Flash Builder doesn't recognize instances from Flash CS.

I've currently started working with Flash CS 5.5 and I use Flash Builder 4.6 to work with AS3 files.
A problem arrised when I try to access an instance of a symbol placed on the stage or inside of another symbol.
Flash Builder doesn't recognize the existance of said instance and shows this as an error. (The code compiles fine though.)
Is there any way of bringing instances placed using the Flash CS Editor to Flash Builder's attention?
(I've also noticed that even the code editor of Flash CS doesn't recognize these instances.)
Thanks in advance.

After I hit run the URL that is shown on Firefox is the last page that I was on, so in this case, 'this' pages url; therefore, has nothing to do with what I'm trying to run. So in this case it would be "http://forums.adobe.com/post!reply.jspa?message=3625965"
Now as for which version:
Flash Player version: MAC 10,2,153,1 debugger version
Mac OS: 10.6.7
Update: Alright, it seems to have been some Firefox bug. I upgraded to Firefox 4.x on a haunch and somehow it must of reset whatever that was causing the problem and it now works as nornal. Thanks for the help though, appreciated.

Similar Messages

  • Imovie 8.0.6 doesn't recognize video from Canon Mark 5d II

    imovie 8.0.6 doesn't recognize video from Canon Mark 5d II, worked fine with 5d. imported into computer, exported thru iphoto, came out file ex. MOV which imovie doesn't read. Can I get iphoto to export dif. file ex.?  5d using same process file ex. was m4v.

    Hi Rikk,
    Thanks for answering.
    I downloaded and installed the DNG Converter 7.1, then opened Lr again, but it's still not opening the files.  Am I doing something wrong?
    Please advise.
    Thank you,
    Joel

  • Iphoto doesn't recognize pics from ipod touch

    iphoto doesn't recognize pics from ipod. It says they are an unrecognizable format.
    Anything to do with the new software update?
    btw
    hate this new system.
    I guess the engineers need work?

    Have you been able to get the ISO on that camera before. Did you have the camera set to Auto?
    All of my Canon cameras do not record the specific ISO even though a specific ISO is set. The only Canon file I have that gives an ISO in iPhoto is from a Canon EOS 30D. I have Konica files that provide ISO in iPhoto as does a Nikon D100. The Canon point and shot cameras, s10, s100, s110, s400, s410 and the SD700 IS do not record the specific ISO value. It just give Light Source-Auto when viewed in an application that can read all of the fields.
    Do you Twango?

  • Mail doesn't recognize contacts from my address book

    After installing snow leopard it seems that the Mail application doesn't recognize names that are in my address book. For instance when I start a new email, I will start typing a name in the "to" field, where it used to guess the contacts name it no longer does this. I have about 1800 names in my address book, do I have to introduce these to the mail application one by one in order for it to recognize them?
    Thanks for any help you can give.

    To be more clear (in hopes you can get it to work!) :
    Under Mail -> Preferences -> Composing
    1. Be sure to CHECK the box that says autocomplete addresses under the Addressing heading.
    2. Quit Mail and restart.
    If that doesn't work then I would suggest quitting Mail and trashing the Preference file (~/Library/Preferences/com.apple.mail.plist). Then restart Mail and make sure the box is checked as above and restart Mail. Note that all preferences will be reset to the default and you may need to reconfigure Mail the way you like it. You can always drag the plist file back and restart Mail.app to restore your previous settings.
    Ed

  • Premiere elements 10 doesn't recognize avchd from my canon camcorder

    I have a canon HG20 with Hard Disk but premiere doesnt recognize it and so I cant import video to the organizer or directly to Get Media. Only the flash memory SD of the camera recognize the photos. Im new with premiere elements and Im not sure what it is correct to do. I hope from some help
    Thanks

    Have you ensured that you have the latest version of Quicktime, per the program requirements?
    When you started your Premiere Elements project, did you ensure that you selected settings that precisely match your video and audio specs? For instance, if this camcorder shoots in 1920x1080 with 5.1 audio, did you ensure that your project was set up for Full AVCHD 1920x1080 5.1?
    Part 1 of my free 8 part Basic Training tutorials on Premiere Elements support site Muvipix.com will help you with the basics of project set-up -- a vital part of any project.
    http://forums.adobe.com/thread/537685

  • Vix file in UI builder doesn't recieve data from Webservice application that communicates with SQL server database

