Flash isn't publishing updates in movies

I've been updating old movies(.FLAs) w/ new content for the
past week. I published all the movies fine, but the updates aren't
showing on the browser. What should I do? Please help!

Refresh your page by Ctrl+F5

Similar Messages

Can't do Publish/Publish Setting a movie in Flash CS3

I installed Flash CS3 while still keeping Flash 8. When I try
to publish/publish setting a movie, an alert pops up saying 'No
valid HTML Templates are available to complete this operation'.
Probably there was a conflict so I uninstalled both Flash
CS3, Flash 8 then installed Flash CS3 but the problem still comes
up. What is that?
Thanks in advance.

Hey,
First of all, thx for the answer.
The publish location is fine; it publishes to the same place,
like b4 the problem. Nice thought though.
What kind of problem could it have? And can it be fixed?
I've tried to rename it. Nothing.
It's a template that I've bought and I have the source file
in a ZIP, so every time it happens, after i've done some changes, I
copy them one by one, and then I publish it again and I'ts fine.
I'm sick of doing it...
What it be possible for you to check the file?
Thx,

FLASH 8 publishing a QUICKTIME movie

Hello
I am trying to publish a FLASH 8 file as a QUicktime movie.
WHen I go to publish as a QUICKTIME it says to select VERSION
5 of FLASH. But when I click OK to publish, I get a message tha
tfeatures in the flash file are not supported by VERSION 5 of
FLASH.
What can I do?
Thank you!

what kind of quicktime do you need? there are 2:
1. a flash track in quicktime
2. a true quicktime MOV file (fixed rate, pre-rendered video)
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
WAMER wrote:
> Hello
>
> I am trying to publish a FLASH 8 file as a QUicktime
movie.
> WHen I go to publish as a QUICKTIME it says to select
VERSION 5 of FLASH. But
> when I click OK to publish, I get a message tha
tfeatures in the flash file are
> not supported by VERSION 5 of FLASH.
> ?
> : /
>
> What can I do?
>
> Thank you!
>

Manage SCUP published updates under WSUS and SCCM.

