Firmware bug: CPU1 tried to use APIC500

Every time I want to use the computer (HP Compaq 6005 Pro small form factor) I have to switch it on and then push the reset button after booting up to a black screen.
I once got :
Firmware bug: CPU1 tried to use APIC500 (LVT offset0) for vector 0x400 but the register is already in use for vector 0xf9 on another CPU.
Any ideas?
Is Linux reporting a real firmware fault or is it wrong?

Hello anonio-mouse,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are getting the [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu. I have looked on the Ubuntu site and under the Bugs section I found the bug [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is alrea... so it looks to be a geniune error and is being addressed on the Ubuntu site.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Enjoy your weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Using twoo NVIDIA 7300 cards: firmware bug? Screen refresh problem

strange bug with Mac Pro 2.66 Xeon:
I have two Displays, 20 and 23".
When both connected to the standard NVIDIA card in the Mac Pro, evreything is fine.
I ordered a second NVIDIA card wich I installed in slot 4, using 8 lanes for this card.
Now, when one display is connected to the standard card and the second display is connected to the second NVIDIA card, the screen of the display connected to the build in card (the 16 lanes card) does noet refresh correctly. You can not see what iMovie is displaying for example, iMovie screen is white and does not display what should be on screen.
Sometimes none of the main screen is refresehd (example: Safari content is not updated, while in fact it is!) but the mousecursor moves correctlyon screen.
Also third party software (like FotoMagico) is not updated on screen
Connecting both displays to one card and everything is fine!
A strange bug wich I guess is related to the Mac Pro firmware
I've tried the second NVIDIA card in all the PCI-E slots to see if this makes a difference, it does not.
I used the PCI-E configure tool to vhange the speed of the lanes for the PCI-E slots, also this makes no diffrence.
At this moment my second card is not usable.
This is a problem on all three Mac Pro's we tried this on (2.66 version, 2 machines with 1Gb RAM, 1 machine with 3Gb RAM), latest OS 10.4.7
Starting in safe mode makes no difference on either Mac Pro

I am running two 7300 GTs in my 2.66 GHz Mac Pro driving (2) 20" + (1) 30" Cinema Display. I am not seeing the issue you mention in iMovie. Quicktime flickers every once in a while when playing iTunes video content, but that started with the iTunes / Quicktime upgrade, not when I added the extra card.
I have my nVidia 7300 cards in slots 1 &2 each running 8 lanes. Might be worth a try. The 7300 is not that "high performance" that running in 8 lanes is going to make a huge difference in speed. What it will do for you is get the cards on an equal footing.

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

Firmware bug: $CCERT must not be used in Report_Rule

Prolog
"Report Rule" can be configured with URL's used to save phone's current configuration. Starting with 7.5.2b firmware it is possible to configure more than one URL here. The semi-colon has been used as separator. It caused issues because semi-colon can be used in casual URL, so the separator has been changed to space in 7.5.5 (see Bug in Report_Rule parsing (SPA50x, fw 7.5.x) for more)
As of 7.5.7 firmware, the 2048 certificates has been introduced and value of $CCERT variable may contain text "Installed (2048 bits)". It cause other issue related to Report Rule parsing.
Issue & how to repeat
$CCERT can be used on "Report Rule" no longer because of wrong parsing order.
The author of firmware first call variable expansion for complete "Report Rule" string, then split the result by space in attempt to found second URL.
With Report Rule configured to https://test.local/Report.php?Product=$PN&CERT=$CCERT it is parsed to:
first_rule is https://test.local/Cisco/Report.php?Product=SPA508G&CERT=Installed, second_rule is (2048 bits)
It is wrong result. In advance, it reveal the characters inserted into URL by variable expansion are not escaped properly.
How to fix
The order of parsing steps needs to be reversed. Report Rule need to be split into parts first, then variable expansion should be called for both parts independently. Also, strings expanded from variables should be url-encoded properly.
Disclaimer
I will not call SMB support to report this bug to them. Assuming the Cisco is interested to repair firmware bugs a staff member monitoring this forum will create ticked by self. I wish that all relevant information including the depth-in analysis has been disclosed here. I'm ready to provide further details or create test environment if necessary. I'm just not willing to call the Support center as I'm not willing to explain all those complex things described here by phone (and they doesn't accept written reports).
For those non-Cisco-staff users affected by issue - feel free to report the issue to Support center, if you are willing to do it. You are allowed to use information disclosed here, or just refer to this report. I don't care the authorship.

