Firfox 6 won't load my gmail..windows 7-64bit--help?

I get error code 404 bad request.
Thanks.

Thanks! I had the exact same problem. i'd reinstall iTunes and it would work for a sync or two, then nothing. Uninstalling Avast worked!

Similar Messages

My MacBook Pro won't load my CD with pictures. Help me :(

I bought my laptop a couple months ago so I know it's not because my computer is old, but my picture CD won't load or open or anything. It makes a noise like it's going to start up, but still I get nothing. It works on my parents' desktop computer, but not mine please help me!

Hi JustinAlexa,
You don't say if other CDs or DVDs work. Please check out this article which goes through troubleshooting optical disc reading.
Archived - Troubleshooting a CD-ROM or DVD-ROM Disc That Does Not Appear on the Desktop
http://support.apple.com/kb/ts2288
If it's just the one CD, it's likely an issue with that CD. See if another copy can be made and try that.
Best Regards,
Nubz

Updates tab won't load in the app store.. help please!

Recently updated my iPhone 4s to iOS 6.1 and I have apps to update but my updates tab in the app store won't load!
I've tried everything I can, restarting my phone, turning on and off wifi, crossing the app and opening it again but none have worked so far!

Same problem here, I've tried everything and nothing is working.
Very very disappointed.

The file just won't load into array...Please Help!

hi i need some help in loading a binary file into an array so that i can edit the data that was saved from previous run..
i could save the file but after that when i try to load it back to memory...i can't...ie. all the information keyed in were lost...please help
this is the Code for the loading process...
     public static void loadAircraft (ArrayList aircraft) {
          try {
               FileInputStream filein = new FileInputStream(".\\Data\\Aircraft.bin");
               ObjectInputStream objectin = new ObjectInputStream(filein);
               Aircraft craft = (Aircraft) objectin.readObject();
               aircraft.add(craft);
               objectin.close();
               filein.close();
          catch (Exception e) {}
     }the above code won't load anything into memory...is there a way for overcoming this?
inside the Aircraft class there are four different data of which they contain two differen data types.
one of which is String and the other three are in int.
Awaiting for reply...thanks

