Flash pro cs4 and OSMF 1.5

hi i am trying to build a custom OSMF player using "osmf1.5.swc" and flash cs4 professional but getting this errors.....
1046: Type was not found or was not a compile-time constant: DRMStatusEvent.
1046: Type was not found or was not a compile-time constant: SystemUpdater.
1046: Type was not found or was not a compile-time constant: DRMStatusEvent.
1046: Type was not found or was not a compile-time constant: DRMErrorEvent.
1046: Type was not found or was not a compile-time constant: DRMAuthenticationCompleteEvent.
1046: Type was not found or was not a compile-time constant: DRMAuthenticationErrorEvent.
1046: Type was not found or was not a compile-time constant: SystemUpdater.
and the AS 3.0 code i am using is...
package
          import flash.display.*;
          import org.osmf.containers.MediaContainer;
          import org.osmf.elements.VideoElement;
          import org.osmf.media.MediaPlayer;
          import org.osmf.media.URLResource;
          public class displayarea extends MovieClip
                    public function displayarea()
  //testing console o/p
                              trace("hello");
                              //OSMF code starts here
                              var container = new MediaContainer();
                              addChild(container);
                              var videoelement = new VideoElement(new URLResource("Pixar_Presto.flv"));
                              container.addMediaElement(videoelement);
                              var mediaplayer = new MediaPlayer();
                              mediaplayer.media = videoelement;
any suggestions?

Thank's a lot that worked,but again i got this  (in output tab not in compiler error tab) by pressing ctrl+enter
VerifyError: Error #1053: Illegal override of play2 in org.osmf.net.httpstreaming.HTTPNetStream.
ReferenceError: Error #1065: Variable MainTimeline is not defined.
however it is working fine when i opened the swf in a webbrowser.

Similar Messages

  • Need to re-download and reactivate Flash Pro CS4 on new computer

    I recently purchased a new computer and would like to download and activate the Flash Pro CS4 that I had on the old computer onto the new computer. I have already deactivated the program.

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Need help! Installation Failed of Flash Pro CS4

    Sorry for my bad Eglish first.
    I downloaded a trial version of Flash Pro CS4 on the Adobe official website and installed it in my Win 7 (x64) using the user account (as an Administrator).
    It seems that every step of the installation is fine, except end up with the "installation failed" dialog window as the following snapshot.
    (Sorry for the Chinese messages in the snapshot, it says "Installation Failed" and "One or more required components of Adobe FlashPro CS4 failed to install correctly")
    I clicked the button on the bottom left for further detailed information, and it showed:
    Adobe Flash CS4
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    Adobe Bridge CS4
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    Adobe Device Central CS4
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    Adobe Drive CS4
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    Adobe ExtendScript Toolkit CS4
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    Adobe Extension Manager CS4
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    Adobe Media Encoder CS4
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    Pixel Bender Toolkit
    Error:
    Error 1603. Error 1317.An error occurred while attempting to create the
    directory C:\ProgramData\Microsoft\Windows\Start Menu
    I tried deactive my AntiVir and close the other applications and then installed again, but in vain.
    Could soemone please give me a help to solve the problem?
    Thank you

    If the video is playing back badly in Premiere Pro from the timeline, then the things I would check would be the program monitor quality - is it set to highest...if you don't know where that it is, click on the 4 horizontal lines in the top corner of the program monitor - make sure highest quality is selected. It also may be a video card issue - are your drivers up to date? If the clips are only playing back badly on the PPro timeline (and anything exported from it), but fine in Windows Media Player - something is up.
    As for the frame rate - no, you don't have to work at 24P...as mentioned before, the camera actually records at 29.97 fps, but is able to be played back and edited at 23.976 fps (or 24P)...it's a complicated explanation on how it all works...
    If you're going to finish to a regular DVD, then working at 29.97 is the way to go. As for the interpret footage command, highlight the clips in your bin, then right click on them - in the menu, you'll see interpret footage - click on that and a new window should open...you should see a box with a check next to it that says remove 24P pulldown - click it (removing the check) and the footage frame rate should change to 29.97 - then click OK...create a 29.97 sequence (DV NTSC Widescreen 48Khz), and edit away.

