Fingerprint Manager's "reveal password" shows wrong password.

Title says it all, has anyone had this problem?
I had set up this Fingerprint Manager Pro first day i received my laptop.  Now its been 2-3months and forgot my password.  When pressing the "reveal password" option in the program and after the program has recognized my fingerprint to be mine - it shows a wrong password.  when typing it in  windows says its wrong.....??  help?
Solved!
Go to Solution.

Enable the Admin account just in case you lock yourself out:
From an elevated command prompt:
net user Administrator /active:yes
Start > Run > control userpasswords2
Reset the password on your account, and see if you can change it.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

  • CCS Password Manager and Fingerprint Manager compatibility problems

    Hello All, I have a Thinkpad E550, bought by the end of last year, and it came with Fingerprint Manager 4.5. I also wanted to use a Password Manager, so I downloaded the CSS version 8.3. Both are working, but they can't see each other. Anyone can help me with that? Best Regards,

    Hello mate,
    Open Client Security Solution. on the top left corner you can see a button Advanced click on it and then Reset security settings.
    See how it goes.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Can't login, shows wrong password.

    hello everyone,
    I'm using my skype account many years, and 30 minutes ago my skype closes and i was try to login again, but it shows wrong password, than i was going to reset new password, but mistake.. there was message something about .. i need to contact with skype support... i realy need my skype account back, beacuse i have many business people there and do this without reason i think its not the best skype idea.
    What i must do to get back my skype account...?
    Thank you!

    Greetings,
    Password-related matters must be resolved by Skype Customer Service; we here in the Community are not authorized to access Skype accountholder data.  Although it may seem silly to do so, if you are locked out of your account, you will need to create a new account in order to contact Skype Customer Service.
    Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the webform and click Submit, your information is relayed to Skype and you will receive a reply via e-mail.
    If you are a Skype Premium or other eligible customer, you will be routed to start an instant message chat session with a Customer Service agent.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Outlook add in keeps showing wrong password

    Outlook 2013 will not synch my calendar or contacts after the initial set up.  I have removed and reinstalled the iCloud control panel several times.  When I reinstall it, it synchs my contacts and calendar in the initial set up.  But after that the add in shows "wrong password" and will not synch any changes.  I have removed the iCloud control panel and removed all of the files.  The initial set up runs fine.  Then "wrong password"!

    Hi,
    Does the issue happen to all incoming messages or some specific messages? Please confirm if the issue can be reproduced.
    Make sure time zone settings, Date and Time settings are configured correctly in Outlook 2013, local computer machine and Exchange server using. We can open the problematic message, click File > Properties to check time in the message header. Please close
    Outlook and receive a test messages in OWA to check whether the time is shown wrong or not.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Changed apple password but in iphone still it shows wrong

    i wants to erase data on my Iphone, but as i press the Erase all content in iphone for resetting, shows wrong password popup.
    i already changed my password several times but i don know why in Iphone the new password is not valid.
    i need your support .

    Just to confirm is it asking for passcode or Apple ID password?
    If it is asking for the Apple ID password then you have Find My iPhone enabled in Settings>iCloud. Make sure the Apple ID is correct in Settings>iCloud and that you are providing the correct password for that Apple ID.

  • Workgroup Manager loses all passwords when the Xserver is rebooted

    Hi all.. I'm a newbie with Mac server, an MCSE and former Network Adminstrator of an all Windows domain, now in a mixed environment and responsible for the Mac server/clients as well as the Windows server/clients.
    In January we attempted a migration from Panther server to Tiger/Xserve, on a brand new server. It appeared to have worked, and users were able to log in successfully after being created in Workgroup Manager, and given passwords.
    Our problem is huge!! We cannot reboot this server!! Therefore, we cannot do upgrades, for just one problem. What happens when we reboot is that ALL passworeds in Workgroup Manager have to be entered again!
    Any help will be gratefully appreciated!
    High School XServe Administrator

    Tony,
    I wish to thank you for the helpful comments/suggestions to download the article at:
    http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c3gs4.html
    It was an excellent quick guide that I followed to the letter, and then I called Apple Support and was able to further troubleshoot our server/client connection issues. When I left at the end of the day, the server is in great shape, although we still have some connection issues and tomorrow one of our Mac teachers who used to manage our Mac server will show me how to re-create the shared folders/shares and then add the users to the shares.
    The good news is that the users are now semi-connecting, with the peppermint-stick progress indicator, but then a failure message that refers to the shares.
    Your link to the article was a terrific start for me, and the Apple technician was most impressed that I had already covered all of the suggestions in that article when we spoke.
    Thanks... one more post after a complete success, hopefully tomorrow... which I will probably spend re-creating all users and shares..
    High School XServe Admin

  • I forgot the answers for the security questions and when I try to change them (My Apple ID - Manage your account - Password and Security) I'm asked to answer the exact questions I'm Trying to change because I don't remember the answers. How can I do it?