yes...its some objects of an array that i am trying to load back...
erm...i'll show you the whole code maybe...
//to reference the swing library
import javax.swing.*;
import java.util.*;
import java.io.*;
public class SetupAircraft {
     static ArrayList aircraft;
     public static void init () {
          aircraft = new ArrayList(5);
          loadAircraft(aircraft);
     //opens up another sub group while the user
     //entered 1 as his/her option in the SetupSystem
     //menu
     public static void Setup () {
          //this will create a string that is going to be displayed
          //in the input dialog box
          String menu = " Please select an option: \n"
                          +"----------------------------\n"
                          +"1) Add New Aircraft\n"
                          +"2) Edit Existing Aircraft\n"
                          +"3) List Aircraft\n"
                          +"4) Delete Existing Aircraft\n"
                          +"5) Save\n"
                          +"6) Return to Main Menu\n\n"
                          +"   Enter a number between 1-6\n";
          //declare a field named option for selection through menu
          int option = 0;
          //continue the loop until the user inputs the number 6
          do {
               //error handling for the input from the menu
               //if the input is not integer the error is caught and
               //reassigning option to be 0
               try {
                    option = Integer.parseInt(JOptionPane.showInputDialog(null, menu,
                               "Setup Aircraft", JOptionPane.QUESTION_MESSAGE));
               catch (NumberFormatException e) {
                    option = 0;
               //determine which option the user has chosen
               //and enters the respective section
               switch (option) {
                    case 1: add(aircraft);
                              break;
                    case 2: edit(aircraft);
                              break;
                    case 3: list(aircraft);
                              break;
                    case 4: //delete(aircraft);
                              break;
                    case 5: save(aircraft);
                              break;
                    case 6:     return;
                    default: JOptionPane.showMessageDialog(null, "Please enter a number between 1-6",
                               "Alert", JOptionPane.ERROR_MESSAGE);
                               option = 0;
          while (true);
     public static void add (ArrayList aircraft) {
          String type = "";
          int first = 0;
          int business = 0;
          int economy = 0;
          do {
               try {
                    type = JOptionPane.showInputDialog(null,"Enter Aircraft Type", "Prompt for Type",
                    JOptionPane.QUESTION_MESSAGE);
                    try {
                         if(aircraft.contains(type)) {
                              JOptionPane.showMessageDialog(null, type + " already exist!",
                              "Error", JOptionPane.ERROR_MESSAGE);
                              type = "-100";
                    catch (Exception e) {}
                    if (type=="-100");
                    else if (type.length()==0) {
                         JOptionPane.showMessageDialog(null, "Please enter an aircraft type",
                         "Error", JOptionPane.ERROR_MESSAGE);
                    else if (!(type.startsWith("-",3))) {
                         JOptionPane.showMessageDialog(null, "Please enter the aircraft type with XXX-XXX format where X is integer.",
                         "Error", JOptionPane.ERROR_MESSAGE);
                         type = "0";
               //catch the input error that the user has produces.
               catch (Exception e) {
                    return;
          while (!(type.startsWith("-",3)));
          //try to ask the user for the passenger's name and if the name field contains
          //no characters at all repeat the prompt for name field until the user presses
          //Cancel.
          try {
               first = Integer.parseInt(JOptionPane.showInputDialog(null, "Enter First Class Capacity",
               "Prompt for Capacity", JOptionPane.QUESTION_MESSAGE));
          catch (Exception e) {
               String error = "For input string:";
               if (e.getMessage() == "null") {
                    return;
               else if (e.getMessage().startsWith(error)) {
                    JOptionPane.showMessageDialog(null, "Please enter only numbers",
                    "Error", JOptionPane.ERROR_MESSAGE);
          try {
               business = Integer.parseInt(JOptionPane.showInputDialog(null, "Enter Business Class Capacity",
               "Prompt for Capacity", JOptionPane.QUESTION_MESSAGE));
          catch (Exception e) {
               String error = "For input string:";
               if (e.getMessage() == "null") {
                    return;
               else if (e.getMessage().startsWith(error)) {
                    JOptionPane.showMessageDialog(null, "Please enter only numbers",
                    "Error", JOptionPane.ERROR_MESSAGE);
          try {
               economy = Integer.parseInt(JOptionPane.showInputDialog(null, "Enter Economy Class Capacity",
               "Prompt for Capacity", JOptionPane.QUESTION_MESSAGE));
          catch (Exception e) {
               String error = "For input string:";
               if (e.getMessage() == "null") {
                    return;
               else if (e.getMessage().startsWith(error)) {
                    JOptionPane.showMessageDialog(null, "Please enter only numbers",
