FME 3.0 issue with Osprey 440 card

I have FME 3.0 running perfectly with an Osprey 5x0 capture card on a Windows 2003 server. I tried running it on the same setup with a Osprey 440 card, but I can't seem to get it to read video or even select the right input from the Input dropdown.
Anyone have any ideas?

To configure Osprey 440 you need to select exact Input in FMLE from this device.
Osprey 440 has 1 audio slot and 4 composite Video slot.
Starting from Audio cable, you have Video A, video B, video C and video D.
Similarly on Audio breakout cable, you have right and left channels for each of the 4 inputs starting from left 1 right 1, left 2 right 2 and so on.
In FMLE these device are listed as Osprey 440 Video device 1A, Osprey 440 Video device 1B and so on.
You need to select exactly that input in both audio and video drop down list whom you are giving input in the card.
Hope this helps.
Let me know if you still face the problem

Similar Messages

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

I added an iTunes card to my account. THe balance shows on the account, but I can not download, because iTunes has an issue with the debit card linked to the account. Shouldn't it default to the balance from the card I added?

iTunes keeps telling me my debit card is declined, when I am trying to use an iTunes card that I added today. The amount from the iTunes card shows on the account.

You need to fix the issue with the credit card on the iTunes account or you can remove the credit card.

Ok, so I have a 1g macbook Pro and I'm having an issue with the graphics card, so I believe.

     I believe I'm having an issue with the graphics card. For one, when I'm using programs like iMovie '11, SPORE, or the Sims 3 for long periods (hours usualy) of time, the computer will be perfectly fine. It gets warmish-hot, like usuall, all of a sudden it will randomly freeze for 5 to 10 seconds, then shut down and reststart. This happens, espically on the Sims 3 I can play for a while, but when I try to save it will shut down on me.
     Also, I got a new iPod touch 4g on the 25th, the first few times I tried syncing and downloading, it started off fine, but after 10 min. it would restart. Now it works ok, but I still monitor it just incase.
     Can anyone help me understand why all of this is happening? I beleve the graphics card isn't good enough, even though it meets the standards for iLife, and The Sims 3. My graphics card is a ATI,RadeonX1600. The laptop has 2 GB RAM runs at 2.16GHz with an Intel Core Duo on OS X Snow Lepard (10.6.8). Thanks everyone.

Threads are just processes that link together like the threads in these discussions, well, maybe that is a bad example given how disjointed these get
It looks like you are not pushing the cpu or hard drive enough to cause your behavior. Not sure what the temperature limit on that cpu is, on the newer models it is around 100-110 °C which is notciabley hot, and the system shutsdown for self protection at the thermal limit.
You could be hitting a thermal limit causing that behavior...so do you see good behavior at lower load levela on the system? Does this only happen with when you are under the high graphic loads?
Trying to zero in on when this occurs to see if we an isolate the problem.

Issues with games, video card issue?

Hi,
I have been having issues with games lately. Mostly they are hidden object games from Big Fish, but they start up then minimize, it doesn't crash completely just minimizes, I click on it again and it works for a few seconds and minimizes itself again and again. I am unable to play the games because it keeps minimizing. could this be an issue with my video card? I have attempted updating it but it doesn't seem to help. Any ideas?

Ok OK, Update...
the games work perfectly on my father's HP which runs windows 7...so it definatly is NOT because of not updated stuff....I really dont know what else to do at this point....no suggestions from anyone?!?!?!

HT203254 Issues with the graphics card on 2008 Macbook Pro

So if I am having issues with the graphics card and my Macbook is among those from 2008 affected but it is after the free repair program has ended, how can I repair it myself? What parts need to be replaced?

So if I am having issues with the graphics card and my Macbook is among those from 2008 affected but it is after the free repair program has ended, how can I repair it myself? What parts need to be replaced?

Any issues with adding this card to my mac?

I would like to add a card to my mac pro that will enable me to capture video from certain types of HD video cameras.
1. Do I have a slot available to put in one of these cards?
2. Are there any potential issues with doing this?
3. I am guessing that by adding the card, it will create an open port on the back of the mac that will allow me to connect the camera.
http://www.blackmagic-design.com/products/intensity/
I have the Dual-Core Intel XeonProcessor Speed: 3 GHz.
Thanks!!!!

