FN5V - No accounting entries generated

Hi
I am trying to post a accounting entries through the transaction FN5V however there are no accounting entries that are getting generated. When I run the transaction FN5V the transaction is however getting saved but no accounting entries.
In the SPRO node (>>Company Code-Dependent Settings for Product Type) I have specified FI posting as 4 and in the same node the >>Define status per product type FI posting is defined as 4.
I want to generate the follwoing entry to the Loans taken Banks DR
Loans Taken CR Please advise how I can shoot his problem Also is you have any document on loan management, would be greatful if you can share. Thanks S
Edited by: sapcounts on Nov 3, 2011 11:37 AM

Hi
Status 4 is correct in the configuration. can you please check are you save the transaction in FN5V or u are clicking in post button. If you can brief your error then it is easy to us to guide u. please check your disbursement flow type and account determination for the same.
Regards
Priya

Similar Messages

No accounting entry generated

Hi Experts,
We have created one tax code O8 in FTXP and assigned GL in OB40 but during sales invoicing it is giving error that no accounting entry generated(Message no. VF050) and also when we are booking customer sales invoice in FB70 with the same tax code O8 we are getting error that Tax code O8 country IN does not exist in procedure ZTAXIN. We have done all permutation and Combination but still not able to solve this error.Do we have to assign gl in VKOA and where do we assign ZTAXIN to Tax code is there any tcode for it.Kindly help me to solve this errror.
Sonal

Hi Vinay,
Check if you are using condition based pricing procedure(TAXINN or copied from here) for sales. If it is so, then maintain the tax codes for the condition types required.
Also check if the GL accounts have been maintained for the account keys in VKOA
For example if the condition type to be used is JIVP, then in VK11 for JIVP, maintain the tax code and percentage to be calculated.
Revert for any further clarification
Thanks and Regards,
anit

No Accounting Entry Generated for Order SES

Hi All,
We have created a Service PO through PR that is being charged to an Maintenance Order. The SES has been created and approved with the Material Document created but no accounting entry is generated. The GR non-valuated is unchecked.
As our Sandbox was just refreshed, I copied the and created a new PO from the old one and created an SES and the accounting entries were generated. Any ideas why this is happening?
Thanks

Is business function LOG_MM_MAA_1 active in your system? Also are you using multiple account assignments?
Check this note and apply the corrections if required:
1715475 - MAA2: ML81N/MIRO: false postings for Service PO

J2I8- No Accounting Entry generated

Hi all
I have an issue where I am trying to execute J2I8 but no accounting entry is getting generated at this screen. When I click on transfer credit, I get the message "Accounting Docs and Part 2 entries created. SERIAL NO: = 00000011.
But when I go to FB03 and check the entry, I dont see any entry.
Can any1 guide me as to where I am going wrong.
Thxs in advance
Hrishi

Here u r transferring cenvat credit..
This doc. will not there in FB03
Check for the GL account entry
Check RG23C register..

No Accounting entry generated at J2I8

Hi all
I have an issue where I am trying to execute J2I8 but no accounting entry is getting generated at this screen. When I click on transfer credit, I get the message "Accounting Docs and Part 2 entries created. SERIAL NO: = 00000011.
But when I go to FB03 and check the entry, I dont see any entry.
Can any1 guide me as to where I am going wrong.
Thxs in advance
Hrishi

Dear Hrishi
Pl check the no. range of CIN area i.e. spro->lg->tax and goods movement->india>tools>no.range as pre object j_1irg23c1/c2 - set the no.
wbr
Avijit

Production order settlement (Accounting entries)

Dear Sapians,
I need your advice to clear my following confusion:
I have a finished material which is maintained on Variable price in material master. Assume the price being 100 and only 1 item is in stock currently.
My production department produces 1 qty of the same material now and the total cost of that comes to 500.
Now when the finished goods GR is done to store. The material price booked is picked from the current material master price (i.e) 100. The system posts the following entry
FG Stock A/c Dr 100
   To Cost of good sold 100.
Now the production department is doing the settlement of the above production order. After settlement my material master price changes from 100 to 300 (i.e) 2*300=600. (I find no accounting entry generated during settlement) What actually happens during settlement?
When the goods is delivered(PGI) for sale to the customer. (eg) we sell one unit
The system passes the following entry:
Cost of goods sold A/c Dr      300
To FG Stock A/c                    300
I this above case i feel that my finished goods stock will go negative.
Is the above activity correct?.
I will be greatful if you can explain me the above process completely.
Regards
Naveen

