Fixed area in a/r invoice

I have to make an A/R invoice.
It's possible to assign a fixed heigth to a repetitive area?
Thanks

Give me your Email Id, so that I shall mail you the document or
Send a test message to me at rohithasri (at) gmail

Similar Messages

  • Fixed Freight/Transportation charges per invoice

    Hello all,
    Scenario:
    We procure sheet metal for our fabrication plant.
    The vendor charges a fixed amount of freight per invoice/shipment regardless of the quantity of the items or the number of different items.
    Is it possible to have a fixed delivery charge per invoice - not related to the number of items or their quantities.
    Thank you.
    S Datar

    Hi,
    the fixed charge per PO is set on the PO header conditions using a condition type that does not depend on the qty involved.
    But the normal way for the costs to be managed (both on the PO and in MIRO) is to spread the costs across the lines of the invoice.
    You could always consider just posing an extra PO line for these costs?
    You can also set the system to use a gl for the unplanned delivery costs in MIRO instead of spreading them across the PO lines. (SPRO - MM > Logistics Invoice Verification > Incoming Invoice > Configure how unplanned delivery costs are processed. Just set the flag to a 2 on the company code you are using and the costs don't get spread anymore, they just get posted as an extra GL line.
    Steve B

  • I rented and downloaded two movies from iTunes via my iPad. They show up as purchased in items but won't play. They do not show up in iPad visor app at all. Any ideas on what happened and how to fix are welcome. Thanks

    I rented two movies from iTunes using my iPad. They show us as purchased but will not run from there. I get a message saying I have 24hours to watch then it just goes back to iTunes. I looked in video app where they usually go and nothing is there. Any ideas for a fix are welcome?
    Thanks

    You did try tapping on one of them in that list in the iPod app! This has happened to me and I was able to start the movie from there. You could try restarting the iPad, go into the iPod app and try again.
    Now I'm stumped unless it is a corrupt download. You did download right onto the iPad - correct? If you downloaded in iTunes, there is a Move tab or function that you have to select to transfer the movies to the iPad when you sync. They just don't sync over without selecting move.

  • Prices are not coming in invoice

    Dear Friends,
                     When i prepare a sales order than prices are coming, but during invoice preparation prices are not coming for particulary 2 materials only.Please help.
    Regard.s,
    Abhijeet

    Dear Friends,
                    Thanks for your reply. In copy control from delievery to billing,settings are as follows,
             Pricing type:- G
             Coping requirement:-004
             Data VBRK/VBRP:-007
      Users enter prices manually when they prepare sales order.Condition category is empty in condition type.
      Looking forward for your reply.
    Regard,s
    Abhijeet

  • Condition records are not showing in Invoice

    Hi Experts,
    My List price for XXXX material is amount $$$$$. Condition records having required validity.
    But the values are not showing in invoice though the pricing analysis shows green for this condition type.
    Condition values shown perfectly in preceeding documents.
    Analysis message says " Condition record exists but has not been set "
    Can you please suggest me, why this condition values are not shown in net value and suggest me the fis.
    Thank you in advance.
    Edited by: Ganesh B on Feb 4, 2010 4:45 AM

    Hi,
    Goto the T. Code "VF03".
    Enter your billing document number.Enter.Check what is the pricing procedure determined here.Goto the T.Code "V/08".Check whether that condition type present in that procedure.
    If so check the validity of the condition records.Ensure it falls under your billing document date.Also ensure that it is not marked for deletion.For this goto the last column in the condition record screen "VK12 T.Code".Ensure that this check box is not ticked.
    And you are telling that you are able get this one in previous documents.
    Goto the T.Code "VTFA(if your scenario is order related billing)" else goto the T.Code "VTFL(If your scenario is delivery-related billing)".
    Select your valid combination.Double click on item.Select your item category.Details.
    Make the Pricing type as "D" and pricing source as "blank".
    Regards,
    Krishna.

