Flex origin point issue

I have to use Math formula to calculate some positions.
But I don't know in the layoutBase class where is the origin point?
I mean the (0,0) point is at left-top corner or the center of the screen ?

topleft

Similar Messages

X Y origin point in Illustrator

I need the x, y origin point to be in the lower left corner. In the past I was able to go into the Adobe Illustrator setting and change some code so when I double clicked in the left corner of the ruler it would switch my origin to lower left. Now there is nothing in the setting folder because this program is on the cloud. How do I fix the issue now?

In the past Illustrator's x y origin was in the lower left hand corner. In CS6 they changed this to the upper left corner but we were able to change Illustrators setting so we just had to double click in the left upper corner of the ruller and it would set back down to the lower left. Our compnay has templates depending on the setting to be this way. It would be a pain to drag every files x y origin each time. Now since Illustrator is on the cloud the seetings folder no longer exists on our computers to fix this.

How to realise a point track application with user-defined original point?

hi,
I am developing a simple point track application, it is not the same as the traditional mouse cursor tracking problem and i get really confused.
there are two pictures to describe my application：
the first one descirbes the default state of my application：
1.red circle is the point that user can move;
2.white cross is the original point;
3.blue circle is the range of red circle motion
the second one describes the track process of my application：
1.user can move the red circle with a click of mouse button in any place within blue circle;
2.application should show coordinates of red circle relative to white circle in real time;
3.once user release the red circle(or the button of mouse), the application should return to its default state.
I realy do not know how to realise the key parts of this application, like showing a circle in panel and connecting the points within it to the labview code? can anybody give me some suggestions? thanks a lot
Attachments:
default state.png ‏10 KB
action state.png ‏12 KB

Attached is a very rough implementation of what you're looking for. Add a "draw (white) line" after the "draw circle" function to make the crosshairs persist when the circle is near the center. Prob want to delete the crosshairs from the blue circle picture (currently contained in a constant) to avoid drawing them twice and them not quite lining up. All of the constants are empirically determined and need slight adjustments (e.g. centering of the red circle when mouse is up, etc.). They will need further adjustment if you resize the blue circle picture.
Not sure what you mean by connecting the points within the LV code. I suspect you're using the eyeball to drive an XY stage or such and need to use the red circle coordinates to moderate the travel speed?
Attachments:
Untitled 1.vi ‏25 KB

How can you globally keep the existing origin points in CS4 files.

Is thre a way to globally keep the existing origin points in CS4 files.
I understand that there are now Global Rulers and Artboard Rulers in Illustrator CS5 -
...but ALL the origin points in our current Illustrator documents (saved in CS4) that we use as templates for new work (last count, over 300!) and in all archived completed work have all moved to the top left of the page. All these documents were saved with different origin points to define non printing objects on the page such as our custom slug line and colour bars. Do we have to open and re-save each document with a new Global origin.

I am in a similar situation, but with thousands of Illustrator files with 0,0 origins placed at the bottom left of objects. Now when I open a legacy document and change to global rulers, the Y axis above 0 are now negative values, they were positive in CS4 and earlier. My X values are correct.
Is there a way to reverse the rulers so I don't have to enter negative values for everything above 0? Or is this a feature request / bug fix that needs a lobby?

Where is original point of Z axis in a stereo vision system?

Hello, everyone
I use LabVIEW Stereo Vision module. After I calibrate my stereo vision system, I want to verify the accuracy of my system. I can get every point`s depth in my picture, but where is my original point of Z axis?
In the newest NI Vision Concepts Help, it is written that NI Vision renders 3D information with respect to the left rectified image such that the new optical center will be at (0, 0, Z) position. Is the original point of Z axis is on the CCD of left camera or the optical center of my left camera`s lens?
So anyone can help me ?
CLAD
CAU
Solved!
Go to Solution.
Attachments:
未命名.jpg ‏63 KB

Hello,
I would say that the coordinate system origin is at the optical centre, that is the camera's projection centre.
So, yes, the optical centre of the left camera's lense. This seems most logical to me...
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

Return the user to the original point in the template after making selectio

Hi,
Can u suggest one solution for this problem
Return the user to the original point in the template after making selections/returning back from the select views . While using the select list in middle of the page or some other point of the page, the page will be getting refreshed and it will be returned to the start of the page. My requirement is make it return to the same position after the refreshed page.
Thanks,
Ramky

Hi Vikas,
I have done the same setup as your sample application. I am using
 
Branch URL : 
f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.::::::#&P1_ANCHOR.
 
