First Blog - Ready for Approval

I am not sure if this is the right forum for the below question.
Few days back I submitted my first blog on SDN for approval. Later I updated it few times and re-posted it with status "Ready for Approval". Does anyone know if I need to inform SDN that I revised my earlier post or will SDN automatically pick up the latest version of my blog?
Thanks.

SDN will pick up the latest version of the "ready" blog, but depending on the blog and the area it can take several days.
You might also get it back in "feedback" mode.
After a while it should go faster, particularly if the blogs are reliably good.
Cheers,
Julius

Similar Messages

Error: Lock profile for approval procedure not maintained in Customizing

Hi,
We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
Select an approval procedure first
Lock profile for approval procedure not maintained in Customizing
Approval procedure and approval steps are locked automatically
This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
Best Regards.

Hi Karthik,
Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval'
But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

My first built system for Premiere CS5. Need advice to approve hardware list.

Hi All:
After some research and reading some of the posts I have cane up with the hardware list I (think) I will need to built my first editing system for Premiere, Photoshop and AE CS5. I have came out so far with an estimate of around US$1500.00, without considering yet the hard drives. I do not if top wait a little bit until prices drop or just do it. I am not sure yet if I will start with an SSD for the OS and what type yet. I will figure it out later and ask your kind advice.
As I post my list I will note what options it would be recommended for a good system. I just have a basic acknowledge of computers and excuse me if I make any insane comments. I hace seen some videos and read some other users experiences and I am very confident I can built my very first system.
I am planning to start ordering some of the parts as soon as possible (like the case, BDR) and tdo the rest in the next days.
Thanks in advance!
COOLER MASTER HAF 932 Advanced Blue Edition RC-932-KKN3-GP Black Steel ATX Full Tower Computer Case with USB 3.0, Black Interior and Four Blue LED Fans-1x 230mm front fan, 1x 230mm top fan, 1x 230mm side fan, and 1x 140mm rear fan   $139.00 after rebates
Do I need additional fans?
ASUS P8Z68 DELUXE/GEN3 LGA 1155 Intel Z68 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS   $269.99
Which one should I choose? Is it worth paying an extra $50.00 for the 2700k?
Intel Core i7-2700K Sandy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623i72700K   $369.99
Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623I72600K    $319.99
Should I consider this?
COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long Life Sleeve 120mm CPU Cooler Compatible Intel Core i5 & Intel Core i7   $29.99
Should I consider this?
Arctic Silver 5 Thermal Compound    $12.98
Is 16Gb good enoughRam? Is G.SKILL a reliable brand? I have seen others choosing Crucial brands and going 3x4Gb (total of 12Gb). Any thoughts?
G.SKILL Ripjaws X Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL11Q-16GBXL   $139.99
Which one? Is it worth to pay an extra $60.00 for the GTX570 2560mb?
EVGA 012-P3-1571-KR GeForce GTX 570 HD w/Display-Port (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card   $339.99
EVGA 025-P3-1579-AR GeForce GTX 570 (Fermi) HD 2560MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card    $399.99
Which one oh these Cooler Master?
COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W Power Supply $139.99 after rebates
COOLER MASTER Silent Pro Hybrid RS-850-SPHA-D3 850W Power Supply $199.99
I am already using one of these and I am happy with it. I am planning to have 2 installed in the system.
LITE-ON Black 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 8X BD-ROM 8MB Cache SATA 12X Blu-ray Burner with Blu-ray 3D feature IHBS112-29 - OEM    $99.99

