FM for IBase Warranty Updating

Hi,
Is there any Function Module available for updating the
Warranty informaiton for the Equipment Master.
On the Initial screen of IB52 user will be entering the Object ID which is nothing but the equipment no.
Is there a FM availbale for updating the warranty information.
Thanks,
Mervyn

Hi mervyn,
Iam also looking for the functio module to get the results of warrantie for a particular product or Ibase.
If you find please give me details.
Thanks,
krreysh

Similar Messages

LENOVO G560 WARRANTY UPDATE

I own a LENOVO G560 laptop. I bought it on 23-6-2010. This shows that I have warranty covered till 23-6-2011. Now I got a problem in my laptop and i took it to service center. the service person told me that MOTHERBOARD IS TO BE REPLACED, and also he told me to BOOK A COMPLAINT WITH CUSTOMER SERVICE PERSONNEL. I too did the same and customer service personnel said that my warranty is not updated and so HE ASKED TO SEND A SCANNED COPY OF MY INVOICE. I did that too and im waiting for getting my warranty updated Now my problems are, *) can i get my warranty updated within 48 hours of sending (as mentioned by that personnel) *) If it got late and exceeded 23-6-2011, then my warranty will be expired. can i still get my laptop serviced and motherboard replaced FULLY FREE OF COST. *) Notice that my laptop got repaired before my warranty expires. Still I am MADE to worry whether i can get access to my rights Please help me as soon as possible

Hi tog1966,
I'm sorry that your warranty status is not up-to-date as it supposed to be. Usually, the resellers would send in a list of sold products to Lenovo for a batch upate of warranty. However, i'm not sure about the frequency of getting the list.
In regard to your case, you can check with your reseller for the warranty update. Alternatively, you could PM me the details below and i'll see what i can do.
Full Name
Machine Type Model
Serial Number
Phone Contact
Email
Proof of purchase(receipt of the purchase that clearly state the machine serial number and purchase date)
Thank you!
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

IBase warranty changes take effect???? Urgent..

Hi all,
I face a difficult where I need to change my iBase warranty database. I manage to grab the warranty information through the call function below. However, after I do the changes I still cant manage to see the effect in the IB53. The changes are not updating the particular iBase although I already call save. I have tried few save function module also no effect... Anyone can help me on this?
CALL FUNCTION 'COM_IL_API_CHANGE'
 EXPORTING
 iv_reltype = 'IBCWTY'
 IV_ENQMODE = 'E'
 it_link_attr = <lt_link_attr>
data: lt_reltype type COMT_IL_RELTYPE_TAB.
data: lw_reltype TYPE comt_il_reltype.
lw_reltype = 'IBCWTY'.
APPEND lw_reltype TO lt_reltype.
data: lw_new type COMT_IL_ATTR_COMPLETE.
data: lw_old type COMT_IL_ATTR_COMPLETE.
data: lt_link type COMT_IL_UPDDATA_TAB.
CALL FUNCTION 'COM_IL_API_SAVE'
 EXPORTING
 IT_RELTYPE = lt_reltype
 IMPORTING
 ET_INTERLINKAGE = lt_link
 ES_ATTR_TAB_NEW = lw_new
 ES_ATTR_TAB_OLD = lw_old
CALL FUNCTION 'CRM_IBASE_SAVE'.
Regards,
Mervyn

Hi,
if i made some changes to a workbook (e.g: change some conditions) on discoveror desktop,will them take effect at the same time on discoveror plus???When you save the report using the desktop the workbook in changed for all users including the Plus,
But in order to see the change in the Plus you will have to re-login to Plus.
This is since the workbook is saved to memory of the user's PC.
how and where can I make control for one user to access some workbooks and another user to access some other workbooks both on desktop and plus? (workbook accessibility control)Only the owner of the workbook can do that.
This is done in the desktop as well as in Plus.
In desktop go to the tool bar "File -> Manage Workbooks -> Sharing" then choose the workbook and share it with whom ever you like.
In Plus you can find it in the tool bar "File -> Manage Workbooks" then click on any of the reports and select the "Share" from the right.
You have to make sure that the shared user have access to the BA that the workbook is based on, and that the user have the privilege to use the desktop/Plus (this is done in the Administrator tool)
Tamir

I've send my Macbook Air for a warranty repair and it came back repaired BUT with new problems -.-

