FM to search for Contracts related to Ibase (CRM)

Hi there,
Is there any FM that can be used to search for contracts that are attached to the Ibase? I can't seem to find any suitable way to get this data...
Thanks,
Josh

Hi Joshua,
Try this FM IB_CONTRACTS_TO_COMPONENT and also refer to function group IBREP_CONTRACTS.
Regards,
Karthik.

Similar Messages

  • Search for contracts with "ship to party"

    Hi,
    I am trying to search for contracts with a ship to party. We had a number of contracts input to SAP under one sold to party, now i I am trying to match sites to the contracts. I cannot seem to get a function to be able to search for them with just the "ship to party".
    Any help will be usefull.
    Thanks in advance
    Dom

    Hi Dom,
    Are you searching for Contracts in CRM Web UI or in CS??
    If it is in CRM Web UI - you can use the standard search with below search parameters.
    Thanks,
    Siraj

  • Extended search for contracts

    When I select a purchasing organisation in the extended search criteria, the search results returned are those that are expected. However if I change the purchasing org the old value is retained. If I delete the old value and search again it is put back into the search field by the system. Also, when I choose a product category sometimes the results give me all the contracts when I am expecting no results.
    We have applied notes 1088749 and 1067327...still the issue persists....
    Is there a new note for this issue?
    Regards
    Vinay Sridhar

    to go into details:
    I am facing the following issue when trying to search for contracts or global outline agreement:
    When I try to search for a contract after clicking the Extended search...I enter a purch. organisation and some results are displayed.
    However if I change the purchasing org the old value is retained. If I delete the old value and search again it is put back into the search field by the system.
    Also, when I choose a product category sometimes the results give me all the contracts when I am expecting no results.
    We have applied notes 1088749 and 1067327...still the issue persists....
    Is there a new note for this issue?

  • Search Service Contract based on IBASE

    Hello Experts,
    My requirement is In the  Search view of Service Contracts  ADD the Search by IBASE option  to Search the Contracts and i have to search the service contract based on IBASE can you please give me idea how can i achieve the solution?
    Regards,
    Chetan Agali.

    Hi Bhushan,
    Thanks for your reply I append the field called zzsrv_ibase into the context node btqsrvcon through the structure,the field is in the context node but it is not appearing in the configuration tab I saw in one of your tread you mentioned about the maitaining the field in the design layer i will do that, more important is I need related code and where i need to add the code and I saw that in one of your tread mentioned about ( modify the class as per your requirement and then maintain entry for this query in CRMC_OBJ_BTIL_C so that your custom class would be called.) can u please elaborate this.
    Thanks & Regards,
    Chetan Agali.

  • Searching for contracts

    I'm trying to search for a signed contract (out of MANY that were sent).  I'll use the search bar on both the Home and Manage pages and i'll try it with the person's name as well as their business name, and nothing will show up.  Their signed contract (which they say they've signed) nor a copy of a blank contract showing it was even sent.
    Besides going through the list of Signed Contracts, the Our for Signature tabs, and the ones listed in the Multiple Signatures what about all the other ones?

    Hi renegadecraft,
    This sounds like you may not have server-side searching turned on for your account. What that means is that if the contract is a certain age in the server AND you reach a certain threshold number of contracts sent / signed, the contract you're looking for may be truncated out of the initial search and you'll need to access the archival search tool. This isn't turned on for all users right now (it will be soon); in the meantime, I will contact you via PM for additional information so I can assist further in getting this resolved for you.
    ODG.

  • TREX search for contracts

    We have installed SRM5.0. TREX is running on a separate server. A RFC connection between the two servers has been established. Is any other config needed to be able to search in SRM via TREX?

    Hi
    You need to execute program SAP_BC_TREX_ADMIN to create contract index. Do read the documentation for this program.
    Check also note : 766516
    Best regards
    Ramki

  • Search for Idocs in XI

    Hi
    in our scenario we have idocs being posted from xi to crm.
    But the idoc numbers are different in xi and crm.
    Is there any way to:
    Search for a particular idoc in crm and its corresponding idoc in xi.
    i mean suppose 123xxx is an idoc in crm that was posted from xi then corresponding idoc of 123xxx in XI .
    Thanks in Advance.
    Helpful answers would be rewarded.
    Thanks,
    Amith

    Hi Juvvadi,
       i will explain the process which i use for searching XI IDOC number for R3 IDOC number.
    In R3 system,go to EDIDS DB table,restrict selection with IDOC number(CRM) and status 50 and get TID.
    In XI,execute Tcode-IDX5, give TID and Created On Date,Execute.Extended Functionality(****F1),Select all then IDOC Tracking(ShiftF4). Then it gives XI IDOC number and related CRM IDOC number.
    Cheers,
    Jag

  • What are the config steps for contract mass change and quota arrangement?

