FlashBuilder 4.7 shows wrong errors at start

Once in a while when I start FB 4.7 it shows me a bunch of wrong errors during which I cannot compile anything but after a few minutes especially after opening the files the errors point to, all the errors (correctly) disappear and I can work normally again. Typically all those errors are like this and concerning only starling Texture which I use in my project:
1067: Implicit coercion of a value of type starling.textures:Texture to an unrelated type starling.textures:Texture.
I'm using the source code version of starling and I do not use any other starling source code or compiled swc so there shouldn't be duplicates anywhere + like I said the errors disappear after a few minutes. Any idea how to fix this annoying behavior?

Result:
FlashBuilder appears to have a problem with Android version 4.2.2.
Discovery / Assumption reasoning
Tested same application in FlashBuilder to publish to Android 4.0.x, Android 4.1 and to Android 4.4 all result in success on both virtual machine, tablet and mobile devices.
Advice for Tablet users using Android 4.1.x with same problem:
1. Google search "install android 4.4 on entery your device name here"
2. Follow instructions which usually comprises of
2.1. Download bootloader recovery software and flash with odin 1.85
2.2. Download rom
2.3. Download pa_gapps_modular full
2.4. Download Super User
2.5. Copy files 2.2 and 2.3 to your internal memory on device or to external SD card
2.6. Reboot into backup & recovery tool
2.7. Backup everything
2.8. Install rom via zip selection
2.9. Install gapps (google apps) via zip selection
2.10. Install update (root) via zip selection
2.11. Reboot and enjoy Android 4.4 on your Tab 10.1
If you insist on using 4.2.2 then your going to have to either start publishing to the app store and installing and re-installing from there to test or try installing the apk via a memory card reader on the external sd card and installing it via file browser and select on the device.

Similar Messages

Showing following errors in starting database..

Hello Everyone I am newer in this Forums.. I am using oracle 10gXE but its showing folliwing Errors .. what could be the reason and how i can solve it..??
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 8 11:46:34 2
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys as sysdba
Enter password:
Connected to an idle instance.
SQL>
SQL>
SQL>
SQL> startup;
ORA-01081: cannot start already-running ORACLE - shut it down fir
SQL>
SQL>
SQL>
SQL> select * from dept;
select * from dept
ERROR at line 1:
ORA-01012: not logged on
SQL>
SQL>
SQL>
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-01090: shutdown in progress - connection is not permitted
SQL>
SQL>
Regards,
Indra Parmar

SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 8 11:46:34 2
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys as sysdba
Enter password:
Connected to an idle instance.
SQL>
Query the status of the instance
select status from v$instance;and status of the database..
select open_mode from v$database;What is th result post it.
Regards,
ragunath

My hp elitebook 6930p shows BIOS error on starting

my hp elitebook 6930p shows BIOS error on starting

Hi:
Yes you can get any version of W7 that the product key on your notebook is good for at the link below.
Use the applicable SP1 Media Refresh ISO file as they are the latest ones.
http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...
After you download the ISO file make sure you got the whole advertised file size.
Then use this tool to transfer the ISO file to a 4 GB USB flash drive or DVD.
The tool will also make the media bootable.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool

HTMLLoader.pdfCapability showing "wrong" error. Help?!

Hello all,
Just started trying to use the AIR HMTL component with its HTMLLoader. Tried to load/view a pdf doc. Seems to recognize the doc, but all it displays is a black region. In other words, the HTMLLoader area goes from white to black after attempting to load the PDF.
Checking the HTMLLoader.pdfCapability shows 3202: ERROR_INSTALLED_READER_TOO_OLD
The problem: I just paved my hard-drive with a new Windows install. The only Adobe Reader that's on my system is a fresh version of:
Adobe Reader X (10)
How can this reader be too old? I'm beginning to guess that the system is possibly reading "X" as the version, rather than 10, and so it thinks it's too old?! Can this actually be happening?
Also, i'm not receiving any ErrorEvent from the htmlLoader upon load. It seems to load and/or try to load something as the area goes black. Trying to load other random files does not yield that result.
I'm using the trial version of FlashBuilder 4.
Any help VERY appreciated, especially pronto.
Thanks much in advance.

Hi!
I had the same problem: 3203.
Solution found: I uninstalled Adobe Reader and installed it again via the adobe.com site.
This was the solution I found to this problem.
I hope this helps.
Hugs.

Terminals show wrong Chars when started via Wmii-Hotkey!