Computation for P1_ANCHOR: 
case :REQUEST
WHEN 'P1_A_SCN' THEN 'P1_A_SCN'
ELSE NULL
end
 
Anchor Code in region header for item P1_A_SCN: 
< a name="P1_A_SCN">< /a >
 
When I use the select list it wont come back to the region where the select list P1_A_SCN is located. I checked for the value in P1_ANCHOR in the session state and it correctly shows as 'P1_A_SCN'. But the page URL after the submit does not show the anchor like 
......f?p=206:1:14418154115565883485::::::#P1_A_SCN it shows 
......f?p=206:1:14418154115565883485::::::
 
When I but the branch URL as 
f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.::::::&P1_ANCHOR. without the '#' it shows the page URL as 
......f?p=206:1:14418154115565883485::::P1_A_SCN
 
Do you what is causing the anchor to not show up in the page URL and thereby the intra page branch to not work.
Thanks,
Swaroop

Dragging rotated and nested symbol causes registration point issues

Has anyone noticed registration point issues when trying to drag a nested symbol or if you place a symbol on the stage and manually roated it with the rotate tool?
I have been tryig to master the science of this and am still having a helluva time. It looks like it thinks your mouse is the 0,0 point and instantly jumps the symbol you are attemping to drag.
Has anyone else noticed this and figured out a workaround?
I noticed if I dynamically place the symbol it doesnt have this issue but I would prefer to not be forced into that

Yes there is. After you have paused at the IN-point, hit shift + left arrow, this will mark the IN-point. Play to OUT-point, pause, shift + left arrow and the clip is selected from the two points.

Photoshop Rulers not resetting to origin point.

Hi - I have PS CS5 and adobe says that in order to reset Rulers you need to 'To reset a ruler’s origin to its default value, double-click the upper-left corner of the ruler.'
But when I try that nothing happens. I have tried resetting my workspace as well but still not working. I would really appreciate if someone can help out - thanks.

I have a similar problem. My guides never adjust to the new origin point I set by dragging from the top left corner. The guides just use use document edges as origin points.
I have reset my preference file but this hasn't helped. I'm using Photoshop CS6 on Mac.

Vanishing Point issue - cs6

Why does cs6 or the cs5 stop working when I use the vanishing point. i have a file showing an open dictionary. I am mapping the opened page in this dictionary. The page has a curved profile. To this curved profile I would be pasting another seperate page (of the same size) from another file. My grid size is about 100. I am using the angle adjustment to help map the curved profile.

Good day!
Why does cs6 or the cs5 stop working when I use the vanishing point.
What exactly do you mean?
Is there a crash? If so someone else might be able to get relevant information from the crash report.
Could you please post a screenshot or lores?
Might a Warp on a Smart Object not also work? (Naturally this does not address the Vanishing Point issue itself.)
Regards,
Pfaffenbichler

My curser will snap back to it's origin point after a second or so

My curser will snap back to it's origin point once I finish moving it.
Does anyone know what the problem is?

Try resetting the PRAM. Also, the device may have failed.
Barry

Setting a different "Arrange in Front" origin point?

When selecting 'Arrange in Front' (click the Window menu, press the Option key, and "Bring All to Front" changes to "Arrange in Front"), the window origin appears to center the arranged windows in the middle of the screen. This is in the Safari app, but it works in other applications.
The menu option seems to calculate the overall size of the rearranged window group, and centers the group in the middle of the screen.
I'd like to be able to set the origin to the upper left corner of the screen, instead of the middle of the screen.
Is there a plist or something to edit to spedify the origin point for this action?
Thanks in advance!

Yes he would have to change his code. I am just used to using "S_" and it is the standard Oracle naming convention for synonyms. (Also it makes it clear that you are referencing the table via a synonym rather than hitting the table directly.
Why not encode all table names in an abstract class.
Eg
package utils;
public class TableNames
public static final String TABLE_NAME1 = "S_TABLE_NAME1";
public static final String TABLE_NAME2 = "S_TABLE_NAME2";
//etc etc
This class can then be used in the building of sql statements. If the table name happens to change at any time then a change is only required in TableNames class.

