Firewire port not working?

tonight, my DVD burner and my Firewire HD are not being detected. I tried to see if system profiler recoginized my firewire port, but All I got was 'No information found.' what can I do to fix this? I need to access this FW hd because it contains all of my music, photos and critical data! thanks!

it seems weird that it just magically started working!

Similar Messages

20" Cinema display with USB and firewire ports not working

I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
Any help please

Verify that the display’s USB and FireWire cables are firmly plugged in to the
computer. Do they show in your profiler?
Try different ports in the computer.
Verify that your computer ports are working with other known problem free device.

Firewire port not working Mac Mini (G4 1.25ghz)

Hi,
The firewire port isn't working on my mac mini, I've tried several devices, but none are connecting. I was wondering if anyone else was having this issue and possibly a solution. The only software installed on the computer since the firewire worked last was Apple updates, so maybe other mini's lost firewire somewhere along the way.
Thanks, and Thanks
W

This worked from Smokerz in the Power Mac G4 forum:
1. Shut-down your Mac, and unplug the power cord
2. Turn the power off on your external FireWire devices
3. Unplug the FireWire devices from the Mac
4. Wait for 5 min.
5. Plug the power cord to your Mac only
6. For PPC Macs: Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
7. At the ">" prompt type:
reset-nvram and hit the Return key
set-defaults and hit the Return key
reset-all and hit the Return key
the last command will restart your mac
8. Shut down your Mac
9. Connect all your FireWire devices to the Mac and turn them on
10. Restart your Mac.
Works fine now thanks Smokerz!!!!!
also repaired permission and reset PRAM, nothing worked until I did this.
W

New 2011 MacBook Pro Firewire Port Not Working with Focurite Saffire 24 DSP

The firewire port powers the Saffire 24 alone, and the device shows up in the system profiler, but I can't see it in the Sound devices menu... I have updated all of the Focusrite drivers to version 2.2 so I need to ask this board for solutions.

i am having the same exact problem. However, I've never had a Focusrite Driver installed previously. I just bought the Interface and installed the software. It downloaded the newest version of the software to install.
If it also installed the previous drivers, how would I unistall those?

Firewire Port not working, URGENT help please¡¡¡

Hello People, i´ve just got a new Mac Mini last week, and i´ve been trying to get my Alesis MasterControl audio interface, and is just a complete mess.
This happened right after i´ve upgraded to 10.8.3 so i don´t know, the weird thing is that if i connect my old iBook to the Mac Mini the FW800 port works, but everytime i connect the audio interface, nothing happens, also the drivers from alesis, are up to date. i first thought about the port of the Mixer went bad, but it has 2 and non of them works, also thought about the cable but the same cable works when i connect my iBook, and the mixer is not bus powered, it has it´s own power supply.
Needless to say i´ve already done the usual reset PRAM, turn of the Mac unplugged for 30 hour to reset the bus. etc.
This is the usual firewire only system log that i get:
31/03/13 08:01:20.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 08:01:30.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 11:33:23.529 system_profiler[528]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:35:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:38:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:42:08.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:44:39.124 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.146 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:39.148 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.149 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:52.727 coreservicesd[62]: Application App:"AlesisFirewireUninstaller" [ 0x0/0x7f07f] @ 0x0x7fb5c8c30050 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x80080:) ), so denying.
31/03/13 11:44:52.727 WindowServer[85]: [cps/setfront] Failed setting the front application to AlesisFirewireUninstaller, psn 0x0-0x7f07f, securitySessionID=0x186a5, err=-13066
31/03/13 11:47:28.533 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:47:28.544 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:49:26.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:52:39.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:57:22.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 11:57:34.000 kernel[0]: Alesis Firewire - 3.5.3.8671 preliminary - x86_64 CJ - May 3 2010 02:43:28
31/03/13 11:58:36.982 com.apple.launchd.peruser.501[155]: ([0x0-0x1d01d].tc.tctechnologies.AlesisFirewire.controlpanel[238]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:37.252 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[238] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115837_Mac-mini-de-Miguel.crash
31/03/13 11:58:39.831 system_profiler[267]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:58:50.676 com.apple.launchd.peruser.501[155]: ([0x0-0x23023].tc.tctechnologies.AlesisFirewire.controlpanel[274]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:50.837 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[274] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115850_Mac-mini-de-Miguel.crash
31/03/13 11:58:53.638 system_profiler[277]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:59:09.747 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.905 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 11:59:09.906 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.907 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 12:00:47.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:00:59.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:01:56.720 system_profiler[269]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:05:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:08:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.
31/03/13 12:12:42.278 AlesisFirewire Control Panel[245]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
31/03/13 12:13:53.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:25:29.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:25:38.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:28:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:28:33.906 system_profiler[273]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:31:41.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:35:16.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:35:26.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:37:53.513 system_profiler[266]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:39:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:39:49.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:42:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 53 bus resets in last 3 minutes.
31/03/13 12:46:50.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 68 bus resets in last 3 minutes.
31/03/13 13:01:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:01:41.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:05:27.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 79 bus resets in last 3 minutes.
31/03/13 13:06:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:09:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:13:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:13:45.006 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:13:45.008 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:13:54.818 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:54.823 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:13:56.372 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:56.375 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:15:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:18:46.763 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:18:46.768 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:18:46.797 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:18:46.800 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:18:50.775 system_profiler[221]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:18:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:21:03.488 system_profiler[235]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:22:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:24:07.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:24:19.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:31:00.926 system_profiler[316]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:33:03.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 134 bus resets in last 3 minutes.
31/03/13 13:35:11.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:38:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:41:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:44:48.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:58:13.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 14:01:25.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
Can somebody help, please i´d gladly appreciate it.

