Forceing user to do AMR in CJ02 at the time of  SAVE.

Hi Experts,
While using CJ02 (PS), at the time of giving WBS elements and thereafter its processings user wants that at the movement of saving,  program should force the user to do the AMR for that WBS element.
How can we accomplish it ?

i am still a bit confused
if you are having an investment project then you will have investment profile
now when you release automatically AuC will be created
on settlement the debit will be transferred to the AuC
how can you ask the user to create AMR - asset master record in this case??
AMR for AuC is automatically created
The AMR for final asset has to be initiated by the user and the user must create it preferably from CJ20N rather than AS01 so that the distribution rule automatically sets in.
There is a BADI in 4.7 for final asset creation which should be used but the user will have to set a status of some sort to tell the system that final asset can now be created

Similar Messages

  • User Exit EXIT_SAPLV60B_002 not accurate 100% of the time

    Hi.
    we use the above user exit to bring the delivery # to the customer & gl lines of an accounting document. this works 100% of the time for the gl line (user exit EXIT_SAPLV60B_004), but not 100% of the time for the customer line (user exit EXIT_SAPLV60B_002). 
    below is the include & code we have.  does anyone have suggestion as to how the customer line can be accurate 100% of the time?
    INCLUDE:  ZXVVFU02
    CODE:  Read table CVBRP index 1. XACCIT-XREF1 = CVBRP-VGBEL.
    thx

    You requirement is to check the constrain based on scheduling . THere  is not user exist I believe that may exaclty address your requirement.  THan also check below two user exit.
    CNEX0028  Check activity release
    CNEX0029  Check network release
    Ideally yhou should chekc for hte some BAPI for hte network save will help you .
    Regards
    Nitin P.

  • User Exit for ME21 PO Creation at the time of saving--Urgent

    Hi,
    Can some one help me out in finding the user exit for PO creation at the time of saving.
    The Requirement is:
    I need to create a custom field in EKKO table.
    After appending the structure with the field to the EKKO table, i need to create a PO.
    Now i need to update the field which has been created at the time of pressing the SAVE button.
    I need to update the EKKO table it self.
    I could find the user exits but none of them have the EKKO table either in Changing or in Tables.
    Thanks,

    Hi,
              You may want to check this user exits.
    EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
    EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
    Here is the list of available user exits for ME21.
    EXIT_SAPMM06E_001 - Other Number Range or Own Document Number
    EXIT_SAPMM06E_004 - User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
    EXIT_SAPMM06E_005 - Field Selection Control: Vendor Address Screen
    EXIT_SAPMM06E_006 - Export Data to Customer Subscreen for Purchasing Document Header (PBO)
    EXIT_SAPMM06E_007 - Export Data to Customer Subscreen for Purchasing Document Header (PAI)
    EXIT_SAPMM06E_008 - Import Data from Customer Subscreen for Purchasing Document Header
    EXIT_SAPMM06E_009 - Reset Customer Data at Beginning of New Document (Without Dialog)
    EXIT_SAPMM06E_012 - Check Customer-Specific Data Before Saving
    EXIT_SAPMM06E_013 - Update Customer-Specific Data in Purchasing Document
    EXIT_SAPMM06E_014 - Read Customer-Specific Data when Importing Purchasing Document
    EXIT_SAPMM06E_016 - Export Data to Customer Subscreen for Purchasing Document Item (PBO)
    EXIT_SAPMM06E_017 - Export Data to Customer Subscreen for Purchasing Document Item (PAI)
    EXIT_SAPMM06E_018 - Import Data from Customer Subscreen for Purchasing Document Item
    EXIT_SAPMM06E_020 - User Exit: Change Document for Requisitions (Conversion into PO)
    EXIT_SAPMM06E_021 - Fulfillment of Target Value: Release Orders Against a Contract
    <b>Reward points</b>
    Regards

  • User Exit for ML81N  at the time of save -- urgent

    hello all,
    I need to fill the field reference field in ML81N transaction with some value for this i need to find user exit i was able to find so many user exits for this transaction but i couldn't find the perfect user exit at the tiem of save,
    Any pointers wouls be of great help..............

    Hi,
    check these 2 threads.
    User exit in ML81N
    Urgent. Badi or user exit for ML81N transaction
    Regards,
    Maha

  • Force user to connect to specific Persistent Chat server

    We plan to have 2 persistent chat servers in a single pool that will span 2 sites.
    1 Persistent Chat server in Site A
    1 Persistent Chat server in Site B
    Is there a way to force users in Site A to connect to the Persistent Chat server in Site A and for users in Site B to connect to the Site B Persistent Chat server?