The Intensity HDMI card is normally used to capture UNCOMPRESSED video from an HD vidcam.
Lets say, for example you get a Canon HV20 camera - it has both firewire and HDMI outs. The camera, being HDV, uses HDV compression to write to tape. So once video is on tape, you will be capturing HDV encoded video (just fine with FCP). The HDV standards dictate 1420x1080 even though the sensor of the HV20 is a native 1920x1080. But, since non-square pixels are used, consider it 1920x1080 aspect.
If you hook the HV20 to your Mac Pro using HDMI and the Intensity card, you can capture uncompressed, native 1920x1080 video. However, you better have enormous and extremely fast Raid storage, as it requires sustained data rates roughly, what, 100 times greater than HDV? And you better have a really long extension cord if you plan to use it in the field, as, you must remember, once written to tape it will be compressed HDV video, so the small gain you'll get from native uncompressed 1920x1080 video is only available at the time you shoot, and only out of the HDMI port.
HDV looks stunning as is, so unless you are a professional with special requirements (in which case I've not told you anything you don't already know), you may want to rethink this.
If you shoot well exposed HDV video, and edit with FCP or iMovie HD for that matter, and play back from tape to a 1920x1080i HDTV, it is as good as watching the Discovery Channel HD.
Good luck,
John F

Issues with a Credit Card Machine using a VG202

Has anyone run into any issues with using CC machines with using SCCP on a VG202?
Setup: 2 CC Machines--> VG202 --> connecting to Call Manager 8.6 using DHCP. Both of my CC machines work fine doing a normal CC transaction, but at the end of the day the client runs a batch report on the cc machine but the cc machine will time out after 1 min. The Batch report usually takes about 3 to 4 mins to complete.

Thank you!
Adding "network-clock-select 1 T1 0/0/0" to the config resolved the issue. No more slips and credit card machine runs smoothly now.
I very much appreciate your assistance.