I have this
System Profiler[170]
SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
& this
kernel FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Pls, help!!

Firewire ports not working.

Hello I am new to Apple, i recently purchased an Imac ( 10.6.4 ) and a firewire solo audio interface, the interface isn't being recognised and i've tried all the recommended solutions but none have worked.
I recently found out about "hot plugging" and I think its possible i may have been too eager and plugged my interface in before the computer had completely shut down. The interface receives power from the mac still but it isn't recognised.
So far i've tried, installing newest sofware, reinstalling, verifying disk/disk permissions. Turning of the mac, unplugging for 10 minutes etc.
If anyone has suggestions as to ways of knowing if the port is actually damaged and if so if apple can replace my mac etc. (I'm within the 90 days purchase).
Any help or information would be much appreciated

Ugh... I am having exactly the same symptom on what is probably exactly the same machine.
The laptop recognizes the drive and deals with it.
The imac did so at first, but a couple of days ago it began to have trouble mounting it.
"About This Mac" sees it (sometimes even identifies its Oxford chipset) but no more progress. Disk Utility sees it sometimes, but no success mounting it either.
And just for kicks (you might want to try this too) I tried to boot the imac in firewire mode with the live laptop and although the system hard drive showed up in the laptop's Finder, Disk Utility could not begin to verify the drive before things got ugly. After that attempt the drive would not dismount properly and I had to--gasp--turn it off without doing so. Fortunately the imac booted up without a hitch.
Firewire, firewire...
mac Mac OS X (10.4.5)

New 2011 MacBook Pro Firewire Port Not Working with Firewire Solo

Kind of an odd problem:
I'm basically trying to go from my MBP through firewire to a firewire solo audio interface and then from there out to two speakers. (MBP>Firewire Solo>Speakers) The light on the firewire solo turns on when I connect the firewire cable, but when i try to play sound nothing comes out. Yes, I've checked the volume. Yes, I've checked system preferences. It's not the cable, the interface, or the speakers as I've check all these with my old computer and they work fine. Also, I've plugged in the firewire solo to check if it was a power problem -- still no sound. What's going on!?

Could it just be a hardware problem?

IMac FireWire Port Not Working

Hi guys, my system is a 24" 2.8GHz Intel-based iMac. Whenever I plug a device into the FireWire 400 port it powers the device but the iMac doesn't see the device - it doesn't show up in Disk Utility. There are no problems with the devices as they work perfectly with my other Macs. Any idea on whether I can fix this without taking it to an Apple Store? It seems like a Firmware issue.

