FLV movie not sending "complete" event

As per the Macromedia Media Class page, the following is an
exerpt:
link :
http://livedocs.macromedia.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context= LiveDocs_Parts&file=00003771.html
I've noticed that, with certain FLV files, playing completes,
but the "complete" event is never sent.
This condition is distinguished in a few ways: the playhead
comes almost to the end of the movie, but not quite there. Although
actual playing of video stops, the MediaDisplay component indicates
that it's still playing. The playheadTime reads the same with every
request. If you manually move the playhead to the end while in this
condition, the "complete" event will finally be sent, but this is
the only way it will happen.
This is probably a flash bug, but all users who depend on
end-of-movie events or cue points should be aware of it, and
they're most likely to see such a detail here, on this page.
I haven't found any further information about this, but it is
100% reproducible for me based on the FLV used. Possible
workarounds: write a function called at intervals to detect the
condition...
--> Anyone know how to solve this? Very frustration that
only some FLV's exhibit this bug.

Rothrock,
> David, what is your issue with the NetStream.onStatus?
This event produces information that indicates "Data has
finished
streaming, and the remaining buffer will be emptied" (AS
Language
Reference). This may signal the end of a stream, which gives
us a way to
check for the end of a file. Of course, it may also indicate
an onslaught
of peripheral network traffic -- i.e., not the end of the
file at all -- and
I haven't been able to determine that conclusively yet.
Mainly because I
need a time machine to pack more hours in the day.
In another thread, recently, FlashTastic indicated this was
fairly
reliable, which is good to hear.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=288&threadid=1144302&hi ghlight_key=y&keyword1=stuck%20on%20the%20switch%20statement
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Similar Messages

FLV movie not playing in webpage

Hi,
I need help here as I'm completely baffled.
I have created a. FLV movie which is placed in a webpage
created in Dreamweaver 8. I created the FLV in Flash 8 by importing
the Video and creating the Controls etc and placing all the files
in the same directory as the page.
On my own home computers, and also from the Hardrive, the
movies work fine.
When placed on the work intranet site, the page loads, but
the FLV file is just a white blank page.
Is there something that needs to be chnaged on the Webserver
to play FLV's or am i missing something here.
Any help would be appreciated.

Update:
Still cant figure out why the FLV file is a white box, but,
If I open the html page directly on the server it plays perfectly.
It seems to fail when opened from a linked page which is one
directory back.
for example I have a list of links on a page.
link one
link two
link three
each of these links target the html page in
Folder1/linkone.html
Folder2/linktwo.html
Folder3/linkthree.html
Each folder has its required flv file and swf file beside the
html file.
If I doubleclick the linkone.html file directly from the
directory, it works fine.
But if I click the link from link one.html the page loads
fine but the movie stays white.

Not receiving COMPLETE event in URLLoader

Hi:
I'm querying a web application in a remote server through XML files and receiving answers in the same file format. Until now, sometimes I received a connection error:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://server/Services/startSesion.com
at reg_jugadores_fla::MainTimeline/queryGQ()
at reg_jugadores_fla::MainTimeline/reg_jugadores_fla::frame1()
When this occurs, trying to access the services through a web browser, there's a test page where you can try queries, returns a "500 Internal server error". I managed that problem adding a listener to catch the error:
xmlSendLoad.addEventListener(IOErrorEvent.IO_ERROR, catchIOError);
But since yesterday I can't connect anymore using Flash while it's possible to access the test page. I'm not able to talk to any support guy as the company is closed for vacations! I added listeners to try to know what's happening and this is the result in the output window:
openHandler: [Event type="open" bubbles=false cancelable=false eventPhase=2]
progressHandler loaded:154 total: 154
httpStatusHandler: [HTTPStatusEvent type="httpStatus" bubbles=false cancelable=false eventPhase=2 status=200]
AFAIK, status=200 means OK but why the COMPLETE event isn't dispatched?. So, is there anything I can do or just wait until the tech guys return from the beach?
Thanks in advance
queryGQ(sessionURL,sessionQS); // Start session
stop();
function queryGQ(url:String,qs:String):void {
var serviceURL:URLRequest = new URLRequest("http://server/Services/"+url);
serviceURL.data = qs;
serviceURL.contentType = "text/xml";
serviceURL.method = URLRequestMethod.POST;
var xmlSendLoad:URLLoader = new URLLoader();
configureListeners(xmlSendLoad);
xmlSendLoad.load(serviceURL);
function configureListeners(dispatcher:IEventDispatcher):void {
dispatcher.addEventListener(Event.COMPLETE, loadXML);
dispatcher.addEventListener(Event.OPEN, openHandler);
dispatcher.addEventListener(ProgressEvent.PROGRESS, progressHandler);
dispatcher.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
dispatcher.addEventListener(HTTPStatusEvent.HTTP_STATUS, httpStatusHandler);
dispatcher.addEventListener(IOErrorEvent.IO_ERROR, catchIOError);
function openHandler(event:Event):void {
trace("openHandler: " + event);
function progressHandler(event:ProgressEvent):void {
trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
function securityErrorHandler(event:SecurityErrorEvent):void {
trace("securityErrorHandler: " + event);
function httpStatusHandler(event:HTTPStatusEvent):void {
trace("httpStatusHandler: " + event);
function ioErrorHandler(event:IOErrorEvent):void {
trace("ioErrorHandler: " + event);

