FMLE Bug: Encoder changes video input from Composite to SVHS

I have a video signal on the Composite input of my video card and I am encoding using FMLECmd.exe
The problem is that when I change the video input to "Composite" using the Video Device's Property Pages,
FMLECmd.exe sets it back to SVideo again after it stops encoding.
So, before each encode I need to bring up the Property Pages go and change the input to "Composite" again.
How can I work around this FMLECmd bug, any ideas?
Thanks.

FMLE saves Advance Device Property settings in profile file. When you change Input type to Comosite, make sure that you save a profile for that setting.
Next time when you start FMLECmd, start it with saved profile and it should work with Compsite input this time.
What you were doing is probably not closing FMLE after making changes in Device property page due to which settings are not getting saved in startup.xml profile and next time when FMLECmd starts with startup.xml by default it was loading prevoius settings having SVideo input.
So try closing FMLE GUI after changing device property page and then start FMLECmd with stratup.xml file or save these settings in some other proifle file and start FMLECmd with saved profile file
Let me know if this works for you?

Similar Messages

How can I change video screen from landscape to portrait. It is set to landscape since I updated to IOS 6. TY

How can I change video screen from landscape to portrait. It is set to landscape since I updated to IOS 6. TY

Is the screen-rotation lock on? If it is then there is a padlock shown in the upper right by the battery icon. To turn off double click the Home button and fully swipe the bottom row fully right past the music controls and tap the padlock.
Otherwise
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Touchsmart Iq506t Windows 7, Unable to acess s-video input from windows media center.

System: Hp Touchsmart IQ506T
Windows 7
Avermedia (A327) Hybrid mini Pcie Tv Tuner (NTSC/ATSC)
I purchase this system used without an operating system. I installed windows 7 and downloaded the drivers from Hp. All drivers are installed properly and the Avermedia (A327) mini card driver can be seen in device manager.
Yet, the A327 tv tuner will not give me access to the s-video input. I can get tv thru the rf connection but I want to use the s-video because it has a cleaner signal.
Any information about the s-video port will be appreciated..
Thank you..

Hi Cnmarsh,
I understand you are having an issue with the Touchsmart Iq506t with Windows 7, unable to access s-video input from Windows Media Center.
I read from your post that drivers are installed properly and the Aver media mini card drivers are seen in device manager.
I was wondering if the any of the drivers in Device Manager have a Yellow caution?
Also, is the Touchsmart Iq506t software all up to date?
You could try to download and run HP PC Hardware Diagnostics tool with this link.
http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_...
Looking forward to hearing from you.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Change tv input from s video to hdmi

Does anyone know if you can change the tv input from the s video cable to use the HDMI as input for watching TV on the Touchsmart 600-1050? The s video works ok but I thought that I read somewhere that you should be able to use the HDMI as an input source. So How do you change the tv tuner to use the HDMI instead of the S video cable? Thanks.
This question was solved.
View Solution.

There is a toggle button on the back right above the HDMI port which allows to go back and forth.

Flash Media Encoder Doesn't display my video input from my All-in-Wonder 2006 AGP card

I have a All-in-Wonder 2006 AGP video card that has multiple video inputs. I got Flash Media Live Encoder to see my video card but when I connected one of the many video inputs it would not display in Flash encoder video preview. The audio did not come through either. I'm running in Win XP and the video card model number I believe is All in Wonder 2006 AGP 256M NA.

What is the output format of this card? Is it encoded such as mpeg-2 or raw?

Profile.xml: how to select a video input (from number not name)

Hello,
I'm using FMEcmd in command-line mode with a custom
profile.xml
If I look at the profile.xml it looks like the selection of
the inputs (video and audio) is only possible by giving the full
name of the input (not just the input number like for Real Producer
or Windows Media Encoder).
The app. I'm developing will be used with a webcam and I dont
have the information about the model someone will be using (and the
user won't open the FME GUI to generate a profile).
Is it really not possible to select an input from its number
(as seen by windows)?
If not do you have any suggestion to overcome this
limitation?
Also I've played with <crossbar_input> but I'm not sure
what it means.
Thanks
<video>
<device> ToUcam Pro Camera; Video</device>
<crossbar_input>0</crossbar_input>
<frame_rate>15.00</frame_rate>
<size>
<width>320</width>
<height>240</height>
</size>
</video>
<audio>
<device>Appareil photo Philips ToUcam F</device>
<crossbar_input>0</crossbar_input>
<sample_rate>22050</sample_rate>
<channels>1</channels>
<input_volume>75</input_volume>
</audio>

Now that FME 2.5 is out I tried again. I still can't find the
possibility to select the source from number (like Windows Media
Encoder or Real Producer can).
Can someone confirm that this possibility is not present in
2.5?
Is there any slight chance it will be implemented in the next
version?
What work around do you advise?
Thanks for any answers.