Hi DrRGrant
First reset the SMC > http://support.apple.com/kb/HT3964
+1. Shut down the computer.+
+2. Unplug the computer's power cord.+
+3. Press and hold the power button for 5 seconds.+
+4. Release the power button.+
+5. Attach the computers power cable.+
+6. Press the power button to turn on the computer.+
Then if that doesn't work, give this a go: > http://support.apple.com/kb/HT1317
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
Dennis

Firewire port previously working now not recognized

Hello,
I understand this particular issue has been discussed at length on this forum and in other places but none of the solutions have yielded any success for me and I see this is often the case for others. So, I'm posting the question again in hopes that there is an Apple guru out there who has figured this one out. (All relevant specs below.)
Problem: Firewire port was working fine for downloading video from a Panasonic PV-GS320 into iMovie 8.0 on an iMac 10.5.8. Then, suddenly the firewire port was no longer recognized:
FireWire Bus:
Warning:          Unable to list FireWire devices.
Maximum Speed:          Up to 800 Mb/sec
The problem cannot be with the camera or cable as I can swap them over to an iBook 10.4 and the camera and firewire download perfectly there.
I have run AHT. Test results show no hardware problems.
I've tried all of these suggestions:
http://docs.info.apple.com/article.html?artnum=88338
http://macperformanceguide.com/blog/2011/20110808_0_Firewire800--howto.html
and quite a number of other solutions that involve rebooting SMC and PRAM but no dice.
I'm guessing this might be some kind of driver or software issue. There's got to be a simple solution to kick this thing in the butt and get it working again. I'd prefer not to do an OS re-install if I can avoid it.
Thanks much! Below are the specs:
iMac: 10.5.8
2.4 GHz Intel Core 2 Duo
4 GB 667 MHz DDR2 SDRAM
Firewire: 800 Mb/sec

Hi Tom,
I've had an opportunity to try all of the options listed on those links. I did omit one however, the Combo Update for 10.5.8. I hesitate to pursue this one b/c from what I can understand this 1GB's worth of update is basically a reinstall of the OS. I'd prefer not to take such a drastic action b/c I'm in the middle of editing a documentary and I don't want any other hardware or software to malfunction or alter behavior while I'm in mid-stream.
Let me know if I'm mistaken about this. As it stands the Combo Update is my last option, otherwise I'm just going to move forward with a dead port.
Just as a sidenote: the behavior of the firewire recognition has changed. Now, the system does not recognize the firewire plugged in at all. I used to get an error message, now nothing.
Thanks Tom and BDAqua.
If anyone else is reading this post I'd like to hear from someone who has experienced the same problem and found a/the solution.
Best Regards,
-J Mann

Firewire port not suplying energy wen runing only with battery

Hi all,
since today I v noticed that if my MBP is not connected to the power adaptor
will not suply energy any more to the Firewire 400 port (the only one I have ).
This is a problem because I am often working with ext drive on the run...
any idea on why this is happening ?
I v just got back my laptop back from the Apple store were they have replaced the
optical drive and they v told me that firewire port was working fine.( I was suspecting something cauz I v had several hardrive unmounting without any reason).
Now that my laptop came back there is this issue...
best
Shiama

Your computer should provide power to the Firewire port when running on battery as long as the computer is not shut down or sleeping, shiama. If it is sleeping or shut down then it will only provide power when the power adaptor is plugged in.
You could try resetting the SMC and PRAM . Perhaps try another FW cable to make sure that this is not the cause of your problems, though I presume, from what you say, that power is supplied to the FW drive normally if the power adaptor is plugged in.
Some supposedly bus powered FW drives may need more current than the battery alone can support though. What brand and model is the drive? Has it worked off battery alone before? Are any other devices attached, and were you running software that places a heavy demand on the CPU or Graphics processor when the external drive was in use?
Cheers
Rod

Ports not working on TBD connected with iMac

I have a 27 inch Thunderbolt display connected with a 27 inch iMac. All the port (USB, Firewire) were working on the TBD. Then a software update of TBD came and since then none of the ports (USB, Firewire) are not working anymore on the TBD.
Before I could adjust brightness on the TBD, now I can't even do that.
Anyone facing the same problem

Hi Danny
Using what adapter(s) and cable(s).....?
Check the TVs owners manual or LGs support site, there maybe a way to reset the HDMI ports if they were tripped or overloaded by a bad cable or connection.
Dennis

What is wrong with my 30" Cinema Display? The USB and FireWire ports still work, but the screen is pitch black. When you plug it into the computer, it detects that it's a Cinema Display.

When you plug it into the computer, it detects that it's a Cinema HD but the screen is pitch black.
For some reason, the USB and FireWire ports still work.

If you shine a really bright light directly into the screen can you then see a faint image on the screen? If so, that would indicate the backlight has died (hardware failure) and the unit needs repairing.

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

Touchsmart TX-2 fingerprint scanner and USB ports not working

Hi everyone,
Please forgive me if this is in the wrong spot.
Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
All advice really welcome and very much appreciated!
Thanks in advance

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Firewire port not working?

Similar Messages

Maybe you are looking for