                    "Error", JOptionPane.ERROR_MESSAGE);
          Aircraft newAircraft = new Aircraft (type, first, business, economy);
          aircraft.add(newAircraft);
          JOptionPane.showMessageDialog(null, "Aircraft Sucessfully Added",
          "Successful", JOptionPane.INFORMATION_MESSAGE);
     public static void edit (ArrayList aircraft) {
          String type = "";
          int first = 0;
          int business = 0;
          int economy = 0;
          do {
               try {
                    type = JOptionPane.showInputDialog(null, "Enter Aircraft Type to Edit",
                    "Prompt for Type", JOptionPane.QUESTION_MESSAGE);
                    if (type.length()==0) {
                         JOptionPane.showMessageDialog(null,"Please enter an aircraft type",
                         "Error",JOptionPane.ERROR_MESSAGE);
                    else if (!(type.startsWith("-",3))) {
                         JOptionPane.showMessageDialog(null, "Please enter the aircraft type with XXX-XXX format where X is integer.",
                         "Error", JOptionPane.ERROR_MESSAGE);
                         type = "0";
               catch (Exception e) {
                    return;
          while (!(type.startsWith("-",3)));
          try {
               int edited = aircraft.indexOf(new UniqueAircraft(type));
               Aircraft craft = (Aircraft)aircraft.get(edited);
               try {
                    first = Integer.parseInt(JOptionPane.showInputDialog(null, "Enter First Class Capacity",
                    "Prompt for Capacity", JOptionPane.QUESTION_MESSAGE));
               catch (Exception e) {
                    String error = "For input string:";
                    if (e.getMessage() == "null") {
                         return;
                    else if (e.getMessage().startsWith(error)) {
                         JOptionPane.showMessageDialog(null, "Please enter only numbers",
                         "Error", JOptionPane.ERROR_MESSAGE);
               try {
                    business = Integer.parseInt(JOptionPane.showInputDialog(null, "Enter Business Class Capacity",
                    "Prompt for Capacity", JOptionPane.QUESTION_MESSAGE));
               catch (Exception e) {
                    String error = "For input string:";
                    if (e.getMessage() == "null") {
                         return;
                    else if (e.getMessage().startsWith(error)) {
                         JOptionPane.showMessageDialog(null, "Please enter only numbers",
                         "Error", JOptionPane.ERROR_MESSAGE);
               try {
                    economy = Integer.parseInt(JOptionPane.showInputDialog(null, "Enter Economy Class Capacity",
                    "Prompt for Capacity", JOptionPane.QUESTION_MESSAGE));
               catch (Exception e) {
                    String error = "For input string:";
                    if (e.getMessage() == "null") {
                         return;
                    else if (e.getMessage().startsWith(error)) {
                         JOptionPane.showMessageDialog(null, "Please enter only numbers",
                         "Error", JOptionPane.ERROR_MESSAGE);
               Aircraft newAircraft = new Aircraft (type, first, business, economy);
               aircraft.add(newAircraft);
               aircraft.add(newAircraft);
               JOptionPane.showMessageDialog(null, "Successfully edited aircraft\n"+type+" to capacities\n"
               +"First: "+first+"\n"+"Business: "+business+"\n"+"Economy: "+economy,
               "Successful", JOptionPane.INFORMATION_MESSAGE);
          catch (Exception e) {
               JOptionPane.showMessageDialog(null,e.getMessage(),"Error",JOptionPane.ERROR_MESSAGE);
     public static void list (ArrayList aircraft) {
          JOptionPane.showMessageDialog(null, aircraft.size()+" aircraft found", "Found",JOptionPane.INFORMATION_MESSAGE);
          Object[] aircrafts;
          aircrafts = aircraft.toArray();
          for (int i=0;i<aircraft.size();i++) {
               Aircraft a = (Aircraft) aircrafts;
               JOptionPane.showMessageDialog(null, a, "Aircrafts" + (i+1), JOptionPane.INFORMATION_MESSAGE);
     public static void save (ArrayList aircraft) {
          try {
               FileOutputStream fileout = new FileOutputStream(".\\Data\\Aircraft.bin");
               ObjectOutputStream objectout = new ObjectOutputStream(fileout);
               Object[] aircrafts;
               aircrafts = aircraft.toArray();
               objectout.writeObject(aircrafts);
               objectout.close();
               fileout.close();
               JOptionPane.showMessageDialog(null,aircraft.size()+" aircrafts saved", "Sucessful", JOptionPane.INFORMATION_MESSAGE);
          catch (IOException e) {
               JOptionPane.showMessageDialog(null,e.getMessage(),"Error",JOptionPane.ERROR_MESSAGE);
     public static void loadAircraft (ArrayList aircraft) {
          try {
               FileInputStream filein = new FileInputStream(".\\Data\\Aircraft.bin");
               ObjectInputStream objectin = new ObjectInputStream(filein);
               Aircraft craft = null;
               while ((craft=(Aircraft)objectin.readObject())!=null) {
                    aircraft.add(craft);
               objectin.close();
               filein.close();
          catch (Exception e) {
               JOptionPane.showMessageDialog(null,e.toString());
               e.printStackTrace();
i think thats a bit too long..but it would explain what i am trying to save...its linking to the class Aircraft tho...
thanks...i appreciate your help...

