Flex and roll-over pop-ups.

My application is similar to a map with roll-over/roll-out popup boxes. Instead of a map, it is a process "chart" with about 50 "buttons" (in AS3 they are dynamic MovieClips) in about 50 different charts. In the end there will be about 2500 color-coded roll-over/roll-out popups in 50 different "pages.", each with text and two "buttons" to launch a SWF or a PDF.
Been learning Flex on and off for a year or so and I'm hypothesizing that Flex would make this app more maintainable and possibly more achievable. Can anyone respond in general to the popup and maintenance issues?
Thanks.

Thanks for your input. It was helpful to know that it is probably doable - at least seemingly from my description. As I "mess around" in FlexBuilder, I can see that it will be very doable and probably more so than simply using Flash/AS3.
By the way, I used the word "chart" a bit loosely. My application more resembles color-coded columns, each with a handful of text lables that act as Roll-Over buttons with textual information, but that also launch an interactive instructional SWF or a PDF (for that particular subject). I'm now wondering if I should use a drop down "something or other" to give the learner an option to play the swf, or get the PDF, then use a tool tip for the textual information?
Much thanks!
Doug Edwards

Similar Messages

Creating an interactive CV: mouse over / roll over pop ups, embedded documents and videos

Hi everyone,
I am pretty new to Adobe Acrobat Pro and new to this forum (1st post here!). Greetings from Spain... and apologies for grammar mistakes and misleading explanations (in advance). I have been checking this forum and googling quite a bit, but I do not get to many conclusions (maybe I sleep few due to our baby!).
I want to create an interactive CV with the following characteristics:
1) CV in 1 page in a PDF document (no problem here!)
2) Hyperlinks in the text which open embedded files (pdf of others) hidden to the viewer but which are in the pdf document. Possible? (I want the recruiter to receive just one file). Even better if they could be open in another window (doubt it).
How could it be done? I try add documents and they are attached at the end, so the original pdf gets to have more pages, all viewable.
3) Furthermore, mouse over / roll over pop ups which show you a preview of the file you may open clicking the hyperlink, for a quick view of the content.
I think that this may be done, but using other programs, like InDesign. I just try to add a document, but it's sort of a link to a document in my computer. I may add pdf, pps files.
4) Even more, would it be possible to embed a video which would open in a new window? If not, I tried to add a link to youtube and there was a warning as "this program tries to open a window, if you trust the owner... " (similar safety message) and the very last thing I want the recruiter to have to decide whether to decide to watch it or not.
I know its a questions in its very first stages, but the big point is to know if/what it is possible to do, so that I search in the right direction.
If you have any idea or advice (even if not related to PDF pro, of course), just please let me know.
Thanks a lot in advance. I hope this thread may help others.
Cheers,
tebanseeker

Hi Dave,
Thanks a lot for the input.
(3) Right, I could not find either a way using just Acrobat Pro (I'm using XI). Sad thing that you confirm it... But it looks like you may do it using other programs on the PDF, but I don't know to use them. You may take a look at this:
https://www.youtube.com/watch?v=HEyJuT8SSME (popup rollovers using Illustrator)
https://www.youtube.com/watch?v=YOVRMVdZbVE (popup rollovers using InDesign)
(4) I think that embedding would make the file to big, so I may opt for the hyperlink to youtube option, even if I deeply dislike that message, although youtube is a reliable source for the viewer.
Any other input is very welcome. I am pretty illiterate in the field!
Have a nice weekend,
tebanseeker

How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

# Question
How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

Chris CA wrote:
Did you createa smart playlist? It's purple with a gear icon.
And you set the criteria to
Match rule:
Date added is in the last two weeks?
I tried it, but couldn't get it to work. I think I had trouble with the Rule. I put a Rule in as follows: Data added in the last five hours? I added music (data) but nothing appeared in my Smart Playlist. Oh yes - I named the playlist: Recently Added.
What did I do wrong? Is it necessary to have a question mark at the end of the Rule? I couldn't find anything on how to create a Smart Playlist in Help. There is stuff in there, but it does not go into much detail, i.e., nothing on the proper wording of the Rule.