  • Problems with my Flash Pro CS4... + Mac Snow Leopard

    Hello !
    Since last week I cannot use my Adobe Flash Pro CS4, when I open the application it loads but I cannot see anything, not the timeline, not the scene, library... anything at all.
    I have reinstalled the app but still does not work. I have followed different steps, removing fonts and things like that, but the problem still there. It is disturbing as I develop websites.
    Can anyone give me some possible solutions.
    Thanks,
    Milo

    Thanks but your Mac is luckier than mine. I tried and failed.
    Just gives me a white square but not the workspace or timeline nor anything to work.
    Thanks for trying to help.

  • I am unable to re-install Flash pro CS4 after my PC crashed.

    The Setup program insist that one component or more were not installed properly. Adobe does not provide support for CS4, even for  reinstallation issues and left me stranded with fully paid, unfuctional Flash pro CS4 version. Any bright ideas how to install? I have tried to download and set it up several times.
    Thanks
    Joseph Karov

    What is your operating system & version?
    Can you provide the installation logs; see http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html

  • BUG - saving with both flash pro CS6 and CC causes library symbol names to change

    Concise problem statement:
    If you save with flash pro CC and then save with CS6, in the library panel, symbol names are changed.
    Specifically, pipes | and trailing spaces ("|Divider", "Divider ") get replaced by escape sequences ("&#124Divider", "Divider&#032" ...) Ampersands & and number signs # also get replaced, such that symbol names grow exponentially if you continue to save with both flash pro CC and CS6 ("Divider&#032", "Divider&#038&#035032", "Divider&#038&#035038&#038&#035035032" ...) This makes it difficult to transition a team from CS6 to CC.
    Sometimes, the original-name symbol remains, and an escaped-name symbol is also created. In this case, the children are removed from the original-name symbol, so it doesn't render anything to the screen; a mysterious, silent failure.
    Steps to reproduce bug:
    1. Create a library symbol named "|", save an xfl with flash pro CC, and close.
    2. Open, save, and close with flash pro CS6.
    3. Open, save, and close with flash pro CC.
    Results:
    A library symbol named "&#124".
    Expected results:
    A library symbol named "|".
    I submitted this bug with the bug form, and also with adobe bugbase (in case it isn't obsolete) - I'm just trying to maximize my chances of getting a fix.  Has anyone else encountered this bug?

    Hi,
    We are aware of this issue and its open for investigation internally. This issue is observed when you have certain special characters in your symbol names and try to open that file in Flash CS6. This happens due to a change in the way symbol naming is handled in Flash CC and in Flash CS 6.
    As a workaround, request you to use only Underscore or Hyphen as special characters while naming symbols or library layers etc.
    We shall update you as soon as this has been fixed.
    Thanks,
    Nipun

  • Adding Flash Player 11 support to Flash Pro CS5 and CS5.5

    http://blogs.adobe.com/rgalvan/2011/11/adding-fp11-support-to-flash-pro-cs5-and-cs5-5.html
    by Rich Galvan @Adobe
    MXP has been released. I tested on CS5 and seems to work
    Kenneth Kawamoto
    http://www.materiaprima.co.uk/

    Yes you could but that also displays the debug movie console which is uneccessary if you just want to quickly test your movie.
    I find myself using Test Movie hundreds of times a day and I just want a clean, quick, uncluttered view of how my work will look.
    I do use Debug Movie but only occasionally.
    More importantly though is that I'm not sure FP11 is ready yet. Its got a pretty horrible bug that really affects my work:
    http://forums.adobe.com/message/3993046#3993046
    Just my opinion!

  • Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

    Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
    can any one help me bcoz i have to publish without air runtime.......

    Hi,
    This option is available when your publish target is set to AIR 3.6.
    You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
    Thanks!
    Mohan

  • Flash cs3, cs4 and cs5 always not responding in windows7

    I have installed adobe flash cs3, cs4 and cs5 in windows 7, but it is always not responding when I run them. While they are running normally when running on my WindowsXP. I had to reinstall them several times, the result remains the same. Is there any problem in my windows 7 ? can someone help me? thanx.