Good evening everyone...
First off I wanted to say that I'm ****** off and even more frustrated by my MacBook Air, god dammit this machine was expensive and now all I get are problems.
But enough of that, let me get to the point already.
So I made a topic in "Apple Support Communities" about a week ago ? Maybe two - bascially it was about my MacBook Air having this "kernel_task_" problem.
After that I sent this Mac for a warranty repair, of course they have replaced the Logic Board and claimed that it has been repaired - fine, that's amazing right ?
Well, NO.
So I was happy to finally get to use a computer at home (Not to mention that I need a computer at home to do any kind of studying or anything at all) and when I booted it up everything seemed to be fine - fantastic even !.
After launching it I updated my software (05/03/2013, Firmware Update 1.8, Java for OSX 1.0 and iTunes) and started to use it as normal, I was browsing the internet when my Mac turned off just like that while being plugged in into the charger.
I thought to myself - well, bad luck I guess.
I've turned it on again, it went fine for about 30-60 minutes then I turned it off without any problems
RANDOM SHUTDOWN COUNT : 2
After some time I plugged in my power adapter into it and guess what ? It turned on the MacBook by itself without me pressing the power button.
What the ****
So, basically what happens now is :
1. My MacBook Air randomly Shuts down
2. My MacBook Air turns on every time I plug my charger into it while being completely turned off
Any ideas -.- ?

Well, it turned off randomly again and I had some problems turning it on.
That was my first and last Apple computer I have ever bought, call it bad luck but I am dissapointed right now because I would expect a better quality product for that price.
Seems like I will have to build a PC workstation then, at least that will be more reliable.
Thanks for the "help" though

Preview for developer cyan update

Every one of friends are using preview for developer cyan update so i cant wait any more. So , if I update through developer na what are problem i will face. Am using 720 and i have additional warranty so that i have any problem in warranty because my after updating developer , he services the phone freely with warranty....
Solved!
Go to Solution.

Ganesh3ganesh wrote:
@nj15 ya i know warranty will be void after developer update but my friend updated preview for developer cyan update and he got problem in phone handset jack not working so he went to nokia care and they serviced the phone freely in warranty.
finally can I update developer cyan update
If that's the case then proceed at your own risk. While I'm not totally in favour of installing the update, unless you are a developer for Windows Phone, but anyway, the latest Nokia Software Recovery Tool now allows downgrading or reverting back to the current consumer release update.
Good luck

Function Module required for IBASE component

Hi Experts,
Is there any FM which can get the warranty start date with IBASE component??
Warranty is assigned to IBASE component under relationship tab.
Points shall be rewarded for sure
Regards,
Madhu

Hi Madhu,
This the Table that is used to retrieve the Warranty Profile for the Installed Base. CDBD_IL_IBCWTY - Installed Base Components - Warranty Relationship. If you know the IBASE no and the corresponding COMP number then you can get the Warranty related details. Till now I was unable to find any FM that would do the same.
For the IBASE related details, you can have a look at the following Function Group. IB_CRM_API - IB: CRM APIs for IBase.
Thanks,
Samantak.
Rewards points for useful answers.

Twist - Machine Type - Warranty - Updates

Hi, I have a new ThinkPad twist. This is my 6th ThinkPad and the X1 Carbon Touch Toga/Twist will be my 7th some time next year
The machine type and model for this unit seems to be N3C2_9UK but this is not recognised by the extended warranty form, the warranty lookup sever or the system updates server.
Instead I used the machine type and model 3347_9UK to register my warranty (still waiting for confirmation that worked).
I am unable to use the think vantage software though for a warranty lookup and for updates.
Anyone got any clues about this?
Thanks

Hi Kamleshrao,
Welcome to Lenovo Community Forums!
You can refer this document to find the MTM number of your desired machine.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Detailed Software Repair Instructions using Pc Companion(Win)or Bridge for MAC. (Update 8/5/2014)