    I forgot the answers for the security questions and when I try to change them (My Apple ID -> Manage your account -> Password and Security) I'm asked to answer the exact questions I'm trying to change because I don't remember the answers. How can I do it?

    Can't you try the email option instead?

  • VM2.2 manager page shows wrong status "Shutting down" for VM Guest

    Hi,
    VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
    It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
    Any information on How to correct the status in VM manager page?
    Thank you.

    I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
    To solve this problem, change the status manually as follows:
    1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
    2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
    3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
    4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
    export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
    export ORACLE_SID=XE
    $ORACLE_HOME/bin/sqlplus / as sysdba
    SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
    SQL> commit;
    SQL> quit
    vm_name refers to the virtual machine name.
    5.Retry your operation, or delete the virtual machine directly.

  • Workgroup Manager: Adv, User Password Type grayed out (was Shadow Password)

    I've set Workgroup Manager, Advanced, User Password Type: Shadow Password, Options to inactive after 90 days, fail after 5 attempts, allow user to change password, at least 8 characters every 90 days. Today after user logged in to the console, the user locked herself out remotely via sftp, ssh, & xterm from a WinXP PC running ReflectionX.
    I went to the console, used Fast User Switching to bring up my admin account (her account was still logged in), we reset the password with Workgroup Manager so the red X is no longer on her username.
    However, the Advanced User Password Type: drop down list is blank and grayed out and she can't log in? How do I reset this? The user has a lot of files, I'm afraid to delete and recreate the user account. That seems pretty drastic for an invalid password attempt. I've rebooted and ran Apple Updates for good measure. Any ideas how to put Shadow Password back in that box?

    To unlock the user's account, after backing everything up and noting the user's uid, home dir, groups, etc, we deleted the user in WorkGroup Manager and readded her putting the user id, home dir, etc back the way it was. Everything seems to work again. The home directory files were not deleted when the user account was deleted so everything just reattached.
    Still have no idea how we managed to get things so confused in the first place? The Server UI is so much more complicated and inconsistent from the client OS for dealing with users. The Mac OS X Server for Dummies book I found did not have a troubleshooting section and was no help in resolving this. We ended up contacting the Mac User's Group.
    I was blown away to get an email survey from Apple support asking me to rate my opinion of my help request. I didn't get any help! They told me my 3 years of AppleCare don't apply to the Server OS I installed separately after buying the mac. Mac OS X Server has 90 days of support that I never used but had expired. They offered to sell me a help ticket for $99.
    This has not lived up to the user experience I was hoping to have. I regret the day we "upgraded" to the server. Is there a way to downgrade? Now that there is only 1 unlimited version, we're totally stuck. We have no mac client connected, just PCs via sftp, ssh, vnc, & X windows...

  • UME Actions - Manage All User Passwords

    Hello everyone,
    I am trying to create a role for our service desk to be able to manager users and be able to unlock them and/or reset their passwords. So I created a role with the identity management iview and gave the role the assigned action "Manage_All_User_Passwords". On <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/5f/670db7939b8e48999d65f8a05ad611/frameset.htm">sap help</a> it says of this action:
    "Provides permissions required by a user to change the password of other users independent of company. This also enables the user to view all user profiles."
    Now the problem comes in with users in different companies. Any user I assign this role to is only able to search for users in their own company. Is there some other configuration I need to do or permissions I need to change to be able to manage the passwords of users in different companies?
    We are running NW04s SPS10
    Thanks for any help,
    Chris Bahr

    Yonko,
    The role's assigned to my test user are all user created. There are no other assigned actions that would interfere. I have not assigned the delegated user admin role as this would give more power to the user than we want. What we are going for is a role for our support people to be able to unlock and reset people's passwords. So we just want them to be able to be able to unlock and reset the passwords of all users in all companies, which I assumed manage all user passwords would do, but I am obviously missing something.
    Best Regards,
    Chris

  • Extension Manager (CS4 & CS5) shows wrong language

    What more can I say? I discovered this problem running the CS4 Master Suite but fumbled through the dialog box and got the install of PixelBender to work. Now that I'm back with CS5 I'm still having the same problem. No language problems anywhere else but in Extension Manager. I'm using a Mac Pro, Snow Leopard, and the CS5 Design Premium Suite. The incorrect language appears to be German, though I don't speak or write German, so I'm not certain. Screen shot below. Thanks!

