Terminals show wrong Chars when started via Wmii-Hotkey!

Hi there!
Whenever i start an app in an urxvt via Wmii-Hotkey ("urxvt -e centerim" as well as "urxvt" and input "centerim"), there are problems with some characters shown (the german umlauts ä ü ö, in my case). These just look strange then.
The problem doesn't occur when i launch these apps from an urxvt created by another terminal.
EDIT: Same goes for Xterm! The problem seems to be on wmii's side...
Last edited by mienensuchkind (2008-03-06 21:19:29)

mienensuchkind wrote:
$ cat .Xdefaults | grep font
urxvt*font: xft:Consolas:pixelsize=21
urxvt*boldfont: xft:Consolas:pixelsize=21
Aterm*font: xft:Consolas:pixelsize=1
Aterm*boldfont: xft:Consolas:pixelsize=188
$ cat .wmii-3.5/wmiirc | grep FONT
DMENU_FONT='-*-fixed-medium-r-*-*-13-*-*-*-*-*-*-*'
WMII_FONT='-*-fixed-medium-r-*-*-13-*-*-*-*-60-*-1'
Well, the font-rules from wmii dont have anything to do with the fonts shown in my terminal, don't they? They only change the wm's font (text in statusbar and window-titles).
EDIT: I just changed my WMII_FONT & DMENU_FONT from fixed to veranda. Now it magically works oO.
Thank you so much!
I am sort of suspicious that your urxvt fonts setting is not working.
You can try putting the working WMII_FONT in urxvt font setting and keep your WMII_FONT back to "fixed". If it is still working, that means, your "consolas" fonts were not used at all.
I never used xft font setting in urxvt, so no clue of whether your current setting is correct.

Similar Messages

[Solved] MPD won't play when started via systemd

When I try to play from mpd (after starting it from systemd with "systemctl start mpd"), nothing happens. In ncmpcpp, when I press play, it quickly shows play and then immediately goes to "paused". When I start MPD normally from the command line (just by running "mpd"), it works fine, but for some reason, some conflict is being caused by systemd.
Is there anywhere I should start to look? I don't really know how to troubleshoot it, as I don't know how to make it log without running it from the command line.
EDIT: I set up systemd --user and wrote a service for it. It seems that mpd was running as root and caused some permissions issues.
Last edited by miscsubbin (2013-06-11 01:03:34)

Raynman wrote:
Output ends up in the journal by default.
When starting "normally", do you also start mpd as root (since there is no "--user" in your systemctl call)?
I just checked and it is running as root, however, when I do
systemctl --user enable mpd
I get:
Failed to issue method call: Process /bin/false exited with status 1

Key Figures With Hide can be shown showing wrong values when displayed in a query

Hi Experts,
I have a qiery with two structures in the column(cell Definition) three key figures are displayed and the rest are all hide can be displayed. However whenever i display one of the hidden key figures along with one displayed key figures it initially shoes incorrect values. Once i add another key figure (which has status always show) the hidden jey figure value gets corrected. Is it a problem with the structure? Kindly assist.For example when i display the actuals(always show) and actuals rate(hide can be shown) the values for actuals rate are wrong , however when i add the plan rate(always ahow) the values for actual rate gets corrected. Screenshots for structures below.

Hi Sayanto,
For this I would recommend you to check the Key figure definition in all 3 situations.
1. original display
2. display of hidden KF
3. Display of existing KF
I suspect that cell references may have some effect on the calculation as you are adding the hidden KF in analyzer directly. You can prove this only by checking Key figure definition.
Please let me know if you are facing any issue in getting the Key figure definition itself.
Also, as Cornelia suggested check if you have any constant selection applied to any of your KFs.
Hope this helps.
-Swati.

Shows error message when starting up, then turns off

Hi, my ipod shows the apple when I restart it, then shows the folder with the exclamation point then shuts off. Also, the computer won't recognize it. Since it doesn't show up on the iTunes or the Finder, is there anything I can do?
Thanks.

Since this is over a week old, I assume you've got the problem sorted out.
If not, please ignore the spammer & see if this can help;
http://docs.info.apple.com/article.html?artnum=61003

FlashBuilder 4.7 shows wrong errors at start

Once in a while when I start FB 4.7 it shows me a bunch of wrong errors during which I cannot compile anything but after a few minutes especially after opening the files the errors point to, all the errors (correctly) disappear and I can work normally again. Typically all those errors are like this and concerning only starling Texture which I use in my project:
1067: Implicit coercion of a value of type starling.textures:Texture to an unrelated type starling.textures:Texture.
I'm using the source code version of starling and I do not use any other starling source code or compiled swc so there shouldn't be duplicates anywhere + like I said the errors disappear after a few minutes. Any idea how to fix this annoying behavior?