Here are some links I've saved that talk about Win7 setup
Registry Cleaners http://windowssecrets.com/newsletter/putting-registry-system-cleanup-apps-to-the-test/
Be sure you have the default hard drive indexing OFF for all drives and folders!!!
http://www.pcworld.com/businesscenter/article/220753/windows_7_godmode_tips_tricks_tweaks. html
Temp/Cookie Cleaner http://www.mixesoft.com/
http://forums.adobe.com/thread/789809
Win7 Toolbar http://WindowsSecrets.com/comp/110210
More Win7 Tips http://windowssecrets.com/comp/110127
Utilities http://windowssecrets.com/comp/110106 (Startup Solutions)
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255
CS5 Install Error http://forums.adobe.com/thread/629281
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
Harm's Tools http://forums.adobe.com/thread/504907
Also http://www.tune-up.com/products/tuneup-utilities/
Also http://personal.inet.fi/business/toniarts/ecleane.htm
Optimizing Hard Drive http://www.video2brain.com/en/videos-5353.htm
Win7 Reinstall http://windowssecrets.com/newsletter/win7s-no-reformat-nondestructive-reinstall/
Anti-Malware Tools http://windowssecrets.com/newsletter/the-advanced-system-recover-toolkit/
Free Optimizer http://www.iobit.com/advancedsystemcareper.html
Repair AVI http://forums.adobe.com/thread/888268
Tune Vista & Win7 64bit http://forums.adobe.com/thread/436139

How we create workflow using sharepoint designer for first review the documnet than go for approve the document.

Hi to all
I have team site in site collection under this i have Shared Document library. Now i want to create the workflow for the shared Document library. How i will create workflow using sharepoint designer for first review the documnet than go for approve
the document.

Hi ,
According to your description, my understanding is that you want to create a workflow which contains review and approval process.
For implemening your requirement, you can create a workflow containing two steps. The first step is used to collect user information and set workflow variables, and the second step is used to verify whether the reviewer approve. If the reviewers complete
approving, a pproval workflow is started. The whole workflow is like :
More information, please refer to the links below:
http://www.documentmanagementworkflowinfo.com/sharepoint-video-tutorials/create-document-review-workflow-sharepoint-designer-2007.htm
http://office.microsoft.com/en-us/sharepoint-designer-help/watch-this-design-a-document-review-workflow-solution-HA010256417.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Ready for resale First Generation iPad delete calendars and iBooks on device after saving in iTunes

Ready for resale First Generation iPad. Need to delete calendars and iBooks on iPad. Downloaded all info in iTunes. If I delete iBooks on the iPad only will it also delete all info in iTunes iBook purchases and downloads. I have backed up my calendars in MacBookPro. Please advise.

To wipe clean you have 2 options
1: Connect and select iPad in computer iTunes, in Summary tab, click Restore button.
2. iPad's Settings > General > Reset > Rest All Content and Settings.

Application Loader error, how to submit app for approval

Firstly, here's my info:
1) App is for iPad and iPhone/iPod Touch
2) Build using Flash CS 5 (Windows), packaged using Air 2.6 using ADT.
3) Successfully build and tested my .ipa file.
4) I just got a Mac OSX (I'm new to Mac) for submitting to Apple for approval.
When I submit my app using the Application Loader:
Error is: "Application failed codesign verification. The signature was invalid, or it was not signed with an Apple submission cartificate"
(read that I need to rename my .ipa to .zip and submit that, but it still gave the error)
Forgive me if this has been answered before, but it's bits and pieces of tips all over.
And I don't understand why I need to manually hack files when Adobe claims Flash can develope apps for iOS.
- ok, yes Flash can develope iOS apps, but with that statement, don't we all presume we can also submit it to the App store?
I've spent months optimizing the app from PFI builds to now using AIR 2.6.
Bought all the devices to test on. Now that I'm ready to submit it to Apple, I'm hitting the wall again.
I've gone through lots of tips but none works for me.
Can someone give step by step instructions?
Thanks,
-alfred

Ok, it was sweet while it lasted
Apple sent an email:
"Invalid Signature - Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose "Clean All" in Xcode, delete the "build" directory in the Finder, and rebuild your release target."
I'm sure I used the Distribution certs.
Since I'm using Flash and not Xcode, what are the possible problems?
I used adt -package -target ipa-app-store ....
-alfred

Is Nokia ready for high end market?