MSI P45-8D problem: reboot after loading startup services (windows seven 64bit)

hi guys!
I decided (buying a cooler master elite 360) to keep my Memory Lover (whit ddr3/ich10r, pci-ex 2.0), which is actually the 'best purchase for me (rather than a G41 mATX) .
But then, after I had solved the problem of overheating in the pci-ex, and I put the board in its box for weeks, now has a new problem:
Continuous blocks & reboots just after loading startup services windows seven!
The setup is this:
Windows Seven 64bit
MOBO MSI Memory Lover
CPU Xeon L3110
VGA MSI Radeon HD5450 1gb ddr2 fanless
DDR3 1333 4GB
PSU Tacens Radix V mATX 35Watt Velociraptor + Caviar Green
DVD burner (sata)
Esi pci-ex sound card connect module
Creative Xtreme Gamer (disconnected for now)
I have many ram models that I can put in:
kingston lovo 4gb 1333
4g-skill eco 4gb 1333
adata green 4gb 1333
corsairs white 8gb 1600
All memories can work undervolt at 1.35volt, but-of course-I keep them in standard 1.5Volt for more stability
I also tried a single 2gb stick at a time, but nothing has changed
when the system reboots (I infer) windows finished loading all the startup services (including antivirus, network drivers, audio drivers, etc. ..). and I can say with near certainty, that the last major service that is loaded, is the catalyst control center ...
I suspect an incompatibility with Memory Lover & the Video Card's ATI driver ..
I also tried to uninstall and clean with driver sweeper, but the problem remains ..
Besides this I also have a problem with the temperature of the processor xeon l3110 (45watt tdp)
cpu heatsink as I have a Arctic Freezer LP 11 (Capacity Cooling 100W).
with thermal compound pre-installed I had 60/70 degrees recorded.
I changed the thermal compound with the famous Prolimatech pk-1 and now I measure 80/90 degrees ...(and I've changed a lot of thermal compound that I put with my eyes closed)
now, this is not possible because:
-I know the processor, I kept in daily use at 3Ghz with a noctua nh-U9B se2, and in summer never exceeded 40 degrees (d 'winter was about 30 degrees)
- Either with the Scythe kama thermo, that with my finger, the heatpipes of the Freezer 11 LP, the Mosfet, the NB & SB are all cold .. the 5450 is 40 degrees or so, but it is fanless, and its temperature is in its normal ..
What can you tell me of my two problems:
- Continuous reboots after loading windows seven
- High temperature cpu (probably not real)
I remind you that a few months ago the team & Memory Lover Xeon L3110 worked perfectly.
The PSU is a new 350Watt Tacens Radix V mATX ... the system at idle consumes 70/80 watts (measured at the wall) ... I think it Is not a problem of the little power supply for the needs of my system ..
and anyway I can try to use an old Enermax 450watt Liberty, which I keep for emergencies..
thanks
max

guys,
I solved the problem!
the sink was installed wrong, and did not touch on the processor!!!
the problem was the mosfets around the cpu that make thickness in height ..
the thermal paste was put well and ... still immaculate!
processor took about 20 (or more) of restarts and very high working temperatures!
it rocks!!
I can now say that the 'AC Freezer 11 LP is sensational!
The Xeon L3110 (with EIST, C1E & Acpi active together, That downclok it) works now to 23-25 degrees!!
I have installed the ddr3 kingston 4gb Lovo 1333 + 8GB Corsair 1600 1.35Vram white.
(with 12GB, I can easily do a large Ramdisk for temporary files).
I installed hd5450 driver manually, but still the catalyst control center does not appear at startup
here is the screen of the situation:
finally...but how did I doubt the quality of this MSI board?

ITunes 10.5 won't install on my Windows 7, 64bit

This keeps comming up when I try to download iTunes 10.5 on my Windows 7 ,64bit
Can someone help me so I can install iTunes and be able to sync songs on my iPhone???

Yes. Please give us something to go on other than a complete reinstall of Windows 7 (Microsoft's solution to the issue behind this cryptic error).
At least acknowledge that the issue lies with Microsoft and an error in upgrading/installing the Visual C++ 2005/2008/200x Service Pack.
A client would like to install iOS 5 from their common Lenovo X61 laptop, but iTunes 10.5 will not install. I had to reinstall iTunes 10.4.x just to regain access to his media.