Result:
FlashBuilder appears to have a problem with Android version 4.2.2.
Discovery / Assumption reasoning
Tested same application in FlashBuilder to publish to Android 4.0.x, Android 4.1 and to Android 4.4 all result in success on both virtual machine, tablet and mobile devices.
Advice for Tablet users using Android 4.1.x with same problem:
1. Google search "install android 4.4 on entery your device name here"
2. Follow instructions which usually comprises of
2.1. Download bootloader recovery software and flash with odin 1.85
2.2. Download rom
2.3. Download pa_gapps_modular full
2.4. Download Super User
2.5. Copy files 2.2 and 2.3 to your internal memory on device or to external SD card
2.6. Reboot into backup & recovery tool
2.7. Backup everything
2.8. Install rom via zip selection
2.9. Install gapps (google apps) via zip selection
2.10. Install update (root) via zip selection
2.11. Reboot and enjoy Android 4.4 on your Tab 10.1
If you insist on using 4.2.2 then your going to have to either start publishing to the app store and installing and re-installing from there to test or try installing the apk via a memory card reader on the external sd card and installing it via file browser and select on the device.

Library shows wrong ports when using external MIDI

Whenever I start a new project and choose an external midi track the library displays the wrong ports. I have an Axiom 25, Motif XS6, and a Kurzweil through an Ultralite. The Axiom and Ultralite show correctly but the MOTIF (which has 3 ports) are all under the Axiom Port 1 listing. Any ideas on how to reset the library so it displays the correct ports.

I found the answer: The Axiom was listed in the default evnironment. when clicking on one of the wayward axioms that appeared in the library it actually produced the right port in the midi track. Then looking at the environment I found that it had produced another axiom with the yamaha port. By clicking on all four axioms in the library I was able to go to the environment and change the name to the proper Yamaha port. They then appeared in the library correctly.
The secret was setting up the environment correctly.

Different behavour of MAM application when starting via NWDS versus SAP MI

Hello,
We have MAM25 installed and running and have implemented some modification. When I run and test the application from the NWDS everything works fine. But when I restart my laptop and I'm NOT using NWDS and start the mobile client and test the (already deployed) application from there, then the application is behaving differently some functionality that is created is working different.
It looks like that the mobile client is started with different startup parameters. Does anyone has the same experience? Is the Mobile client started differently from NWDS (via run application)? If yes, why?
Hope some one can help me?
Regards,
Ryan

Hello Julien,
Thanks for your answer. But I'm not sure how to check the classpath and the startup class. may you can help me:
In nwds I see that when I run the application the main class is: com.sap.ip.me.mdk.api.runtime.Start and the arguments are: "-home:C:\Program Files\SAP Mobile Infrastructure" -trace -url:MAM25_V30/start -app:jsp. The class path from MAM is set to:
    <classpathentry kind="src" path="java"/>
    <classpathentry kind="var" path="JRE_LIB" rootpath="JRE_SRCROOT" sourcepath="JRE_SRC"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/db2ejdbc.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/crimson.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/jasper.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/jaxp.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/MEg.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/pinstall.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/servlet.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/webserver.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/system/crimson.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/system/jaxp.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP Mobile Infrastructure/lib/system/xalan.jar"/>
    <classpathentry kind="lib" path="C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ip.me.mdk.developmentTools_2.5.12/MDKExt.jar"/>
    <classpathentry kind="lib" path="C:/j2sdk1.4.2_13/lib/tools.jar"/>
    <classpathentry kind="lib" path="C:/SAPmi/MAM25_V30RDS/app-root/WEB-INF/lib/datetimepicker.jar"/>
    <classpathentry kind="lib" path="C:/SAPmi/MAM25_V30RDS/app-root/WEB-INF/lib/MAM25_V21.jar"/>
    <classpathentry kind="lib" path="C:/SAPmi/MAM25_V30RDS/app-root/WEB-INF/lib/mbscore.jar"/>
    <classpathentry kind="lib" path="C:/SAPmi/MAM25_V30RDS/app-root/WEB-INF/lib/mbsrfid.jar"/>
    <classpathentry kind="output" path="app-root/WEB-INF/classes"/>
When I run the application the following information message appears in nwds:
MOBILE INFRASTRUCTURE 7.0 SUCCESSFULLY LAUNCHED **********
ME started with 'FrameworkInitializer' class and user 'rdou01'
When I start the mobile client using startup.bat. I see that the classpath variables are defined in the file listofjars.txt and set during startup. In these file I added the same path as mentioned before in nwds. Also in the same order. When I start startup.bat and I check the results in the doc command box. I see that the same librarie are loaded.
Still the application behaves different. Is there something else that I can check?
Regards,
Ryan

Iphone 3G shows Apple logo when starting and stops there.