It is the time of smartphones. With the introduction of 3G, distance and speed are not a barrier at all. Prediction is that, we will see a shift from laptop to smartphones, something we experienced a few years ago when laptop replaced desktops. So, is Nokia really ready for this competitve market? I believe they are still not ready looking at the way they support N series and E series.
My horror story started the day I purchased my N96, exactly 4 months back. I have been watching the developments of N95 and wanted to own one. Nokia released N96 by the time I made my decision. The problem started when I started seeing low memory errors. To my surprise, I noticed that Nokia uses phone memory for messages and N-gauge. Configuring "mass memory" as the storage for messages didn't solve the problem completely as it failed to move all messagesI searched for some file explorer kind of applications to explore and clean phone memory. I wish if Nokia had one. The solution given to me by Nokia support was to reset the phone. And, that cleared all data from my phone. So, here are a list of my pain points
- Does Nokia expect us to reset phone for every small issues. Note that, these are not just phones, but smart phones. More than contacts, I have my personal data, bookmarks, configurations, rss feeds, video feeds, radio stations, podcasts, GPS locations, blogging tools, applications etc. installed. Getting back the phone in the same state will take days after a hard reset. Do I agree if my laptop service center tells me that they have to format my harddisk everytime I take my laptop for servicing? Nokia Care's standard answer is to update the firmware (though I have the latest firmware) and reset the phone for any issues. I only wish if Nokia trained their technicians to handle smartphones.
- N96 reboots when I use GPS 50% of the times (when you use it for longer duration either with google map or Nokia map or sports tracker)
- Phone hangs when you move from wifi hotspot to other places while wifi scan is going on (I don't see this issue after upgrading to 12.043)
- There is no way to restart the phone when the phone hangs. You have to take out the battery and put it back.
- I get disconnected frequently when I'm on long calls. Though I can blame my network provider, I know its not completely because of them. My N70 doesn't have this problem.
- I have been having a long battle with Nokia support and bluetooth issues. I tried to use Motorola HT820 headset with this phone. Phone hangs or reboots 90% time when I turn on the headset. Nokia's standard answer is that Motorola HT820 is not a supported accessory. I agree, but is it acceptable if phone reboots or hangs when I tried to use an unsupported accessory? Only way to reboot the phone when it hangs is to remove the battery and place it back. Why can't they give a reset switch hidden somewhere if they can't write bugfree code (and nonone can). I have been doing this for the last one month while trying to convince Nokia that they have a problem with their bluetooth stack. I can prove that it happens only with A2DP profile. I have been using a plantronics bluetooth headset without any problem. I'm also using HT820 with my Nokia N70 which supports only HSP profile. Unfortunately, N96 doesn't provide an option to choose what profile you want to use when you pair a bluetooth headset. I could have listened to music from my laptop (A2DP) while the headset is connected with phone (HSP), and I don't miss any calls. I'm pretty sure it is a bug in their bluetooth stack; only if I could talk to one of their developers and explain the problem.
- You know the commotion Nokia created when they removed VoIP stack from N96. Thanks to Fring, I use VoIP and skype with N96 today.
- The NetWork stack is so cumbursome. Each applications have to define their own access points and rights. Why can't it be in the platform level? Just imagin you doing this on your laptop for each of the applications.
- Its better not to talk about the battery. It comes for less than a day for me. But, you can always blaim the usage.
How do we make Nokia listen to issues? Do they have any customer feedback forum (please, not through the Nokia Care centers)? I wish if they improve, after all, I still love my phone (Yes, I paid a good amount for this phone)
--jaimon
N96, FW: 12.043

Hi Jaimon,
I'm with you - I've had my N96 nearly six months and am VERY disappointed.
I just bought a Parrot Party Bluetooth speaker. A GREAT little unit. Needless to say, the implementation of A2DP leaves a LOT to be desired on the N96. Basically, it's like listening to a CD that skips every 10 seconds. The N96 cannot keep up the stream of data fast enough. It's VERY annoying.
I checked to make sure no other apps were running to make sure it wasn't something else running that was causing the problem, but no, it's rubbish (I have firmware 12.043). Other people in my office can connect their Blackberries etc... no problem. Plays back beautifully, but my N96? Piece of garbage.
Nokia have a LOT to answer for! Like you say, a phone that costs more than a laptop and this is the level of service we get. I have written TWICE via their online customer service form, and on each occasion received an email saying I can expect a response in 72 hours. I've never received ANYTHING!
Also, I had a Plantronics headset - Explorer 340. A nice headset. Same problems as mentioned elsewhere, would intermittently be disconnected and reconnected - very annoying. Last week, it paired but would not connect. Plantronics' support was wonderful! So efficient. They're exchanging the unit with a newer model (brand new) because they cannot replace the old model. Maybe that will work better. Meanwhile, because I NEED a headset for driving (and the supplied stereo headset is pathetic - cable too short, microphone ends up around your waist (USELESS!)) I bought (*gasp*) a Nokia BH-101. Paired fine with the N96 (as one would EXPECT), but the headset itself is lousy - such a poor design. I challenge anyone to make it fit in their ear comfortably enough as to be able to HEAR the bloody thing while driving. I have to keep one hand on it to keep it in my ear. USELESS NOKIA!
What is it WITH this company?! Why have they lost the plot?!??!
Ian Nicholson
Poor Sod/N96 Owner
Nokia: Connecting People... with iPhones.