Post Author: CompositeID
CA Forum: .NET
You are not alone on this one, I am having the very same issue as you are and . Everything functioned just fine the last time the application was deployed was deployed and there was nothing changed to any of the reports or code which handles the reports; however, this time I am having the same issue. I added the parameters to the report to check to see if they were actually being recognized by the report and they do show up, but it refuses to filter the records and brings back every record. The report works properly if I run it just directly in Crystal though. I sure hope someone can enlighten us Paul.
Update: Well, I finally figured out what was causing my issue. The issue had to deal with the actual older version of the CrystalReportViewer control and the newer version supplied by the update. I had suspected it was something minor that I had overlooked when doing the update. Hope this gets you going as well. Cheers

Title Tool bug / Trying to use PPro in a professional setting

Create several titles, everything is fine, copy and paste the clips further down the timeline and when I try to revise the title it will not show the video behind the title, it either shows black or checkerboard. Even if I create new titles it won't show the video backround, BUT if I copy and paste everything in a new timeline it all works fine.
How can I view the title tool in my broadcast monitor through Aja 3G? How can I zoom in the canvas in the title tool when working with small disclaimer type?
How does the type size slider numbers relate to either scanlines or point sizes? Why are the values not the same as AE they're both adobe products?
Trying to use Premiere for mid-high end spot finish, multitude of the sorts of bugs making it difficult.

The problem stated below really burned me try to conform a series of national spots, had to run to final cut to get the job done.
m trying to work out an offline-online workflow strategy with PPro55. I have ALEXA PR4444 LogC files and corresponding externally-converted "edit proxies" (PR LT w/LUT & TC burn). I am editing with the "proxies" and then want to swap the files out for the full-res PR4444 camera files. File names, TC and reel numbers all match between the two sets of files.
I have attempted to use Project Manager to create a "trimmed, offline" project and then relink the clips to the camera originals. When I do this, the timeline clips all start at the start-point of each file and not the correct in-point. I presume this is a bug. Anyone else tried this with success? The same method works perfectly in FCP 7. Also in PPro55, if I export a CMX 3600 EDL and then import and relink the EDL, it also works properly. Thoughts?

Am trying to get my Ipad1 to work via AirPrint using Pages and a Canon MG8250 printer. My iMac works ok but the iPad attempt results in the printer trying to use the rear paper tray rather than the lower paper drawer. All drivers and firmware are latest

My set up is Imac + Ipad1 + canon MG8250 printer. Wireless network. airprint in use and functions fine with the Imac. The Ipad initiates printing ok but always faults out with the error 'Printer out of paper' because it tries to use the rear paper tray (special paper ) instead of the paper drawer.

Johnmac@47-
Could the iMac have printed something that required use of the rear tray? That might have reset the printer's default. Look in the printer manual to see if it has a setting to change the default paper tray. (Note that the iMac does not use AirPrint, it uses the printer's native printing language.)
Your problem may be a flaw in the Canon AirPrint implementation. I suggest you report it to Apple at <iPad Feedback>, as well as to Canon. There may be a simple correction that can be made to either the next iOS update or to the Canon printer firmware.
Fred

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an email with the serial number once the product was registered - But I never received this email. If anyone is able to help me with this issue - that would be great. the registration number is: PEPEP6-5578-6450-8871-9107 I am using a windows based system