  • Business area wrongly posted for invoice

    Hi All,
    Business area wrongly posted for invoice.
    The user was posted the invoice with two line items one with posting key 40 for debit and one is 31 for credit vendor, these two line items are posted with different business areas.  and the the invoice is cleared also.
    Could any one please suggest what the above issue affects the business.  what would be the resolution to be done for this.
    Thanks in advance
    Nandha

    Hi All,
    The balances are not matching in fbl3n and fs10n, Due to the above wrong document posted and cleared also.  what is the better way to match the two balances (fbl3n and fs10n).
    Can i reverse the cleared wrong document and reset it in fbra,  if i do this is there any problems occur in production.
    please suggest to tally the balances of fbl3n and fs10n.
    one more thing if i double click on the fs10n the another screen will open in the the total balances are matching in fbl3n and fs10n.
    Please any suggest me to come out of this issue
    Thanks in advance
    Nandha

  • How can I fetch the deliveries which are PGIed but not invoiced.

    Hi
    I want to search for the deliveries for which post goods issue has been done but are not invoiced.
    Kindly guide with you valuable comments.
    Regards,
    Satish.

    Hi,
    Use the T.Code:VF04.
    Goto T.Code:VF04
    Enter the Sold-to-party.
    Select Delivery related tick mark and uncheck all.
    Execute.
    It will give all the deliveries which are PGIed but not invoice.
    Regards,
    Krishna.

  • RE:Planning dates are coming earlier to Invoice dates

    Dear All,
    i Have one problem Planning dates are coming earlier to Invoice dates.
    In some cases our Invoice date is 19.02.2010 but planning date is coming
    as 07.02.2010 due to which our overdue receivables are becoming higher
    than the actual.
    If anyone have idea please replay.
    Regards.

    Hi,
    You may refer to SAP Note 24883 for determination of planning date.
    Trust this helps
    Cheers!!

  • Tracking Fixed Assets between receipt and invoice processing

    We have encountered an issue while using Oracle Fixed Assets that we are trying to solve. The issue involves asset tracking from the time of receipt until the invoice is processed and the asset record created and posted.
    As you're probably aware, assets don't appear in FA until the invoice has been accounted and transferred to GL. We can have assets that are received and deployed before we even get the invoice for processing.
    We need the ability to record and track where the asset has been deployed(Employee Name and asset Location) and to later update the appropriate asset records after they are created and posted in Oracle.
    Right now we are doing this manually which means someone is entering data twice for the same thing. Has anyone come up with a workaround to cover this gap between asset receipt and asset creation?
    TIA
    Ken

    Hi,
    I see this is a very old post but did you find a solution? I am keen to learn more about this.
    Mike

  • Ie update fixes are trashing my flashform

    I load three sequential flashforms with user based SQL
    retrieved data loaded into session varibles. I then use the defined
    session varibles to set default cfinput values and populate a
    number of select boxes with SQL queries spaning across tab based
    navigation pages within each of the three forms.
    I have tried the various java script fixes with every one I
    try all of the session varibles and data slices etc are wiped out.
    The form IS activated and the submit buttons and slect boxes
    are activated and fully functional but useless because all of the
    values are wiped clean. As an example, If I type in some input into
    one of my text input boxes and then click a submit button that
    calls new data using flash remoting the new data is populated so I
    know everything is functional.
    I have tried placing the script in the onload, after form
    load and just before the </html> close in my footer template-
    all with the same results.
    Any help would be appreciated.

    Hi, thanks for your help!
    I followed your instructions and still get the message. I'm
    afraid I'm quite ignorant when it comes to js, so please bear with
    me.
    I have 2 questions:
    1. Where do I place the js file I created?
    2. In the js code, what is the function of the "
    " (it's in the code placed on Amara software) but not included
    in your instructions. Could that have something to do with it not
    working for me?
    I should add that I copied the code exactly as is, made no
    substitution for possible variables and such - again, ignorant when
    it comes to these matters.
    Thanks for your help
    E

  • Freight Charges are created as Separate Invoice not within the line items

    Hi Folks,
    I have a peculiar problem here :
    I will assign the freight cost to the items that are getting shipped during shipping either to the lines or to the delivery,
    I Ship the line and create autoinvoice master program.
    Expect that one invoice is generated with the lines that is shipped with the freight charges included in the invoice.
    But there are two invoices generated with line items on one invoice and freight charges on the other.
    We have a setting where in the freight charges are shown as separate line in the invoice.
    This issue cannot be reproduced at will. This is happening in some cases only...
    Any pointers towards it...
    Regards,
    Prasad