PO creation for approved requisitions

Hi Gurus,
can anybody please throw some light and help me with this scenario. We have release procedure setup for requsitions for cost centers only. The approval levels we have are 1000-5000 is level1, 5001-10000 is level2 and 10001+ is level3. If a user puts in a requisition for 4000 USD, it goes for approval to person A. once it is approved this is ready to be convertted to PO. Now at this POint the buyer has teh capability to cut the PO against any amount higher than 4000 which was originally put on the requisition. Now my question here is since the requisition has been aprroved for 4000 USD which is in the limit of 1000 -5000, it is OK for us if the buyer goes ahead and creates a PO for 5000. But we dont want the buyer to create a PO for next limits like 5001 and above as the requsition was approved for only the limit range of 1000-5000. Similarly the buyer can create the PO for a lesser dollar amount also than 4000. These chaanges occur because by the time the PO is created the rrates might change in the real world. Can anybody please let me knwo if there is a way to put a hard error in PO creation if the buyer tries to create thee PO for an amount outside of the approved limit on the requisition.
Thanks
Anusha

Technically what Jurgen said, plus . . .
From a pure business point of view the PR is for business approval of a potential expenditure, value as indicated on the PR. That is business approval only.
The PO is the commercial aspect where the purchasing dept. take the PR and convert it to a PO, at the best cost they can for the requirement.
The person who created the PR puts an indicative value, the buyer who coverts it to a PO puts a definitive value, do you really want to go through the PR release loop every time market conditions dictate otherwise (or at least put a tolerance on it).
Regards,
Nick

Apps no longer found on App Store - despite long been "Ready for Sale"

As discovered yesterday, all our paid apps have been "lost" from the iOS App Store.
An alert saying:
"Your request could not be completed. The item you've requested is not currently available in the US store."
...appears instead.
Nowhere are they to be found, either by navigating directly to their urls in a browser, or by searching via iTunes on computer, iPhone or iPad.
Not even when clicking the link from within:
[ my developers account > iTunes Connect > Manage your account > [particular app] > View in app store ]
...will they appear, despite them being marked as "Ready for Sale".
This has been confirmed for the Swedish and US app stores so far, on different computers/locations.
All these apps were approved between mid 2009 and mid 2010, and all have long had (and still have) the status "Ready for Sale" and are distributed worldwide.
At the same time, only our FREE-apps are still to be found on the App Store.
I've submitted a report to their support, but receiving a reply could take a while and in the meantime I'm loosing income.
Does anybody know what's going on?
Is this happening for others, or is it just our apps? Has this happened to others before?
Thanks.

Yes, apparently all of a sudden my previously active iOS-contract has been placed under "Request Contracts" instead of in "Contracts In Effect".
When there's a change in contracts you'll always get a notification from Apple is my experience, but now nothing.
My iAD and Free-contracts are still in effect, though.
Could it be connection with having just paid the Mac OS X-developer fee? I strictly remember having ADDED this to my existing account, not creating a new one.
So should I request a new contract, with all the hassle of having to send them the w8ben-form etc (taking forever)? Or is it a shorter process since I've been a registered developer for more than 2 years?
Eh, I'll go ahead and click the "Request"-button for the iOS contract. If you have any more input I'll gladly hear it.

Firefox beta 35 not ready for prime time.