Hi there!
Whenever i start an app in an urxvt via Wmii-Hotkey ("urxvt -e centerim" as well as "urxvt" and input "centerim"), there are problems with some characters shown (the german umlauts ä ü ö, in my case). These just look strange then.
The problem doesn't occur when i launch these apps from an urxvt created by another terminal.
EDIT: Same goes for Xterm! The problem seems to be on wmii's side...
Last edited by mienensuchkind (2008-03-06 21:19:29)

mienensuchkind wrote:
$ cat .Xdefaults | grep font
urxvt*font: xft:Consolas:pixelsize=21
urxvt*boldfont: xft:Consolas:pixelsize=21
Aterm*font: xft:Consolas:pixelsize=1
Aterm*boldfont: xft:Consolas:pixelsize=188
$ cat .wmii-3.5/wmiirc | grep FONT
DMENU_FONT='-*-fixed-medium-r-*-*-13-*-*-*-*-*-*-*'
WMII_FONT='-*-fixed-medium-r-*-*-13-*-*-*-*-60-*-1'
Well, the font-rules from wmii dont have anything to do with the fonts shown in my terminal, don't they? They only change the wm's font (text in statusbar and window-titles).
EDIT: I just changed my WMII_FONT & DMENU_FONT from fixed to veranda. Now it magically works oO.
Thank you so much!
I am sort of suspicious that your urxvt fonts setting is not working.
You can try putting the working WMII_FONT in urxvt font setting and keep your WMII_FONT back to "fixed". If it is still working, that means, your "consolas" fonts were not used at all.
I never used xft font setting in urxvt, so no clue of whether your current setting is correct.

Error: "Depreciation start date required in old assets data (please enter)"

When , I use transaction AS91 , for an asset , with book depreciation key = 0000, the system shows this error:"Depreciation start date required in old assets data (please enter)",
somebody could help me with this please?

Check if the depreciation start date has got populated in the tab for depreciation areas in AS91.
Usually this gets populated based on capitalization/creation date.If not then try to enter this manually.
Thanks and regards
Kedar

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I iphone is showing an error 0xE800005 the logo starts turning in itself for hours. What should I do?

i iphone is showing an error 0xE800005 the logo starts turning in itself for hours. What should I do?

The page is just on my desktop and not on a server, so I'll post the code (sorry).
Apparently Dreamweaver can't find the file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Unable to load page</title>
<style type="text/css">
#container {
          width: 50%;
          margin: 3em auto;
          font-family: Verdana, Geneva, sans-serif;
#dwicon {
          float: left;
          margin-right: 2em;
#error {
          padding-top: .5em;
#desc {
</style>
</head>
<body>
<div id="container"> <img id="dwicon" src="dw://configuration/Shared/ICE/Images/warning_icon.gif" width="32" height="32" alt="Warning" />
<h3 id="error">Server Not Found</h3>
<p id="desc">The page "http://localhost/iscroll.js" was not loaded because Dreamweaver could not find the server "localhost". Please make sure you are connected to the internet and the server name is correct.</p>
</div>
</body>
</html>

Why I can't login to my iMessage using my apple password. It was showing password or username wrong error message. I try this many time but my username and password correct

Why I can't login to my iMessage using my apple password. It was showing password or username wrong error message. I try this many time but my username and password correct

I have the same trouble , I can't activate iMessage using my apple id.
I think this is from OS itself (6.0.1) .

On sleep show white o pink screen, most of the time error on start up win8

hi i got two compter with the same problem, both are (Satellite S855s5382)
1. On SLEEP, 1. lapotp went i close the laptop and then open it the screen turns white or some times show a pink screen
2. laptop same problem like the 1 one, but some times show the half of the screen
2. WIN8 , both has error on startup most of the time went i star it take to much to run win8 and then show an erro on start up and show 3 icons an the desktop it is defalut, i restart it and start to check up the hdd then take so much to RAPAIR IT
for the second error it is only on win8, on win7 i dont have this problem
On win7 the firs problem it is the same

a little difficult to figure out just what all your issues are but I'd suggest making an image of your system and saving to an external drive, then doing a restore back to out-of-box state and see if that fixes things. If not, post back.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

While the session got started in ODI,but still showing me errors in Execution

Hi Folks,
Session got started in ODI but it is still showing me errors in execution:-
Errors are coming marked in red
Errors are like:-
1)
ODI-1217:Session INT_INFext_RT_RF(17001) fails with return code 30088.
ODI-1226: STEP INT_INFext_RT_RF fails while performing a Loading operation.This Flow loads Target Table TRG_SALES_PERSON.
ODI-1228:Task SRCSET0 (Loading) fails on the target ORACLE connection ODI_STAGE.
Caused by :Java .sql.SQLException :ORA-30088 :datetime/interval precision is out of range
at oracle.jdbc.driver.T4CTTIoer.processerror(T4CTTIoer.java:462)
Hope this finds the solution ASAP.

Please post your Data Integrator questions on the Data Integrator forum (this is Data Service Integrator) Thanks.
Data Integrator

Time machine : started the restoration, stopped mid-way and didn't show any error message

Hi, i made a complete backup of my system to be able to install windows 7 via bootcamp. I had to backup because a complete format was necessary.
I reinstalled Mac OS X 10.6 (the exact same version i had) everything works just fine. I started the time machine so i could have everything i had before i formatted. The restoration started normally and continued until about half. Then, the transfer window dissapeared, not showing any error message. I don't see my disk image that i was copying. It's nowhere to be found.
And now, i can't even try again because there's 150 GB that i can't seem to find anywhere (which is about half of my backup) and there is not enough space on my hard drive anymore. I try to find what was copied and there is nothing.
Please HELP ME !!!

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

FlashBuilder 4.7 shows wrong errors at start

Similar Messages

Maybe you are looking for