\Java\jre7\bin. I have set the java_home and path environment variables to above path. Also I tried instaling through installer but it gave same error with null in path. Can anyone help?

Hi
I am trying to install jdk7 on windows7 through command line with command java_ee_sdk-6u4-jdk7-windows-x64 -j "C:\Program Files\Java\jre7\bin". But it fails with error cannot find required java runtime environment in C:\Program Files\Java\jre7\bin. I have set the java_home and path environment variables to above path. Also I tried instaling through installer but it gave same error with null in path. Can anyone help?

Scripting Agent - Cannot find node xml

Hi all,
I am just learning about Scripting Agent, and in doing so I am having some difficulties.
Basically I want to set the default work hours for all new users to be different than microsoft default, and I think I have the scripting right, but the problem is that I cannot get any command to run at all when the Scripting Agent is enabled. Even
if the command is not one that is listed in the xml.
I get the following error (note that this is not even the command listed below in the xml, but it does the same for any "set" or "enable" type cmdlet):
[PS] C:\Windows\system32>Set-MailboxCalendarConfiguration nicholasa
Provisioning layer initialization failed: '"Scripting Agent initialization failed: "Invalid configuration file C:\Program Files\Microsoft\Exchange Server\V14\Bin\CmdletExtensionAgents\ScriptingAgentConfig.xml: cannot find node xml.""'
    + CategoryInfo          : NotSpecified: (:) [], ProvisioningBrokerException
    + FullyQualifiedErrorId : C136A4D5
My xml is below. I have tried a bunch of other sample ones from online, and they all do the same, even when the cmdlet is not the one specified in the xml.:
<?xml version="1.0" encoding="utf-8" ?>
<Configuration version="1.0">
<Feature Name="MailboxProvisioning" Cmdlets="Enable-Mailbox">
<ApiCall Name="OnComplete">
if($succeeded) {
$mailbox = $provisioningHandler.UserSpecifiedParameters["Identity"]
Set-MailboxCalendarConfiguration -identity $mailbox -WorkingHoursStartTime 09:00 -WorkingHoursEndTime 16:30
</ApiCall>
</Feature>
</Configuration>

So - I just took your code into my lab SP2 Ru3
I changed to New-Mailbox as I'm not enabling existing accounts,   you can add another section.
When I changed to the Name parameter this works.
<?xml version="1.0" encoding="utf-8" ?>
<Configuration version="1.0">
<Feature Name="MailboxProvisioning" Cmdlets="New-Mailbox">
<ApiCall Name="OnComplete">
if($succeeded) {
$mailbox = $provisioningHandler.UserSpecifiedParameters["Name"]
Set-MailboxCalendarConfiguration -identity $mailbox -WorkingHoursStartTime 09:00 -WorkingHoursEndTime 16:30
</ApiCall>
</Feature>
</Configuration>
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Help needed with finding node in JTree

Hi,
In my application i will be entering some string data in a text box for search criteria.
When I click on search, I will get data from database which will be shown as a JTree.
This Jtree will have some nodes in which, node with string entered in the search text box exists.
I need to focus on this node and I have only a string to find this node.
How can I do this?How can I find a node in JTree using string value?
Is there any alternate option by which I can achive my need?
Please suggest.
Thanks.

@OP: please assign your dukes.
@Andre_Uhres: if you don't get rewarded in the next couple of days, please let me know here to get at least one duke for your effort.
Bye.

Find nodes in a cluster

How to find all the nodes in a cluster.
olsnodes -n gives the the info of nodes which are up . If any of the nodes is down it will not show.Is there any command or file from which i can check all nodes of a cluster even if it is down.

In 11.2.0.3 i use:
crsctl stat res -tHope it helps.

EM (management server) doesn't find node

i created a new database.
when i start EM(management server) and search for new nodes it doesn't find the db.
when i start EM standalone i can easy add this DB to the tree.
can i add the DB manually when connected to management server?
i set the global db-name to the same as the sid. could this be the problem? i didnt specify the global db-name like this: sid.domain.yy.
thanks a lot

You need to Discover the nodes from navigator menu...or by pressing ctrl + D
Make sure Oracle intelligence service is running on Nodes which you want to discover.
like for Oracle 9i
Oracle9iAgent

How to find the previous path environment variable in windows 2008

I am reconfiguring the Hyperion 11.1.2, and later, I installed the ODI. And them when I come back to reconfigure the Hyperion, it cannot be reconfigured, and say cannot find the path parameter. And I check the PATH environment variable, and find it is showing a dumy value, do we have a way to recover the previous PATH envirnment variable?