I have spent the entire weekend trying to get the Firefox beta 35 to work. What I have found is that *all* extensions fail to work with the exception of Places Maintenance. I can not download any extension Firefox is so famous for. The error is something like "cannot install 'plugin-name' in it's current state." Enabling any extension require a FF restart, even Places Maintenance. Trying to remove an extension fails and must be done manually.
I am on Windows 7 Premium desktop Firefox, 32 bit. I "committed" myself to FF 35 last night (which meant clearing history and cache on exit because the extension "Expire History by Days" was no longer working), when I discovered that 35 was not playing nice with some sites using Flash. It was a capricious thing. Many sites worked as normal but some would not render at all. Examples:
http://www.wunderground.com/US/WI/La_Crosse.html
http://www.weather.com/weather/5day/l/Hustler+WI+54637:4:US
First time I have has a problem with a Firefox beta, but it is definitely not ready for prime time. I realize FF is attempting to get away from what we are calling "Proprietary add-ons" but FF 35 in its present state will just fill the Moz Support forums with millions of complaints (guess I am one of the first). I have at present 1 extension (the only one that works on 35), the above mentioned "Places Maintenance."
I thought you might like this report as "user input." God knows I have tried...I must have downloaded 35 at least a dozen times and then been forced back to 34.0.5. So I am back on 34.0.5
I have submitted a bug report here:
https://bugzilla.mozilla.org/show_bug.cgi?id=1108196
Let me know if anyone else is having these problems or anyone needs more information. I'd love to help fix this. I know some of you good support people have probably tried 35. Are you having the same difficulties?
Below is my (34.0.5 but the same as I had on 35 last night with the exception of "Version") trouble shooting information minus a million entries for my printer:
Application Basics
Name: Firefox
Version: 34.0.5
User Agent: Mozilla/5.0 (Windows NT 6.1; rv:34.0) Gecko/20100101 Firefox/34.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Places Maintenance
Version: 1.3
Enabled: false
ID: [email protected]
Graphics
Adapter Description: NVIDIA GeForce 9400 GT
Adapter Drivers: nvd3dum nvwgf2um,nvwgf2um
Adapter RAM: 1024
ClearType Parameters: Gamma: 2200 Pixel Structure: B ClearType Level: 50 Enhanced Contrast: 300
Device ID: 0x0641
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 12-19-2013
Driver Version: 9.18.13.3221
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 304619da
Vendor ID: 0x10de
WebGL Renderer: Google Inc. -- ANGLE (NVIDIA GeForce 9400 GT Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.search.suggest.enabled: false
browser.search.useDBForOrder: true
browser.sessionstore.enabled: false
browser.sessionstore.max_tabs_undo: 0
browser.sessionstore.upgradeBackup.latestBuildID: 20141126041045
browser.startup.homepage: http://www.wcwcw.com/
browser.startup.homepage_override.buildID: 20141126041045
browser.startup.homepage_override.mstone: 34.0.5
browser.tabs.loadInBackground: false
browser.urlbar.autocomplete.enabled: false
dom.indexedDB.enabled: false
dom.mozApps.used: true
dom.w3c_touch_events.expose: false
extensions.lastAppVersion: 34.0.5
font.internaluseonly.changed: false
general.autoScroll: false
gfx.direct3d.last_used_feature_level_idx: 1
keyword.URL: https://www.google.com/search?q=
media.gmp-gmpopenh264.lastUpdate: 1413301734
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1417991594
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1418059778
places.history.expiration.transient_current_max_pages: 80511
plugin.disable_full_page_plugin_for_types: application/vnd.fdf,application/vnd.adobe.xdp+xml,application/vnd.adobe.xfdf,application/pdf
plugin.importedState: true
plugin.state.np32dsw: 1
plugin.state.npdeployjava: 0
plugin.state.npgoogleupdate: 0
plugin.state.nppdf: 2
plugin.state.npwatweb: 2
privacy.clearOnShutdown.cookies: false
privacy.clearOnShutdown.formdata: false
privacy.clearOnShutdown.offlineApps: true
privacy.clearOnShutdown.sessions: false
privacy.cpd.cache: false
privacy.cpd.cookies: false
privacy.cpd.offlineApps: true
privacy.cpd.sessions: false
privacy.popups.showBrowserMessage: false
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
privacy.sanitize.timeSpan: 0
security.disable_button.openCertManager: false
security.disable_button.openDeviceManager: false
security.warn_viewing_mixed: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1415513129
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSMIME
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSSL
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSUTIL
Expected minimum version: 3.17.2
Version in use: 3.17.2
Experimental Features
---------------------

Just for the record I'm using Fx35b1 with lots of plug-ins and extensions with absolutely no problems now or for quite a long time.