Hi, I just got an Iphone 3G 16GB yesterday from a person who had it for 10 days and did not like it. Before giving it to me me he did a general reset using the optino in the settings menu. When he gave it to me the Iphone was still doing the reset and it took 2 hours and 40 minutes to end it. At the end of the reset the screen showed the Apple logo and does not go further. All of this was done with the Iphone plugged in a power outlet to avoid interrupting the operation.
I left it on for all the night just hoping it was a very long procedure but with no results (still the Apple logo and nothing else). This morning I tried to turn it off keeping the sleep/wake button pushed for some time but id did not even shut down. The only way I found to shut it down was to to push the Home button and the sleep/wake button together for a few seconds. When I tried to turn it on again pushing the sleep/wake button it showed the Apple logo again and nothing happened.
COuld someone help me?
Thanks in advance.

Just to report that the problem was solved with Apple Support. They asked me to start Itunes, connect the usb cable to the computer, push the home button while connecting the USB connector to the Iphone. This way Itunes recognized the Iphone in recovery mode and restored everything automatically.
Now the Iphone is working perfectly.
Hope this helps.

Managed Server Error when starting via startManagedWebLogic '31' could not

Hi
in my Managed Server, in my AppDomain
i just set some Java_Option variable
bit when itry to run my server using the script,
after asking User name and Password, Server Log get open
but utimately its giving me this error, and Server is not geting started,
####<Mar 26, 2009 4:29:02 PM GMT+05:30> <Error> <Configuration Management> <HDCHARTOMR1875> <DEPEJBSERVER> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1238065142217> <BEA-150000> <An error occurred while establishing a connection back to the adminstration server http://10.108.66.34:7099 during startup. Since bootstrap succeeded check that http://10.108.66.34:7099 uniquely identifies the administration server.
javax.naming.ServiceUnavailableException Root exception is java.rmi.NoSuchObjectException: The object identified by: '31' could not be found. Either it was has not been exported or it has been collected by the distributed garbage collector.
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:70)
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:32)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:773)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:428)
     at weblogic.jndi.Environment.getInitialReference(Environment.java:237)
     at weblogic.server.channels.RemoteChannelServiceImpl.registerInternal(RemoteChannelServiceImpl.java:153)
     at weblogic.server.channels.RemoteChannelServiceImpl.registerForever(RemoteChannelServiceImpl.java:127)
     at weblogic.protocol.ConnectMonitorFactory.registerForever(ConnectMonitorFactory.java:69)
     at weblogic.management.provider.MSIService.registerForReconnectToAdminServer(MSIService.java:174)
     at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:150)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
But the same server is getting started when m starting it from console???
Any Help??
Thanks in Advance
-Kumar Varun

Check the CommonEnv and setDomain script for any mis-references. then run those scripts. check the start-up also.
Is the system having an old jdk version on it? if so remove the references from environment variables and then start the server.

Source of supply in SC shows wrong contracts when changing cocode

Hi experts,
Some details:
We are on an SRM 5.0 implementation, in classic scenario.
We have a problem when using source of supply in a shopping cart.
When we select a certain product and let the system suggest a source of supply, it gives us a list of contracts. However, when we change the company code, we would expect that these same contracts would not be visible anymore (as the R/3 contract has a company code). Even after refreshing, the system keeps giving wrong contracts.
Any suggestions?
Best Regards,
Tom

Hi. Are these backend contracts and do your contracts have plants on?
I have a feeling that SRM only uses Plant, Unit of Measure and Material group to calculate if a backend contract is valid.
If your contracts have no plants that might explain it.
BADI BBP_SOS_BADI should allow you to restrict on custom criterea though.
Regards,
Dave.

Q: Extension Manager showed wrong language when it was launched.

If Extension Manager is launched from Create Suite products' menu, it will use the locale of the product. If Extension Manger is launched in standalone mode( launching it from start menu or by double clicking or command line ), it will use the locale of the operating system. If you do want to run it in another language, you can add "-locale lang=" parameters. For example, on windows, you can run the command below to show French.
"C:\Program Files\Adobe\Adobe Extension Manager CS\Adobe Extension Manager CS.exe" -locale lang="fr_FR".