    That is possible.
    For example, you have on DNS server DC01 in site A, and you only have a DNS A record point to the IP address of persistent chat server in site A, then you use DC01 as the DNS server for users in site A.
    You have on DNS server DC02 in site B, and you only have a DNS A record point to the IP address of persistent chat server in site B, then you use DC02 as the DNS server for users in site B.
    But it is not recommended. If one persistent server is down, users in one site won’t have group chat feature.
    Lisa Zheng
    TechNet Community Support

  • User Exits for FI transaction at time of 'Save'

    Hi All,
    I'm looking User Exits for the FI transaction - FBD1.
    I used CMOD to identify the user Exits available for the 'FBAS' package:
    F050S001 - FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment   
    F050S002 - FIDCC1: Change IDoc/do not send                          
    F050S003 - FIDCC2: Change IDoc/do not send                          
    F050S004 - FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send 
    F050S005 - FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document  
    F050S006 - FI Outgoing IDoc: Reset Clearing in FI Document          
    F050S007 - FIDCCH Outbound: Influence on IDoc for Document Change   
    F180A001 - Balance Sheet Adjustment                                 
    FARC0002 - Additional Checks for Archiving MM Vendor Master Data    
    RFAVIS01 - Customer Exit for Changing Payment Advice Segment Text   
    RFEPOS00 - Line item display: Checking of selection conditions      
    RFKORIEX - Automatic correspondence                                 
    SAPLF051 - Workflow for FI (pre-capture, release for payment)       
    However I'm looking for an user exit that is called at the time of 'Save'. I'm looking to make some changes
    so that no entry can be posted in the above transactions until a document has been attached. None of the User exits above seem to be available at the time of 'Save'.
    Is there any OSS note for a User Exit/BADI that can be used at the time of 'Save' for these transactions?
    Thanks in advance..
    Deepika.

    Hi Deepika,
      for your requirement you can use FI substitutions (entire document). Check transaction GGB1. They allow to change fields from FI tables (BKPF,BSEG,BSIK,BSAK, etc...)
    Please remember to reward points if the answer is useful and eventually to close the post if it solves your problem.
    Regards, Manuel

  • User exit CATS0003 on loading of record working time screen

    Hi Experts
    this is continuation to my last thread
    ESS CA-TS Missing time sheet,
    the requirements remains the same and I just need to confirm below thing
    Does cats enhancement user exit CATS0003 will trigger initially at the time of loading the data entry page (record working time screen) in ess? so that before entering the time itself users will get to know that they need to fill previous weeks time before continuing,
    experts pls confirm.
    Jo

    If you want the end user to know what attributes to save time on, Try to make use of template
    or A worklist!
    Other than this you can just use Default values from Cac1 and Infotype 0315, Just check the docs
    on this
    Also a simple cats0002 can be used to supplement the recorded data

  • RE: Force user to re-login if the application is idle for awhile!

    Hi,
    I a similar thing a little while ago for an application written in a 4gl (not Forte) running
    windows 95 clients. I ended up dropping out to "C" and using the SDK to install
    hooks which monitored certain mouse and keyboard events to the application.
    It ended up being less than 10 lines of code in the end whereas when I tried
    to do it within the 4gl it was looked like wholesale changes to lots of code.
    This option fell down when the user was reading their help file or updating
    a word document so we added a pop-up which came up at the front of all applications
    on the PC giving the user a further minute to respond so as not to annoy the genuine
    user who was still "there" but doing something else.
    I have not had the chance to try this in Forte yet but it should be possible.
    If you think this might be an option for you I will try and cobble together an
    example.
    Dalton
    ===============================================================
    Dalton Cranston 45 Castle St.,
    GO5 Ltd Reading. RG1 7SN
    E-mail: [email protected] United Kingdom
    URL: www.go5.com Phone: +44 (0)1189 589 555
    Fax: +44 (0)1189 587 467
    -----Original Message-----
    From: Lu Wang X1 [SMTP:[email protected]]
    Sent: 13 February 1998 17:45
    To: [email protected]
    Subject: Force user to re-login if the application is idle for a while!
    Hi;
    For some security reasons, it requires our Forte application to force user to
    re-log into the application if the user doesn't use this application for 10
    minutes. The problem and difficulty to us is that how to determine there is no
    activity going on for this application on the client's PC.
    Any thought and ideas will be greatly appreciated!
    Lu Wang
    Eli Lilly and Company
    [email protected]
    (317)276-5776