Guided Simulations and roll-overs

Hi folks
I'm in need of some help.
I'm a follower of the Tell me, Show me , Help me ,Let me learning flow.
I'm creating some trainig for a browser presented software product.
I've already created
1) a nicely interactive explanation of the process that they will follow (The Tell me)
2) a step by step demonstration that explains what is being done.
What I'm now trying to create is the 'Help me' portion where I'll be looking for the learner to do the right thing with the mouse and keyboard.
My dificulty is that much of the information that the product provides is by way of mouse over pop-ups.
I can recreate these easily with either Rollover images or rollover slidelets but I'm not clear how to make the module pause and continue when I want it to.
The flow I'm trying to get them to follow is
Hover over portion 1 on the scree to view the popup that comes from there.
Based on the content there, go to another portion of the screen and check the information there.
Click on a third portion of the screen.
Check some displayed information
Based on the content there go to another postion of the screen where a checkbox appears on mouse over.
Select the check-box.
.... and so on.
Any tips?
Thanks
Alan

Hi Alan,
Think you'll need good planning and probably some advanced actions. The easiest way will certainly be to have the content distributed over different slides. But some of the actions you describe (like rollover) will not be able to trigger an action to Jump to the next slide, unless you use a Rollover Slidelet because that object has two possible events that can trigger an action: On Rollover, On Click.
If everything is really in an imposed sequence, putting the objects on the timeline in sequence could already solve part of your goal. And to avoid the playhead continuing when clicking on an interactive object like a click box, you can replace the simple action by a standard advanced action:
http://blog.lilybiri.com/why-choose-standard-over-simple-action
For the 'Based on the content there go....' you'll need branching to another slide; I would not recommend doing that on the same slide at all.
These are only some ideas, because your question is both very complicated and vague
Lilybiri

Link scanner agent and loader agent pop ups that won't go away

Link scanner agent and loader agent pop ups won't go away. How do I get them to stop?

the same thing has been happening to me for a while, it doesnt seem to affect anything but i would like to get rid of it, i feel like it might be a bug.

Text buttons and roll over

Hi
I have text buttons and want to make the text bold when the user rolls over. (this is a menu)
Are there any other ways besides having the text as a master slide and then click boxes and roll overs, I realise I can do text buttons but there is a small icon that I need at the front of the text which will also need to be clickable.
thanks

Bold only when rolling over? That means that you will not be able to use it for HTML5 output? Only SWF is OK?
My first idea is to use the EventHandler widget of InfoSemantics (not free but you can download a trial version), because it can create a rollover event for your text button. Anyway you'll have to create a transparent text container (shape or caption) that has the Bold Text and appears when rolling over. If you don't want to go with that widget, you can simulate the same by using the Rollover slidelet (you'll need only the Area, can drag the Slidelet itself outside of the sldie), that has a rollover event that can trigger an action to show that previously hidden transparent text.
Welcome to the forum, just one tip: mention the version number (exact number, which you find under Help, About Captivate) when you post a question.
Lilybiri

Can you turn off the Yellow and Black cursor pop ups?

Since 10.4.x I have noticed that these little pop ups that you get when the cursor is over something that has info are more frequent and are getting in the way. I love the idea but, they either don't pop up when I need them, don't stay up long enough to read large areas of text, or get in the way of moving a URL to a menu bar of my browser and I have to wait for it to go away before the address will copy.
I think I saw something somewhere about this but can't remember. It there a way to turn these off?
TIA

Hi
The term I think you're looking for is "tooltips". It seems that there is no obvious way of universally turning them off. An application's developer decides how they are implemented for the indiviual application. I notice that in Opera, my browser of choice, I can just turn them off in the preferences. The same does not apply for Safari and, by the looks of it, most Apple applications including the Finder. See the discussion Disabling "tooltips" in Safari...... for a little more info.
Matthew Whiting