After completion of SCUP environment, I published Adobe Flash player update successfully.
Some where in blogs it was mentioned that published updates are under 'software library' but under SCCM2007 SP2 I am able to see 'software update' and there are no entry of published updates. Under 'software update' there is only Microsoft vendor and no updates
under same.
Also, there is no entry about Adobe updates in WSUS, only Micosoft specific updates are present as per sync.
environment details:
SCUP 2011
WSUS on Win 2008 R2 Server
SCCM 2007 SP2
SQL Server 2008 R2
Please let me know how can I view & manage published updates under SCCM and WSUS.
Below are logs entry specific to SCUP:
Publications workspace: Remove selected updates from publication AdobeFlashPlayer$$<Updates Publisher><Tue Feb 24 12:48:28.584 2015.1><thread=1>
Publications workspace: Starting publish wizard for publication 'AdobeFlashPlayer'.$$<Updates Publisher><Tue Feb 24 12:48:33.573 2015.1><thread=1>
Publish: Preparing list of selected updates for publishing.$$<Updates Publisher><Tue Feb 24 12:48:37.587 2015.12><thread=12>
Connecting to a local update server with locally detected settings.$$<Updates Publisher><Tue Feb 24 12:48:37.588 2015.12><thread=12>
Publish: Update server name: WIN2008R2DC$$<Updates Publisher><Tue Feb 24 12:48:37.610 2015.12><thread=12>
Publish: Publish operation starting for 1 updates.$$<Updates Publisher><Tue Feb 24 12:48:37.611 2015.12><thread=12>
Publish: Publish: Verifying update server is configured with a certificate prior to publishing.$$<Updates Publisher><Tue Feb 24 12:48:37.614 2015.12><thread=12>
Publish: Publish: Update server appears to be configured with a certificate.$$<Updates Publisher><Tue Feb 24 12:48:37.656 2015.12><thread=12>
Building dependency graph for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates Publisher><Tue Feb 24
12:48:37.687 2015.12><thread=12>
No dependencies found for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates Publisher><Tue Feb 24 12:48:37.717
2015.12><thread=12>
Found total of 0 dependencies (may include duplicates).$$<Updates Publisher><Tue Feb 24 12:48:37.717 2015.12><thread=12>
PublishItem: Update ''Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'' has no dependencies.$$<Updates Publisher><Tue Feb 24 12:48:37.718
2015.12><thread=12>
PublishItem: Publishing update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'.$$<Updates Publisher><Tue Feb 24 12:48:37.718 2015.12><thread=12>
PublishItem: --- Evaluating software update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')' for publishing as FullContent.$$<Updates Publisher><Tue
Feb 24 12:48:37.719 2015.12><thread=12>
PublishItem: --- Software update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')' needs to be published with full content.$$<Updates Publisher><Tue
Feb 24 12:48:37.732 2015.12><thread=12>
PublishItem: Retrieving content for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'.$$<Updates Publisher><Tue Feb 24 12:48:37.756
2015.12><thread=12>
PublishItem: --- Content will be saved to C:\Users\Administrator\AppData\Local\Temp\2\\kzfk4dzk.yiy\install_flash_player_16_plugin.msi.$$<Updates Publisher><Tue Feb 24 12:48:37.757 2015.12><thread=12>
PublishItem: Download Content: file was downloaded successfully.$$<Updates Publisher><Tue Feb 24 12:48:57.68 2015.12><thread=12>
PublishItem: Successfully retrieved content for software update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')' to local file: C:\Users\Administrator\AppData\Local\Temp\2\\kzfk4dzk.yiy\install_flash_player_16_plugin.msi$$<Updates
Publisher><Tue Feb 24 12:48:57.69 2015.12><thread=12>
File C:\Users\Administrator\AppData\Local\Temp\2\\kzfk4dzk.yiy\install_flash_player_16_plugin.msi appears to be signed, retrieved certificate, checking signature...$$<Updates Publisher><Tue Feb 24 12:48:57.204 2015.12><thread=12>
TrustChecker: User trusts file.$$<Updates Publisher><Tue Feb 24 12:51:30.548 2015.1><thread=1>
PublishItem: --- SDP XML file for publishing created at C:\Users\Administrator\AppData\Local\Temp\2\tmp182E.tmp$$<Updates Publisher><Tue Feb 24 12:51:30.640 2015.12><thread=12>
PublishItem: --- Calling update server API for publishing update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates
Publisher><Tue Feb 24 12:51:30.752 2015.12><thread=12>
PublishItem: --- PublishPackage call successful for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates Publisher><Tue
Feb 24 12:51:59.290 2015.12><thread=12>
PublishProgress: Publish operation completed.$$<Updates Publisher><Tue Feb 24 12:51:59.305 2015.12><thread=12>
Publish: Background processing completed.$$<Updates Publisher><Tue Feb 24 12:51:59.306 2015.1><thread=1>
WizardBase: closing Publish Software Updates Wizard wizard.$$<Updates Publisher><Tue Feb 24 12:55:37.211 2015.1><thread=1>
Publications workspace: Publish wizard completed.$$<Updates Publisher><Tue Feb 24 12:55:37.234 2015.1><thread=1>
I verified SCCM primary site but not able to trace published updates here. Please let me know how can I see published updates and how can I manage them as well.
Thanks in advance!!!

what does wsyncmgr.log,wsuscontrol.log and WCM.log says ? do they have any adobe related entries ? check if the published adobe products appearing in software update classification ?
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Why does flash player keep sending update requests when I have already installed latest version?

Flash player keeps sending update requests and when I try to install it tells me I need to close internet explorer when it isn't open. How do I make it stop?

Right click ANY flash content and choose "Global Settings" Under Advanced, you can check the version and set updating preferences.