If I were you I would first make sure CS6 was deactivated or signed-out. Then download Adobe's cleaner and remove cc, CS6 and any other creative application installed including Creative Cloud desktop application. Then install CS6 and use your CS6 serial number during the install to activate CS6 standard or extended which ever the serial number is for. CS6 Version 13.0 should the be activated. That level of CS6 is extremely bug ridden so be sure to the use CS6 menu Help>Updates to get CS6 updates. Windows should update to version 13.0.1.3 Mac to version 13.0.6. Not Subscription CS6 version 13.1.2...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I updated to ios8 and tried to use Health Application. In Sources I get a message that other applications will show up on the list as they request permission to update your data. How does it happen? No apps are listed on my Sources section

I updated to ios8 and tried to use Health Application. In Sources I get a message that other applications will show up on the list as they request permission to update your data. How does it happen? No apps are listed on my Sources section

I have an answer to my question. There is a bug in IOS8 that prevents third party applications to talk to the Health Application. Apple is trying to fix it ASAP

Some component with an unsupported version is trying to use NI Spy

This problem is intermittent. In GPIB Configuration, Network settings, when I select the IP address of GPIB ENET/100, I get this NI Spy message: Some component with an unsupported version is trying to use NI Spy. Please contact National Instruments for an update. Do I need to update the firmware of GPIB/ENET100? The current version is B.9.

Hello,
Try uninstalling 488.2 driver, then uninstall MAX and then reinstall the 2.1 version for 488.2 from CurrentGPIB driver versions. Also make sure you are the administrator while you uninstall and reinstall.
I have not seen this problem happen before so I hope uninstalling and reinstalling helps solve this problem.
Please feel free to email me back incase you have further questions.
Good luck and have a great day!
Koninika
National Instruments

RV082 RV042 RV042G v4 firmware bug?

Models affected: RV082 v3 (primarily) - also RV042 v3 and RV042G
Symptoms:
1) web admin GUI stops responding
2) internet speed slows or stops completely
Temporary Fix:
1) power-cycle the router, everything works fine for a random period of time
Notes:
1) happens after a month or so for RV082 that is giving me trouble.
2) seems to affect a large number of units but not all units
3) this has been going on for a YEAR OR MORE without resolution
4) also, I can only program this router with IE - for firefox, I can't get past the certificate warning and to the login prompt.
5) could this be related to https login and broken code regarding SSL certificate or its integration into the web GUI?
6) yes, I have reset the unit to factory defaults and reprogrammed
     yes, I have tried different firmware revisions
     yes, I am on the current firmware
     yes, I have re-issued the SSL certificate
Maybe the team writing the firmware could get their hands on some of the reported units with these issues and see how they behave, figure out what the real problem is so we can stop beating our heads against the wall?

What Samir said...
FWIW - here's what I've settled on:
RV042 v1 with the last v1 firmware. I have a couple clients with these. I want them to die but they won't, so they are still running fine. Some develop that squealing sound in the power supply section. Had one or two fail and upgraded to RV082
RV042 v3 (not sure which firmware) I had one client with this, NEVER had an issue
RV042G - never tried one, and I don't plan on it (maybe an RV320, although I prefer rackmountable units)
RV082 v1 with last v1 firmware (v2 firmware will break it) - several of my clients have these, and I use one at home. They just run and run and run, and occasionally one might need to have the CMOS battery replaced. I just configured one of these with a Dual-WAN and it works great. I prefer the v4 firmware UI that comes on the v3 units.
RV082 v2 = JUNK!!
RV082 v3 - firmware v4.1.1.01-sp is stable and has been running one of my clients for 2 years no issues. firmware v4.2.3.03 came loaded on a new one that was purchased in 2014 and that has also been running fine. The first gets heavy internet use with skype, audio streaming, websites. The latter has 9 VoIP phones (phonebooth) behind it and using bandwidth priority rules to share a 800kb upstream.
** v4 firmwares are unified across all v3 hardware (RV042, 82, 42G) - I only trust the two versions listed directly above. If you change/update to one of these firmwares to resolve issues, reset the router to defaults, flash the firmware, maybe reset it to defaults again just to be sure, and then program it from scratch. Save your config from the stable firmware and then you can use that to reload if you do more resetting later.
RECOMMENDATIONS:
** I love that the RV082 is rackmountable, has an internal PSU, and has an 8-port switch. It's only a few bucks more so just forget the RV042 and get the faster/better option.
** The RV325 is a compelling successor to the RV082. (basically an RV082 with Gigabit ports). It has better firewall throughput and processing, also has newer features for QoS and multiple DHCP on several vLANs. I picked up one last year to replace an RV082 but I figured out a solution before swapping the routers. I haven't been brave enough nor had enough time to give it a real test yet. Hoping to do so soon. It has external PSU which is not so great but I can deal with that - at least it's rackmountable.
(I have retracted my comment about the ISA series. I configured one running on early firmware and was impressed, but evidently they had issues and Cisco stopped making them after a relatively short run, which is a bad sign).