We have an extended guide that should help you repair the system of your phone. This instructions are valid for all Android based units and for some legacy Sony Ericsson models(The list of phones that can be used with the application is displayed in Step 9 of the process). please follow the instructions carefully: Turn the phone off and disconnect it from the computer. 1. Visit this link:http://www.sonymobile.com/us/tools/pc-companion/Click on Download PC companion2.Run the software After the installation the first screen will show you the PC Companion Startup Guide which gives you a brief explanation on the main modules of PC companion (Support Zone, Xperia Transfer, Contact setup and Media Go) Keep clicking next.3.Now you will see the screen with the different modules.Select Support Zone> Click Start. The program will download the module. Then click on start on Phone/Tablet Software update. (Here you can choose to update an accessory, go to step 14 for instructions) Note: At this point if you get an error stating that "unable to install update components" or "server is busy" Please proceed to step 13 . If you not see that error then continue with step 4.
4. The program will show a window saying "could not find phone/Tablet” Do not Connect phone instead select Repair my phone/tablet. This will bring you to a window with a warning that says "data will be lost" (do you want to continue) Select to continue (Data in the phone will be deleted, only data in the SD card will remain. Make sure you have done all proper backups if possible)6. The program will issue a second warning stating that “data saved in the phone /tablet will be overwritten during the update of your phone”. Click on the checkmark box next to the acceptance text and select Next to continue.7. Next the computer will download the necessary files (Prepare stage, this can take several minutes depending on the speed of your connection) and then its done it will show you a list of recommendations for a successful update operation. When you are done reading this section click on the checkmark box and press Continue8. Next you will get a Battery level warning that states that your phone should have at least 80% battery. (If the issue in the phone does not permit the unit from turning on, then charge it connected to the wall charger for at least 2 hours and then comeback to this step) Then click on the checkmark and select Next9. Choose the Phone from the list then click on "next" then you will see a new section telling you how to connect the phone. (don't connect it yet) Again, at this point the phone must be off and disconnected from the PC. 10.. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.) 11. If you failed to follow the steps correctly the phone will turn on. If this happens disconnect the phone from the cable, turn it off and repeat from step 10). 12. If the phone is connected properly, PC Companion will proceed with the update ( It will tell you to let go of the key) then wait for the update to finish and follow instructions on screen to disconnect the unit. End of process. ----------------------------------------------------------------------If the software fails to install:13. If "unable to install update components" 1. Close Pc companion 2. Install Java from: http://www.java.com 3. start Pc companion again and try to do the software unlock process once more. 14.Select Accessories software update. Click on start and the computer will download the necessary files (Prepare Stage) it will take several minutes. Then follow the instructions from step 8. Note: Some computers may block the installation of the update service, if this happens use this:http://www.sonymobile.com/us/tools/update-service/ this is the Standalone update software. (Not globally available)If the Phone is unresponsive (Then do this extra step and when done proceed to redo the repair process:Press and hold the power button and the volume up button at the same time for 10 to 15 seconds. This will reset the unit)Note: This procedure does not work for the Xperia Play R800x (Verizon and other Non SIM card variants of the Xperia play that lack MTP support. It does work for the R800a At&t's model)Bridge For Mac instructions on my post below. Valid for all Android based units and most java Sony Ericsson units.

Here are the basic Steps for Bridge for MAC.Download Bridge for MAC from:http://www.sonymobile.com/gb/tools/bridge-for-mac/The phone should not be connected to the MAC.
The phone should be off.After the Download unzip the file and drag the bridge for MAC icon to the Applications folder. (install then use finder to locate icon)In the Main "No phone connected" window, on the top menu (top application menu) Select "Phone" and scroll down to "Repair phone"
This will open the Phone Software Restore window with the 3 sections for Start, Prepare and Update.
Click on continue bellow. Doing so will popup a window warning you about the loss of your personal info. Click on the checkmark signaling that you understand the data loss situation,
This will take you to the Connection Procedure Screen. Follow the instructions in the screen and click on continue*.
*One key aspect of the last step to keep holding the indicated button before and after you connect the phone to the MAC until the update starts. IF this is not done correctly then the phone won't connect to the MAC

App updated and syncing fine with ipad; updated from PC, but not for iphone. Updated on PC, but not on iphone

Product: iPhone 5
itune: 11.2.2.3; ios 7.1.1
iPhone 5 app updated fine from PC, but will not sync with iPhone.
Steps: Fire iTunes from PC, then connect iPhone, did app updates in iTunes, but did not sync with iPhone (the # updates stays the same next to "APP Store").
It worked fine for iPad App updates. I tried connect, disconnect, did not work. I also read some posted comments, but still cannot resolve the problem. Please help. Thanks!

Hello there, graced.
The following link from the iPhone Basics provides another way to update an app on your iOS device:
App Store - Learn more about iOS 7 and iPhone - Apple Support
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= App%20Store#TI133
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2

HT4623 I have wifi connection on my ipod and it tells me there is a software update as there is a no. 1 at the side of it but when i try to update if tells me unable to check for update An error has occurred while checking for a software update. why? help

My ipod will not let me access any apps using wifi, it indicates at the top of the screen that there is a strong wifi source but it refused to work on wifi apps. I think this is because if need an update but will not let me as it says an error occurred while looking for a software update. can anyone help please thankyou. my ipod is 4th generation btw

my ipod is not the newest update possible as i said i tried to update but it wouldnt let me as it wont let me on wifi sources such as safari facebook and other apps which use wifi.all the apps are fully updated

HT1918 My husband's iPhone4 uses one apple id for purchases and updates, but another is listed in the App Store. How do I reconfigure his phone to only use the apple I'd and password that is used in the the "featured" section of the App Store?

My husband's iphone4 seems to have 2 apple ids. The one listed in the featured section of the App Store is the correct one. The one that asks to be signed into for purchase and updates is also mine, and the incorrect one. Hence, our devices are linked. How can I remove my apple Id from his phone so that there is no connection between the two?

I think it may be because he got his phone first and not seeing a future issue, I set his phone up to my already existing apple Id used for my iPod. If I connect his iPhone to our pc, can I create his own apple id account?

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

New iphone. someone else put in their username and password. time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ?

new iphone. (someone else put in their username and password. so i had lots of apps that i had to eliminate but do NOT wish to compromise the contact list) time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ? then, how do i backup contacts and proceed before updating iphone?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes or iPhone forums.
Regards.

FM for IBase Warranty Updating

Similar Messages

Maybe you are looking for