    Thanks adaceyphoto to report this issue and provide another workaround. So far we haven't reproduce this problem in our environment, in order to help us catch it and do further analysis, could you please help to reproduce it in your Mac again and send us the log messages?
    First, you need to restore the deleted languages again, and don't forget Danish.
    Here are the steps to generate log messages:
    1. Go to the installation folder of your Extension Manager, right click "Adobe Extension Manager.app", and select "Show Package Contents".
    2. In the new Finder windows, select "Contents" --> "MacOS". In the MacOS folder, create a file named "ExManLog.YES", please make sure the created file has extensions ".YES". (You can right click on that file and select GetInfo to check the Name&Extension).
    3. Launch Extension Manager, try to reproduce the language problems.
    4. Close Extension Manager, open folder "/Users/$YOURNAME/Library/Application Support/Adobe/Extension Manager CS5/", there should be some files with ".log" format. These are the log files generated by Extension Manager.
    5. Delete the ExManLog.YES file which is created in step 2, otherwise it will slow down your Extension Manager to generate log files.
    It seems not able to attach files here, so please send the packaged log files to my email address. You can find my email address from your private message box.
    Thanks.

  • Iphone 4 showing wrong IP address for home wireless

    2 days ago we reset our home wireless password and updated our devices (ipad, laptop, and two cell phones). Now my iphone 4 will no longer connet to the wireless. It accepts the new password to join the network but it never connects. It is showing wrong IP address. How can I change it to the correct IP ? Tried hard rest, forget network, and renew lease all trying to get it to automatically update the info. Out of ideas. Any suggestions?

    I have the exact same router as you, I have Comcast, and I am having the exact same INFURIATING problem.
    Comcast and Apple have no ideas. Linksys tells me I am having a router problem.
    I even went so far as to buy a new router and modem from Linksys (as they claim they no longer make the router/modem combo because it doesn't work well). I still don't buy this... my PC, my PS3, my DS... all of them connect to the router perfectly.
    I have the new modem and router here and planned to give that a whirl tonight but Comcast was being difficult and saying it could take 72 hours to activate my new modem. Totally unsat. I had them reconnect the WCG200 and I am still trouble shooting to no avail...
    If anyone finds a fix (short of a new router and new modem)... please post!

  • LR 5.3 showing wrong thumbnails

    I have been running LR 5.3 smoothly for a while but a couple of minutes ago LR started to show wrong thumbnails, it shows thumbnails from a delete Snapshot. I have tried purging my cache but nothing happens. I have upgraded from LR 3 to LR 3.5  Ideas ? This is my system:
    Lightroom version: 5.3 [938183]
    Operating system: Windows 7 Home Premium Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 2
    Processor speed: 1.9 GHz
    Built-in memory: 3003.1 MB
    Real memory available to Lightroom: 3003.1 MB
    Real memory used by Lightroom: 912.9 MB (30.4%)
    Virtual memory used by Lightroom: 901.7 MB
    Memory cache size: 364.0 MB
    Maximum thread count used by Camera Raw: 2
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1366x768
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.3
    Library Path: C:\Users\User\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
    Settings Folder: C:\Users\User\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) 500px
    2) Behance
    3) Canon Tether Plugin
    4) Facebook
    5) Flickr
    6) Leica Tether Plugin
    7) Nikon Tether Plugin
    8) SmugMug
    Config.lua flags: None
    Adapter #1: Vendor : 8086
        Device : 2a42
        Subsystem : 360b103c
        Revision : 7
        Video Memory : 64
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers (Conexant High Definition SmartAudio 221)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: LR5x89
    CardID: 10818
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: Mobile Intel(R) 4 Series Express Chipset Family
    ShaderModel: 10.0
    Vendor: Intel
    VendorID: 32902
    Version: 8086:2a42:360b103c:0007

    I have had this problem also ever since I updated to 5.3,  I think it is a major bug!
    At random the preview window on the left doesnt show the preview of the presets anymore when I hover them, and when I click back and forth to other images it suddenly starts working again, its a very annoying problem and I cannot believe that Adobe isnt aware of it yet!
    Marcel

  • "Invoice History Report "show wrong balance for supplier invoice with USD

    Invoice History Report show wrong balance for supplier invoice with USD Currency
    After I run this report i see in the last of this report there is difference between the supplier total
    USD (Currency ) and the open Balance USD , it is decreased the open balance
    for supplier with 2300 USD with out any reasons
    bellow is some data copy of the report
    ======================================================
    Supplier Site Total: SAR 34,700.00
    Supplier Site Total: USD 39,000.00
    Supplier Total: SAR 34,700.00
    Supplier Total: USD 39,000.00
    Open Balance: SAR 34,700.00
    Open Balance: USD 36,700.00
    *** End of Report ***
    ==============================================
    please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
    or it is bug in this report , becuase i compare this report with other report in account payable like
    -supplier open balance letter
    -invoice register report
    -invoice aging report
    all this report give me the amount for supplier USD =39000
    BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
    thanks

    Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
    Thanks

  • I am signed in itunes with me apple id and my iphone /ipad is in the same id but when i go in manage devices its only showing my iphone?

    I am signed into itunes with my id and my iphone / ipad are also on this id but when i go in to manage devices its only showing the iphone. Also just up dated my ipad now its saying not charging when its hooked up to the computer?

    If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

Maybe you are looking for