Smash Bros Preorder Bundle Not Available In Spite of Email Saying it Was Ready for Pick Up

I had preordered ({removed per Forum Guidelines}) the Wii U Smash Bros Bundle (SKU: 7493005) on 8/4/14 at bestbuy.com utilized the pick up in store option (may be the last time I do that). When I went to the Middletown (461), NY store to pick it up yesterday before 3pm. I did not anticipate any issues since I received an email saying that my order was ready for pick up and have never had a problem when I have gotten such an email.
When I arrived at the store, I had to wait for someone to finish with another customer. The associate attempted to find my game, but it was not at the customer service desk. She had another employee look elsewhere, but I had to leave. The and the game was not found. I had to leave to pick up my daughter from school, so she took my name and number down. About 10 minutes later I got a call telling me that the store oversold its preorders and there was a system error. I was told that it would be in sometime in the next week.
After getting my daughter, I went back to the store because I could not understand how this happened. This time, I was helped by Brittany. The game was still not there and I was given the same explanation. I asked how preorders were filled because I had preordered in August and it just seems strange that I would get an email telling me that the product was there when it was not. Based upon what others have written that they were told, it seems that online preorders should have been satisified first since they are paid in full.
Brittany was quite helpful and called the Monroe, NY (1394) store to see if they had a physical copy since the computer system said they did. Whoever she spoke with in Monroe confirmed that they had a physical copy and Brittany asked that it be held at the in store pick up desk. She then transferred the store pick up over and I drove to Monroe with my family in tow.
When I got to Monroe, I had not gotten an email confirming that the pick up was ready, but I went to the desk anyway to explain the situation. Victor looked around and did not see it. A shift leader/manager came over to assist, but there was no physical copy. I was understandably upset. The shift leader/manager called around to other stores to locate a physical, but to no avail.
After waiting nearly 30 minutes, I came up with another "solution" because my family was on the brink of a meltdown give that it was after 5:00 pm. So, I got a copy of the game and the gamecube controller, which are 2 of the 3 parts of the bundle that I ordered. The only missing component was the controller adapter ($19.99), but since that was available in stock online at Best Buy.com I figured that I would get that in a couple of days.
So, being that I am in the Gamers Club Unlocked, I get 20% off new games. The Bundle is $99.99, so I got it for $79.99 before tax. But if I buy the components parts, I would only get a discount on the game and not the controller and adapter because the discount does not apply to hardware. The shift leader/manager agreed to give me the appropriate discounts so that my total cost when I purchase the $19.99 adapter would not exceed $79.99 pretax. So, while I was made "whole," I really wasn't because I did not have the entire bundle and I wasted at least two hours of my life.
So, after leaving the store I promptly place on order ({removed per Forum Guidelines}) for the adapter on my smartphone. It says that it should ship so that I would get it by 11/26. No problem right? Wrong, because I get a subsequent email saying that it is backordered and that I can expect it sometime between 12/5 and 12/17.
So, I would like some type of compensation for my trouble. I would be happy with a $25 gift card. I should not have to deal with this type of issue, especially when I place a preorder so far in advance and spend several thousand dollars a year in your store.
1. How can you oversell a preorder? That is like overselling movie theater tickets. It is an unacceptable business practice.
2. How can an employee identify an item in stock in another store, confirm its existence, and then it not be there? Thankfully, I only had to drive 20 minutes back and forth, but it was 40 minutes that I did not have to drive.
The only positive in the whole thing was that the shift leader/manager in Monroe was so understanding. But even there, I had to come up with that idea.
I would appreciate a response and at least the above compensation.
Thank you.
Sincerely,
Darrell {removed per Forum Guidelines}