    I have created Web service VI ("Prikaz insolacije.vi") which has two input string terminals (FROM / TO) for dates and two output terminals for data (1-D array) collected from database (MS SQL server). This VI communicates with database using functions from database palette with appropriate DSN and SQL query. There are two tables with two data columns (Time and Insolation) in Database.
    This VI works when you run it in Labview 2010, but when I used it as sub VI in UI builder it doesn't return any data.
    Could you please help me find a solution. Is it possible to communicate with SQL server database this way or there is another way?
    There are two attachmet files: Image of .vix file in UI builder and .vi file ("Prikaz insolacije.vi")
    Please help me ASAP!
    Thanks,
    Ivan
    Solved!
    Go to Solution.
    Attachments:
    vix file in UI builder.png ‏213 KB
    Prikaz insolacije.vi ‏35 KB

    Status is False and source string is empty. It behaves like there is no code in VI.
    I tried to access web service directly using following URL:
    http://localhost:8080/WSPPSunce/Prikaz_insolacije/2009-11-05/2009-11-01
    and it doesn' t work. It returns zeros.
    The response is:
    <Response><Terminal><Name>Insolacija</Name><Value><DimSize>0</DimSize></Value></Terminal><Terminal><Name>Vrijeme</Name><Value><DimSize>0</DimSize></Value></Terminal></Response>

  • IPhoto Doesn't Recognize ISO from Canon G7

    For some reason, iPhoto doesn't seem to read the ISO from images taken with my Canon PowerShot G7. Anybody know what the problem could be, or how it could be fixed?

    Have you been able to get the ISO on that camera before. Did you have the camera set to Auto?
    All of my Canon cameras do not record the specific ISO even though a specific ISO is set. The only Canon file I have that gives an ISO in iPhoto is from a Canon EOS 30D. I have Konica files that provide ISO in iPhoto as does a Nikon D100. The Canon point and shot cameras, s10, s100, s110, s400, s410 and the SD700 IS do not record the specific ISO value. It just give Light Source-Auto when viewed in an application that can read all of the fields.
    Do you Twango?

  • Flash Builder doesn't rebuild the project everytime I modify the code

    Hi,
    Flash Builder doesn't rebuild the project everytime I modify the code.
    I find myself chasing ghosts when trying to debug my project. Flash Builder 4.0 doesn't rebuild my project after every change I make.
    The "Project - Build Automatically" is of course selected. To make sure the problem is real I ran "Project - Build All" several times. Nothing helped.
    For example, I am using a boolean constant to select different code in an if block. Even if I change the value of the boolean, When I debug the code, I see that the constant's value doesn't change. Only If I log out login again, FB will rebuild my code.
    This happens too many times and it is very confusing to debug, when you don't know if the result now is with or without your changes.
    It also affects the following:
    - breakpoints that are set or disabled are not taken into account and the debugger will skip them even if they are set or stop on them if they are disabled.
    - the debugger stops the debug on empty lines, if those lines previously contained code.
    - When I comment out the declaration of variables. Eclipse doesn't recognize them and doesn't show any hint on them when you hold the CTRL key and hover over, but while in debug mode, when you hover over the variable instance, its shows a value for it.
    Thanks for your help.
    Bye,
    RaamEE-IL

    The problem is with the SDK settings selected for the Compiler.
    Try going to 'Project' > 'Properties' > 'ActionScript Compiler'.
    Now, in the 'Flex SDK section', try changing the SDK. Click on 'Apply'.
    This will force FB to rebuild all settings for the project.
    You can try again. FB should now have started compiling with latest code changes again.
    Please Note: This is not a permanent fix though!
    In case the problem re-occurs, you'll need to again perform the steps mentioned above to get FB back on track.

  • Facebook doesn't recognize flash player

    I'm have the most recent flash player and Internet Explorer, running Win 8.1. When I try to upload photos on Facebook I'm shown a prompt that says I don't have flash. I click the link, am taken to adobe where I'm told that I do have flash but am not running IE in Win 8. I've gone through the whole checklist of enabling shockwave (it was never disabled) and turing off active x filters (also already in that condition) and can't seem to get Facebook to accept that I've done everything it says that it needs me to do.
    I've installed firefox to see if that would work, it gave me the same "need flash" prompt so I uninstalled and reinstalled the newest flash player. Now firefox allows me to batch upload photos but IE still thinks I don't have flash and adobe.com still thinks that I'm not running IE.
    Is there anything I can do to make your product work in internet explorer?

    It's NOT that Facebook doesn't rrecognize Flash Player. It doesn't recognize IE11, and if it can't recognize the browser, it won't recognize the plugins in the browser. Microsoft is aware of the problems with their new browser, but... they're in no hurry to fix it.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using a different browser. Trouble with that is... it's seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • Dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk,

    dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk, what can I do?