Flex PHP Wizard Issues (Is Flex/PHP ready for prime time)

I have been designing a website using Flex. I thought of using Flex form many reasons, but one was to reduce the number of languages used in the development process. I am going to be hosting at Godaddy so I thought I would try PHP. I normally would use Java, but Flex seems to want Enterprise Beans and Java Remote Objects which cost to much and would probably not work on Godaddy. I started out with MAMP on a Apple computer and have design 60% of my application, when I started noticing as the database go larger, I started getting communication errors with the MAMP version of mysql. So I installed MySQL and and started using Apache and PHP that comes with OSX. The communication errors are increased.
Any suggestions? I am at the point, if I can find a proven programmer, with GoDaddy/Flex/MySQL/PHP and Java experience to help answer some question, I think I can come up with contract dollars.
First question is Flex ready? or is this an issue with PHP?

have moved this thread from the ADDT forums to the Flex Data Services forums

Email start point issue com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error

Hi,
I have configured email start point process. While deploying and invoking the process it is not showing any kind of error. But when i send mail to configured SMTP server i recieves a mail saying
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:hadshafds
Date Sent:Wednesday, May 25, 2011 12:22 PM
Body:
Attachments:
Why i am getting error. I have tested the pop3 and smtp mail server using send and recieve activity. But when i send some mail to configured server to start a activity it replies with a mail that there is some error.
Please help me out with this issue.
Regards
Sunil

Hi Diana,
i tried to add the user and gave invoke access but still having the same issue.
Please find the following log error
19:24:20,633 ERROR [STDERR]     ... 60 more
19:24:20,635 ERROR [EmailResultHandlerImpl] Internal error.
19:27:50,472 ERROR [EmailWriterImpl] EmailWriterImpl error : Unknown SMTP host: testSebi
19:27:50,474 ERROR [STDERR] javax.mail.MessagingException: Unknown SMTP host: testSebi;
nested exception is:
        java.net.UnknownHostException: testSebi
19:27:50,480 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1280)
19:27:50,482 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
19:27:50,484 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:275)
19:27:50,486 ERROR [STDERR]     at javax.mail.Service.connect(Service.java:156)
19:27:50,488 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.EmailWriterImpl.send(EmailWriterImpl.java:2 60)
19:27:50,490 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
l.java:529)
19:27:50,494 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.write.EmailResultHandlerImpl.handleFailure( EmailResultHandlerImp
l.java:425)
19:27:50,498 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.handleFailure(EmailSc anJobImpl.java:621)
19:27:50,500 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.scheduler.scan.impl.AbstractScanJob.invokeJob(Abstract ScanJob.java:142)
19:27:50,502 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.processInputs(EmailSc anJobImpl.java:165)
19:27:50,504 ERROR [STDERR]     at com.adobe.idp.dsc.provider.service.email.impl.scan.EmailScanJobImpl.execute(EmailScanJobI mpl.java:102)
19:27:50,506 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor509.invoke(Unknown Source)
19:27:50,508 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
19:27:50,510 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
19:27:50,511 ERROR [STDERR]     at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
19:27:50,514 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
19:27:50,516 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,518 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.jav
a:53)
19:27:50,522 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,524 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java
:74)
19:27:50,528 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBe
an.java:357)
19:27:50,531 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapte
rBean.java:227)
19:27:50,535 ERROR [STDERR]     at sun.reflect.GeneratedMethodAccessor332.invoke(Unknown Source)
19:27:50,537 ERROR [STDERR]     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
19:27:50,539 ERROR [STDERR]     at java.lang.reflect.Method.invoke(Method.java:597)
19:27:50,541 ERROR [STDERR]     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
19:27:50,543 ERROR [STDERR]     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
19:27:50,545 ERROR [STDERR]     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
19:27:50,547 ERROR [STDERR]     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
19:27:50,551 ERROR [STDERR]     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
19:27:50,553 ERROR [STDERR]     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
19:27:50,555 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
19:27:50,557 ERROR [STDERR]     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
19:27:50,559 ERROR [STDERR]     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
19:27:50,561 ERROR [STDERR]     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
19:27:50,563 ERROR [STDERR]     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
19:27:50,565 ERROR [STDERR]     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
19:27:50,567 ERROR [STDERR]     at org.jboss.ejb.Container.invoke(Container.java:960)
19:27:50,569 ERROR [STDERR]     at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
19:27:50,571 ERROR [STDERR]     at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
19:27:50,573 ERROR [STDERR]     at $Proxy205.doSupports(Unknown Source)
19:27:50,575 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
19:27:50,577 ERROR [STDERR]     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
19:27:50,580 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,582 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:
55)
19:27:50,586 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,588 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
19:27:50,590 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,592 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
19:27:50,594 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,596 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
19:27:50,598 ERROR [STDERR]     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
19:27:50,600 ERROR [STDERR]     at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
19:27:50,602 ERROR [STDERR]     at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
19:27:50,603 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
19:27:50,606 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
19:27:50,608 ERROR [STDERR]     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
19:27:50,610 ERROR [STDERR]     at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
19:27:50,612 ERROR [STDERR]     at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:87)
19:27:50,614 ERROR [STDERR]     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
19:27:50,616 ERROR [STDERR]     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
19:27:50,618 ERROR [STDERR] Caused by: java.net.UnknownHostException: testSebi
19:27:50,620 ERROR [STDERR]     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
19:27:50,621 ERROR [STDERR]     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
19:27:50,623 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:529)
19:27:50,624 ERROR [STDERR]     at java.net.Socket.connect(Socket.java:478)
19:27:50,626 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
19:27:50,627 ERROR [STDERR]     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
19:27:50,629 ERROR [STDERR]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1250)
19:27:50,631 ERROR [STDERR]     ... 60 more
19:27:50,633 ERROR [EmailResultHandlerImpl] Internal error.