Error message while trying to encode a video with afterFX composition involved

OK, so heres the thing. I wanna encode this video I made, in CS3, but every time I try, it says,
"the source and output color space are not compatible or a conversion does not exist"
This only happened after I tried adding an After Effects composition to the mix.
The After Effects comp is nothing more than a high res JPG spinning, which I made in illustrator and exported as a JPG (obviously).
I searched around the internet for this error and the help menu but cannot find anything that even comes close. The videos in the Premiere project are YUV 422 10-bit CCIR 601 non-compressed.
Anyone have any ideas?

it doesnt solve the issue
Maybe not. But it will get the job done, which is the higher goal here, no?

Video input from VHS?

I have an iBook G4 12" and have a need to get images off of VHS. Not having done this before, I was wondering what the best (and least expensive) means of doing so would be in terms of hardware and software.
Many thanks for any ideas, and apologies if this is a blindingly obvious query.

markbwilson, Welcome to the discussion area!
You essentially need a device to convert analog video from your VHS deck to a DV (digital video) stream.
One solution is to get an inexpensive mini-DV camcorder with digital pass through. This will allow you to connect the analog video out from the VHS player to the analog video ports on the camcorder. Then the camcorder will connect to your iBook via a 4-pin to 6-pin Firewire cable. You can then use iMovie to capture the video.
Another solution is to buy a dedicated analog video/DV converter box.
I prefer the first solution since you will also end up with a mini-DV camcorder to use.

Quicktime does not allow to change video position from streamed video

I just wanted to watch the newest Apple event stream. For many ears I have watched them typically from Mac as they works from there perfectly.
Now I installed quicktime for Windows (without iTunes) and I watched 34 minutes from the event. Then suddenly the sound went off from the quicktime. I tought the system sound went and I checked the volume and other player and they worked fine.
Then I tought it was about streaming problem and I allowed it to continue to 39 minutes. Then I tought I could scroll backward to position where the sound went off. But I couldn't at all. I can drag the position slider somewhere, but it always jump back to the place where it is streaming. When I stop mouse, it jumps back to current position. So if I keep mouse cursor moving and dragging same time the slider, it moves.
Neither I can not start a video (any video, was they a trailers or Apple event videos) and jump to the known position to continue watching.
So to me if I would now like to watch the latest presentation, I should watch first 40 minutes again. As I am not allowed to rewind to wanted position.
I tried this on my laptop as well and I got exactly the same problem (the scrolling).
Is it really so that Windows Quicktime does not allow rewind/forward functions at all on quicktime videos?
Is there tweaks to get that possibility as I do not want to watch 40 minutes and be sharp when it comes so I can continue where I left and not miss the position and never could rewind back?

QuickTime Pro does not allow to make video capture from desktop - only from camera. How can i solve this problem?
Use the QT X.1 Player to capture desktop video. QT 7 Pro does not and never has had this feature which was first introduced in the QT X.0 Player.

Flash 8 Video Encoder, audio/video discrepancy from mpeg

Two questions...
First, more urgently, I've been given an origianl
720xsomething mpeg format video, and I'm trying to bring it over to
flash... I use the flash 8 video encoder, which does a phenomenal
job of keeping video quality while vastly reducing file size, but
in this case, (unlike some others in the past) I'm getting a
bizarre discrepancy between the speed of audio vs. speed of
video... I can't find a way to force the mpeg (or flash encoder
software) to TELL me what the frame rate of the original mpeg is,
and even when i attempt to force it to 24 or 25 during conversion
to flv, it doesn't seem to bother matching it up to the audio...
when i take the result and export it from flash, i'll try, at 24
the video is going too fast for audio, but at 23 its going too
slow...
and this SEEMs related to 2nd question.. I took about 15
solid minutes of video of a particularly nice sunset in
progression, with the hopes of compressing it down to about 30-60
seconds for effect... but it seemed like, no matter what frame rate
I tried to compress it to with the encoder, it just drew each frame
out to a set length, and even if i tried to export the flash really
fast, it remained at the epicly slow frame rate...
is there a relation? what am I doing wrong?
is there a way to detect the ACTUAL frame rate of the
original mpeg... is there a way to force the audio and video to
remained sync'd up? Seems the that problem is, if i go with the
default 'Same as source' I'm left to guess what that might be when
exporting from flash, as nothing ever actually tells me what that
source frame rate actually was! Is there some natural audio
compression business inside mpeg video that works fine for mpeg
video, but the flash encoder can't handle well? I've tried it with
about a billion different frame rate, audio data rate, quality, and
export settings, and have yet to get a sync.
Thanks in advance!

I should have been more clear.
I changed the file name from .vob to .mpg and then tried to
add the video file to Flash 8 Video Encoder and received the
following error message:
"You won't be able to encode this file. Your computer doesn't
have the necessary codec or the file is corrupt."
Currently,
I use ffmpegx to convert the .vob to .dv and then, I import
the .dv into Flash 8 Video Encoder and convert it to a .flv....
I can use ffmpegx to go straight to a .flv, but the file size
is larger b/c the compression is different, not On2 VP6...
I would like to skip the middle step because my files are
very large and it takes extra time.