    Hi Lukasz,
    I compared the item line and freight line in the RA_INTERFACE_LINES_ALL table....i see the following differences.
    1) Shipment_number for item line is 2 and that of freight line is 0
    2) Line_id is different for both
    3) original_gl_date is populated only for the freight line.
    4) customer_trx_id is different for both the lines.
    I see since the customer_trx_id is different the invoices are different.
    I think how did this populated differently..
    I tried creating a test case wherein trying out same scenarios given in the point no.1,2,3. The system is generating one invoice with item and frieght in one invoice.
    If the issue is with only customer_trx_id different. This field is an autogenerated sequence RA_CUSTOMER_TRX_S.nextval. How did this populate different sequence for item and freight lines?
    Regards,
    Prasad

  • Incoterms are wrong on Intercompany invoices

    Hi All,
    II have a Inter-company scenario in which the Inco terms are not getting copied from Inter-company customer master.
    The scenario is u2013 There is a SA for Sales org u2013 Europe (0280) and the material has to be delivered in Poland (sales org u2013 0440). The delivery is created for the Scheduling agreement and there are two invoices created. One for customer and other for Inter company invoice.
    The actual problem is u2013 With reference to Intercompany invoice the payment terms are getting copied from Intercompany customer but the Inco terms are getting copied from regular customer not from inter company customer.
    Can any one help me to identify the reason why the Inco terms are not getting copied from Inter-company customer master.
    Thanks,
    Jagadish

    Hi,
    First the IV billing will b generated with the reference of the LF
    in the copy control LF to IV u can find the 014  Hdr Dlv-rel IC Bill and item levl 015  Itm Dlv-rel IC Bill (VTFL)
    So,the details of the regular customer will be copied into the Inter company Billing header and item which is related to the Delivery as per the scenario its doing the correct.
    in this scenario the material is send to end customer through the Inter comp plant and Inco Term is related to the Delivery how the customer receive the material ,so its copied from the delivery LF to IV billing of the Regular customer
    And for this pay will be frm Sales org 1 to Sales org 2 so payment term is changed according to that.That is internal customers (sales org 1)
    its all given in the stand by SAP according to the scenario.so its behaving like tht.

  • Business area required for few invoices

    Hi friends i have one issue  which is as per requirement i selected business area is optional but for few invoices it is mandatory and for few invoices it not required, then i done validation it is asking business area for all invoices can i apply substution what is the procedure how it helps me
    please answer i will assign points
    Thanks and Regards
    chennu

    > Hi friends i have one issue  which is as per
    > requirement i selected business area is optional but
    > for few invoices it is mandatory and for few invoices
    > it not required, then i done validation it is asking
    > business area for all invoices can i apply substution
    > what is the procedure how it helps me
    >  please answer i will assign points
    >
    > Thanks and Regards
    >  chennu
    In validation provide the conditions under which it should look for BA and conditions underwhich it should not. Substitution will not help you in resolving this to my  understanding.

  • Different Credit control area in the AR invoice document

    Hi all,
    Our client has the line item display field turned on for the AR reconcilation account. When we run FBL3N for this account, we see a credit control area that is different from what is there on the customer line item in the invoice document.
    When the invoice was entered in FB70, the default credit control area (that defaults from OB38 - co code assignment to cca) was manually overwritten. The invoice document, FBL5N and BSEG table show the new cca, but for some reason FBL3N for the recon account is still showing the old, default cca.
    Did anyone come across a similar scenario?

    Hi Chait!
    I have the same problem do you get any positive response about this issue?
    Thanks in advance!
    Regards
    Daniel

  • How excise invoices are sorted in Excise invoice selection screen (J1ij)

    Sir
    when I do excise invoice creation in Ji1j for customer depatch, in the excise invoice selection screen , the excise invoices are not sorted properly, i.e excise invoice related to 2011 appearing first and then 2008 is appearing then again 2011 is appearing.
    can some one tell me how these excise invoices are sorted?
    Jaya Anand

    Sir
    Not yet. Already   'EI proc' is set as First in firstout only.
    But Still , 2008 document is appearing in the middle of 2011 documents. i.e first 4 documents is related to 2011 and 5th document is 2008 and then again 6th document related to 2011 ect...
    Can I attach the screen shot in this forum?
    Regards
    Jaya Anand
    Edited by: Jayaanand on Nov 21, 2011 10:19 AM

Maybe you are looking for