    Well I was able to obtain a work around download of Flash and it installed fine but Firefox tells me it needs updating so I go out, thinking I'm "IN" finally to update it and I get that issue of not being able to get the update for it.  It's a regular laptop, not a touch screen or one of those new fangled ones for todays world.  In fact it's a refurb so it's probably origin date was a year or so ago before all this MS stuff took off fully.  So not understanding why I'm feeling like I'm being BLOCKED from getting the updated Flash I need and desire.  If I click on the little "X" and tell it to ignore the warning the vid will play just fine but don't want to have to do that every time.  Must be a better way. 
    Again, I'm sorry for posting in the wrong forum, getting this posted in the Flash forum was my desire but the way Adobe has this set up I just couldn't figure it out.  I belong to ALLOT of forums and most are pretty straight forward but this one is confusing! 

  • How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

    How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

    1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
    2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
    And if that "public" computer was set up properly, Sync should have been disabled.

  • This Question is at least 2.5 years old.  But still an issue.  I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

  • I downloaded 2 cds onto my ipod nano through itunes.  Recently my itunes account changed and now it doesn't recognize the songs from the cds.  How to transfer from ipod back to itunes?  I don't have the cds anymore.

    I downloaded 2 cds onto my ipod nano through itunes.  Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds.  The songs are still on my ipod.  I am affraid to sync now because the songs may be deleated, and I don't have the cds anymore.  How can I transfer the songs from the cds on my ipod back to itunes so that I don't lose them? 

    What you have on your computer is your iTunes library, not your "account."  The "account" you have for iTunes is your Apple ID, which you use when purchasing or downloading from the iTunes Store.  If these songs came from music CDs that you imported into iTunes, those songs are not related to your Apple ID.
    Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds
    How are they not "recognized"?  Are the songs still listed in your iTunes music library, but grayed out?  They no longer appear in your iTunes library at all?
    If you search your computer (not in iTunes) for the song files, using one of the song names, can you find the song files?

  • I have a Mac Mini, and it won't accept connecting my Sony video camera.  So I got a SD mem card reader to unload my movies from.  It worked the first time I used it a few months ago.  This time it says it doesn't recognize the format I am trying to use?

    I have all thenecessary updates.  I have switched over from a PC to Mac back in April and have nad nothing but problems adapting.  I don't know why this worked the first time, and put my videos inti imovie, and now it doesn't recognize it at all.  And the Mem card reader does work, because I just put the SD card from my regular camera into it and it downloaded those fine, it just won't take my movies!

    Which sony camera? I have a Sony HDR-CX550 right now and have been able to use the SD card as well as connect the camera directly. I also had CX110 that work too. You may want to try to copy the complete top level folder from the SD card to the Hard drive, then try to "import from Camera archive" and select that folder.

  • Imported photo's from computer, via Itunes, to iphone, now itunes can't find the folder with original pictures from Iphone or doesn't recognize it.

    Dear reader,
    i just bought a new Iphone 5s, and decided to download Itunes and sync my Iphone with my laptop. Everyting went well until i decided to try out some things and i imported pictures via Itunes from laptop to Iphone. this is how i did it: Itunes - iphone - pictures - pictures synchronized from 'option choose map' - I chose another map - after, i 'ticked' box 'all maps'. Then i hit the button 'synchronize'. I forgot to look how the orignal map was called and this was the one Itunes syncronised autmatically with, that one also contaned all the original pictures on my Iphone. So, after putting some new photo's on my Iphone, i wanted to change the settings back to normal so my Itunes and Iphone could sync iphone pictures again. But I can't find the old map back or Itunes doesn't recognize the map. I already tried to use the map 'Ipod Photo Cache' but it shows only empty folders. I also tried computer - iphone - Internal storage or DCIM or 860OKMZO; No idea what that means but i thought that the last two folders can contain pictures. However, i get an error if select these ones a map in Itunes. How do I get back to the old settings again?
    I hope I described the problem well; English is not my native language so i'm sure this might contain grammar mistakes.
    A big 'thank you' for helping me in advance!

    When i connected the iphone to my laptop, i found the location of the pictures on the iphone; the a map called  '860OKMZO' (i've mentioned this map earlier, this folder is located inside the folder DCIM). But if i try to open it with Itunes, this error comes up: 'foldername is invalid'. I figured that Itunes could have saved the synchronised pictures in another map somewhere else but i've found nothing... 

Maybe you are looking for