Changing video kind from movie to music video

help me please -- i have downloaded six music videos from itunes -- every one of them is listed as a movie and does not show up on ipod under music videos but they are on ipod under movies -- my settings are not on manual update and when i select info and go to video kind on each song the options are not able to be changed because the box is greyed out -- please help me put my music videos where they belong -- have been trying to fix for days on my own -- 60gb video ipod with itunes for windows

If these videos are music videos and not movies, and you have bought them off the iTunes music store, Id recommend emailing apple about it. you can email then here http://www.apple.com/support/itunes/musicstore/download/

ITunes Bug - iTunes changed video dimensions

I can't seem to figure this out:
Used Handrake 0.9.1 to create m4v movie file at 853 x 478 H.264, AAC
Finder shows the dimensions at 853 x 478
Quicktime shows the dimensions at 853 x 478
However, iTunes has the dimensions at 1011 x 478. What is going on here? How can that be possible? Of course, now I can't get the file on to my ipod or touch at this size.
Anyone have any solutions? I am trying now the feature in iTunes to covert the movie to play on an iPod. Do you think that will work?
Is there any other work around?

Hi Gary, welcome to Apple Discussions.
In summary the "bug" you are describing is this:
You can make a purchase from the iTunes store, which if you don't backup somewhere, it is possible for you to lose, either through hardware failure, loss, theft or an inadvertent sync.
The terms and conditions of the iTunes Store, set in part by agreements made with the various rights holders of the copyright material, permit a single download of each purchased item which you, as the end user, are encouraged to back up at the earliest opportunity. iTunes is no different from Amazon and other online digital resellers in this respect. There are stores which do permit subsequent downloads but it is not the standard model, at least with regard to media. Mobile Apps from the iTunes Store can be downloaded multiple times and it may be that over time the music industry will adopt the same model.
When using an iPhone or any other iDevice to makes purchases you should transfer these to an iTunes library as soon as possible and, further, you should also back up this library and and all its content.
In the event of an accident involving loss of data, e.g. a hard drive crash between purchase and backup then most stores will, if you explain the circumstances clearly and ask nicely, be prepared to allow a repeat download of the lost items, particularly if you are asking for one or two items rather than everything you've ever purchased. However there is no obligation for them to do so and while some users have had entire collections replaced that level of help will only be offered once, if at all.
If it matters to you, back it up...
tt2

Hotsync User ID being changed without input from me!

As far as I know -- with evidence in my data directories -- when I got my Tungsten I set it up with the user name "Wendy". A couple of days ago, when I got a handheld software registration code based on giving that to the software vendor as my user name, it would not work. When I investigated I found that the Hotsync User ID in my desktop software was "2008". Today, New Year's day, when I went to open another desktop component, SplashID, I found that all the data was gone. Lo and behold, when I went to do a restore, I found data folders for Wendy, 2008, and 2009! I then looked at the Palm desktop app and found that the Hotsync User ID there is now "2009"! Why is this happening and what can I do to nail down the user ID that I want?
Please note that I have also been suffering from periodic loss of my non-recurring calendar data. It seems to occur whenever an overnight Windows update takes place that causes my computer to reboot. Using the advice given in the posts responding to my previous message in these help forums, I have -- so far -- always been able to restore the data. I do not recall whether this and the change of hotsync user name started at the same time.
Post relates to: Tungsten E2

Look on your handheld in hotsync and verify the hotsync name in the upper right corner. This is the name hotsync and Palm desktop usues to ID the handheld for sync'ing.
At this point, I am not sure what is causing the username to change.
Are you using Palm desktop 6.2? If you are then you need to close Palm desktop if you are not using it. If you leave it open during a system, virus, or any other type of update, it can cause loss of data. This usually occurs with Palm desktop 6.2.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=tungsten&mn=e2&cn=unlocked
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Flash video encoder changes video size!

I have a 1920 X 1080 MOV video that I encoded. The Flash video that is resulting is a 1440 X 1080 FLV. Any idea why it is squeezing the video like this?
Thanks

Hey I got it mixed up..... This is Flash Media Encoder 2.
What I have is Flash Video Encoder CS3.
What additional features can I get with Flash Media Encoder
2? Can it still work together with my current CS3 suite?

Displaying video input from Firwire

I have a Firewire feed from a video camera and I just want to display it full screen, live not recorded. Photobooth will do it but it is mirror image. Can anyone suggest something else ?

QuickTime X > File > New Movie Recording provides an unmirrrored preview that nearly fills the screen if you expand its window. If Photo Booth can see your FireWire camera, QTX should as well.

FMLE Bug: Encoder changes video input from Composite to SVHS

Similar Messages

Maybe you are looking for