Slicing and roll over effects

I am trying to create a roll over image effect that is giving
me a hard time. I have a picture of apple pie, with 6 slices. I
wanted to have a pop up window display with the ingredients for
each slice a person rolled the mouse over.
(6 different slices making one whole pie apple, blueberry,
cherry, etc you get the idea). When I tried this in image ready, I
had the slices cut up, but the pop up window was larger than the
actual slice, so only a portion of the info displayed. Is there a
way I can create a slice and have the roll over effect or pop up
window display larger than the hotspot slice? Its kinda hard to
describe, but I think you can understand what Im trying to do. The
ingredients list is much larger then the pie slice hotspot.
I cannot get my brain around how to make this happen. I know
theres a way, I just dont know how.
Thanks for any advice on this.

A rollover replaces one image with another. You can do a
standard rollover, replacing the image your mouse rolls over or a
disjoint rollover, where you replace a different image.
A pop-up generally requires a click and is done in
JavaScript. In the pop-up window, you can specify whether or not
you have scroll bars.
You might also check into setting overlapping divs and
changing the visibility of the layers depending on mouse movement,
but...that's probably going to require you to code the JavaScript
by hand.
Anyway, what is it you want? A rollover image or a pop-up
window?

I am using Greasemonkey extension to play Kingdoms of Camelot and today the pop-ups used to ask other members for help are so far to the right that they can't be used.

When I first signed on the page kept refreshing every 3-4 seconds. Another player gave me some URLs to download and it fixed that problem but now the pop-ups that are part of the game are loading halfway off the page to the right and the advertisement section on the right is significantly wider.

You might want to use the discussions tab for that script so the author can assist with the issue. I'm not sure which script it is -- this Google search retrieves over 1000 results!
[http://www.google.com/search?q=site%3Auserscripts.org+inurl%3Ashow+kingdoms+of+camelot site:userscripts.org inurl:show kingdoms of camelot - Google Search]

Avatars and Profile Picture Pop-ups

When I hover over an avatar in a discussion, I get a little popup showing bits of the poster's profile, including a picture. But it seems to be the avatar yet again - wouldn't it make more sense if the profile popup showed the profile picture? That way, the avatar does its duty of providing a quick visual indication of the poster, whereas the popup will show you what he looks like if he's put an image of himself on his profile. Using resources to load the same image twice in just about the same place on the page strikes me as daft. What do you think?
Noel

I think all the pop-ups are bloody daft and probably slowing down this apology for a forum.
That's what I think!

I Finally Managed to get rid of "Mackeeper" and "Dynamic Pricer" POP Ups

This is actually not a question.
I was suffering for months now...It became totally impossible for me to open Safari without immediately being submerged by "Mackeeper" or "Dynamic Pricer" pop-ups.
I searched for a solution to get rid of Mackeeper for months without success: ( Please refer to the link for better description of the problem Do not install MacKeeper)
I totally had given up finding a solution for Mackeeper, until i accidentally came across a Free SW (adware) called AdwareMedic while I was trying to get rid of "Dynamic Pricer".
It actually solved both my problems ...
Am so excited that I decided to share this great finding.
I hope that those who have been infected by these malware will appreciate the hint.
Cheers

emoband wrote:
i accidentally came across a Free SW (adware) called AdwareMedic while I was trying to get rid of "Dynamic Pricer".
Thanks for the tip! However, just to clarify, AdwareMedic is not adware - it is an anti-adware app. Adware is the name for the software that injects ads into your web browser, and it is that software that AdwareMedic can be used to remove.

My Foxfire keeps freezing during use, and there are pop-ups that appear during each selection of an application

What more do you need. Foxfire keeps freezing on my computer and it is sending pop-ups when any application is triggered.