To get the source IP address, you will need to enable File Share auditing: http://technet.microsoft.com/en-us/library/dd772690%28v=ws.10%29.aspx
Otherwise, you can simply disconnect the user session.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Finding a Logic 7 Environment to control my MicroQ

Hi people, this is my first post in apple discussions forums.
I need an environment that contains all necessary to control the waldorf microq (like sounddiver style)... I found a perfect Logic4 one but is not compatible with L7 and is also protected (so I cannot unpack macro to get them in L7)
Think a Logic6 compatible one could be good as well. Were could I find something?
Thanks!
g

Thank you. That's something, even though the option is only there in Logic 8. Also, say that I wanted to use the BCF2000 to control Totalmix and my Logic Control for Logic. How do I get to bypass only the BCF? It must be quite a common scenario, so there must be a way.

JTreeTable - finding node's row

Hi
I am using sun tree table.
I would like to find the row of a specific node in a tree table - this should be the opsite of
treeTableModelAdapter.nodeForRow();
I tried this function but it doesnt work good since there is no correlation beween the location in the tree regarding the root and the location at the table.....does anyone knows how do i find the relathionship between these two?
protected int getNodeRow(TreeTableNode node) {
      TreePath treePath = node.getPathToRoot();
        if(treePath!=null){
        return treePath.getPathCount();
       return -1;
   }thanks,
Liat

With a little help of my friends i found the solution:
i did it by looking up the paths for the selected rows and after redrawing the table, looking up the rows for the paths again.
here is the needed code in "TreeTableModelAdaptor". Replace everything between 'delayFireTableDataChanged' and 'updateTreeTable' with this code.
=====
protected void delayedFireTableDataChanged() {
delayedFireTableDataChanged(new TreePath[] {}); }
* Invokes fireTableDataChanged after all the pending events have been
* processed. SwingUtilities.invokeLater is used to handle this.
protected void delayedFireTableDataChanged(TreePath[] selected) {
SwingUtilities.invokeLater(new DelayChange(selected)); }
private class DelayChange implements Runnable {
private TreePath[] selected;
public DelayChange(TreePath[] selected) {
this.selected = selected;
/* (non-Javadoc)
* @see java.lang.Runnable#run()
public void run() {
fireTableDataChanged();
if(selected!= null && selected.length > 0) {
for(int i=0;i<selected.length;i++) {
int row = tree.getRowForPath(selected);
treeTable.getSelectionModel().addSelectionInterval(row,row);
public void updateTreeTable() {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
Vector pathState = getExpandedPaths();
int selectedRowNums[] = treeTable.getSelectedRows();
TreePath selectedPaths[] = new TreePath[selectedRowNums.length];
for(int i=0;i<selectedRowNums.length;i++) {
selectedPaths[i] = tree.getPathForRow(selectedRowNums[i]);
treeTableModel.fireTreeStructureChanged(this, ((TreeTableNode) treeTableModel.getRoot()).getPath(), null, null);
restoreExpandedPaths(pathState);
treeTable.getTableHeader().repaint();
delayedFireTableDataChanged(selectedPaths);

Search query not able to find node under a specific site structure (eg. 2013/05)?

Hi,
    We are saving our data on a node under year/month site structure, eg. (2013/05/node1) but when we search for the data using a query in a custom workflow., it does not fetch any results.The query being fired is something like :
   SELECT * FROM [nt:base] AS s WHERE ISDESCENDANTNODE([/content/hm/NewsroomSection/en/NewsRoom/NewsroomDetails/2013/05/node1]) .
   On trying to run this query directly in crxde, it shows no result. But when we change the site structure to 2013/5/node1, it is able to fetch results.
   I am not sure if the problem is because of the '0' digit in the month in site structure (2013/05).
   Please provide your input if any of you have come across something like this before ..
Thanks
Abhishek

Hi Abhishek,
In case of nodes with numbers, any node starting with 0, this 0 gets omitted in the search query.
So, if your node name is like 02013 for year, when it searches it omits 0 and searches for 2013.
In case you want to search for your node, your SQL2 query should be like below:
SELECT * FROM [nt:base] AS s WHERE ISDESCENDANTNODE(['/content/mysite/en/products/2013/05'])
See screenshot for reference. This should return you the results.
Hope this helps.
I guess for more reference on SQL2 queries, you can refer to JCR 2.0 spec.
http://www.day.com/specs/jcr/2.0/6_Query.html
Also, you might want to look at the railroad diagrams and some examples from Jackrabbit's test cases:
http://www.h2database.com/jcr/grammar.html
http://svn.apache.org/viewvc/jackrabbit/trunk/jackrabbit-spi-commons/src/test/resources/or g/apache/jackrabbit/spi/commons/query/sql2/test.sql2.txt?view=markup
Hope this helps.

Finding nodes in an environment

Similar Messages

Maybe you are looking for