Flex 2-14 issues

Dear Users,
I strongly advise you not to consider buying the Lenovo model Flex 2-14 or any Lenovo machines at all.
I bought one recently and the screen has yellow spots in the corners and on the sides from day 1. Also the laptop rattles thanks to its flexibility I guess. The annoying rattling noise just drives one crazy.
I thought these problems will dissapear, but I waited in vain, they are just getting worse. Well, I am covered by warranty, so I thought no problem, even though I am out of the US where I purchased it online. But calling the customer service and struggling to get the right person, who eventually refuses to fulfill the Lenovo warranty obligations on the basis of the fact the receipent's first name is different from mine (though we do have the same family name, as we are family). Then after some time, the person agrees to consider the possibility of repair. And now they ask million questions and put different conditions to delay the return for repair, and just to make us so sick and tired of them, that we don't want to call them anymore, especially given that we don't have time to waste on the telephone. So the Customer service does everything just to avoid accepting for repair the defective laptop they sold us. I am deeply dissatisfied with the quality of Lenovo products and with the attitude of their staff.
Moderator comment: Post split out of the Knowledgebase and a new topic created. Subject edited to match. Was: Re: New forum feature: Search before posting new topics

hi Swtess,
Welcome to the Forums.
Depending on the SKU, the Flex 2-14 can be powered by either an 802.11AC card and some are onlg b/n (see page 79 of the HMM for more info).
- Link to picture
A b/n or b/g/n wireless card will not be able to detect a 5Ghz wireless access point as these type of cards can only detect and connect to a 2.4Ghz band.
More info:
Wireless: Determine if Computer Has 5GHz Network Band Capability (Windows)
Laptop wireless networking options: 1x1 vs 2x2
As for the battery, this review shows that the battery can up to the following scenarios:
If you're getting 2hrs during WiFi surfing, try the following:
1. Set the power plan to Power Saver and screen brightness to minimum.
2. If you have devices plugged-in to the USB port, temporarily unplug them and observe
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Flex Builder License Issues

The flex builder serial number that I have works when I
install it as standalone but doesnt work when I add it as a plugin
to my existing Eclipse Installation.
Anyone have any information or knowledge that can help me?
Thanks
Prem

You mean you can't use your FB2 anymore, or your FB2 license
does not work with Flex 3 beta? I think you can point Flex 3 toward
the Flex 2 or 3 SDKs, so maybe a setup issue?

Flex origin point issue

Similar Messages

Maybe you are looking for