Hello darrell521,
I can’t thank you enough for the amount of detail you’ve provided in your post! Our in-store pickup process should be very streamlined for our customers who pre-order games at Best Buy and what you’ve described with your Super Smash Bros pre-order is quite the opposite. I sincerely apologize for the effort you had to put into redeeming the items needed to recreate the bundle, especially since you should have simply been provided your original copy upon your first arrival to our store!
In reviewing your BestBuy.com order for the adapter, I see that it actually did ship and I believe you’ve already received it! I’m happy to know that it’s very possible you’ve been able to play Super Smash Bros the way you originally intended. With that, I’m going to send you a private message with further information in regards to your purchases. Keep an eye on your inbox, which is located to the top right of your screen when logged into the forums.
Thanks for sharing your feedback with us on the forums and you’ll be hearing from me soon.
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Calling the Adobe form in a workflow step for Approval

Hi All,
We are creating a PCR scenario using Adobe forms for "Employee seperation". This form will require 7 subsequent approvals from various agents which is to be handled using a workflow.
I had gone through the ISR cookbook and managed to create a scenario. I have also assigned it to a PDF form and a dummy workflow. Now from my PCR iview i am able to submit the form for my scenario which also triggers the dummy workflow(through the BUS7051-CREATED event).
Right now this dummy workflow just sends a mail(by sendmail step) to the first approver. Now i want this workflow to send a workitem to the first approver for approval of this form which will have to appear in his UWL. When the approver double clicks on the workitem in UWL he should be able to view the form along with Approve/Reject/Cancel buttons. I am not aware how to do this. My questions are,
<b>Is this handled by a decision step or an activity?
If it is an activity step which Task/Business object method is used to handle this?
If it is a decision step how do we make the Adobe form also to be displayed along with approve/Reject buttons?</b>
We are using ECC5.0 and EP6.0.
Thanks in advance for any help.
Prasath N

Hi Rajasekhar,
The UWL issue has been resolved now and i am receiving the workitems in my UWL. But i am getting the following error when i am trying to execute the workitem from my UWL.
<b>Service cannot be reached
What has happened?
URL http://xxxxxxxx.xxxx.xxx.xxx:8000/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrFormApprove call was terminated because the corresponding service is not available.
Note
The termination occurred in system xxx with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:DALSPHSB_HSB_37-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
</b>
I have done the following configuration settings in SWFVISU transaction :
Task : TS500000075
Visualization Type : WebDynpro Java
visualization parameter: Application
visualization Value: IsrFormApprove
visualization parameter: Package
visualization Value: sap.com/pcui_gp~isr
Is there anything else that i have missed out in the configuration?
Message was edited by:
prasath natesan
Message was edited by:
prasath natesan

IPhoto 6 Not ready for primetime

I've had it with iPhoto 6!
The program seems to have been released before it was ready. . . I've had numerous problems that have caused me to lose work and have made my entire system seem unstable (hello spinning beach ball!).
The first problems occurred after a crash while making a calendar (something numerous other users have also experienced). All photos in my library taken over the past year disappeared. Although they were still in the iPhoto pictures folder, nothing could bring them back into the library. I tried rebuilding and everything else suggested on these boards.
I finally had to go to a backup and bring back my iPhoto 5 library. I reimported everything (after verifying the library and permissions) and thought that would cure the problems. But I was wrong.
After working for a two days on a photobook (I wouldn't dare try a calendar again). I opened iPhoto this morning and was prompted to rebuild my thumbnails as they needed to be "upgraded" to the new version. I declined. Afterwards, I had no photos in my library and my new book as well as two created in iPhoto 5 had also disappeared.
Yes, the photos themselves are still present in the Originals and Modified folders in the iPhoto library. I haven't lost them and could just recreate the library (if I trusted the program enough to spend the time doing so).
More importantly, I'm almost sure that I've lost my books (does anyone know where they might be stored or how to recover them?). I quit normally from the program last night after working on the book. Thankfully, I had created a .pdf file of it beforehand, so I can look at it.
Its just too much work to chase after a buggy, buggy, unstable program. I'm going back to iPhoto 5 and would advise others to do so, too -- at least until Apple fixes its mess.
Chris