Dear Deepak
Thanks for all your help. I have assigned the maximum point which i can for your support.
Actually the accounting entries i was looking for is as follows:
When 101 is done after production (i.e) GR after production
FG STock A/c
To Factory output A/c
The above entry is posted @ price maintained in the material master.
When the actual settlement of Production order is done using tcode KO88 the system posts the variance between the material master price and the actual price and posts
FG Stock A/c DR
To Factory output A/c
(in case of actual cost is more than the material master price)
OR
Factory output A/c
To FG Stock
(In case of actual cost is less than the material master price)
Please correct me if i am wrong
Once again thanks for you time
Regards
Naveen

Accounting entry problem for cancel billing document

Hi,
We have manufacturing process for SO to DC we follow the proces
Sales order -> delivery -> VF01 -> J1IIN -> VF02 release to accounting,
now when we do the above procees in billing document document flow we can see two accounting entry generated ref. to t. code VF01 and billing document number
now to reverse the above, we are following the procedure
J1IIN reverse -> VF02 cancel billing document we get new cancel billing document numbver then again in VF02 we are releasing the cancel document number,
but earlier when we do the cancelation procedure only two accounting entries were generating under the original billing document and also under the cancel billing document, but now as soon as we reverse the invoice in J1IIN under the original billing document one additional accounting entry is coming which is generated ref. to T. code J1IH document type JM , and when we cancel and release the billing document there are three accounting entery under Cancel billing document number and additional entry is created ref. to J1IH do. no. JM
so what can be the problem hiw one entry is generated by J1IH and what is eefect of this.
regards,
zafar

in billing document document flow we can see two accounting entry generated
Yes this is standard. One for customer debit and another accounting document for excise.
thanks
G. Lakshmipathi

During goods returns same accounting entry as when good issue

Hi,
In our project we have a condition that charge on a provision account during goods receipt of a purchase document. Hers the accounting entries generated is ok. However we also create purchase order with return item. During goods issue (mvt 161) the accounting entries created is same as the goods receipt instead of being the inverse.
I do not understand how this is determine and will be grateful if you could help me. Thanks.

hi,
Check the details and TE key which is hit while 161..
If its correct then go to OBYC and check the G/L account which is getting hit in the inverse for your transaction...whether it is properly set or not...
it may be possible that instead of deibt it would be getting credit n visa versa....
Regards
Priyanka.P

Accounting entries for ARE1

HI
For exports under LOUT when we create a ARE1 form . We also post this ARE1 form Can you please let me know what are the accounting entries generated here, as we donot have an accouting entry for Exicse duties at excise invoice level for exports under LOUT.
Thank you.

Hi Rithvika ,
Thats true as we are not paying any duty under LOUT no accounting entries should be generated at the time of post of ARE1 form.
To further discuss..
For Exports under rebate when we post and ARE1 form then we have accouting entries where can we see them.
and I am facing another issue while creating excise invoice for Exports under LOUT selecting LOUT as excise invoice type and savingg the document no issue in that but while creating an ARE1 form from J1IA101 create ARE1 form system is asking for a Bond number . here in our process we do not use bond for exports its by Letter of undertaking please advice me how to go about this.
Thanks.

Accounting entries generation within the production cycle

Dear Experts,
Please which of these steps in the production cycle is or are Accounting Entries generated, and how do I check or see the accounting entries?
1. Creation of production order
2. release of production order
3. confirmation of production orders
4. posting from quality inspection to unrestricted (mvt type 321)
5. transfer of stock to sales warehouse (mb1b, mvt type 311)
6. Technical completion of the order
7. order settlement (ko88)
8. closing of the order

Hi,
1. Creation of production order
2. release of production order
3. confirmation of production orders
4. posting from quality inspection to unrestricted (mvt type 321)
5. transfer of stock to sales warehouse (mb1b, mvt type 311)
6. Technical completion of the order
7. order settlement (ko88)
8. closing of the order
Accounting enries will be generated in step 3 , 5, 7
Go to CO03--Display Production order
Click on Tab GotoLists-Documented Goods movement
Click on the Materrial document --Dispaly material document
now click on Accounting Documents , You will be displayed Documents in Accountings
Thanks,
Rajanikanth

Third party accounting entries

Hi SD Gurus,
Could you please tell me what are accounting entries in Third party sales process.
Thanks & Regards,
Nivas

Hii,
In Third party the same accounting entry generates as like normal invoice for Customer
For Third Party Customer entry is
Customer             Dr.
Discount              Dr.
Sales Revenue   Cr.
Taxes                 Cr.
Invoice Varification of Vendor   (MIRO)
Vendor         Cr
GR/IR    Dr
Regards
Shambhu Sarkar
Edited by: SHAMBHU SARKAR on May 15, 2011 11:12 AM

Intercompany Purchase Order-Accounting Entries.