Hugo,
View may not fire events. View may call method on other controller (component / custom) and this controller fires event.
You are absolutely right: in WD only instantiated controllers receives the event, event itself does not cause controller instantiation.
The only controller that is always instantiated is component controller.
Custom controllers instantiated on demand when their context is accessed or user-defined method called.
As far as view may not have externally visible context nodes and methods (you may not add view controller as required to other one and use nodes/methods of view), the only time when view is instantiated is when it get visible for first time.
To solve your problem, try the following:
1. Save event parameters to component controller context node element before firing event.
2. Create mapped node in target view and set node from controller as source.
3. In wdDoInit of target view insert the following code:
wdThis.<eventHandlerName>(
null, //no wdEvent
wdConext.current<NameOfMappedNode>Element().get<NameOfParamA>(),
wdConext.current<NameOfMappedNode>Element().get<NameOfParamB>(),
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Quicktime Movies Not showing as Events

I recently upgraded from a PowerBook G4 running iMovie '06 to a PowerBook Pro running iMovie '11. When I used to finish a project in '06 I converted it to Quicktime with no compression and stored it on an external hard drive, since I had only 80 gigs on my internal drive. I then trashed the original project, figuring I could always restore it by dragging in the QT movie. When I received my new MBP I put all movies from the external on the internal, since I had plenty of space. Unfortunately the QT Movies do not show up as events in iMovie '11. What gives?
Also some of the listings in the events have a "!" over them. What does that mean?

If you are loading your Shockwave movie into a browser from your local HDD (instead of having the page served from the web) then you need to have a folder named "dswmedia" somewhere in the path for external files to load. Check the help docs.

Imported Movies Not Showing In Events In iMovie After Import

Might be a simple question, but nevertheless, the issue has me pulling my hair out. Hopefully I will find some help here...
Recently purchased an El Gato Eye TV HD. Works great and allows export of HD video recorded from TV and such, very nice. I have exported video from it using HD 720P format and then import it into iMovie with no problems....sometimes. Sometimes after iMovie completes the import, when I select the Event it says that there is no such video and to select another event. Any thoughts on this? I use the same process every time but more often than not the import "doesn't take," as it were. Any ideas?
Thanks in advance!

Thanks for the tips, but none of these items is the issue. I am using an external 300GB connected via FW 800. The drive has maybe 20GB of stuff on it, so that is not an issue. I can't figure the issue out, because I did a little test. I took some video I captured using the El Gato device, exported as HD 720P. Using iMovie on the Mac Mini, iMovie won't see it on the Mac Mini. I took the same exported version as above and put it on my MBP (2.16GHz, 3GB RAM). Imported it into iMovie in the same procedure as I did on the Mini. Except this time on the laptop, iMovie sees it. Something somewhere on th eMini isn't working right. I have tried repairing disc permissions without luck, so I guess I am down to wiping and reinstalling all my software on the Mini. Hopefully that will work. Any thoughts?

Modbus ethernet driver not sending complete packet

Hello,
I have a modbus ethernet driver sending out Floating point data (F0002-F0026) once per machine cycle for spc collection. The problem is that the last float32 is getting cut in half and the data is not coming across. To remedy this, I have set up an additional register (F0028).
Attached is a screenshot of my advanced modbus settings and the ini file. Would any of these settings contribute to the problem?
Thanks,
Steven
Attachments:
Modbus Ethernet.zip ‏119 KB

Hi Pratik,
Are you using bufmod module for buffering the data? If so, then you must be using SBIOCCHUNK ioctl to increase the streams watermarks? problem with this is that bufmod can only increase the watermarks to 64K, which may not always be sufficient for all the DLPI applications.
There is a way to increase the system-wide streams watermarks using adb if you don't want to write a module to use M_SETOPTS. Please provide your email address if you need more information.
Regards,
Sun/DTS

Iphone Calender doe's not send the event to iCloud

Hi all
Since a view weeks i have a problem with my icloud calender. I can't create an event on my iphone 5 calender and save it.
When I have selected all necessery entries and i click on the save button, the iphone 5 calender is frozen and nothing happens.
I'm able to create an event on my ical in the Macbook or either direct in the icloud, on both ways the event is visible in the iphone calender.
I opened i case by the Mac-support. I got an phonenumber and an e-mailadresse, but no answer on both ways.
The phone is reseted many times.
Does anybody has the same problem solved?
Kind Regards
Ewald

Hello ewaldmonn
I would check to verify that your default calendar is on iCloud and not on the device itself. Check out the article for further troubleshooting steps.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT4528 Iphone will not send new calendar data but will receive it from PC and ipad.

I just set up a calendar on iphone, ipad and PC. Iphone will not send new events but will receive from both PC and ipad. I just updated to iOS 6 and am reading others have similar problems. Any help would be appreciated. Thank you.