I've had it with iPhoto 6!
The program seems to have been released before it was
ready. . . I've had numerous problems that have
caused me to lose work and have made my entire system
seem unstable (hello spinning beach ball!).
The first problems occurred after a crash while
making a calendar (something numerous other users
have also experienced). All photos in my library
taken over the past year disappeared. Although they
were still in the iPhoto pictures folder, nothing
could bring them back into the library. I tried
rebuilding and everything else suggested on these
boards.
I finally had to go to a backup and bring back my
iPhoto 5 library. I reimported everything (after
verifying the library and permissions) and thought
that would cure the problems. But I was wrong.
After working for a two days on a photobook (I
wouldn't dare try a calendar again). I opened iPhoto
this morning and was prompted to rebuild my
thumbnails as they needed to be "upgraded" to the new
version. I declined. Afterwards, I had no photos in
my library and my new book as well as two created in
iPhoto 5 had also disappeared.
Yes, the photos themselves are still present in the
Originals and Modified folders in the iPhoto library.
I haven't lost them and could just recreate the
library (if I trusted the program enough to spend the
time doing so).
More importantly, I'm almost sure that I've lost my
books (does anyone know where they might be stored or
how to recover them?). I quit normally from the
program last night after working on the book.
Thankfully, I had created a .pdf file of it
beforehand, so I can look at it.
Its just too much work to chase after a buggy, buggy,
unstable program. I'm going back to iPhoto 5 and
would advise others to do so, too -- at least until
Apple fixes its mess.
Chris
Primetime? IMHO it's not even ready for naptime! How such an immature program ever got out of the crate is beyond me. I installed and ended up with only one photo of about 300 visible. I messed and messed, re-loaded my backup folder and on and on. Had up to quadruplicates...deletede xtras etc.
Then, when I scrolled up, the photos would disappear as I moved the cursor...shutdown and restart resulted in about 50 percent of photos visible. Nothing like making an 8x10 of a grayed-out exclamation point with a title..:~}
I'm gonna return it and wait...iPhoto5 please come back.
rb

Expense_status_code – Ready for Payment - Yet its already in Financials..!?

To whom...
An expense report that is 'Ready for Payment' is also in ORACLE Financials..?!?!?
We have an issue with an expense report that has an expense_status_code of 'Ready for Payment' in the AP_EXPENSE_REPORT_HEADERS_all table.
The thing is, it has already been imported into ORACLE Financials and exists in the ap_invoices_all tabgle and can be seen within Invoice Overview from Payables module.
Under what curcumstances would/could this happen?
What can I do with it in i-expenses?
I'm not sure its related, but the 'Audit Reason' given is down as 'Unapplied Advance'.
Thanks for looking..
Steven

The solution was due to an Administrator who put the IEXP in on the 27/1 BUT the date of the claim was 30/9 and because an Auditor runs the import from the 1/10 (as that's when IEXPS went live) so any ER's that are put in before that date will not be picked up until the Auditor does the AUTO APPROVAL Process at the end of every month. These are then validated and ready to pay the following month.
So it seems, irrespective if they're in ORACLE Financials or not, if they're still as status 'Ready for Payment' they haven't yet been paid - although the Advance payment is probablies the reason why..
Steven

Attachments to be enabled for approver as well.

Hello Colleagues,
As per one of our prospect in India, they would like to have attachment section/block to be enabled for an approver as well.
The scenario goes this way,
Once an employee creates a trip request, it goes to a travel desk (first level of approval). Travel desk would find different quotations and needs to send these quotations along with the trip request to the respective manager (second level of approval). Currently, the approver cannot attach any files and hence, in this case travel desk cannot attach quotations to the trip request and send to the manager for further approval.
Can we enable attachment section for approver as well? Or could there be any work around?
Kindly assist.
Thank You!
Best Regards,
Divya

Dear Divya,
As of now development has no configuration to make the UI editable right now.
I recommend you to place this requirement in Ideaplace.
Thanks & Regards,
Manasa

First Blog - Ready for Approval

Similar Messages

Maybe you are looking for