    Hi Rick,
    Thanks for the Reply.
    When they are doing some action with RF id system gave DUMP - ITS_TEMPLATE_NOT_FOUND.
    With this is there any efect on Table locking.
    We got the dump on the ITS screen where as at the same time in back end ECC system TABLE data is using.
    Thanks
    Naresh

  • How to force user to enter supplier/customer name in captial letters in R12

    Dear all,
    Could anyone pls advise how to force user to enter supplier/customer name in captial letters in R12? Can I do it using OA framework personalization?
    HY

    Pl post exact versions of OS and EBS.
    The ability to do this exists in forms (professional user interface) using forms personalization, but does not exist in the OAF (self-service) interface, AFAIK. See related MOS Doc 399892.1 (Is It Possible To Restrict Employee Name Entry To All Upper Case in the PUI And SSHR ?) for some details.
    Pl confirm by opening an SR with Support.
    HTH
    Srini

  • Forcing user to enter values at table level

    Hi,
    I have created a table ztest. How to force user to enter the values for certain fields in the table which are not keys, similar to not null in RDBMS. selecting the initial values filed in SE11 populates with some default value, but it doesnt force the user to enter the value.
    Regards,
    Raghu

    Hi,
    Just check out transaction code SE54 for events.
    Go in SE54.
    Give your table name.
    Go in Environment --> Events.
    Here add the Event '01' i.e. Before saving the data.
    Give the name for event eg 'BEFORE_SAVE'.
    Click on Editor to create an include program.
    In the include program write
    form before_save.
      data: f_index like sy-tabix. "Index to note the lines
      loop at total.
        if <action> = 'N' or <action> = 'U'.
          read table extract with key <vim_xtotal_key>.
          if sy-subrc eq 0.
            f_index = sy-tabix.
          else.
            clear f_index.
          endif.
          "(make desired changes to the line TOTAL)
          "End of Modification.
          modify total.
          check f_index gt 0.
          extract = total.
          modify extract index f_index.
        endif.
      endloop.
      sy-subrc = 0.
    endform.
    Note here in field symbol 'Total' your workarea will be their. You can make necessary checks here.
    Or else you can go for making a custom transaction for your requirement.
    Regards,
    Nitin
    *Mark all helpful answers

  • Force user to enter text if checks YES check box

    I have created a form with YES and NO check boxes.  If user checks YES, they need to provide written reason.  Is there a way to "force" user to enter text into text box if they check the YES check box?
    Thanks,
    Toyro

    Hi Jodi,
    Yes, it has to be saved as a dynamic PDF.
    Additionally, there are some name mismatches in your form so the script was failing. My script defined page 1 as 'page1' while your form defined page 1 as 'Page1'. I renamed your form page 1 to 'page1' and the script worked fine.
    I would recommend enabling the debugger in Acrobat for form developement. See Edit > Preferences and enable the following:
    I added an additional button with some script on the button 'click' event.
    The purpose is to intervene in the submission process, in your case submitting by email. With a single submit button the email dialogue fires regardless of failed form validation. By introducing a second button you can do form validation before enabling submission. The attached form has a visible button called 'submitBtn' and your original 'Submit By Email' button which is declared as 'invisible'. My 'submitBtn' is labelled 'Submit By Email'. When the button is clicked is does form validation. If validation succeeds, I call form1.page1.Button1.execEvent("click"); to submit to the email address attached to 'Button1'.
    Take a look and see if it fits your requirements.
    Steve

  • Forcing users to select existing properties in New User Request form

    Hi,
    We have just started using Service Manager and Orchestrator.  So far we have successfully managed to create user accounts using orchestrator and service manager.  Now we want to start forcing users to utilise the information we already have in
    our existing Active Directory environment.
    So for example, in the new user request form we want users to select an existing "office" using the attributes already in Active Directory as opposed to allowing them to type in an office and potentially accidentally misspelling the office name.
     What we would like to see is a unique list of offices and a user to select  
    How can this be achieved?  Any help would be greatly appreciated.
    Thanks

    Well, if you don't want to create a list manually, create a sealed management pack that defines the root of the new enumerator. Then create a workflow that will pull all users from AD, build the list of the locations used in AD and update the child enumerators
    if required.
    Cheers,
    Marat
    Site: www.scutils.com 
    Twitter: LinkedIn:
    Graveyard:

  • Applet forcing users to re-authenticate

    I have an applet that accesses a secure servlet using the URL object. The applet is inside a secure web application deployed in JBoss. When I load any pages without applets, everything works fine (if it is my first load, I will be forced to authenticate myself as expected).
    The problem is when I try to access an html page that renders an applet via the object tag (using plug-in version 1.4). A new dialog box pops up with a picture of Duke on it and titled "Enter Network Password". It forces the user to re-authenticate themselves.
    Is there any way I can suppress this dialog in my applet? Obviously the user shouldn't have to login twice. I have seen similar people posting a similar complaint in other forums (excuse the long link): http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Bapplet+%2B%22enter+network+password%22&col=java&col=jdc&col=wireless&col=javaforums&col=javabugs&col=industry&col=solmark&col=codedrop&x=17&y=6
    but the only response I saw of any help was that it was a bug, but was fixed in version 1.3.1 of the plugin. Well I'm using 1.4 version and it still doesn't work for me.
    Any suggestions?
    Andrew

    Suggest investigating whether the proposed workaround involving enablement of Anonymous access/authentication defeats authentication before implementing it. My tests in a similar environment have shown that the workaround appears to defeat authentication. Makes sense as there is a reason Sun is addressing the issue (jdc bug #s 4518282, 4656979).
    These tests can be tricky...Eg. IE likes to remember u/ps, etc. & you may need to close all IE sessions & "delete temp files / delete all offline content" between client tests.
    Prior to this test we had only Basic Auth enabled for both external/SSL access & separately internal/LAN non-ssl dirs. Since you cannot use proprietary/MS-only auth prots, only Basic Auth with req. SSL encrypts u/p.
    Anyway, here's what I did in a test environ:
    1) Create new user account as target user (non-guest) for Anonymous access. Assign non-blank password (tried pass sync on & off - no diff).
    2) Enable anonymous access using the new user account. Leave Basic Auth enabled too (just those two enabled).
    3) Roam around & try to access the app from rebooted/cache-deleted client boxes.... Found that you are never asked for the password of the anonymous user (no surprise, that's what anonymous means & is for:)
    4) As this apparently defeated authentication, rolled back test environs to prior state & am awaiting "mantis" release which might fix this properly.
    Didn't really need to test this but had the time... The regression bug (from 1.3.1 -> 1.4.1) of having 2nd logon for SSL-protected basic auth sites is a big disappointment, but is attributed to incorp/use of JSSE HTTPS/SSL in plug-in instead of using browser's API. Perhaps the mantis fix implements code to query/use credentials known/cached within the browser?
    Good luck,
    Chris

  • Remote Desktop Connection attempted with 2 users already connected no longer gets dialog showing who is connected and option to force user off

    On Windows 2008 Server R2, when the maximum number of users are connected via Remote Desktop (2) and another user attempts to connect via Remote Desktop, the user is prompted with a login dialog. Upon login, a dialog is shown with the User Id's of the
    users who are connected, their current state (active or idle for x minutes) and it gives you the option to request access from a user or to force a user off. Recently our server stopped displaying this message and now only gives an error message that it cannot
    connect. It does not show the login dialog, just an immediate connection error message. So now we don't know who is logged into the server. This presents a problem with many users who need to deploy software or manage server resources. What setting could have
    changed that would stop displaying the login and the current users dialog? Thanks!

    i can't seem to reproduce this, I played around with my server's NLA settings, looked at RDS GPOs, the options in the RDP listener, checked the user account in AD, just can't see what would be blocking this
    would it make a difference if one of the RDP spots is occupying the server's console or not?
    are the users trying to come in when the two sessions are already used up using the /admin or /console switch?
    in the meantime, you can try using tsadmin.msc to kick people off
    you may also want to try testing this with various different OS and RDP client versions to see if that's the issue. win7 with RDP 8.1 client doesn't seem to have any problems for me

  • FB50 - force user to add attachment

    Hi,
    Is there a way to force user to add attachment in FB50 before allow user to post the entry? In other words, the FB50 entry should not be post into SAP if user did not attach any document. Please advice. Thanks.

    Hi
    Please refer the below link
    Email Billing document as PDF Attachment while saving from VF01/02
    http://www.whypad.com/posts/sap-attach-documents-to-a-journal-entry/45/
    hope this will help you
    regards
    Praveen P C
    Edited by: Praveen Chirakkel on Apr 13, 2011 6:06 AM

Maybe you are looking for