It sounds like you are having problems with pop-ups. Most are adds
but a few give you false information claiming something is
out of date, software needs to be installed, blaaa blaa, blaaa. Go to the
'''''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]'''''
and find a good add / popup blocker.
Let us know how things work out. '''''BTW''''', there is an update for Firefox.

Can I make the fonts bigger in the status bar and the notification pop ups?

I'm really struggling to read some of the pop ups. And the status bar is almost impossible. Why is the font smaller on an iPad then an iPhone? I can't read the tabs either. The zoom feature helps but come on already. I've made the fonts bolder but they are just too small. I'm 54 and have worn glasses since I was 6 and there are several areas on this device that are nearly impossible to read. Any help would be appreciated. Thanks in advance.

I've done computer support for many years. Recently moved to a retirement community where the residents have computers of all varieties, and much less trouble with macs than with PCs BUT Safari is terrible for older people with its tiny print, black on dark gray. Latest versions of Chrome seem to crash a lot, so I'd like to encourage them to use Safari, but the tiny print on tabs is a stumbling block. Is there any extension or plug-in that will help with THAT? I know how to increase font size on web sites, that's not the problem. It is the specific Safari tabs that are the problem.

Hover over / pop ups

I'm sure many moons ago with DW4 this was a standard feature, but can I get it to work now? No I can't. Maybe I have just forgot the basics.
I would like to create a calendar and on that calendar there will be a few small images when events occur, birthdays, anniversary's etc.
Now what I wanted to happen was 'on mouse over' a pop up flag would appear with information relent to the days event(s), but I can't seem to get it to work.
I can do a pop up message but that requires manually closing, I'd like something which pops up on mouse over and automatically disappears on 'mouse out'.
I think that I may have forgotten the fundamental basics, I'm sure that I have done this before.

Why don't you use a real Calendar app for this?
Easy PHP
http://www.easyphpcalendar.com/demo.php?mo=8&yr=2010
Google Calendar
http://code.google.com/apis/calendar/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How do I get rid of Mackeeper and other random pop-ups?

Yes I am aware that i may downloaded something bad while trying to watch a movie. I have read a lot of comments of how to get rid of them and I some how can't get rid of it. I cleared my extensions, blocked pop-windows, and trashed every file from my finder applications. Any help? Please and thank you! (I have a Macbook Air if that helps)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 -\\t 'PlistBuddy -c Print' );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${p[50]}"'%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n '"${p[50]}"'mod date: %s\n '"${p[50]}"'checksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\/|\.prefP/&&/\/(Lib|usr).+\/(.+\.lproj|Contents|Info\.plist|Resources)|\.framework$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/([A-Za-z_]+\.lproj|Contents|Resources|Versions)(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/\.(component|mdimporter|plugin|qlgenerator|saver|wdgt)$/p;' 's/Pr.+n //p' ' BEGIN{FS=":"};{ if($1~/\.kext$/) { s=system("'"${p[51]}"'\\ :OSBundleRequired "$1"/*/I*|grep -q Sa");if(!s) $1=$1" S";if(!$2) $2="N/A";printf("'"${f[4]}"'",$1,$2); } else print;} ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${p[51]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${p[50]}"'"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(By|m): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls kextfind );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} '-nl -print -print-diagnostics' );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Bad\ kexts );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { Q=5;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo true;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=No;((v['$((i+1))']==0))&&v=;};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};C4() { echo "Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;B0&&{ D13 5 5 69 1;D13 5 54 30 56;C4;D23 5 14 12 14;C4;};D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;C4;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;C4;};D22 12 44 54 45;D22 12 39 15 21;D13 40 58 32 57;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;C4;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;C4;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 0 31;((i))&&{ B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;};C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;C4;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;C4;} 4>&2 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be a series of messages in the Terminal window like this:
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The messages won't be spaced equally apart in time, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the last message you saw. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Flex and roll-over pop-ups.

Similar Messages

Maybe you are looking for