    Problem is not in your windows 7 OS, since i was working CS4 and now i m working with CS5 in windows 7 only. And i feel more comfort with this new OS. May be you hardware configuration might not be support to new technology like windows 7 and Flash CS5. Beca it is need high hardward configuration

  • I have FB4 and Flash Pro CS4 installed and get the message "This feature requires Adobe Flash CS5"

    I have intalled CS4 Design Premium and Flash Builder 4 (the trial version).  According to this Adobe
    training video they should work together "http://tv.adobe.com/watch/adc-presents/flash-builder-4-and-flash-professional-cs4-workflow /".
    However, when i try to create Flash Professional component for use in Flex as specified in the  the workflow  video to (i.e. copy a .fla to
    Flex Project lib directory or drag "custom" Flash Professional component onto state to link to Flash Pro) - I get the  "This feature requires Adobe Flash CS5"
    error mesage.
    Thanks for your help!
    Bob W.

    I have intalled CS4 Design Premium and Flash Builder 4 (the trial version).  According to this Adobe
    training video they should work together "http://tv.adobe.com/watch/adc-presents/flash-builder-4-and-flash-professional-cs4-workflow /".
    However, when i try to create Flash Professional component for use in Flex as specified in the  the workflow  video to (i.e. copy a .fla to
    Flex Project lib directory or drag "custom" Flash Professional component onto state to link to Flash Pro) - I get the  "This feature requires Adobe Flash CS5"
    error mesage.
    Thanks for your help!
    Bob W.

  • Premier Pro CS4 and Camtasia imported screen capture

    I have a question from one of you professionals regarding Camtasia screen capture video imported to PP. I used several settings that was suggested in the posts in these forums and others and the quality of my video is still very bad. Please Help:
    I am making a four minute training video that includes some screen shots of software. The final video will be put on DVD and Flash for website.
    My capture settings of Camtasia are 1024 X 768. I used Tech smith codec and I used Logarith codec to produce the video in AVI from camtasia.
    I set my PC screen size to 1024 X 768 as well.
    My Premier Pro CS4 Setting HDV 1080i, 29.97 frame rate. 1440 X 1080 Frame size.
    I also used the following frame sizes DV NTSC, 29.97 frame rate. 720X480 frame size
    I also used MPEG2, HDTV 720p, 29.97High quality, 1280 X 720 frame rate
    None of the above settings worked. Please help
    Thank you

    This ARTICLE and the included links might be helpful. Be very sure to look at all of the replies by Jeff Bellune on using the TechSmith CODEC's from Camtasia. I think that he replied in most linked threads.
    Good luck,
    Hunt

  • Premiere Pro CS4 and my laptop

    Hi everyone,
    I'm using Premiere Pro CS4 on my laptop with below specs:
    Intel Pentium III Seon 2,27 Ghz
    3GB Internal memory
    ATI Mobility Radeon HD 3430  (512 MB)
    FUJITSU MHZ2250BH G2  (232 GB, IDE)
    Windows XP 32 bits with Service Pack 3
    Recently i've experienced really bad video playback. When I play a video to start edit it, it starts stuttering. I've tried the settings on "automatic quality" and "draft quality", bot in both situations the same problem. The video i'm editing now is HD1080 GoPro video. Also tried it was an already converted version of this video to AVI.
    I expect that a laptop from the time that CS4 came out, suitable for 32bits system, should be working on my (in that time) better than average laptop.
    Please let me know if i'm totally wrong and there is no way that Premiere is gonna work on my system!
    Thanks in advance,
    Danny