Flash player 11.5 updated using ie8 and firefox wont work Youtube

Flash player 11.5 updated using ie8 and firefox wont work Youtube
Its impossible because after the update i researched and did alot to downgrade and it wont work.
Only domain administrators can play youtube movies. the other simple users cannot play it they get a black screen please i need some clear professional instructions because its not working Youtube

How do I fix Windows permission problems with Flash Player?
http://forums.adobe.com/thread/987370

Video won't run. telling me to update flash player. click on update for mac won't load?

video won't run, telling me to update flash player, click on update for mac won't update. do i need to load flash player and is it ok for mac?

Yes, it's fine for your Mac ...
Most sites such as YouTube require the Flash plugin.
Flash isn't a player per se, but a plugin.
Sometimes uninstalling the current plugin then reinstalling new can help.
Troubleshoot Flash Player | Mac OS
Make sure and uninstall the old plugin first then restart your Mac.
If you use Safari to view videos, from the Safari menu bar click Safari > Empty Cache
Now try a video.
edited by: cs

I know longer have a flash player because the update will not accept my password. I even changed my password.

I no longer have a flash player because the update process will not accept my password even after I changed my password.

We are all alive here, but not working for Adobe. Installing Flash Player isn't asking for your Adobe password.
When you install or update most software you will be asked for your own computer's administrator password. This is the one you chose when you first switched on your machine, and nobody can tell you what it is.

Publish to quicktim .mov

I'm currently using flash 8 and need to publish my movie to a
quicktime movie file. unfortuently its saying that you need to use
flash player 5 or version previous. Also I'm using transparent
gradients, so when I do try to publish the movie it says that flash
player 5 doesn't support the enhanced fill. Is there a way in flash
8 to export a quicktime movie? What do I need to change about the
gradients to get them to export?
Thanks!

teterec wrote:
> I'm currently using flash 8 and need to publish my movie
to a quicktime movie
> file. unfortuently its saying that you need to use flash
player 5 or version
> previous. Also I'm using transparent gradients, so when
I do try to publish the
> movie it says that flash player 5 doesn't support the
enhanced fill. Is there a
> way in flash 8 to export a quicktime movie? What do I
need to change about the
> gradients to get them to export?
there is no way to use new features while exporting to older
version, you need to
compromise on that to make the file flash 5 compatible.
The gradient tho should not be a problem, perhaps there is
something else you use ... ?
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Flash Player installation and update questions and answers

How do I verify that I have the latest version of Flash Player?
If you receive a message that tells you that Flash Player is out of date or a new version of Flash Player is available, you can verify this by visiting the Flash Player Help page with your browser.
Simply click the "Check Now" button and you'll be presented with a short message and detailed information regarding your Flash Player installation.
Where should I download the latest version of Flash Player?
Because malware authors will often employ misleading tactics to make malware look like something you should trust, it's important to get your Flash Player updates directly from Adobe.
Please verify that your Flash Player downloads and updates come from only the adobe.com or macromedia.com domains. You can always download the latest version of Flash Player directly from https://get.adobe.com/flashplayer
I've selected the automatic update option in Flash Player, why do I continue to get update notifications?
Periodically, users are presented with the Flash Player update dialog notifying them that a new version of Flash Player is available for download from adobe.com.
The automatic update mechanism is used for some updates, security patches that address zero-day vulnerabilities and when users, who have selected to be updated automatically, have not updated within 45 days after a regularly scheduled update release of Flash Player.
What should I expect when I receive notification that Flash Player has an update available?
When a major update to Flash Player becomes available you will be presented with a Flash Player update dialog
After reviewing new features, pressing the Download button will open your default browser and load the Install Adobe Flash Player page.
Clicking the "Update now" or "Install Now" button will then take you to the next page which will start the download process and give instructions for completing the Flash Player install.
Finally, once the installation is complete your browser will display a page confirming a successful installation.
If you encounter installation problems, we recommend you review our Windows and Mac OS installation help documents. Further questions and information can be found on the Flash Player installation forums.
Why does Adobe Flash Player installer include the option to download additional software?
Adobe offsets the ongoing development costs of Flash Player, which is made available for free, by offering users the option to download select software from Adobe partners.
What options do I have when installing or updating Flash Player?
You have a few different options available when updating Flash Player. We recommend that you choose "Allow Adobe to install updates (recommended)" when initially setting up Flash Player
or by going into the Flash Player control panel and choosing this option in the Advanced tab.
Once selected, most updates will occur in the background without requiring any interaction. For those regularly scheduled major update releases, you will be presented with an update notification dialog
If you decide not to update, you will receive an automatic update within 45 days if you have the "Allow Adobe to install updates" option selected. Please note that when this update occurs, only Flash Player will be installed.
If you want to be notified about every Flash Player update, select "Notify me to install updates" when initially installing Flash Player or from the Advanced tab in the Flash Player control panel.
Finally, if you'd prefer not to receive any updates, select "Never check for updates (not recommended)". We do not recommend this option as we believe keeping your system up to date improves both security and stability when using Flash Player.
For network Administrators we offer additional update options, including the ability to host your own internal Flash Player update server. Please see our Flash Player distribution page and Flash Player Administrator guide for details.