E55 Thread for Firmware Bugs

I noticed that there isn't yet a thread in order to report E55 firmware bugs, so I started this
Here the firmware bugs I've found:
- Hidden WLAN: when you search for wireless access points (for example from the main screen) the phone see always one "hidden wlan", that is not there!
- Default phone numbers: when you have more phone numbers for a contact, you can choose one of these as default for messaging or dialing, but even if you do that, E55 keep asking you what number to use every time you make a sms
- Organizer major bug: sometimes (80% of times!) when you edit a memo in Organizer, or when you move it (by changing the start date), you will see that also the end date has changed (adding 1 or more days), even if you didn't touch it! And even if the start and the end date originally matched! So if you had a memo covering one day, now it covers more days, and the end date can't be changed again (you set the correct date, save, and none happens). This make the memos totally unusable!
- Organizer minor bug: when you open Organizer, and then open a memo, you have to select the information that you want to modify (text, date, synch) and click one more time to edit the memo. But: if you select the "date" or the "synch" row, instead of the "text" row, and then click "modify", the memo is open alway with the cursor on the "text" row. So, the capability of selecting others rows, is pretty useless.
I hope some Nokia guy will notice this thread so there informations can be useful for a future firmware release, also because I'm getting crazy with the memos issue!!
Roberto
Moderator note: word 'official' removed from title, as this may mislead users to believe that the information presented comes from or is in some way endorsed by Nokia.
Message Edited by michaels on 05-Oct-2009 10:06 AM
Message Edited by michaels on 05-Oct-2009 03:31 PM
Roberto Dapino
http://www.stormvision.it/blog

hi olandesevolante
about ur first and second issues u face they r not realy bugs, why?
for the first one: i faced that with my E51 in a place i visited before, that hidden WLAN maybe a conflict from another type of waves other than that of wlan using same frequency
and about the second issue: default phone numbers is a feature that only set for making calls but when u make an sms the phone will ask u to choose between numbers present unders the same contact name even if u set a default number, so it is not a bug but that is the normal firmware properties
for the rest of issues , they sound like real bugs
i hope i helped a little and i wish those bugs will be removed in the next firmware
Message Edited by michaels on 05-Oct-2009 03:31 PM
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Firmware bug? No Connect/Disconnect button on "Manual" PPPoE option

Hi,
To the best of my knowledge this is a firmware bug.
There is no Connect/Disconnect option when choosing "Manual" from the PPPoE settings.
There are two related (unanswered) posts:
http://discussions.apple.com/thread.jspa?messageID=8166971&#8166971
http://discussions.apple.com/thread.jspa?messageID=8137893&#8137893
Is there an official way to report such a bug?
Does anybody have another solution?
Thanks,
Omri

I reported the bug and got this response:
This is a follow up to Bug ID# 6286922. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 5847755. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.

Firmware bug: CPU1 tried to use APIC500

Similar Messages

Maybe you are looking for