    System requirements Adobe Premiere Pro CS4
    Windows
    2 GHz or faster processor for DV; 3.4 GHz for HDV; dual 2.8 GHz for HD*
    Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and 32-bit and 64-bit Windows Vista)
    2 GB of RAM
    10 GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
    1280 x 900 display with OpenGL 2.0–compatible video card
    Dedicated 7200-RPM hard drive for DV and HDV editing; striped disk array storage (RAID 0) for HD; SCSI disk subsystem preferred
    For SD/HD workflows, an Adobe-certified card for capture and export to tape
    OHCI-compatible IEEE 1394 port for DV and HDV capture, export to tape, and transmit to DV device
    DVD-ROM drive (DVD+-R burner required for DVD creation)
    Blu-ray burner required for Blu-ray disc creation
    Microsoft Windows Driver Model– or ASIO-compatible sound card
    QuickTime 7.4.5 software required to use QuickTime features
    Broadband Internet connection required for online services†
    My harddrive is a Fujitsu Mobile MHZ2250BH-G2 250 GB hard drive. With a Spindle Speed of 5400 rpm. So not the 7200-RPM which is needed for HDV and HD editing?
    And if I understand it correctly I would need a 3,4 Ghz for HDV editing or Dual 2,8 Ghz processor for HD editing? GoPro is HD1080, so would need at least the Dual 2,8 Ghz?
    Thanks,

  • Premiere Pro CS4 and Adobe Media Encoder Problems

    I am using Adobe Premiere Pro CS4 on a Mac running 10.6, and I consistently encounter this problem when trying to export a Premiere project using Adobe Media Encoder.
    What does this mean? And has anyone else encountered this problem as well? I really need a fix if there is one, because I really need to be using Premiere. I have reinstalled several times, but to no avail. Help me please!

    Jim, thanks for testing.
    My concerns are about a)distribution and general b)compatibility.
    a) When videos are distributed most of the users will probably try to open the files with Windows Media Player. So it is not a good start to have fresh exported h.264 videos which won't run fine with the 'main' player on windows
    b) I am wondering if the Problems with Windows Media Player may also be a sign of a general compatibility issue of the h.264 video itself
    At least in case b) Adobe would have to look into this.
    Here is another test video:
    http://www.tsxn.com/storage/transfer/Serenity.zip
    Thank you
    Chris

  • Premiere Pro CS4 and Canon 600d problems

    Hello,
    Recently I've been having a few recourring problems when trying to edit footage I captured on my Canon 600D on Adobe Premiere Pro CS4.
    The footage shot on the Canon is 1920x1080 at 24fps, when I create a setup preset for these settings in Premiere the clips appear to import absolutely fine. The setup Ive created is shown in the screenshot below.
    The problems start when I place the clip on the sequence and render it, once the clip renders the playback in the program/timeline preview window goes all weird and doesn't play the clip properly. Shown in the screenshot below.
    First of all I thought this might just be a playback error but when I try to export it as a video file it says error and closes down. This is extremely irratating so i wondered if anyone would be able to offer me a soloution. I have a feeling it may be my setup preset but if so would someone be able to tell me the correct way to set it up for a canon 600d camera because whenever I try a preset found within premiere it exports the video at 720 resolution and very low quality.
    Thanks very much for whoever replies, I appreciate it very much
    Mike

    Ahhh okay that sucks, is there anyway to convert the footage that I already have without drastically reducing the quality as I want my film to be the best quality that is possible?

  • Premiere Pro CS4 and Audition 3 problem!

    Please help! I have CS4 Premiere and Audition 3 I update Premiere to version 4.2 and I got to edit in Audition, but dark and I can not hit. When I push edit original, audition opened and the processed sound. When I want to save the file leaves me a window that can not be done because the file is open in another program. Thanks in advance reply.

    The solution is very simple,:
    This  update resolves the question.
    This update install modification in  dynalic link to support adobe autition3 instead of soundbooth.
    This updaye , also  adds support for AAF   import/export, Apple Final Cut Pro XML project import, and OMF export,   along with
    numerous other stability and quality improvements. The  update  is recommended for all Adobe Premiere Pro CS4 users.
    An important detail is that this feature only works in Windows. Sorry ´bout the poor MAC software.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4088
    The home page of all updates for Premiere Pro CS4 is here :
    http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
    Reinstalling all the apllication and if  the aplication is standard  CS4 (4.0)  this acti0on will not resolve the issue.
    My recomendation is to install  update 4.0.1 and 4.1.0
    Others like 420, 421 is apllicable only if demand  use of large avc intra, red format and p2 with h264 and other improvments
    Best  Regards,
    Leon  Unger
    Adobe Certified Professional

Maybe you are looking for