Issues with MSI FX5600 cards

In my part time i build computers from a small buisiness i started while in university.
I have several issues concerning the new MSI FX5600 Cards, that have not been completely answered in any post that i have read here in the forums or in the poor FAQ section of the MSI website.
These cards have been around long enough now that MSI should start taking Customer service into consideration and start answering some of these issues that many have mentioned and have yet to get an answer to.
The first Set are Hardware related. Second are Software.
HARDWARE#1 First off is the poor construction of the heatsink/fan assembly on these cards, the one im using now, along with pretty much every one i have seen has large gaps between the RAM chips and the heatsink ( well its not really a heatsink more like a heat spreader plate).
The solution given in this forum is for the consumer to do the work of assembler himself (thats pathetic). So i guess MSI should stamp "some assembly required on their boxes and drop the price some $50 for the time it takes a user to repair this problem.
MSI should hire some good assembly people at your factories! I have installed many cards over the years and by far this is the worst heatsink assembly i have seen, which is quite obviously due to MSI using cheap labour done at a rapid rate.
Or just abandon this one heat spreader plate idea and paste individual passive heatsinks on each ram chip, like Asus and many others do.
And best idea yet is to Recall all your cards and offer everyone a decent heatsink solution to replace this poor design.
HARDWARE#2 Why is there no temperature monitoring on these FX cards? Simple question however i have yet to see an answer. Will there be in the future, or is there no temperature monitoring due to lack of a hardware, or do we all have to go buy thermocouples and connect them to our heatsinks, if we want to know the temp of our cards. Given the above #1 it would also be good to know the temp of the RAM given that many of the chips have no heatsink at all connected to them.
HARDWARE#3 The unit that plugs into the back of the VIVO cards never quite stay plugged in well and are so short that due to a lack of slack in the cable weight put on it by pluging in other cables tends to cause the whole unit to become unplugged. Why not just make that cable a litle bit longer?
HARDWARE#4 (related to above vivo connector unit) why use a (infra red )IR reciever connected to the video card? Why not just supply a seperate ir reciever and have that connected to a USB port or somthing else. Does it really make sense to have IR using the AGP resources? Also the quality of the ir reciever is absolutely the cheapest i have ever seen, and is awkward to place in any usefull position without using tape to stick it it to somthing.
Hardware#5 Cheap Remote control. Lots of buttons on it however most are really useless, and dont work anyways.
Instead of providing these remotes free with the cards, make a good remote remote control that uses RF (radio frequencies) instead of the awfull IR, and that can actually controll common software that people would normally use, or that ships with operating systems like media player etc.. Also why not have it also act as a second mouse like other manufacturers do?
SOFTWARE #1 Lets start off with the IR software or driver, I have used several other IR recievers/software that work perfect within windows. HOWEVER MSI has the absolute worst i have ever seen. The memory leaks everyone has is a perfect example of how poor their IR hardware/software work together. Will you be providing some new drivers to fix this? Or was providing a remote control just a gimmick to try and capture a few early customers?
SOFTWARE #2 the media center is so awfull, due to many reasons here are some.
a) for many people it wont even work to begin with
b) the resolution and more importantly Refresh rate ( 60hz ) is just plain stupid. ( i dont know anyone who can stand looking at a 60hz refresh rate for more then a few min without getting a headache).
c) use of remote control is full of bugs and is limited to this software alone.
d) i have yet to find any way of even adding pictures or other media files to the lists (not that i really care) this just points out the poor user interface.
I could go on about how bad it is, but i wont.
I recommend that MSI re-think their media centre and just get rid of it all together and start from scratch on somthing new. Try looking at what competitors such as ati's software and even Nvidia have as thier media centres. Also just dont use Intervideo's WinDVD and do like Asus and go with Cyberlinks PowerDVD.
c) lack of any monitoring software for video chip or ram heat status. This is related to the hardware comment #2
d) 11 cd's software bundell. Who cares why do you guys hype this if its basically 11 cds of old games that dont even use direct x9 capabilites of the card, or apps that i would question if anyone would even use. Most would prefer a drop in price versus having this large cd set.
Well that is it for now. Normally i would get paid for my ideas and suggestions where i work full time as a product development technologist, But this short list I provide freely hoping that MSI get their act together and make a better product. There is lots of potential there however it would require much more in terms of fixing these bugs that really reduce customer satisfaction and thus reduce sales especially in the customer recommendation sales.
Two last comments not related to the cards:
i) The packaging. is it really necessary to pay for the extra ink to put colorfull images within the inside of the box? could you not use that extra money saved and put it into either hiring better assemblers or making wires a little longer etc..?
ii) There is nothing mentioned in the manual concerning the Remote control its use or that of the media center.
It would now be nice if MSI would plese answer some of the above questions and sittuations and create a new FAQ for this card and have it available within the FAQ section of their website.
Thank you for reading this post.
hope for some improvements soon

I echo these words too. :O

Intermittent issue with Wifi network card.

Nothing can be more annoying than an intermittent issue. Unfortunately it does happen to my MBP. This is the new MBP purchase Jan. of this year. About 2 months ago, the MBP developes a problem. The sympotom is, after powering it on, the Wifi network card sometimes suddently stop working, even cannot be recognized by the system accidently. After the problem arise, I cannot turn on wifi again. The only way to get it back is to restart it. It used to work well with my home network and company network.
I have tried every possible mean to figure out what's wrong with it. Tried SMC reset, PRAM rest. Reinstall a new OS on a new partition (per instruction from Apple support). I hate to say this is a HW issue but support people from Apple did suggest sending it to a service center for a check up.
Before I actually dropping it at service center, I wanna know if someone has experienced that before?
Repeat, it used work well with my router.

senthil,
It helps to describe your setup parameters.
Which antenna(s) do you have? Either 2 internal antennas or 1 external antenna.
How far away and what obstructions (walls - wood/concrete) is the wi-fi router?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

No Sound Issue with PHASE88 sound card

K8T Neo series motherboard, socket 754 - NO SOUND ISSUE
I'm using a AMD athlon64 processor
I am having problems with my PHASE88 sound card. Windows XP regonises it and says the "driver is enabled but has not been started." I can't fix this problem in the device manager anywhere and so I was thinking it may be a conflict with the onboard Audio. I can't find in the BIOS where to disable the on board audio - can someone help?