Samsung Convoy 2. Won't load driver for Windows XP

I am trying to use any of several programs to access data on my Convoy. I am using Windows XP, on a laptop and another XP machine that is a desktop.
When I plug the phone into the laptop, a box pops up that says, "Software is available that will help your Convoy 2 (SCH-U660) communicate with You PC. Download Now?"
I click "Yes" and I get a downloading and installing box but right after clicking "Yes," I also get an error that says, "Windows cannot find 'C:\Documents and Settings\mlzbb\Local Settings\temp\VerizonRCFile.EXE'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
The thing is, I did not type any name. The software did this automatically.
The install box just stops and looks as though it's complete, but it still says "Installing."
On the original error, when I click OK, it says, "Error installing Samsung Mobile USB Driver, Exiting..."
When I click OK on that box, the installing box goes away and nothing else happens.
I manually installed VZAcces Manager but it does not see the phone.
On the destop machine with XP, it detects that something has been connected to it, but it just sees the phone as a USB storage device. I don't get any pop-up for the software.

Here's what has worked for me for installing drivers for a Samsung non-smartphone and an LG non-smartphone on a PC using Windows XP. Hopefully you'll have the same outcome that I have had.
- keep the cellphone unplugged from the computer
- head to http://www.vzam.net/download/download.aspx
- navigate through these menus
1. What operating system are you using?
2. What device are you using?
3. What hardware are you using?
- and select Samsung U660 ("Convoy 2")
- Download the vzam file
- This file downloaded from that vzam.net link is set up to install two things: a driver and VZAccess Manager.
After you click on the file downloaded from vzam.net, the file will install first the phone driver. A message will appear on the screen such as
"Installing LG USB Modem Driver, this may take a moments ..."
or
"Installing Samsung Mobile USB Driver, this may take a few moments ..."
When the file is finished installing the driver and is ready to install VZAccess Manager, this message appears on the screen: "Welcome to the InstallShield Wizard for VZAccess Manager". And that message has two options -- "Next" and "Cancel". Because the file from vzam.net already finished installing the phone driver, we can click "Cancel" to cancel installation of VZAccess Manager.
At this point now that the driver is installed, when I plug the phone into the computer I now don't have any problems with the computer recognizing the phone.

ITunes won't load all the way...Help??

My iTunes store comes up, bar loads half way, no error message. It is only the white screen. I'm on Windows 7, and I have tried reinstalling it, restoring, repairing and uninstalling completely. I'm out of ideas. Can anyone help me? I can access my account, but I can't get anywhere else. The bar just stops loading. I've tried running diagnostics, but every time I do that, iTunes becomes non-responsive.

I've tryied installing iTunes 7 like 8 different ways and it won't install all the way each time it stops at "Resigtering modules"
by any chance, do you have SpyCatcher antispyware software installed on that PC? in quite a number of these "registering modules" hangs, modules installed by SpyCatcher have been interfering with the registration of the itunes modules.
if you do have SpyCatcher, try uninstalling SpyCatcher altogether prior to an itunes install. if the itunes install then goes through properly, you can reinstall SpyCatcher afterwards.

DW CS5 won't operate & has transparent windows. Any Help?!

I installed DW CS5, but it won't function. 1) I get a duplicate main menu bar (file, edit, etc.) above regular one that shows part of my desktop through a thin rectangular window in this bar. 2) When I try to create a new site, the new site window is also transparent with image of new website background showing through. You cannot see the browse folder icon on right nor the selection submenu on the left in this new site window. Can anyone help? I installed DW CS5 11.0.3 updater and GB18030, but neither helped. I'm running Windows XP SP3 on Intel Pentium 4 cpu, 2.80 ghz, 2.80 ghz, 512MB of ram. Thanks, JT77

I wouldn't be surprised if your 512 RAM is the problem.
Check the Sys Req on your version

"Apps"-Tab won't load in Creative Cloud Client - please help

I just made the subscription for the Creative Cloud and installed the client - but it's not working.
When I click on "Apps" to install the Adobe Apps (obviously) it just loads and loads without stopping. As a result, I'm not able to install the apps and therefore I can't use the cloud I'm paying for.
I know I'm not the only user with this problem. Please help!
(And I don't want any "have a chat with a professionell"-offers. I want a real solution)

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Mac Spinning Wheel https://forums.adobe.com/message/5470608
-Similar in Windows https://forums.adobe.com/message/5853430

Final Cut Pro won't load anything and keeps crashing.. help!