Sunil, I just want to verify you are pointing me to the link under "Progress bar hangs during download / Unable to connect to server / Unable to download metafile."
If yes, then that is the file I originally downloaded based on a March post I saw here.
I just tried it again, and it (by "it" I mean the Flash Player Plug-in (All other browsers from download.macromedia.com) installed 11.6.
After the installation process completed, the dialog box notified me it was version 11.6, and when I went back to, the "find version" page, 11.6 was confirmed.
I did not download the exe for Internet Explorer, as I almost never use that browser.

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

Unable to install Flash 10.0.2 update on Windows 7

Hi to all,
Recently I installed a fresh copy of Windows 7 32 bit on my HP laptop, and installed all the CS4 applications of Design Premium. The installation went fine, and almost all the updates (Photoshop 11.0.1, InDesign 6.0.4, etc..) installed with no problems. The only one It doesn´t allow me to install is the Flash 10.0.2 update. It gives an error that "the installer detected a problem and cannot continue" and then shows some options to ignore the update.
Any suggestions?
Thanks in advance...

I had the same problem - the auto-updater constantly failed to install the update. I ended up resolving the problem by going to
http://download.macromedia.com/pub/flash/updates/10_0_2/win/Flash_10_0_2_AdobeUpdate.exe
and downloading the update manually. It updated fine.
Hope this helps!

Flash CS5.5[Publish Settings]: How to include custom Metadata tags in swf?

In Flash CS5, the 'Publish Settings' for the fla had an 'Export SWC' checkbox that took care of that.
The option is missing. Why was it removed and how can that be done in 5.5?

Thanks sinious, but, it doesn't work.
Let me elaborate on what I want to do:
I'm trying to create a swf in Flash CS5.5, that's using a flex library (swc) that relies on Metadata tags (anotations).
I need to use the metadata tags in my as3 code (in the fla), and They need to be compiled into the swf (by Flash CS5.5 compiler...).
Although, when I load that swf, the metadata tags aren't compiled into it (I'm using describeType to check if tags are available in the swf).
In flex, I would use the '-kepp-as3-metadata+=' compiler setting to do that, in Flash CS4 & CS5 I used the 'Export SWC' in the publish settings, but that's removed (WHY???).
Checking XMP Metadata didn't change that, the tags are still not included in the compiled swf.
Anyone?

When I try to watch any video clip I get this: The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's we

When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!

This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates <

The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's website.

The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.

You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
Nor have you said what version of OS X and Safari you are running.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Flash isn't publishing updates in movies

Similar Messages

Maybe you are looking for