Hi
Page 3-20 of manual
Integrated peripherals - onboardPCI controller - AC97 sound -disable it.
You may have to install device with New Hardware Wizard in Control panel.
cheers
Jocko

Issue with new video card

I purchased a new video card a few months ago to upgrade my somewhat-aged system. when i put it in the slot and started it would load for a second, but then restart in an infinite cycle.figuring it was a power supply issue i purchased a 650W PSU and plugged it in however this did not fix the problem.am i doing something wrong or does my motherboard not support such a new video card?
CPU
   Intel Pentium D 925
   Presler 65nm Technology
RAM
   2.0GB Single-Channel DDR2 @ 266MHz (4-4-4-12)
Motherboard
   MSI MS-7236 (CPU 1)
Graphics
   Generic Non-PnP Monitor @ 1280x1024
   DELL M990 @ 1600x1200
   512MB Radeon X1300/X1550 Series (Sapphire/PCPartner)
   Radeon X1300/X1550 Series Secondary (Sapphire/PCPartner)
   CrossFire Disabled
Hard Drives
   156GB Western Digital WDC WD1600KS-00MJB0 ATA Device (SATA)
The video card is a diamond Multimedia hd 5500 Link:http://www.diamondmm.com/5550PE31G.php

I am also suffering from the same problem. I have purchased a new video card and when installed the system is continually powering up then off. I have also replaced the power supply with a new 600W unit but still the same. I have checked that I have the latest driver and bios. Any help would be great.
M/B MSI 945PL Neo
Ram 2GB DDR2-533
CPU Intel (R) Core (TM) 2 4400 @ 2.00GHz
Old Graphics card Nvidia GeForce 6600GT (which works fine)
New Graphics card Radeon HD 5670
Ops system Win7 32Bit

Can you help with Tiger Issues with sonnet accelerator card

I am working on a G4 Quicksilver with a sonnet 1200/2M accelerator card. The system will not do software updates any more and Safari beachballs when your move from the start page to another URL. I have tried to install the original software but it refuses to complete the process. It begins to verify the disk then stops and says to try again.
Any ideas?
G4 Quicksilver Mac OS X (10.4.4)

Hi justyouraveragemacguy;
One of the other things I discovered about Norton Utilities before I gave them up for good was the fact that it is capable of making changes to your disk without even letting you know that it is going to do it. Once it had done that to the four disks on my system, they were so corrupt that I couldn't do anything with them at all.
I called Symantec and verified that I had the correct version for the version of operating system I was running. Once that had been established they instructed me to get rid of all the disks because they were bad.
Not being able to accept that all four disk would go bad in exactly the same way at the same time, I started reading about Norton Utilities here at this forum. It was suggested that I use DiskWarrior to repair the damage Norton had done. It took DW well over a day to repair my disks but it was able to return the disks to service, one of which I am still using to this day.
Allan
If you are interested in donating your spare CPU cycles to science, please try
http://teammacosx.homeunix.com/index.html

"1008:9,-5000" I do have a similar issue with installing Iris card scanner.

When I try to install an IRIS card scanner, the systems stops at the end and indicates"1008:9,-5000" no accessibility rights.
Reparing accessibility rights does not help. I have recently installed IOS.

I'll try Silverfast.
Err... Try VueScan first. VueScan have one-for-all software, Silverfast - lot of modules for specific scanners. If they not have version for your specific scanner - no chances.
VueScan works with at least some IRIS models: http://applejac.typepad.com/applejac_macintosh_users/2009/05/vuescan-universal-s oftware-image-capture-tool.html
And I see 10.7-10.8 support on IRIS page: http://www.irislink.com/c2-1628-189/Mac-OS-compatibility-support.aspx

Skype mic issues with Beats soud card

Hi All, I am having problems to make use of my internal mic especially to use Skype, I have already changed my first DV6 laptop due to the same issue! can anyone help please? and to HP could you make better laptops, I will throw this kit out if this issue is not sorted with an update ASAP!

I have a similar issue where if any recording takes place, or the microphone is even accessed by a program, I lose all audio until I restart my computer. What's similar is that after this occurs, the microphone and line-in inputs both get muted automatically. Previously, audio in certain games didn't work for me as a result of this, but with a bit of playing around sometimes I can get it working. However, eventually (usually after around half an hour), the sound will just cut out in-game entirely and require me to restart once again (only happens in games that use a microphone in some way; Fallout 3 is unaffected but Call of Duty: World at War is, for example. I think it might be either a really rare driver issue or a hardware problem, at this rate.Message Edited by sear on 2-6-2008 04:0 PM

FME 3.0 issue with Osprey 440 card

Similar Messages

Maybe you are looking for