    Hi friends
    what are the config steps for contract mass change and quota arrangement?
    Regards
    Raj Kumar

    Process Flow
    The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
           1.      Search for contracts
    You search for and select the contracts or the contract hierarchy that you want to change.
    Contracts that have the status Closed cannot be changed.
           2.      Define mass changes
    You specify the changes you want to make.
    You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
    Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
           3.      Simulate mass changes
    Here you can perform a trial run of your mass changes. This simulation step is optional.
    We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
    You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
    Background processing
    The system processes the changes in the background.
    If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
    The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
    Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
    The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
           4.      Carry out mass changes
    Here you apply the changes to the contracts.
    You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

  • Table for Contract

    Hi Gurus
    would you pl tell me which table we need to look in to see contract and contract type field?

    Hi,
    Please check these tables for contract related fields.
    VEDA
    VEDAPO
    VLAUFK
    Thanks & Regards
    Sadhu Kishore

  • Contracts related tables in SRM? procudedure to find the tables in SRM?

    Hi all,
    Can any one give me the table names for contracts related information in SRM,
    and what is correct procedure to searth the fields and tables in SRM can any one explain about this?
    Thanks
    Kiran,

    Hi Kiran
    Tcode BBP_PD is a wealth of knowledge.
    you need to select proper object type from the drop down and enter the relevant Object number and execute.
    On the next screen in the details double click on each separate node  and it will take you to table and display the records,
    There are vaiorus object type like Shopping cart, PO Contract, Bid etc.
    regards,
    Nimish Sheth

  • Are there any construction bid/forms/contract related apps or software for mac iOS?

    Looking for alternatives to bid magic/d-tools etc or possibly something even cooler for bids, estimates, forms and contracts related to the construction industry

    Look in the Mac App Store

  • I can't seem to access new mail on my I pad . I can only see strings of messages that are related to each other. I also have lost the ability to search for messages that are no longer on display on my I pad.

    I cannot seem to access properly any more the new e mail messages on my I pad. I can only see strings of messages that relate to each other.
    Also I cannot search for old messages that have now disappeared . The search bar has disappeared.
    Tom

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • Where to search for a specific Dimention related data

    Hi,
    I guess, hyperion planning store the dimention related data( parent, child, uda,attributes, consolidation operator, data storage etc) in some relational tables of that planning application. Can anybody help me understand where & how those data is stored and what are the table name I should look for a particular dimention related data?
    Actually I need to look into the planning RDBMS table to get the membernames of one particular dimention and search another huge Oracle database to search for those and retrieve the relevant data writing a query. I am using Planning ver9.3.1
    Please revert back for any clarification.
    Regards.

    Hi,
    Take a look at below tables in your application repository schema (db), they are all linked through id fields and they include dimensional infromation.
    HSP_OBJECT
    HSP_OBJECT_TYPE
    HSP_DIMENSION
    HSP_MEMBER
    HSP_ALIAS
    You get detail information from HSP_OBJECT. HSP_OBJECT keeps entire details for entire metadata. Other tables will help you understand the relations, positions etc.
    Cheers,
    Alp

  • Search help for Contract in F-47

    Hi,
    How to provide search help for Contract in transaction F-47.
    Regards,
    Sriram

    Hi
    F-47 is for Down payment request.
    What do you need information on contract - your question is not clear
    SKS

  • Error while searching for Business Partner in Web UI

    Hi,
    While searching for the Business Partner in Web UI either by First Name, last name or Account ID, we are getting following error:
    Cannot display view BSPWD_BASICS/ErrorView2 of Component CRM_UI_Frame
    An exception has occured
    Exception class: CX_BOL_EXCEPTION - Access previously deleted Entity
    Method: CL_CRM_BOL_ENTITY=>GET_ROOT
    Source Text Row: 12
    When the business partner blind search is given (i.e. by entering *), all the business partners get displayed without any problem.
    Also, this problem occurs only for some business partners and NOT ALL.
    This problem, has also been observed sometimes when an IBase entry is created in the background.
    We are not quite sure whether notes, 135814 & 1515327 will help us in this regard, as the root cause is still unknown.
    Could anyone suggest possible causes and solution for the same. We are on CRM 7, using the standard business role.
    Thank you in advance.
    Regards,
    Chhaya

    Hi Shiromani,
    We have observed that this problem is peculiar with the data records attached to IBase ONLY. It means, if we process them further e.g. create a contract for the Business Partner after attaching the IBase, this problem doesnt occur. Then we are able to search the BP without any error.
    In short, when an IBase is created for a BP, and if a search is given for such BP, the error given in the first thread occurs, But when an IBase is created and immediately after that a contract is attached to the BP, and if a search is given for such BP, then there is no error.
    We are still further investigating the root cause. But any suggestion/inputs are welcome.
    Thank you.
    Regards,
    Chhaya

Maybe you are looking for