If Extension Manager is launched from Create Suite products' menu, it will use the locale of the product. If Extension Manger is launched in standalone mode( launching it from start menu or by double clicking or command line ), it will use the locale of the operating system. If you do want to run it in another language, you can add "-locale lang=" parameters. For example, on windows, you can run the command below to show French.
"C:\Program Files\Adobe\Adobe Extension Manager CS\Adobe Extension Manager CS.exe" -locale lang="fr_FR".

Itunes only shows error report when starting up

Ok so I've downloaded some songs and every time that i double click Itunes to start it up this is exactly what pops up:
iTunes has encountered a problem and needs to close.
We are sorry for the inconvenience.
     If you were in the middle of something, the information you were working on might be lost.
          Please tell Microsoft about this problem.
     We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
     To see what data this error report contains, Click here.
     Error Signature (after clicking click here)
          EventType: InPageError        P1:c000009c      P2: 00000003 (I may have added or subtracted a few 0's)
THen it says alot of stuff on the report details the tech infomation about the error report.
The error report contents includes 2 documents
C:/DOCUME~1\Janet\LOCALS~1\Temp\WERe592.dir00\iTunes.exe.mdmp
C:/DOCUME~1\Janet\LOCALS~1\Temp\WERe592.dir00\appcompat.txt
I have a Hp Pavilion Enterainment Notebook PC
Dont have much experience with computers
The problem occured after downloading a Media file from a Youtube to mp2 converter

many thanks for the detailed info, Dakota.
EventType: InPageError
A rarer one. It tends to be associated with disk/file damage.
The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, does iTunes launch properly afterwards?

Firefox shows wrong page when application opens a new window

Only fails since V4.0.0 installed.
pages that open a new window using window.open(url) sometimes produce a page from cache instead of the page to be loaded. This seems erratic. Often, failure starts after a popup window loads and is closed, then attempts to open a different popup will produce the first page contents (or the default home page) instead of the page requested. Seems as tho there is a bug in FF determination of whether to fetch page from cache or new. Tried setting '''browser.cache.check_doc_frequency''' to 1 and while that seemed to help, it did not resolve all the errant behavior.

To restore the original behavior, you could try removing the explicit site-specific permission by deleting the site from this dialog:
orange Firefox button (or Tools menu) > Options > Content > "Exceptions" button to the right of Block pop-up windows
Does that work?
Also, I don't recognize this part:
''At the bottom of the window would be the URL address(es) of the popup page(s), so that if I wanted to access a page, I could simply click on the address and a new tab would open with the new page.''
Oh, wait a minute, I just reviewed your "More system details" list again and it appears that you have a custom pop-up handler:
* Extension: Adblock Plus Pop-up Addon 0.7
* Modified setting: privacy.popups.showBrowserMessage: False
So if the above reset doesn't resolve it, you might need to review the add-on's settings in case it has its own list.

HAVE CHOSEN WRONG LANGUAGE WHEN STARTING UP IPOD 1ST TIME - HELP!!!???

I bought my son an Ipod Nano for his b/day. When setting it up after charging the battery (which apparently shd have taken "up to 3 hours" but was still saying "do not disconnect" some 8+ hours later!!!!) we accidentally selected what looks like Japanese or Chinese as the language instead of English - so we can't use it as we have no idea what's on the menu. Can anyone please tell us how to put this right???

To change the langauge, see this -> http://docs.info.apple.com/article.html?artnum=60956
For "Do Not Disconnect", connect the iPod and select it in iTunes.
Select the Summary tab.
Untick *Enable disk use*.
When set to autosync your music, it will sync and eject.If you have *Manually manage music* ticked, you will have to eject it yourself.

Time and date showing wrong time when set on auto since 4.1 update

hi since i updated my 3gs to 4.1 my time and date have changed by about 1 and a half hours and afew days before. i can change it manually but i dont understand why this has happened. has this happened to anyone else?
can anyone help? or am i just best to wait till the next update?

Me too.
Second time I've been late to work in two weeks thanks to Apple ** programming!
First time when I upgraded to 4.1 and the alarms stopped working if they were set to go off every working day.
Then again today when the time unaccountably rolled back to be Sunday the 7th at 5am instead of WEdnesday 10th at 9am. Waiting for the day I'm out of contract on this rubbish so I can switch to a phone with a decent OS!
Message was edited by: twixPanther

Terminals show wrong Chars when started via Wmii-Hotkey!

Similar Messages

Maybe you are looking for