Just got FCP today with my new MBP. It was working fine and it crashed. Now I open and it doesn't load the clips and the timeline doesn't show the preview. I've attached a screenshot. It opens for about 30 seconds then crashes. I tried reparing permissions but got nothing. Any ideas?
As you can see dark blue areas shouldn't obviously have images but they aren't loading FCP is crashing

What are the specs if your computer? What are the specs of your media?
Trash your preferences. Trash event and project render files.

CS6 Extendscript Toolkit won't start on my Windows 7 64bit machine...

When launching ExtendScript I just get a blank application window with a totally unresponsive ui. I don't get a blank document on startup, I can't use any hotkeys, buttons or menu items to create or open a document. Compeletely dead. I tried deleting the preferences for it but that did nothing. I have uninstalled and reinstalled twice already. Searching the forums did not return much except for the deleting the preferences tip. Anybody have a clue as to why this is happening? The rest of the suite works fine bt I need the extendscript to do my job here.
Thanks,
James

Okay, I just figured out why it wasn't working and it's really stupid on both mine and adobe's part. At least I think so anyway. I downloaded the scripting guides for photoshop and illustrator because my install did not come with them. The reason the toolkit didn't start properly was because I wanted to keep all the scripting guides and docs in one place and put them in the sdk doc folder in C:\Program Files (x86)\Adobe\Adobe Utilities - CS6\ExtendScript Toolkit CS6\SDK\English
As soon as I removed them the toolkit started up fine. Yeah, I know, I shouldn't be putting stuff like that in the program files folder but really? Not starting becasue I put a few pdf's in its install folder? I was totally reaching for straws when I decided to move those pdf's out of there and just had to do a face palm for a day wasted trying to figure this out. Anyway, maybe my mistake will help others in the future.
James

The redeem section on my iTunes account won't load, but everything else will. Help?

Like it says, I can load everything in iTunes but the redeem section. It is quite frustrating. Can anyone help?

In iTunes on your computer, go to Store > Authorize This Computer from iTunes' menu. Have your dad (or you, if you know it) enter his Apple ID and password. Then sync again.

ITunes won't recognize iPad in Windows 7 64bit

I am posting this in the hope it will help other people who have this problem. I spent 7 months trying to find out why iTunes wouldn't recognize my iPad. The only way it was recognized, is if I uninstalled iTunes and reinstalled it.Once I turned off my computer, the next day when I turned it back on, it wouldn't recognize the iPad.
A month ago I bought a iPad 2, and I had 3 months of phone support. Nothing the technition suggested worked. We went through all the fixes that are documented in Apple's solution pages. He decided to send it up to the engineers. They asked for me to give them about 4MB of info from my computer from various hidden folders. The engineers told him they noticed I had 5 Malware programs and an antivirus program. Also that my chipset drivers were out of date or misconfigured.
They told him to start by uninstalling each malware and antivirus, one by one, keeping iTunes open, but unpluggin the iPad before uninstalling, to see if it connected. I uninstalled the first one, which is called Super Malware, and it didn't work, then I uninstalled Avast (free, it requires a computer restart after uninstalling, so you have to open iTunes again), and I plugged in the iPad, and voila, it worked.
All that time, Avast was keeping my iPad from being recognized in iTunes. A few Antivirus programs interfere with iOS devices. If you are having trouble, try uninstalling antivirus and malware programs, one by one, to see if they are the culprit. It is time consuming doing it one by one, but it's the only way to find the one that is causing the problems. We never got to the chipset problem, so I don't know if that would help anyone, and you should be careful when playing around with upgrading drivers for chipsets. If you do, make sure you know what you are doing.

Thanks! I had the exact same problem. i'd reinstall iTunes and it would work for a sync or two, then nothing. Uninstalling Avast worked!

New 2014 itunes won't install on my windows 7 64bit

Don't mean to beat a dead horse (if I am) though I've since spent too much time on trying to fix this amid this CESSPOOL of advertising known as Google/the internet. I just want my itunes, to work, rip cd's etc. IE7 64 bit, pc a few yrs old.... what are my choices? What are the true answers? Running MacAvee, CCCleaner, Malwarebytes....
suggestions appreciated
rob

Do you get an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

Firfox 6 won't load my gmail..windows 7-64bit--help?

Similar Messages

Maybe you are looking for