HI Guys,
could anyone please guide me what is the process for doing intercompany PO and what are the accounting entries generated as a result of it.Thanks
Regards
Shaun

Hi,
The process of Inter Company PO, is as follows,
the sender(provider) of the good/services will create the PO and send that one to the receiver(requestor),
then the requestor has to approve that PO and send that back to the Provider..
Then on approval of requestor, the provider will deliver the goods.
Regarding the accounting entries, the entries are same as the general entries between a vendor and a company or customer and a company.
Regards,
Satya

Credit memo accounting entry issue

We have configure credit memo in SD. Sales order type ZCMN with item category G2N
Create a pricing procedure ZCMNV with condition type ZCRP. This condition class selected as "price"
Assigned Acckey As Z00.
Defined VKOA As "V KOFI RCOA FERT 01 04 Z00 682001".
Billing Document shows
Item         Description                            Billed Qty     SU       Net Value     Material
10           THAL - UREA-BAGGED(FG) 0.620           MT      0.78-           500000342
20           THAL - UREA-BAGGED(FG) 2                  MT      2.52-           500000342
30           THAL - UREA-BAGGED(FG) 3.420           MT     4.31-            500000342
Accounting Entry generated as
Customer A/c           DR
Discount A/C            CR
which is Wrong.
It should be like
Customer A/c           CR
Discount A/C            DR
Kindly Suggest what is wrong in the config process.
Regards
Sanjay

Attaching screen shot of FI doctype config and actual accounting entry posted in FI
Accounting entry for the posted document:

Accounting Entries for OSP PO if the Job Order is closed

Hi,
Would like to know the accounting entries generated if we receive and deliver a OSP PO if the Associated job is closed
thanks
Ravindra

hi,
To my knowledge if an open Po exist for a job then its not possible to close the job.
and if u hav closed by ur own customisation, then the PO item price reflects in purachase price variance account.

Accounting entry - WIP, Variance Calculation & Settlement of Production Orders

Hi All,
Please explain the process of WIP calculation, variance and settlement of production orders. At each stage will there be an accounting entry generated?
1. WIP calculation: All production orders for which the status is REL at the month end will be included in WIP calculation. How the amount of WIP is derived and what will be the accounting entry.
2. Variance calculation: Production order needs to have the status TECHO in order to do the variance settlement. Will there be an accounting action and how the amount will be calculated?
3. Settlement of Production Orders: Dr. WIP A/c (Balance Sheet a/c)
                                                    Cr. Volume Variance WIP a/c (P&L Account)
    Is this the correct accounting entry? If yes, please advice how the WIP a/c is showing balance on settlement of production order, how it will get nullified? If no, please advise on the correct process?
Regards

Dear Andy
In product cost by order scenario the WIP or Variance calculation is dependent on order status. If the Order has a status of REL or PDLV, the system will calculate WIP and if the order status is DLV or TECO the system will calculate variance on this order. At the time of calculation of WIP or Variance no accounting entry i generated but when you settle the order at that time FI documents are passed in the books.
Ans1- In product cost by order WIP or variance is calculated based on the actual cost debited to the order and value of GR made to the order. System does calculation by the formula GR value-(GI value+Activity value+ Overheads)
Ans2- As I said at the time of calculation no FI entries are passed but at the time of settlement FI entries are generated. The method of calculation is the same as described in Ans1.
Ans3- Entry at WIP settlement WIP (P&L) a/c Dr and WIP Offsetting(B/S a/c) Cr.
          Entry at variance settlement : Variance a/c dr/cr and COGM cr/dr.
          and if there is already a WIP posted for this order then at settlement WIP entry is reversed provided we have calculated WIP again the the month of settlement of variance
Note for Anand: Dear Anand we need to calculate WIP again in the period when the order status is changed to DLV or TECO otherwise system will not pass reversal entry of WIP. Kindly test it in your IDES and let me know if you find something on the contrary.
Regards
Rajneesh Saxena

FN5V - No accounting entries generated

Similar Messages

Maybe you are looking for