Are the other phones that can't receive messages iPhones? If not, that could be the problem.
See this Apple doc -> iOS: Using Messages
You can send and receive text messages using the Messages app included with iOS. Messages supports SMS and MMS on iPhone, and iMessage on iPhone, iPad, and iPod touch. You can also send iMessages using Messages in OS X Mountain Lion.

Mailbox Move Not Complete - Unable to make admin interface connection to server.

Hello,
I have added a second exchange 2007 server and have moved over 20 mailboxes to the new server. I seem to have a problem that the mailbox move has not been completed properly. I'm getting errors in the event log that the search indexer cannot connect to the
admin interface. I'm also unable to login as any one of the users who I've moved to the new server.
Here's one of the errors I'm getting:
Exchange Search Indexer has temporarily disabled indexing of the Mailbox Database Third Storage Group\Mailbox Database 03 (GUID = d4f3ee4d-68b0-4d21-8a76-ee96bf298f34) due to an error (Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError:
Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
    Lid: 10648   dwParam: 0x6D9      Msg: EEInfo: Generating component: 2
    Lid: 14744   dwParam: 0x6D9      Msg: EEInfo: Status: 1753
    Lid: 9624    dwParam: 0x6D9      Msg: EEInfo: Detection location: 501
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: EP-SW-EX04
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -1988875570
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 24060   StoreEc: 0x80040115
    Lid: 23746
    Lid: 31938   StoreEc: 0x80040115
    Lid: 19650
    Lid: 27842   StoreEc: 0x80040115
    Lid: 20866
    Lid: 29058   StoreEc: 0x80040115
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Int32 ec, DiagnosticContext diagCtx)
   at Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain, String password)
   at Microsoft.Exchange.Search.NotificationWatcher.NotificationWatcherThread()).

Hello,
I have been fighting today with the migration off my old SBS2003 server to a brand new SBS2008 server. I have been preparing this migration for a couple off weeks
now (watching videos, reading migration manual from Microsoft, searching TechNet, etc.)
After some troubles with installing the server in Migration mode if finally came to the part to move my old (legacy) mailboxes to the new SBS2008 server. At this point the drama started @#$@$#&^%%#$@
I followed the manual off Microsoft which descripted how to move these mailboxes.
Exchange displayed a error message :
MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
When I googled this error message I realized that many people encountered the same problem but no one had the right answer to this question. I have searched hours and hours to find a solution. It started to drive me crazy and to make it even more worse i discovered
that even though i completed the first step in the migration proces (update the schema to allow a SBS2008 DC to join the domain) my replication with the other DC controllers came with a schema mismatch error???? WTF is going on !!!!!!!!
Finally a brilliant college off me came with the answer that solved all my problems: To GET RID OFF THIS ERROR MESSAGE INSTALL: Messaging API and Collabration Data Objects 1.2.1 on the Exchange server.
After moving about 60 mailboxes my blood pressure dropped and became stable again.
I Have on finall question WHY Microsoft? Was this to much trouble to put this in het migration manual off 81 pages?
from-a-very-disappointed-microsoft-user
PLS: send me a reply if this solved you're problem moving the mailboxes to the new server. !

Razer Abyssus mouse sends click events but no movement in X

This is very strange: my mouse sends click events to X, but it does not move the cursor. I don't have any funny packages installed and don't have an xorg.conf. What can I do to make my mouse work?
Bus 005 Device 003: ID 1532:001c Razer USA, Ltd RZ01-0036 Optical Gaming Mouse [Abyssus]

Whooa, ok ... after unplugging it and plugging it back in, it works. Strange.

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Trying to create a new movie. It tells me to name my movie, and the only event choice is the last movie I made. I don't want it there. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

I'm trying to create a new movie. It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

I am trying to watch a movie on my ipod touch 4th generation but everytime i click it it says "operation could not be completed"

I am trying to watch the movie Taken but everytime i try and watch it a message pops up that says "the operation could not be completed"

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

HT1657 When I try to rent a movie from iTunes on my Apple TV it says the purchase could not be completed. My password is correct as well as my location and other information. What is the problem?

When I try to rent a movie on my Apple TV it states that the purchase could not be completed. My password is correct and location, user id, and other settings are correct. What is the problem?

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My imessage is not working at all is because when I send a message to my friend the bar of sending complete but it doesn't send what I can do please heeeeeelpppp !!!!!

My imessage is not working at all is because when I send a message to my friend the bar of sending complete but it doesn't send what I can do please heeeeeelpppp !!!!!

2-3 days ago, iMessage just stopped working on all my devices (2 iPads; 1 iPhone; 1 Mac), and it hasn't come back since. iPhone waiting for activation, the rest just don't send the messages.
FaceTime and iCloud work fine.
I really hope this is resolved soon, because I rely heavily on iMessage for the majority of my communications, and I need it back ASAP as I'm on holiday and out of my home country.

FLV movie not sending "complete" event

Similar Messages

Maybe you are looking for